Attachment 66684 Details for Bug 148636

boot.msg after a failed boot

boot.msg (text/plain), 24.29 KB, created by Ralf Haferkamp on 2006-02-07 09:48:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ralf Haferkamp

Created: 2006-02-07 09:48:40 UTC

Size: 24.29 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.16-rc1-git3-7-default
>Loaded 21547 symbols from /boot/System.map-2.6.16-rc1-git3-7-default.
>Symbols match kernel version 2.6.16.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.16-rc1-git3-7-default (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #1 Mon Jan 30 21:52:12 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
><4> BIOS-e820: 000000003ffd0000 - 000000003ffefc00 (reserved)
><4> BIOS-e820: 000000003ffefc00 - 000000003fffb000 (ACPI NVS)
><4> BIOS-e820: 000000003fffb000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
><4> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
><4> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
><4> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
><4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><5>127MB HIGHMEM available.
><5>896MB LOWMEM available.
><7>On node 0 totalpages: 262096
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 32720 pages, LIFO batch:7
><6>DMI 2.3 present.
><7>ACPI: RSDP (v000 HP                                    ) @ 0x000fe270
><7>ACPI: RSDT (v001 HP     0934     0x15090520 HP   0x00000001) @ 0x3ffefc84
><7>ACPI: FADT (v002 HP     0934     0x00000002 HP   0x00000001) @ 0x3ffefc00
><7>ACPI: MADT (v001 HP     0934     0x00000001 HP   0x00000001) @ 0x3ffefcb8
><7>ACPI: MCFG (v001 HP     0934     0x00000001 HP   0x00000001) @ 0x3ffefd14
><7>ACPI: SSDT (v001 HP       HPQPpc 0x00001001 MSFT 0x0100000e) @ 0x3fff8220
><7>ACPI: DSDT (v001 HP       nc8200 0x00010000 MSFT 0x0100000e) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0x1008
><6>ACPI: local apic disabled
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda5  splash=silent
><6>bootsplash: silent mode.
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 798.130 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1033436k/1048384k available (1555k kernel code, 14308k reserved, 627k data, 184k init, 130880k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 1600.45 BogoMIPS (lpj=3200907)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
><7>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 2048K
><7>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>mtrr: v2.0 (20020519)
><4>CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2478k freed
><4> not found!
><4>ACPI: setting ELCR to 0200 (from 0c00)
><6>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
><6>PCI: Using MMCONFIG
><6>ACPI: Subsystem revision 20050902
><4>    ACPI-0284: *** Warning: Unknown GPE method type: C278 (name not of form _Lxx or _Exx)
><4>    ACPI-0284: *** Warning: Unknown GPE method type: C1F1 (name not of form _Lxx or _Exx)
><4>    ACPI-0284: *** Warning: Unknown GPE method type: C279 (name not of form _Lxx or _Exx)
><4>    ACPI-0284: *** Warning: Unknown GPE method type: C27A (name not of form _Lxx or _Exx)
><6>ACPI: Interpreter enabled
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [C003] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.C003] bus is 0
><4>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
><4>PCI quirk: region 1100-113f claimed by ICH6 GPIO
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><4>PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C054._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C069._PRT]
><6>ACPI: Power Resource [C1D0] (on)
><4>burst-mode-ec-10-Aug
><6>ACPI: Embedded Controller [C005] (gpe 16)
><6>ACPI: Power Resource [C1B2] (on)
><6>ACPI: Power Resource [C1B9] (on)
><6>ACPI: Power Resource [C1C9] (on)
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0CE._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0DE._PRT]
><4>ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11)
><4>ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11)
><4>ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11)
><4>ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11)
><4>    ACPI-0186: *** Warning: Error evaluating _PRS
><6>ACPI: Power Resource [C250] (off)
><6>ACPI: Power Resource [C251] (off)
><6>ACPI: Power Resource [C252] (off)
><6>ACPI: Power Resource [C253] (off)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 14 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><3>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
><3>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
><3>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:0b: ioport range 0x1000-0x107f could not be reserved
><6>pnp: 00:0b: ioport range 0x1100-0x113f has been reserved
><6>pnp: 00:0b: ioport range 0x1200-0x121f has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 2000-2fff
><6>  MEM window: c8800000-c8bfffff
><6>  PREFETCH window: c0000000-c7ffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: c8000000-c83fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
><4>  IO window: 00004000-000040ff
><4>  IO window: 00004400-000044ff
><4>  PREFETCH window: 50000000-51ffffff
><4>  MEM window: 52000000-53ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 4000-4fff
><6>  MEM window: c8400000-c87fffff
><6>  PREFETCH window: 50000000-51ffffff
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [C0DA] enabled at IRQ 10
><7>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [C0DB] enabled at IRQ 11
><7>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [C0DB] -> GSI 11 (level, low) -> IRQ 11
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [C0DC] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0DC] -> GSI 11 (level, low) -> IRQ 11
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1139299276.012:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>Allocate Port Service[0000:00:1c.0:pcie03]
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [C0DB] -> GSI 11 (level, low) -> IRQ 11
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>Allocate Port Service[0000:00:1c.1:pcie03]
><6>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 6144k, total 131008k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
><6>vesafb: protected mode interface info at c000:5af5
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 80290 bytes,<6>...found (1024x768, 32624 bytes, v3).
><4>Console: switching to colour frame buffer device 93x45
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: PS/2 Controller [PNP0303:C1C6,PNP0f13:C1C7] at 0x60,0x64 irq 1,12
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
><4>    ACPI-0201: *** Warning: Device is not power manageable
><4>ACPI: PCI Interrupt Link [C0F2] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [C0F2] -> GSI 10 (level, low) -> IRQ 10
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI Shortcut mode
><4>ACPI wakeup devices: 
><4>C069 C0CE C1D1 C0DE C1D4 
><6>ACPI: (supports S0 S3 S4 S5)
><6>Freeing unused kernel memory: 184k freed
><4>Write protecting the kernel read-only data: 288k
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
><6>serio: Synaptics pass-through port at isa0060/serio4/input0
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>ICH6: IDE controller at PCI slot 0000:00:1f.1
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10
><6>ICH6: chipset revision 3
><6>ICH6: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x3580-0x3587, BIOS settings: hda:DMA, hdb:DMA
><7>Probing IDE interface ide0...
><4>hda: HTS541080G9AT00, ATA DISK drive
><4>hdb: MATSHITADVD-RAM UJ-832S, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 128KiB
><6>hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100)
><6>hda: cache flushes supported
><6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
><6>ACPI: Processor [C001] (supports 8 throttling states)
><6>ACPI: Thermal Zone [TZ1] (32 C)
><6>ACPI: Thermal Zone [TZ2] (29 C)
><4>    ACPI-0472: *** Warning: Critical trip point
><0>Critical temperature reached (3428 C), shutting down.
><6>ACPI: Thermal Zone [TZ3] (3428 C)
><6>ACPI: Thermal Zone [TZ4] (100 C)
><6>ACPI: Fan [C254] (off)
><6>ACPI: Fan [C255] (off)
><6>ACPI: Fan [C256] (off)
><6>ACPI: Fan [C257] (off)
><4>Attempting manual resume
><5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda2: using ordered data mode
><5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda2: checking transaction log (hda2)
><5>ReiserFS: hda2: Using r5 hash to sort names
><6>Adding 1052216k swap on /dev/hda5.  Priority:-1 extents:1 across:1052216k
><6>parport: PnPBIOS parport detected.
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>lp0: using parport0 (interrupt-driven).
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><4>    ACPI-0201: *** Warning: Device is not power manageable
><6>USB Universal Host Controller Interface driver v2.3
><4>ACPI: PCI Interrupt Link [C0F0] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [C0F0] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xc8c00000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: EHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-default ehci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.7
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0F0] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00003000
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.0
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0DB] -> GSI 11 (level, low) -> IRQ 11
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00003020
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.16-rc1-git3-7-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.1
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0DC] -> GSI 11 (level, low) -> IRQ 11
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00003040
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.16-rc1-git3-7-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.2
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>hdb: ATAPI 20X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA
><6>Uniform CD-ROM driver Revision: 3.20
><6>usb 3-2: new full speed USB device using uhci_hcd and address 2
><6>agpgart: Detected an Intel 915GM Chipset.
><6>agpgart: AGP aperture is 256M @ 0x0
><6>usb 3-2: new device found, idVendor=03f0, idProduct=011d
><6>usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 3-2: Product: HP integrated Bluetooth module
><6>usb 3-2: Manufacturer: Broadcom
><6>usb 3-2: configuration #1 chosen from 1 choice
><3>hw_random: RNG not detected
><6>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
><6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
><4>ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [C0F1] -> GSI 11 (level, low) -> IRQ 11
><7>PCI: Setting latency timer of device 0000:00:1e.2 to 64
><6>intel8x0_measure_ac97_clock: measured 54860 usecs
><6>intel8x0: clocking to 48000
><6>tg3.c:v3.48 (Jan 16, 2006)
><4>    ACPI-0201: *** Warning: Device is not power manageable
><6>ACPI: PCI Interrupt 0000:10:00.0[A] -> Link [C0DA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:10:00.0 to 64
><6>eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:e1:f5:97
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
><6>eth0: dma_rwctrl[76180000]
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0DC] -> GSI 11 (level, low) -> IRQ 11
><6>Yenta: CardBus bridge found at 0000:02:06.0 [103c:0934]
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:02:06.0, mfunc 0x01111b22, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0078, PCI irq 11
><6>Socket status: 30000006
><6>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
><6>cs: IO port probe 0x4000-0x4fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff
><6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
><7>ieee1394: Initialized config rom entry `ip1394'
><6>ACPI: PCI Interrupt 0000:02:06.2[C] -> Link [C0F2] -> GSI 10 (level, low) -> IRQ 10
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[c8402000-c84027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><4>ieee80211_crypt: module not supported by Novell, setting U taint flag.
><7>ieee80211_crypt: registered algorithm 'NULL'
><4>ieee80211: module not supported by Novell, setting U taint flag.
><6>ieee80211: 802.11 data/management/control stack, git-1.1.7
><6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
><4>ipw2200: module not supported by Novell, setting U taint flag.
><6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10
><6>ipw2200: Copyright(c) 2003-2005 Intel Corporation
><4>    ACPI-0201: *** Warning: Device is not power manageable
><6>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0F1] -> GSI 11 (level, low) -> IRQ 11
><6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
><6>Bluetooth: Core ver 2.8
><6>NET: Registered protocol family 31
><6>Bluetooth: HCI device and connection manager initialized
><6>Bluetooth: HCI socket layer initialized
><6>Bluetooth: HCI USB driver ver 2.9
><6>usbcore: registered new driver hci_usb
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: clean.
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[a557394300508b71]
><6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
><7>dm-netlink version 0.0.2 loaded
><6>loop: loaded (max 8 devices)
><5>ReiserFS: hda8: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda8: using ordered data mode
><5>ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda8: checking transaction log (hda8)
><5>ReiserFS: hda8: Using r5 hash to sort names
><5>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda7: using ordered data mode
><5>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda7: checking transaction log (hda7)
><5>ReiserFS: hda7: Using r5 hash to sort names
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Feb  7 09:01:28 2006
>
><notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/sbin:/bin vga=0x317 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 selinux=0 _=/sbin/startproc DAEMON=/sbin/udevd ]
>Configuring serial ports...
>/dev/ttyS2 at 0x03e8 (irq = 4) is a 16550A
>Configured serial ports
>doneActivating swap-devices in /etc/fstab...
>doneStarting udevd done
>Activating device mapper...
>Creating /dev/mapper/control character device with major:10 minor:63.
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>doneSetting up kernel module dependencies (if required)done
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/hda8 on /space type reiserfs (rw)
>/dev/hda7 on /test type reiserfs (rw)
>doneSetting up the hardware clockLoading AppArmor module done
>Mounting securityfs on /sys/kernel/security done
>OWLSM extension not supported by this version of AppArmor. warning
>Loading AppArmor profiles done
>Loading required kernel modules
>done<notice>killproc: kill(902,29)
>Creating /var/log/boot.msg
>done<notice>startproc: execve (/usr/sbin/aa-eventd) [ /usr/sbin/aa-eventd -p /var/run/aa-eventd.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/aa-eventd ]
>done
>Starting AppArmor Event daemon done
>Setting up hostname 'linux'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>done
>
>INIT: Switching to runlevel: 0
>
>
>
>INIT: Sending processes the TERM signal
>
>
><notice>
>Boot logging started on /dev/tty1(/dev/console) at Tue Feb  7 09:01:53 2006
>
>Master Resource Control: previous runlevel: *, switching to runlevel: 0
>Running /etc/init.d/halt.local
>doneSending all processes the TERM signal...
>killproc: kill(2492,3)

Actions: View

Attachments on bug 148636: 66684 | 66929 | 85018