Attachment 67676 Details for Bug 149968

dmesg.out.non_working

dmesg.out.non_working (text/plain), 28.03 KB, created by Stefan Dirsch on 2006-02-10 17:28:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Dirsch

Created: 2006-02-10 17:28:16 UTC

Size: 28.03 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda9 vga=0x317 selinux=0    resume=/dev/sda1  splash=silent)
>Linux version 2.6.16-rc1-git3-7-smp (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #1 SMP Mon Jan 30 21:52:12 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fe5f000 (usable)
> BIOS-e820: 000000003fe5f000 - 000000003febf000 (ACPI NVS)
> BIOS-e820: 000000003febf000 - 000000003feed000 (usable)
> BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data)
> BIOS-e820: 000000003feff000 - 000000003ff00000 (usable)
>ACPI: RSDP (v000 INTEL                                 ) @ 0x00000000000fe020
>ACPI: RSDT (v001 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefde48
>ACPI: FADT (v001 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefcf10
>ACPI: MADT (v001 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefce10
>ACPI: WDDT (v001 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x000000003fef7f90
>ACPI: MCFG (v001 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x000000003fef7f10
>ACPI: ASF! (v032 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefcd10
>ACPI: SSDT (v001 INTEL     CpuPm 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefdc10
>ACPI: SSDT (v001 INTEL   Cpu0Ist 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefda10
>ACPI: SSDT (v001 INTEL   Cpu1Ist 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefd810
>ACPI: SSDT (v001 INTEL   Cpu2Ist 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefd610
>ACPI: SSDT (v001 INTEL   Cpu3Ist 0x00000bb0 MSFT 0x01000013) @ 0x000000003fefd410
>ACPI: TCPA (v001 INTEL  TIANO    0x00000002 MSFT 0x01000013) @ 0x000000003fe5f010
>ACPI: DSDT (v001 INTEL  D910GLDW 0x00000bb0 MSFT 0x01000013) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff00000
>Bootmem setup node 0 0000000000000000-000000003ff00000
>On node 0 totalpages: 256663
>  DMA zone: 3013 pages, LIFO batch:0
>  DMA32 zone: 253650 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000)
>Checking aperture...
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>Built 1 zonelists
>Kernel command line: root=/dev/sda9 vga=0x317 selinux=0    resume=/dev/sda1  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2994.534 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>PCI-DMA: Disabling IOMMU.
>Memory: 1016100k/1047552k available (1884k kernel code, 30608k reserved, 880k data, 184k init)
>Calibrating delay using timer specific routine.. 5998.64 BogoMIPS (lpj=11997295)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>Freeing initrd memory: 2666k freed
> not found!
>Using local APIC timer interrupts.
>Detected 12.477 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5989.22 BogoMIPS (lpj=11978456)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 3.00GHz stepping 04
>APIC error on CPU1: 00(40)
>Brought up 2 CPUs
>time.c: Using PIT/TSC based timekeeping.
>testing NMI watchdog ... OK.
>migration_cost=431
>DMI 2.3 present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at f0000000
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: 50200000-502fffff
>  PREFETCH window: 40000000-4fffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: 50100000-501fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 50400000-504fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: 50500000-505fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: 50600000-506fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: 50700000-507fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: 50800000-508fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 50000000-500fffff
>  PREFETCH window: disabled.
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1139555866.068:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>vesafb: framebuffer at 0x40000000, mapped to 0xffffc20010100000, using 6144k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 80290 bytes,<6>...found (1024x768, 32624 bytes, v3).
>Console: switching to colour frame buffer device 93x45
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt 0000:02:00.3[C] -> GSI 18 (level, low) -> IRQ 185
>0000:02:00.3: ttyS2 at I/O 0x2030 (irq = 185) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>SLPB  P32 UAR1 UAR2 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 UHC1 UHC2 UHC3 UHC4 EHCI AC9M AZAL 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 345k
>logips2pp: Detected unknown logitech mouse model 1
>input: PS/2 Logitech Mouse as /class/input/input2
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x40b0-0x40b7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>ide0: Wait for ready failed before probe !
>libata version 1.20 loaded.
>ata_piix 0000:00:1f.2: version 1.05
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x40C8 ctl 0x40E6 bmdma 0x40A0 irq 193
>ata2: SATA max UDMA/133 cmd 0x40C0 ctl 0x40E2 bmdma 0x40A8 irq 193
>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
>ata1: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ata_piix
>ATA: abnormal status 0x7F on port 0x40C7
>ata2: disabling port
>scsi1 : ata_piix
>  Vendor: ATA       Model: ST3120026AS       Rev: 3.00
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>    ACPI-0717: *** Warning: Processor Device is not present
>    ACPI-0507: *** Warning: Error getting cpuindex for acpiid 0x3
>    ACPI-0717: *** Warning: Processor Device is not present
>    ACPI-0507: *** Warning: Error getting cpuindex for acpiid 0x4
>ReiserFS: sda9: found reiserfs format "3.6" with standard journal
>ReiserFS: sda9: using ordered data mode
>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda9: checking transaction log (sda9)
>ReiserFS: sda9: Using r5 hash to sort names
>Adding 1052216k swap on /dev/sda1.  Priority:-1 extents:1 across:1052216k
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random: RNG not detected
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Losing some ticks... checking if CPU frequency changed.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>GSI 20 sharing vector 0x4A and IRQ 20
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 74, io base 0x00004080
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-smp uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 193, io base 0x00004060
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-smp uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 185, io base 0x00004040
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc1-git3-7-smp uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00004020
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16-rc1-git3-7-smp uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
>    ACPI-0201: *** Warning: Device is not power manageable
>GSI 21 sharing vector 0x52 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Floppy drive(s): fd0 is 1.44M
>Intel(R) PRO/1000 Network Driver - version 7.0.28-NAPI
>Copyright (c) 1999-2005 Intel Corporation.
>FDC 0 is a post-1991 82077
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: new device found, idVendor=0a81, idProduct=0103
>usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: USB Keyboard
>usb 3-2: Manufacturer: CHESEN
>usb 3-2: configuration #1 chosen from 1 choice
>usbcore: registered new driver hiddev
>input: CHESEN USB Keyboard as /class/input/input3
>input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.2-2
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>input: CHESEN USB Keyboard as /class/input/input4
>input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:1d.2-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 74, io mem 0x50304400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 3-2: USB disconnect, address 2
>ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 22 (level, low) -> IRQ 82
>tulip0:  EEPROM default media type Autosense.
>tulip0:  Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
>tulip0:  MII transceiver #0 config 1000 status 782d advertising 01e1.
>eth0: Digital DS21140 Tulip rev 34 at 0000000000011000, 00:40:05:A1:8B:DC, IRQ 82.
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>e1000: 0000:02:00.0: e1000_probe: The EEPROM Checksum Is Not Valid
>e1000: probe of 0000:02:00.0 failed with error -5
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>usb 3-2: new device found, idVendor=0a81, idProduct=0103
>usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: USB Keyboard
>usb 3-2: Manufacturer: CHESEN
>usb 3-2: configuration #1 chosen from 1 choice
>input: CHESEN USB Keyboard as /class/input/input5
>input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.2-2
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>input: CHESEN USB Keyboard as /class/input/input6
>input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:1d.2-2
>dm-netlink version 0.0.2 loaded
>loop: loaded (max 8 devices)
>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
>ReiserFS: sda8: using ordered data mode
>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda8: checking transaction log (sda8)
>ReiserFS: sda8: Using r5 hash to sort names
>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1139555914.095:2): AppArmor (version 2.0-19.43r6152) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>x_tables: module not supported by Novell, setting U taint flag.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4092 buckets, 32736 max) - 296 bytes per conntrack
>xt_state: module not supported by Novell, setting U taint flag.
>xt_tcpudp: module not supported by Novell, setting U taint flag.
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 17
>[drm] Initialized drm 1.0.1 20051102
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU1 updated from revision 0x4 to 0x6, date = 04212005 
>microcode: CPU0 updated from revision 0x4 to 0x6, date = 04212005 
>eth0: Setting full-duplex based on MII#0 link partner capability of 05e1.
>IA-32 Microcode Update Driver v1.14 unregistered
>xfrm_lookup: IPv4 route is stale (obsolete=4294967295, loops=0)
>
>Call Trace: <ffffffff802c8014>{xfrm_lookup+1180} <ffffffff882c8b42>{:ipv6:ip6_dst_lookup+484}
>       <ffffffff882e8ffc>{:ipv6:ip6_datagram_connect+799} <ffffffff8026fde3>{lock_sock+197}
>       <ffffffff8026fc7e>{release_sock+25} <ffffffff8026f09f>{sys_connect+118}
>       <ffffffff8010e066>{syscall_trace_enter+190} <ffffffff8010ab34>{tracesys+209}
>xt_limit: module not supported by Novell, setting U taint flag.
>xt_pkttype: module not supported by Novell, setting U taint flag.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:02:a5:5e:4e:bd:08:00 SRC=10.10.101.77 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:69:14:01:03:08:00 SRC=10.10.2.245 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0f:b0:5e:75:38:08:00 SRC=10.10.100.229 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.2.244 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:69:14:01:03:08:00 SRC=10.10.2.245 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.2.244 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:02:a5:5e:4e:bd:08:00 SRC=10.10.101.77 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:02:a5:5e:4e:bd:08:00 SRC=10.10.101.77 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:30:05:6b:5b:5d:08:00 SRC=10.10.2.151 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=31995 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.2.244 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:02:a5:5e:4e:bd:08:00 SRC=10.10.101.77 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:02:a5:5e:4e:bd:08:00 SRC=10.10.101.77 DST=224.0.0.251 LEN=110 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=90 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:40:05:a1:8b:dc:00:a0:c9:8d:cf:51:08:00 SRC=10.10.0.79 DST=10.10.100.120 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=29734 DF PROTO=TCP SPT=33492 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A01B715FE0000000001030302) 
>xfrm_lookup: IPv4 route is stale (obsolete=4294967295, loops=0)
>
>Call Trace: <ffffffff802c8014>{xfrm_lookup+1180} <ffffffff882c8b42>{:ipv6:ip6_dst_lookup+484}
>       <ffffffff882e8ffc>{:ipv6:ip6_datagram_connect+799} <ffffffff8026fde3>{lock_sock+197}
>       <ffffffff8026fc7e>{release_sock+25} <ffffffff8026f09f>{sys_connect+118}
>       <ffffffff8010e066>{syscall_trace_enter+190} <ffffffff8010ab34>{tracesys+209}
>xfrm_lookup: IPv4 route is stale (obsolete=4294967295, loops=0)
>
>Call Trace: <ffffffff802c8014>{xfrm_lookup+1180} <ffffffff882c8b42>{:ipv6:ip6_dst_lookup+484}
>       <ffffffff882e8ffc>{:ipv6:ip6_datagram_connect+799} <ffffffff8026fde3>{lock_sock+197}
>       <ffffffff8026fc7e>{release_sock+25} <ffffffff8026f09f>{sys_connect+118}
>       <ffffffff8010e066>{syscall_trace_enter+190} <ffffffff8010ab34>{tracesys+209}
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0c:6e:da:59:67:08:00 SRC=10.10.103.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87

Actions: View

Attachments on bug 149968: 67652 | 67653 | 67676 | 67679