Attachment 66091 Details for Bug 146781

dump of dmesg

dmesg.txt (text/plain), 13.62 KB, created by Daniel Daugherty on 2006-02-01 20:41:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Daugherty

Created: 2006-02-01 20:41:34 UTC

Size: 13.62 KB

patch

obsolete

>Linux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000014000000 (usable)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>320MB LOWMEM available.
>On node 0 totalpages: 81920
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 77824 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>Allocating PCI resources starting at 14000000 (gap: 14000000:ebfc0000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda1  splash=silent acpi=off
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 801.561 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 319064k/327680k available (2029k kernel code, 8064k reserved, 695k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1606.87 BogoMIPS (lpj=3213748)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 64K (64 bytes/line)
>CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: AMD Duron(tm) Processor stepping 01
>Enabling fast FPU save and restore... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1722k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfa174, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Using IRQ router VIA [1106/0686] at 0000:00:14.0
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 40000000-40ffffff
>  PREFETCH window: 41000000-47ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1138802332.352:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: Disabling Via external APIC routing
>vesafb: framebuffer at 0x44000000, mapped to 0xd4880000, using 6144k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=0
>vesafb: protected mode interface info at c000:b540
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:14.1
>VP_IDE: chipset revision 16
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
>    ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
>hda: cache flushes not supported
> hda: hda1 hda2
>Probing IDE interface ide1...
>hdc: Compaq CRD-8484B, ATAPI CD/DVD-ROM drive
>hdd: LG CD-RW CED-8083B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>ReiserFS: hda2: using ordered data mode
>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda2: checking transaction log (hda2)
>ReiserFS: hda2: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>bootsplash: status on console 0 changed to on
>Adding 642560k swap on /dev/hda1.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>lp0: using parport0 (interrupt-driven).
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (2560 buckets, 20480 max) - 248 bytes per conntrack
>Linux video capture interface: v1.00
>8139too Fast Ethernet driver 0.9.27
>PCI: Found IRQ 5 for device 0000:00:05.0
>eth0: RealTek RTL8139 at 0xd5194000, 00:10:b5:b2:70:ba, IRQ 5
>eth0:  Identified 8139 chip type 'RTL-8139B'
>ivtv_tveeprom: module not supported by Novell, setting U taint flag.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>PCI: Found IRQ 11 for device 0000:00:14.2
>PCI: Sharing IRQ 11 with 0000:00:14.3
>uhci_hcd 0000:00:14.2: UHCI Host Controller
>uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:14.2: irq 11, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Found IRQ 11 for device 0000:00:14.3
>PCI: Sharing IRQ 11 with 0000:00:14.2
>uhci_hcd 0000:00:14.3: UHCI Host Controller
>uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:14.3: irq 11, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA Apollo Pro 133 chipset
>agpgart: AGP aperture is 64M @ 0x50000000
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>    ACPI-0768: *** Warning: Thread 9C7 could not acquire Mutex [<NULL>] AE_BAD_PARAMETER
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>PCI: Found IRQ 10 for device 0000:00:04.0
>PCI: Sharing IRQ 10 with 0000:00:04.1
>PCI: Sharing IRQ 10 with 0000:00:14.5
>bttv0: Bt878 (rev 17) at 0000:00:04.0, irq: 10, latency: 66, mmio: 0x48100000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>i2c-algo-bit.o: (0) scl=1, sda=1
>i2c-algo-bit.o: (1) scl=1, sda=0
>i2c-algo-bit.o: (2) scl=1, sda=1
>i2c-algo-bit.o: (3) scl=0, sda=1
>i2c-algo-bit.o: (4) scl=1, sda=1
>i2c-algo-bit.o: bt878 #0 [sw] passed test.
>tveeprom: Hauppauge: model = 44801, rev = D110, serial# = 6067774
>tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>tveeprom: audio_processor = None (type = 0)
>tveeprom: Hauppauge: model = 44801, rev = D110, serial# = 6067774
>tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
>tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
>tveeprom: audio_processor = None (type = 0)
>bttv0: using tuner=2
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>tvaudio: TV audio decoder + audio/video mux driver
>tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>usb 1-2: new low speed USB device using uhci_hcd and address 3
> : chip found @ 0xc2 (bt878 #0 [sw])
>tuner 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: PLL: 28636363 => 35468950 .. ok
>via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xaddr
>vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - upgrade BIOS or use force=1
>PCI: Found IRQ 10 for device 0000:00:14.5
>PCI: Sharing IRQ 10 with 0000:00:04.0
>PCI: Sharing IRQ 10 with 0000:00:04.1
>PCI: Setting latency timer of device 0000:00:14.5 to 64
>usbcore: registered new driver hiddev
>input: USB HID v1.00 Keyboard [Compaq Compaq Internet Keyboard] on usb-0000:00:14.2-1
>input,hiddev96: USB HID v1.00 Device [Compaq Compaq Internet Keyboard] on usb-0000:00:14.2-1
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:14.2-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>bootsplash: status on console 0 changed to on
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
>NET: Registered protocol family 17
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 not a capable Intel processor
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>powernow-k8: Processor cpuid 631 not supported
>powernow: No powernow capabilities detected
>eth0: no IPv6 routers present
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.148 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.148 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>usb 1-2: USB disconnect, address 3
>usb 1-2: new low speed USB device using uhci_hcd and address 4
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:14.2-2
>SCSI subsystem initialized
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>lp0: using parport0 (interrupt-driven).
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>lp0: using parport0 (interrupt-driven).
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>lp0: using parport0 (interrupt-driven).
>ppa: Version 2.07 (for Linux 2.4.x)
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0

Actions: View

Attachments on bug 146781: 65797 | 66036 | 66091 | 70422 | 70614 | 70930