Attachment 67179 Details for Bug 148094

dmesg

output of dmesg (text/plain), 19.76 KB, created by k. t. on 2006-02-09 11:07:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: k. t.

Created: 2006-02-09 11:07:59 UTC

Size: 19.76 KB

patch

obsolete

> 
>kbeta@kohvi:~> dmesg
>Linux version 2.6.16-rc1-git3-7-default (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #1 Thu Feb 9 01:45:03 EET 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffdf000 (usable)
> BIOS-e820: 000000001ffe0000 - 000000001fffffc0 (ACPI data)
> BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>On node 0 totalpages: 131039
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 126943 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.3 present.
>ACPI: RSDP (v000 INSYDE                                ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1fffaccb
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1ffffa80
>ACPI: MADT (v001 STUPID MAPIC_00 0x30307830 ABCD 0x00010200) @ 0x1ffffb10
>ACPI: HPET (v001 INSYDE HPET_000 0x30303030 0000 0x30303030) @ 0x1ffffb80
>ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1ffffbc0
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1fffaedf
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1fffad07
>ACPI: DSDT (v001 INSYDE SONOMA   0x00000001 INTL 0x02002036) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>ACPI: HPET id: 0x8086a201 base: 0x0
>Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda4 vga=0x314 selinux=0  resume=/dev/sda1 splash=0 irqpoll
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1729.214 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 513328k/524156k available (1555k kernel code, 10192k reserved, 627k data, 184k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3472.80 BogoMIPS (lpj=6945600)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2500k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0ca8)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xea344, last bus=2
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1300-133f claimed by ICH6 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>burst-mode-ec-10-Aug
>ACPI: Embedded Controller [EC0] (gpe 23)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 8 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: c0000000-cfffffff
>  PREFETCH window: 90000000-9fffffff
>PCI: Bus 3, cardbus bridge: 0000:02:02.0
>  IO window: 0000a400-0000a4ff
>  IO window: 0000a800-0000a8ff
>  PREFETCH window: 80000000-81ffffff
>  MEM window: b2000000-b3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-bfff
>  MEM window: b0000000-bfffffff
>  PREFETCH window: 80000000-8fffffff
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1139482950.948:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>vesafb: framebuffer at 0x90000000, mapped to 0xe0880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: protected mode interface info at c000:cfb0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 79463 bytes,<6>...found (800x600, 19227 bytes, v3).
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>TCP bind hash table entries: 32768 (order: 7, 655360 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices:
>SBTN AZAL USB1 USB2 USB3 USB7 LANC MODM
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 288k
>SCSI subsystem initialized
>libata version 1.20 loaded.
>ahci 0000:00:1f.2: version 1.2
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix 0000:00:1f.2: version 1.05
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
>synaptics: Toshiba                  detected, limiting rate to 40pps.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6003 85:3c68 86:3c01 87:6003 88:203f
>ata1: dev 0 ATA-7, max UDMA/100, 78242976 sectors: LBA48
>ata1(0): applying bridge limits
>ata1: dev 0 configured for UDMA/100
>scsi0 : ata_piix
>  Vendor: ATA       Model: SAMSUNG MP0402H   Rev: UC10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: MATSHITA  Model: UJ-840D           Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 05
> 1:0:0:0: Attached scsi generic sg1 type 5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>    ACPI-0507: *** Warning: Error getting cpuindex for acpiid 0x1
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Attempting manual resume
>ReiserFS: sda4: found reiserfs format "3.6" with standard journal
>ReiserFS: sda4: using ordered data mode
>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda4: checking transaction log (sda4)
>ReiserFS: sda4: Using r5 hash to sort names
>Adding 409616k swap on /dev/sda1.  Priority:-1 extents:1 across:409616k
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>    ACPI-0201: *** Warning: Device is not power manageable
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0x30000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>Linux agpgart interface v0.101 (c) Dave Jones
>hw_random: RNG not detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001200
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 7, io base 0x00001220
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc1-git3-7-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001240
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16-rc1-git3-7-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>8139too Fast Ethernet driver 0.9.27
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.7
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10
>ipw2200: Copyright(c) 2003-2005 Intel Corporation
>intel8x0_measure_ac97_clock: measured 56987 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
>Yenta: CardBus bridge found at 0000:02:02.0 [1071:8054]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:02.0, mfunc 0x010c1202, devctl 0x44
>Yenta: ISA IRQ mask 0x0050, PCI irq 3
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
>cs: IO port probe 0xa000-0xbfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xbfffffff
>pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8fffffff
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>eth0: RealTek RTL8139 at 0xe0e0c000, 00:40:d0:76:49:a3, IRQ 5
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: ipw-2.4-boot.fw load failed: Reason -2
>ipw2200: Unable to load firmware: -2
>ipw2200: failed to register network device
>ipw2200: probe of 0000:02:05.0 failed with error -5
>loop: loaded (max 8 devices)
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040d001002d9e36]
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1139482967.725:2): AppArmor (version 2.0-19.43r6152) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4094 buckets, 32752 max) - 232 bytes per conntrack
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 17
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>IA-32 Microcode Update Driver v1.14 unregistered
>xfrm_lookup: IPv4 route is stale (obsolete=4294967295, loops=0)
> [<c0279deb>] xfrm_lookup+0x403/0x481
> [<e0fdd78b>] ipv6_dev_get_saddr+0x4ff/0x585 [ipv6]
> [<e0fd956a>] ip6_dst_lookup+0x1e7/0x250 [ipv6]
> [<e0ff59a8>] ip6_datagram_connect+0x2e5/0x418 [ipv6]
> [<c022d6d5>] release_sock+0x10/0x9b
> [<c026cb37>] inet_dgram_connect+0x45/0x4e
> [<c022cbf2>] sys_connect+0x76/0x98
> [<c014db91>] fd_install+0x24/0x50
> [<c014bcce>] cache_alloc_debugcheck_after+0xb8/0xea
> [<c014cc36>] __kmalloc+0xa8/0xb1
> [<c01343c4>] audit_socketcall+0x37/0x79
> [<c022cd2f>] sys_socketcall+0x8c/0x19e
> [<c0102a99>] syscall_call+0x7/0xb
>powernow: This module only works with AMD K7 CPUs
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=85.196.211.221 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
>eth0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=85.196.211.221 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:40:d0:76:49:a3:00:03:6c:03:50:a8:08:00 SRC=172.188.166.10 DST=85.196.211.221 LEN=90 TOS=0x00 PREC=0x00 TTL=117 ID=64400 PROTO=UDP SPT=13188 DPT=19162 LEN=70
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:40:d0:76:49:a3:00:03:6c:03:50:a8:08:00 SRC=195.199.152.234 DST=85.196.211.221 LEN=90 TOS=0x00 PREC=0x00 TTL=110 ID=3491 PROTO=UDP SPT=23130 DPT=19162 LEN=70
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=85.196.211.221 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:40:d0:76:49:a3:00:03:6c:03:50:a8:08:00 SRC=222.134.45.53 DST=85.196.211.221 LEN=485 TOS=0x00 PREC=0x00 TTL=40 ID=0 DF PROTO=UDP SPT=49751 DPT=1027 LEN=465
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=85.196.211.221 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88

Actions: View

Attachments on bug 148094: 66413 | 66493 | 66935 | 67029 | 67179