Attachment 66159 Details for Bug 145747

dmesg of beta3 kernel

dmesg (text/plain), 20.93 KB, created by Bodo Bauer on 2006-02-02 10:54:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bodo Bauer

Created: 2006-02-02 10:54:49 UTC

Size: 20.93 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/hda6 vga=0x365 selinux=0    resume=/dev/hda2  splash=silent)
>Linux version 2.6.16-rc1-git3-7-default (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #1 Mon Jan 30 21:52:12 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
> BIOS-e820: 000000003fef0000 - 000000003fefb000 (ACPI data)
> BIOS-e820: 000000003fefb000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f6a80
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x000000003fef4900
>ACPI: FADT (v001 ATI    Firanha  0x06040000 ATI  0x000f4240) @ 0x000000003fefadff
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x000000003fefae73
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x000000003fefaf6a
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x000000003fefafc4
>ACPI: DSDT (v001    ATI    SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>On node 0 totalpages: 257347
>  DMA zone: 3095 pages, LIFO batch:0
>  DMA32 zone: 254252 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ATI board detected. Using APIC timer.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Checking aperture...
>CPU 0: aperture @ 460000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: root=/dev/hda6 vga=0x365 selinux=0    resume=/dev/hda2  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2000.144 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>PCI-DMA: Disabling IOMMU.
>Memory: 1024576k/1047488k available (1804k kernel code, 21940k reserved, 787k data, 168k init)
>Calibrating delay using timer specific routine.. 4008.48 BogoMIPS (lpj=8016965)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Turion(tm) 64 Mobile Technology ML-37 stepping 02
>checking if image is initramfs... it is
>Freeing initrd memory: 2507k freed
> not found!
>Using local APIC timer interrupts.
>Detected 12.500 MHz APIC timer.
>timer: PIT interrupt stopped.
>testing NMI watchdog ... OK.
>DMI present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>ACPI: Subsystem revision 20050902
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0297: *** Warning: Could not execute arguments for [PBST] (Package), AE_NOT_FOUND
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>    ACPI-0243: *** Warning: Handle is NULL and Pathname is relative
>    ACPI-0243: *** Warning: Handle is NULL and Pathname is relative
>    ACPI-0243: *** Warning: Handle is NULL and Pathname is relative
>    ACPI-0243: *** Warning: Handle is NULL and Pathname is relative
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>burst-mode-ec-10-Aug
>ACPI: Embedded Controller [EC0] (gpe 16)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:02.0
>  IO window: 9000-9fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: c8000000-cfffffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: c0200000-c02fffff
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:09.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 50000000-51ffffff
>  MEM window: 52000000-53ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 2000-2fff
>  MEM window: c0300000-c03fffff
>  PREFETCH window: 50000000-51ffffff
>    ACPI-0201: *** Warning: Device is not power manageable
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Enabling device 0000:06:09.0 (0004 -> 0007)
>GSI 16 sharing vector 0xB1 and IRQ 16
>ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 23 (level, low) -> IRQ 177
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1138880020.176:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20010100000, using 10240k, total 16384k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>GSI 17 sharing vector 0xD1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 209
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: PC Speaker as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>OHC1 OHC2 EHCI  LAN  P2P AUDO MODM 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 168k freed
>Write protecting the kernel read-only data: 338k
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>GSI 18 sharing vector 0xD9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK1032GAX, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
>Probing IDE interface ide1...
>hdc: MATSHITADVD-RAM UJ-845S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (48 C)
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>BUG: soft lockup detected on CPU#0!
>CPU 0:
>Modules linked in: ext3 jbd fan thermal processor atiixp ide_disk ide_core
>Pid: 0, comm: swapper Not tainted 2.6.16-rc1-git3-7-default #1
>RIP: 0010:[<ffffffff88032690>] <ffffffff88032690>{:processor:acpi_processor_idle+435}
>RSP: 0018:ffffffff8041df60  EFLAGS: 00000246
>RAX: ffffffff8041dfd8 RBX: 0000000000000000 RCX: 0000000003faa0e1
>RDX: 0000000000008008 RSI: 000000000692ef86 RDI: 0000000000008104
>RBP: 0000000000008104 R08: 0000001000000000 R09: ffffffff802bd694
>R10: 00000000802bd6ea R11: ffffffff802bd694 R12: 0000000000000000
>R13: ffffffff80206c11 R14: 0000000000000000 R15: ffffffff80206d08
>FS:  00002b736a7e56d0(0000) GS:ffffffff80411000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>CR2: 000000000059bca8 CR3: 000000003f651000 CR4: 00000000000006e0
>
>Call Trace: <ffffffff880324dd>{:processor:acpi_processor_idle+0}
>       <ffffffff880324dd>{:processor:acpi_processor_idle+0}
>       <ffffffff801098bf>{cpu_idle+61} <ffffffff8041e777>{start_kernel+451}
>       <ffffffff8041e259>{_sinittext+601}
>Losing some ticks... checking if CPU frequency changed.
>Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1 across:1052248k
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>GSI 19 sharing vector 0xE1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 225
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 225, io mem 0xc0000000
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:13.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, git-1.1.7
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 225
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 225, io mem 0xc0001000
>ieee1394: Initialized config rom entry `ip1394'
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>rt2x00core: module not supported by Novell, setting U taint flag.
>Loading module: rt2x00core - Beta 3 (18 December 2005) by http://rt2x00.serialmonkey.com
>rt2500pci: module not supported by Novell, setting U taint flag.
>Loading module: rt2500pci - Beta 3 (18 December 2005) by http://rt2x00.serialmonkey.com
>ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 23 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:06:09.0 [1025:007e]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:06:09.0, mfunc 0x01721b22, devctl 0x64
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 225
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 225, io mem 0xc0002000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc1-git3-7-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:13.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
>ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 21 (level, low) -> IRQ 169
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[c0309000-c03097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>tg3.c:v3.48 (Jan 16, 2006)
>    ACPI-0201: *** Warning: Device is not power manageable
>GSI 20 sharing vector 0xE9 and IRQ 20
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:c0:9f:e5:f1:27
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000]
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 169
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>usb 2-1: new device found, idVendor=046d, idProduct=c00c
>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Mouse
>usb 2-1: Manufacturer: Logitech
>usb 2-1: configuration #1 chosen from 1 choice
>usbcore: registered new driver hiddev
>input: Logitech USB Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00007291ac]
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1138880051.186:2): AppArmor (version 2.0-19.43r6152) initialized
>
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>SCSI subsystem initialized
>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>warning: many lost ticks.
>Your time source seems to be instable or some driver is hogging interupts
>rip acpi_processor_idle+0x1b3/0x3ef [processor]
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST
>    ACPI-0339: *** Error: Looking up [Z00I] in namespace, AE_NOT_FOUND
>search_node ffff810037fd5e50 start_node ffff810037fd5e50 return_node 0000000000000000
>    ACPI-0460: *** Warning: [AE_NOT_CONFIGURED]: Could not resolve operands, AE_NOT_FOUND
>    ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node ffff810037fd4610), AE_NOT_FOUND
>    ACPI-0205: *** Warning: Error evaluating _BST

Actions: View

Attachments on bug 145747: 66159