Attachment 66361 Details for Bug 144623

Boot.msg 10.1b3, booting in safe mode

boot.msg (text/plain), 29.40 KB, created by Markus Koßmann on 2006-02-03 14:46:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Markus Koßmann

Created: 2006-02-03 14:46:39 UTC

Size: 29.40 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.16-rc1-git3-7-smp
>Loaded 22159 symbols from /boot/System.map-2.6.16-rc1-git3-7-smp.
>Symbols match kernel version 2.6.16.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.16-rc1-git3-7-smp (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #1 SMP Mon Jan 30 21:52:12 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
><4> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
><4> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
><4> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
><4> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
><5>1151MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000ff780
><7>On node 0 totalpages: 524208
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 294832 pages, LIFO batch:31
><6>DMI 2.3 present.
><6>Using APIC driver default
><7>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fb510
><7>ACPI: XSDT (v001 A M I  OEMXSDT  0x11000517 MSFT 0x00000097) @ 0x7ffb0100
><7>ACPI: FADT (v003 A M I  OEMFACP  0x11000517 MSFT 0x00000097) @ 0x7ffb0290
><7>ACPI: MADT (v001 A M I  OEMAPIC  0x11000517 MSFT 0x00000097) @ 0x7ffb0390
><7>ACPI: MCFG (v001 A M I  OEMMCFG  0x11000517 MSFT 0x00000097) @ 0x7ffb0400
><7>ACPI: OEMB (v001 A M I  AMI_OEM  0x11000517 MSFT 0x00000097) @ 0x7ffbe040
><7>ACPI: DSDT (v001  A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0x508
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><4>Processor #0 15:11 APIC version 16
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><4>Processor #1 15:11 APIC version 16
><6>Overriding APIC driver with bigsmp
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><4>ACPI: BIOS IRQ0 pin2 override ignored.
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><4>Enabling APIC mode:  Physflat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/sdb5 vga=normal ide=nodma apm=off ac
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 2210.275 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 2067512k/2096832k available (1630k kernel code, 27944k reserved, 740k data, 212k init, 1179328k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 4430.60 BogoMIPS (lpj=8861207)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
><7>CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0(2) -> Core 0
><7>CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>mtrr: v2.0 (20020519)
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2517k freed
><4> not found!
><4>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
><4>Leaving ESR disabled.
><6>Enabling SMP...
><4>Booting processor 1/1 eip 3000
><6>Initializing CPU#1
><4>Leaving ESR disabled.
><4>Calibrating delay using timer specific routine.. 4420.43 BogoMIPS (lpj=8840872)
><7>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
><7>CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1(2) -> Core 1
><7>CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000003
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#1.
><4>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
><6>Total of 2 processors activated (8851.03 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
><6>checking TSC synchronization across 2 CPUs: passed.
><6>Enabling SMP...
><6>Brought up 2 CPUs
><4>migration_cost=2000
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
><6>PCI: Using MMCONFIG
><6>ACPI: Subsystem revision 20050902
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><7>Boot video device is 0000:03:00.0
><6>PCI: Transparent bridge - 0000:00:12.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
><4>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
><4>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 18 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:0e: ioport range 0xc00-0xc0f has been reserved
><6>pnp: 00:0e: ioport range 0xd00-0xd0f has been reserved
><6>pnp: 00:0e: ioport range 0xa20-0xa2f has been reserved
><6>pnp: 00:0e: ioport range 0xa30-0xa3f has been reserved
><6>PCI: Bridge: 0000:00:02.0
><6>  IO window: 9000-9fff
><6>  MEM window: fa600000-fa7fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:03.0
><6>  IO window: a000-afff
><6>  MEM window: fa800000-fa8fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:04.0
><6>  IO window: b000-bfff
><6>  MEM window: fa900000-fe9fffff
><6>  PREFETCH window: b7f00000-d7efffff
><6>PCI: Bridge: 0000:00:12.0
><6>  IO window: disabled.
><6>  MEM window: fea00000-feafffff
><6>  PREFETCH window: d7f00000-dfefffff
><6>PCI: Bridge: 0000:00:16.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:17.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><4>    ACPI-0201: *** Warning: Device is not power manageable
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><7>PCI: Setting latency timer of device 0000:00:03.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><7>PCI: Setting latency timer of device 0000:00:04.0 to 64
><7>PCI: Setting latency timer of device 0000:00:12.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><7>PCI: Setting latency timer of device 0000:00:16.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><7>PCI: Setting latency timer of device 0000:00:17.0 to 64
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: disabled on user request.
><6>audit: initializing netlink socket (disabled)
><5>audit(1138975596.552:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><4>pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:02.0:pcie00]
><7>Allocate Port Service[0000:00:02.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:03.0 to 64
><4>pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:03.0:pcie00]
><7>Allocate Port Service[0000:00:03.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:04.0 to 64
><4>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:04.0:pcie00]
><7>Allocate Port Service[0000:00:04.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:16.0 to 64
><4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:16.0:pcie00]
><7>Allocate Port Service[0000:00:16.0:pcie03]
><7>PCI: Setting latency timer of device 0000:00:17.0 to 64
><4>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:17.0:pcie00]
><7>Allocate Port Service[0000:00:17.0:pcie03]
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>FDC 0 is a post-1991 82077
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Starting balanced_irq
><4>Using IPI No-Shortcut mode
><4>ACPI wakeup devices: 
><4>PS2K PS2M UAR1 NSMB USB0 USB2 NMAC PB2P MC97 PCE0 PCE1 PCE2 PCE3 PCE4 PCE5 PWRB 
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Freeing unused kernel memory: 212k freed
><4>Write protecting the kernel read-only data: 294k
><4>logips2pp: Detected unknown logitech mouse model 99
><6>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><6>NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
><4>    ACPI-0201: *** Warning: Device is not power manageable
><6>NFORCE-CK804: chipset revision 243
><6>NFORCE-CK804: not 100% native mode: will probe irqs later
><6>NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
><6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
><6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: PLEXTOR DVDR PX-716AL, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><4>hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><7>libata version 1.20 loaded.
><7>sata_nv 0000:00:10.0: version 0.8
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 225
><7>PCI: Setting latency timer of device 0000:00:10.0 to 64
><6>ata1: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD400 irq 225
><6>ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD408 irq 225
><6>ata1: SATA link up 3.0 Gbps (SStatus 123)
><7>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff
><6>ata1: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48
><4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><6>ata1: dev 0 configured for UDMA/133
><6>scsi0 : sata_nv
><6>ata2: SATA link up 3.0 Gbps (SStatus 123)
><7>ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff
><6>ata2: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48
><4>nv_sata: Primary device added
><6>ata2: dev 0 configured for UDMA/133
><6>scsi1 : sata_nv
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><5>  Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda:<4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><4> sda1 sda2 <<4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><4> sda5<4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><4> sda6 > sda3
><4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><5>sd 0:0:0:0: Attached scsi disk sda
><5>  Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><6> sdb:<4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><4> sdb1 sdb2 sdb3 <<4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><4> sdb5 >
><4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><5>sd 1:0:0:0: Attached scsi disk sdb
><4>nv_sata: Primary device added
><4>nv_sata: Primary device removed
><4>nv_sata: Secondary device added
><4>nv_sata: Secondary device removed
><5>sd 1:0:0:0: Attached scsi generic sg1 type 0
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 233
><7>PCI: Setting latency timer of device 0000:00:11.0 to 64
><6>ata3: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 233
><6>ata4: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 233
><6>ata3: SATA link down (SStatus 0)
><6>scsi2 : sata_nv
><6>ata4: SATA link down (SStatus 0)
><6>scsi3 : sata_nv
><4>sata_sil24: module not supported by Novell, setting U taint flag.
><7>sata_sil24 0000:01:00.0: version 0.23
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
><6>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 50
><7>PCI: Setting latency timer of device 0000:01:00.0 to 64
><6>ata5: SATA max UDMA/100 cmd 0xF8868000 ctl 0x0 bmdma 0x0 irq 50
><6>ata6: SATA max UDMA/100 cmd 0xF886A000 ctl 0x0 bmdma 0x0 irq 50
><6>ata5: SATA link down (SStatus 0)
><6>scsi4 : sata_sil24
><6>ata6: SATA link up 1.5 Gbps (SStatus 113)
><7>ata6: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3e02 87:4023 88:003f
><6>ata6: dev 0 ATA-6, max UDMA/100, 321672960 sectors: LBA48
><6>ata6: dev 0 configured for UDMA/100
><6>scsi5 : sata_sil24
><5>  Vendor: ATA       Model: HDS722516VLSA80   Rev: V34O
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdc: 321672960 512-byte hdwr sectors (164697 MB)
><5>sdc: Write Protect is off
><7>sdc: Mode Sense: 00 3a 00 00
><5>SCSI device sdc: drive cache: write back
><5>SCSI device sdc: 321672960 512-byte hdwr sectors (164697 MB)
><5>sdc: Write Protect is off
><7>sdc: Mode Sense: 00 3a 00 00
><5>SCSI device sdc: drive cache: write back
><6> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
><5>sd 5:0:0:0: Attached scsi disk sdc
><5>sd 5:0:0:0: Attached scsi generic sg2 type 0
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><5>ReiserFS: sdb5: found reiserfs format "3.6" with standard journal
><5>ReiserFS: sdb5: using ordered data mode
><5>ReiserFS: sdb5: journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: sdb5: checking transaction log (sdb5)
><5>ReiserFS: sdb5: Using r5 hash to sort names
><6>Adding 1959888k swap on /dev/sda1.  Priority:-1 extents:1 across:1959888k
><6>Adding 1052216k swap on /dev/sdb1.  Priority:-2 extents:1 across:1052216k
><6>Adding 746980k swap on /dev/sdc5.  Priority:-3 extents:1 across:746980k
><6>parport: PnPBIOS parport detected.
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>lp0: using parport0 (interrupt-driven).
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 58
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><6>ohci_hcd 0000:00:0b.0: OHCI Host Controller
><6>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:0b.0: irq 58, io mem 0xfebfe000
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
><6>Uniform CD-ROM driver Revision: 3.20
><6>hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:0b.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><6>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600
><6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 66
><7>PCI: Setting latency timer of device 0000:00:0b.1 to 64
><6>ehci_hcd 0000:00:0b.1: EHCI Host Controller
><6>ehci_hcd 0000:00:0b.1: debug port 1
><7>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
><6>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:0b.1: irq 66, io mem 0xfebffc00
><6>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:0b.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 10 ports detected
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 225
><7>PCI: Setting latency timer of device 0000:00:13.0 to 64
><6>Linux video capture interface: v1.00
><4>compat_ioctl32: module not supported by Novell, setting U taint flag.
><6>usb 2-4: new high speed USB device using ehci_hcd and address 2
><7>ieee1394: Initialized config rom entry `ip1394'
><6>gameport: NS558 PnP Gameport is pnp00:06/gameport0, io 0x201, speed 817kHz
><4>sky2: module not supported by Novell, setting U taint flag.
><6>usb 2-4: new device found, idVendor=058f, idProduct=6362
><6>usb 2-4: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 2-4: Product: Mass Storage Device
><6>usb 2-4: Manufacturer: Generic
><6>usb 2-4: SerialNumber: 058F312D81B
><6>usb 2-4: configuration #1 chosen from 1 choice
><6>eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0
><6>stradis 0000:04:06.0: 0: SDM2xx found
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
><6>ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 74
><4>videodev: "SAA7146A" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
><1>Unable to handle kernel NULL pointer dereference at virtual address 000000fc
><1> printing eip:
><4>f8c17e07
><1>*pde = 00000000
><0>Oops: 0002 [#1]
><0>SMP 
><0>last sysfs file: /devices/pci0000:00/0000:00:0b.1/usb2/serial
><4>Modules linked in: snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device snd sky2 soundcore ns558 ohci1394 ieee1394 gameport stradis compat_ioctl32 videodev generic forcedeth ehci_hcd ide_cd cdrom shpchp pci_hotplug i2c_nforce2 i2c_core ohci_hcd usbcore parport_pc lp parport reiserfs fan thermal processor sata_sil24 sg sata_nv libata amd74xx sd_mod scsi_mod ide_disk ide_core
><0>CPU:    0
><4>EIP:    0060:[pg0+948121095/1069650944]    Tainted: G     U VLI
><4>EFLAGS: 00010246   (2.6.16-rc1-git3-7-smp) 
><0>EIP is at stradis_probe+0x5ba/0xa31 [stradis]
><0>eax: 00000000   ebx: f8c1d6a0   ecx: 00000000   edx: 00000292
><0>esi: f8c1c1cc   edi: f8c1db00   ebp: f8c1d6a0   esp: f74dbd64
><0>ds: 007b   es: 007b   ss: 0068
><0>Process modprobe (pid: 1668, threadinfo=f74da000 task=c277a550)
><0>Stack: <0>dfed1884 00000000 00000000 00000001 dead4ead ffffffff ffffffff 00000001 
><0>       dead4ead ffffffff ffffffff 00000001 dead4ead ffffffff ffffffff 00000001 
><0>       dead4ead ffffffff ffffffff 00000001 dead4ead ffffffff ffffffff f8c1bfac 
><0>Call Trace:
><0> [__driver_attach+0/143] __driver_attach+0x0/0x8f
><0> [pci_device_probe+54/87] pci_device_probe+0x36/0x57
><0> [driver_probe_device+66/139] driver_probe_device+0x42/0x8b
><0> [__driver_attach+101/143] __driver_attach+0x65/0x8f
><0> [bus_for_each_dev+57/91] bus_for_each_dev+0x39/0x5b
><0> [driver_attach+17/19] driver_attach+0x11/0x13
><0> [__driver_attach+0/143] __driver_attach+0x0/0x8f
><0> [bus_add_driver+100/253] bus_add_driver+0x64/0xfd
><0> [__pci_register_driver+130/164] __pci_register_driver+0x82/0xa4
><0> [pg0+947720218/1069650944] stradis_init+0x1a/0x2f [stradis]
><0> [sys_init_module+5860/6277] sys_init_module+0x16e4/0x1885
><0> [pg0+948072448/1069650944] ohci1394_init+0x0/0xf [ohci1394]
><0> [file_read_actor+0/224] file_read_actor+0x0/0xe0
><0> [generic_file_read+0/172] generic_file_read+0x0/0xac
><0> [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d
><0> [vfs_write+263/326] vfs_write+0x107/0x146
><0> [sys_write+60/99] sys_write+0x3c/0x63
><0> [sysenter_past_esp+84/121] sysenter_past_esp+0x54/0x79
><0>Code: c4 10 e9 8f 04 00 00 8b 04 24 b9 18 01 00 00 8b 98 74 01 00 00 31 c0 89 df f3 ab 8b 83 0c 03 00 00 c7 83 7c 02 00 00 00 00 00 00 <c7> 80 fc 00 00 00 00 00 ff ff b8 b8 ae 47 01 e8 a7 4e 5a c7 8b 
><4> <6>Initializing USB Mass Storage driver...
><6>scsi6 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: waiting for device to settle before scanning
><5>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
><5>  Type:   Direct-Access                      ANSI SCSI revision: 00
><5>sd 6:0:0:0: Attached scsi removable disk sdd
><5>sd 6:0:0:0: Attached scsi generic sg3 type 0
><5>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
><5>  Type:   Direct-Access                      ANSI SCSI revision: 00
><5>sd 6:0:0:1: Attached scsi removable disk sde
><5>sd 6:0:0:1: Attached scsi generic sg4 type 0
><5>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
><5>  Type:   Direct-Access                      ANSI SCSI revision: 00
><5>sd 6:0:0:2: Attached scsi removable disk sdf
><5>sd 6:0:0:2: Attached scsi generic sg5 type 0
><5>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
><5>  Type:   Direct-Access                      ANSI SCSI revision: 00
><5>sd 6:0:0:3: Attached scsi removable disk sdg
><5>sd 6:0:0:3: Attached scsi generic sg6 type 0
><7>usb-storage: device scan complete
><6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
><7>dm-netlink version 0.0.2 loaded
><6>loop: loaded (max 8 devices)
><6>NTFS driver 2.1.25 [Flags: R/W MODULE].
><6>NTFS volume version 3.1.
><6>NTFS volume version 3.1.
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Feb  3 14:06:47 2006
>
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>done<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/bin vga=normal DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb5 _=/sbin/startproc DAEMON=/sbin/udevd ]
>Activating swap-devices in /etc/fstab...
>doneStarting udevd done
>Activating device mapper...
>Creating /dev/mapper/control character device with major:10 minor:63.
>done
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  /dev/sdd: open failed: No medium found
>  /dev/sde: open failed: No medium found
>  /dev/sdf: open failed: No medium found
>  /dev/sdg: open failed: No medium found
>  Found volume group "system" using metadata type lvm2
>Activating LVM volume groups...
>  5 logical volume(s) in volume group "system" now active
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>doneSetting up kernel module dependencies (if required)done
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda3 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
>/dev/sdc1 on /windows/D type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
>/dev/sdc8 on /windows/E type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>doneLoading required kernel modules
>donedone
>Setting up hostname 'linux'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
><notice>killproc: kill(1004,29)
>Creating /var/log/boot.msg
>doneSetting up the hardware clockdone
>Activating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1004,3)
>
>
>Boot logging started on /dev/tty1(/dev/console) at Fri Feb  3 15:10:43 2006
>
>Master Resource Control: previous runlevel: *, switching to runlevel: 6
>Running /etc/init.d/halt.local
>done<notice>killproc: kill(4538,3)
>Sending all processes the TERM signal...

Actions: View

Attachments on bug 144623: 64402 | 64866 | 64867 | 64884 | 66360 | 66361 | 67766 | 69987 | 69988 | 69990 | 69991