Bugzilla – Attachment 66919 Details for
Bug 144268
NetworkManager: orinoco_cs WEP and WPA2 problems
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
output of NetworkManager --no-daemon
NM.out (text/plain), 22.08 KB, created by
Bart Whiteley
on 2006-02-08 03:57:51 UTC
(
hide
)
Description:
output of NetworkManager --no-daemon
Filename:
MIME Type:
Creator:
Bart Whiteley
Created:
2006-02-08 03:57:51 UTC
Size:
22.08 KB
patch
obsolete
>NetworkManager: <information> starting... >NetworkManager: <information> Adding VPN service 'org.freedesktop.NetworkManager.novellvpn' with name 'novellvpn' and program '/usr/bin/nm-novellvpn-service' >NetworkManager: <information> Adding VPN service 'org.freedesktop.NetworkManager.openvpn' with name 'openvpn' and program '/usr/bin/nm-openvpn-service' >NetworkManager: <information> Adding VPN service 'org.freedesktop.NetworkManager.vpnc' with name 'vpnc' and program '/usr/bin/nm-vpnc-service' >NetworkManager: <information> eth0: Device is fully-supported using driver 'e100'. >NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start >NetworkManager: <information> nm_device_init(): device's worker thread started, continuing. >NetworkManager: <information> Now managing wired Ethernet (802.3) device 'eth0'. >NetworkManager: <information> Deactivating device eth0. >NetworkManager: <information> Stopping ypbind. >NetworkManager: <information> Restarting autofs. >NetworkManager: <debug info> [1139370602.395145] nm_system_device_get_system_config (): found config /etc/sysconfig/network/ifcfg-wlan-id-00:02:2d:69:13:a5 for if eth1 >NetworkManager: <debug info> [1139370602.396292] nm_system_device_get_system_config (): BOOTPROTO=dhcp >NetworkManager: <debug info> [1139370602.397008] nm_system_device_get_system_config (): ------ Config (eth1) >NetworkManager: <debug info> [1139370602.397616] nm_system_device_get_system_config (): dhcp=1 >NetworkManager: <debug info> [1139370602.398226] nm_system_device_get_system_config (): addr=0.0.0.0 >NetworkManager: <debug info> [1139370602.398830] nm_system_device_get_system_config (): gw=0.0.0.0 >NetworkManager: <debug info> [1139370602.399458] nm_system_device_get_system_config (): mask=0.0.0.0 >NetworkManager: <debug info> [1139370602.400020] nm_system_device_get_system_config (): --------------------- > >NetworkManager: <information> eth1: Device is fully-supported using driver 'orinoco_cs'. >NetworkManager: <information> nm_device_init(): waiting for device's worker thread to start >NetworkManager: <information> nm_device_init(): device's worker thread started, continuing. >NetworkManager: <information> Now managing wireless (802.11) device 'eth1'. >NetworkManager: <information> Deactivating device eth1. >NetworkManager: <information> Stopping ypbind. >NetworkManager: <information> Restarting autofs. >NetworkManager: <information> Updating allowed wireless network lists. >NetworkManager: <WARNING> nm_dbus_get_networks_cb (): nm-dbus-nmi.c:527 (nm_dbus_get_networks_cb): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. >NetworkManager: <debug info> [1139370654.693925] nm_device_802_11_wireless_get_activation_ap (): Forcing AP 'testnet' >NetworkManager: <information> User Switch: /org/freedesktop/NetworkManager/Devices/eth1 / testnet >NetworkManager: <information> Deactivating device eth1. >NetworkManager: <information> Stopping ypbind. >NetworkManager: <information> Restarting autofs. >NetworkManager: <information> Device eth1 activation scheduled... >NetworkManager: <information> Activation (eth1) started... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) started... >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) complete. >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) starting... >NetworkManager: <information> Activation (eth1/wireless): access point 'testnet' is encrypted, but NO valid key exists. New key needed. >NetworkManager: <information> Activation (eth1) New wireless user key requested for network 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) complete. >NetworkManager: <information> Activation (eth1) New wireless user key for network 'testnet' received. >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) started... >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) complete. >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) starting... >NetworkManager: <information> Activation (eth1/wireless): access point 'testnet' is encrypted, and a key exists. No new key needed. >NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant ' >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x1 - NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'AP_SCAN 1' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'ADD_NETWORK' >NetworkManager: <information> SUP: response was '0' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 746573746e6574' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) complete. >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 6 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x1 - ioctl[SIOCSIWGENIE]: Operation not supported >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 1 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 2 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 8 value 0x1 - ioctl[SIOCSIWFREQ]: Device or resource busy >ioctl[SIOCSIWAP]: Operation not supported >NetworkManager: <information> Activation (eth1/wireless) Stage 2 (Device Configure) successful. Connected to access point 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) scheduled. >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) started... >NetworkManager: <information> Activation (eth1) Beginning DHCP transaction. >NetworkManager: <information> DHCP daemon state now 12 for interface eth1 >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) complete. >NetworkManager: <information> DHCP daemon state now 1 for interface eth1 >NetworkManager: <information> Device 'eth1' DHCP transaction took too long (>25s), stopping it. >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) scheduled... >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) started... >NetworkManager: <information> DHCP daemon state now 14 for interface eth1 >NetworkManager: <information> DHCP daemon state now 11 for interface eth1 >NetworkManager: <information> DHCP daemon state now 14 for interface eth1 >NetworkManager: <debug info> [1139370697.290560] real_act_stage4_ip_config_timeout (): Activation (eth1/wireless): could not get IP configuration info for 'testnet', asking for new key. >NetworkManager: <information> Activation (eth1) New wireless user key requested for network 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) complete. >NetworkManager: <information> Activation (eth1) New wireless user key for network 'testnet' received. >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) started... >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) complete. >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) starting... >NetworkManager: <information> Activation (eth1/wireless): access point 'testnet' is encrypted, and a key exists. No new key needed. >sendmsg(CTRL_IFACE monitor): No such file or directory >ioctl[SIOCSIWMLME]: Operation not supported >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 4 value 0x0 - NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant ' >Trying to associate with 00:06:25:eb:53:c4 (SSID='testnet' freq=2437 MHz) >Association request to the driver failed >CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >Associated with 00:06:25:eb:53:c4 >CTRL-EVENT-CONNECTED - Connection to 00:06:25:eb:53:c4 completed (auth) >CTRL-EVENT-TERMINATING - signal 15 received >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x1 - NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'AP_SCAN 1' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'ADD_NETWORK' >NetworkManager: <information> SUP: response was '0' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 746573746e6574' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) complete. >NetworkManager: <information> Activation (eth1/wireless) Stage 2 (Device Configure) successful. Connected to access point 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) scheduled. >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) started... >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 6 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x1 - ioctl[SIOCSIWGENIE]: Operation not supported >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 1 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 2 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 8 value 0x1 - ioctl[SIOCSIWFREQ]: Device or resource busy >ioctl[SIOCSIWAP]: Operation not supported >NetworkManager: <information> Activation (eth1) Beginning DHCP transaction. >NetworkManager: <information> DHCP daemon state now 12 for interface eth1 >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) complete. >NetworkManager: <information> DHCP daemon state now 1 for interface eth1 >NetworkManager: <information> Device 'eth1' DHCP transaction took too long (>25s), stopping it. >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) scheduled... >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) started... >NetworkManager: <information> DHCP daemon state now 14 for interface eth1 >NetworkManager: <information> DHCP daemon state now 11 for interface eth1 >NetworkManager: <information> DHCP daemon state now 14 for interface eth1 >NetworkManager: <debug info> [1139370740.072694] real_act_stage4_ip_config_timeout (): Activation (eth1/wireless): could not get IP configuration info for 'testnet', asking for new key. >NetworkManager: <information> Activation (eth1) New wireless user key requested for network 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) complete. >NetworkManager: <information> Activation (eth1) New wireless user key for network 'testnet' received. >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) started... >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) complete. >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) starting... >NetworkManager: <information> Activation (eth1/wireless): access point 'testnet' is encrypted, and a key exists. No new key needed. >sendmsg(CTRL_IFACE monitor): No such file or directory >ioctl[SIOCSIWMLME]: Operation not supported >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 4 value 0x0 - NetworkManager: <information> SUP: sending command 'INTERFACE_ADD eth1 wext /var/run/wpa_supplicant ' >Associated with 00:06:25:eb:53:c4 >CTRL-EVENT-CONNECTED - Connection to 00:06:25:eb:53:c4 completed (auth) >Trying to associate with 00:06:25:eb:53:c4 (SSID='testnet' freq=2437 MHz) >Association request to the driver failed >CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >Associated with 00:06:25:eb:53:c4 >CTRL-EVENT-CONNECTED - Connection to 00:06:25:eb:53:c4 completed (reauth) >CTRL-EVENT-TERMINATING - signal 15 received >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x1 - NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'AP_SCAN 1' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'ADD_NETWORK' >NetworkManager: <information> SUP: response was '0' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 ssid 746573746e6574' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 key_mgmt NONE' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_key0 <key>' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'SET_NETWORK 0 wep_tx_keyidx 0' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> SUP: sending command 'ENABLE_NETWORK 0' >NetworkManager: <information> SUP: response was 'OK' >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) complete. >NetworkManager: <information> Activation (eth1/wireless) Stage 2 (Device Configure) successful. Connected to access point 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) scheduled. >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) started... >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 6 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x1 - ioctl[SIOCSIWGENIE]: Operation not supported >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 0 value 0x1 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 1 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 2 value 0x10 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 3 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 10 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 8 value 0x1 - ioctl[SIOCSIWFREQ]: Device or resource busy >ioctl[SIOCSIWAP]: Operation not supported >NetworkManager: <information> Activation (eth1) Beginning DHCP transaction. >NetworkManager: <information> DHCP daemon state now 12 for interface eth1 >NetworkManager: <information> Activation (eth1) Stage 3 (IP Configure Start) complete. >NetworkManager: <information> DHCP daemon state now 1 for interface eth1 >NetworkManager: <information> Device 'eth1' DHCP transaction took too long (>25s), stopping it. >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) scheduled... >NetworkManager: <information> DHCP daemon state now 14 for interface eth1 >NetworkManager: <information> DHCP daemon state now 11 for interface eth1 >NetworkManager: <information> DHCP daemon state now 14 for interface eth1 >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) started... >NetworkManager: <debug info> [1139370778.257632] real_act_stage4_ip_config_timeout (): Activation (eth1/wireless): could not get IP configuration info for 'testnet', asking for new key. >NetworkManager: <information> Activation (eth1) New wireless user key requested for network 'testnet'. >NetworkManager: <information> Activation (eth1) Stage 4 (IP Configure Timeout) complete. >NetworkManager: <information> Activation (eth1) New wireless user key for network 'testnet' received. >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) started... >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) scheduled... >NetworkManager: <information> Activation (eth1) Stage 1 (Device Prepare) complete. >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) starting... >ioctl[SIOCSIWMLME]: Operation not supported >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWENCODEEXT]: Operation not supported >ioctl[SIOCSIWENCODE]: Invalid argument >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. >ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported >WEXT auth param 4 value 0x0 - NetworkManager: <information> Activation (eth1/wireless): access point 'testnet' is encrypted, and a key exists. No new key needed. >Associated with 00:06:25:eb:53:c4 >CTRL-EVENT-CONNECTED - Connection to 00:06:25:eb:53:c4 completed (auth) >Trying to associate with 00:06:25:eb:53:c4 (SSID='testnet' freq=2437 MHz) >Association request to the driver failed >CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >Associated with 00:06:25:eb:53:c4 >CTRL-EVENT-CONNECTED - Connection to 00:06:25:eb:53:c4 completed (reauth) >CTRL-EVENT-TERMINATING - signal 15 received >NetworkManager: <WARNING> real_act_stage2_config (): Activation (eth1/wireless): couldn't connect to the supplicant. >NetworkManager: <information> Activation (eth1) failure scheduled... >NetworkManager: <information> Activation (eth1) Stage 2 (Device Configure) complete. >NetworkManager: <information> Activation (eth1) failed for access point (testnet) >NetworkManager: <information> Activation (eth1) failed. >NetworkManager: <information> Deactivating device eth1. >NetworkManager: <information> Stopping ypbind. >NetworkManager: <information> Restarting autofs.
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 144268
:
64101
| 66919