Attachment 67766 Details for Bug 144623

boot.msg with kotd kernel-debug-2.6.16_rc2_git8-20060210184420.i586

boot.msg (text/plain), 33.10 KB, created by michel munnix on 2006-02-11 14:22:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: michel munnix

Created: 2006-02-11 14:22:27 UTC

Size: 33.10 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.16-rc2-git8-20060210184420-debug
>Loaded 23605 symbols from /boot/System.map-2.6.16-rc2-git8-20060210184420-debug.
>Symbols match kernel version 2.6.16.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.16-rc2-git8-20060210184420-debug (geeko@buildhost) (gcc version 4.1.0 20060201 (prerelease) (SUSE Linux)) #1 SMP Fri Feb 10 18:44:20 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
><4> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
><4> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
><5>127MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>No mptable found.
><7>On node 0 totalpages: 262128
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 32752 pages, LIFO batch:7
><6>DMI 2.2 present.
><6>Using APIC driver default
><7>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75f0
><7>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
><7>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
><7>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff74c0
><7>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0x4008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><4>Processor #0 6:10 APIC version 16
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>Overriding APIC driver with bigsmp
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><4>ACPI: BIOS IRQ0 pin2 override ignored.
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><4>Enabling APIC mode:  Physflat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/hda10 vga=0x317 selinux=0     splash=silent
><6>bootsplash: silent mode.
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 1837.613 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1026280k/1048512k available (1817k kernel code, 21472k reserved, 1184k data, 228k init, 131008k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 3682.44 BogoMIPS (lpj=7364897)
><4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2500k freed
><4> not found!
><4> tbxface-0109 [02] load_tables           : ACPI Tables successfully acquired
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0005) - 701 Objects with 75 Devices 260 Methods 27 Regions
><4>ACPI Namespace successfully loaded at root c048f2f0
><4>evxfevnt-0091 [03] enable                : Transition to ACPI mode successful
><4>CPU0: AMD Athlon(tm) XP 2500+ stepping 00
><4>Leaving ESR disabled.
><6>Total of 1 processors activated (3682.44 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
><6>Brought up 1 CPUs
><4>migration_cost=0
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=3
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20060127
><4>evgpeblk-0941 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-0941 [06] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
><4>evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block
><4>evgpeblk-1037 [05] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:........................................................................
><4>Initialized 27/27 Regions 1/1 Fields 28/28 Buffers 16/24 Packages (710 nodes)
><4>Executing all Device _STA and_INI methods:..............................................................................
><4>78 Devices found - executed 1 _STA, 1 _INI methods
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI: nForce2 C1 Halt Disconnect fixup
><7>Boot video device is 0000:03:00.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
><4>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
><4>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
><4>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
><4>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
><4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
><4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
><4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 17 devices
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
><6>pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
><6>pnp: 00:00: ioport range 0x4400-0x447f has been reserved
><6>pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
><6>pnp: 00:00: ioport range 0x4200-0x427f has been reserved
><6>pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
><6>pnp: 00:01: ioport range 0x5000-0x503f has been reserved
><6>pnp: 00:01: ioport range 0x5500-0x553f has been reserved
><6>PCI: Bridge: 0000:00:08.0
><6>  IO window: 9000-9fff
><6>  MEM window: e4000000-e5ffffff
><6>  PREFETCH window: 50000000-500fffff
><6>PCI: Bridge: 0000:00:0c.0
><6>  IO window: a000-afff
><6>  MEM window: e0000000-e1ffffff
><6>  PREFETCH window: 50100000-501fffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: disabled.
><6>  MEM window: e2000000-e3ffffff
><6>  PREFETCH window: d8000000-dfffffff
><7>PCI: Setting latency timer of device 0000:00:08.0 to 64
><7>PCI: Setting latency timer of device 0000:00:0c.0 to 64
><6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1139666205.600:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 6144k, total 131072k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
><6>vesafb: protected mode interface info at c000:ea60
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 80290 bytes,<6>...found (1024x768, 32624 bytes, v3).
><4>Console: switching to colour frame buffer device 93x45
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><4>logips2pp: Detected unknown logitech mouse model 1
><6>input: PS/2 Logitech Mouse as /class/input/input1
><6>input: PC Speaker as /class/input/input2
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><4>ACPI wakeup devices: 
><4>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 
><6>ACPI: (supports S0 S1 S4 S5)
><6>Freeing unused kernel memory: 228k freed
><4>Write protecting the kernel read-only data: 389k
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>NFORCE2: IDE controller at PCI slot 0000:00:09.0
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><6>NFORCE2: chipset revision 162
><6>NFORCE2: not 100% native mode: will probe irqs later
><4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
><6>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
><6>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
><6>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
><7>Probing IDE interface ide0...
><4>hda: SAMSUNG SP2514N, ATA DISK drive
><4>hdb: SAMSUNG SP1604N, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 512KiB
><6>hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
><6>hda: cache flushes supported
><6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
><6>hdb: max request size: 512KiB
><6>hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
><6>hdb: cache flushes supported
><6> hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 >
><7>Probing IDE interface ide1...
><4>hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
><4>hdd: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><5>ReiserFS: hda10: found reiserfs format "3.6" with standard journal
><4>ReiserFS: hda10: warning: CONFIG_REISERFS_CHECK is set ON
><4>ReiserFS: hda10: warning: - it is slow mode for debugging.
><5>ReiserFS: hda10: using ordered data mode
><5>ReiserFS: hda10: journal params: device hda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda10: checking transaction log (hda10)
><7>ReiserFS: hda10: journal-1153: found in header: first_unflushed_offset 2187, last_flushed_trans_id 145077
><7>ReiserFS: hda10: journal-1206: Starting replay from offset 623105265371275, trans_id 3757021628
><7>ReiserFS: hda10: journal-1299: Setting newest_mount_id to 67
><5>ReiserFS: hda10: Using r5 hash to sort names
><6>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
><6>agpgart: Detected NVIDIA nForce2 chipset
><6>agpgart: AGP aperture is 128M @ 0xd0000000
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><4>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:02.0: irq 185, io mem 0xe6087000
><5>SCSI subsystem initialized
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16-rc2-git8-20060210184420-debug ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 3 ports detected
><7>libata version 1.20 loaded.
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><4>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193
><7>PCI: Setting latency timer of device 0000:00:02.1 to 64
><6>ohci_hcd 0000:00:02.1: OHCI Host Controller
><6>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:02.1: irq 193, io mem 0xe6082000
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: OHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.16-rc2-git8-20060210184420-debug ohci_hcd
><6>usb usb2: SerialNumber: 0000:00:02.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 3 ports detected
><6>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
><6>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><4>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 20 (level, high) -> IRQ 201
><7>PCI: Setting latency timer of device 0000:00:04.0 to 64
><6>eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
><4>ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 22 (level, high) -> IRQ 185
><4>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
><6>0000:02:01.0: 3Com PCI 3c920 Tornado at f9076000. Vers LK1.1.19
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><4>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 193
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><7>ieee1394: Initialized config rom entry `ip1394'
><6>intel8x0_measure_ac97_clock: measured 60582 usecs
><6>intel8x0: clocking to 48000
><4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
><6>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 209
><6>gameport: NS558 PnP Gameport is pnp00:10/gameport0, io 0x201, speed 701kHz
><6>Linux video capture interface: v1.00
><6>parport: PnPBIOS parport detected.
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
><4>        <Adaptec 2940 SCSI adapter>
><4>        aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
><4>
><5>  Vendor: YAMAHA    Model: CRW8824S          Rev: 1.0a
><5>  Type:   CD-ROM                             ANSI SCSI revision: 02
><6> target0:0:3: Beginning Domain Validation
><6> target0:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
><6> target0:0:3: Domain Validation skipping write tests
><6> target0:0:3: Ending Domain Validation
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><4>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 201
><7>PCI: Setting latency timer of device 0000:00:02.2 to 64
><6>ehci_hcd 0000:00:02.2: EHCI Host Controller
><6>ehci_hcd 0000:00:02.2: debug port 1
><7>PCI: cache line size of 64 is not supported by device 0000:00:02.2
><6>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:02.2: irq 201, io mem 0xe6083000
><6>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.16-rc2-git8-20060210184420-debug ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:02.2
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 6 ports detected
><4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
><4>ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 22 (level, high) -> IRQ 185
><7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[e6084000-e60847ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><6>stradis 0000:01:09.0: 0: SDM2xx found
><4>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
><6>ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 217
><4>videodev: "SAA7146A" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
><6>usb 3-1: new high speed USB device using ehci_hcd and address 2
><4>stradis0: config = 00 03 13 c2 26 0f ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>usb 3-1: new device found, idVendor=0424, idProduct=20fc
><6>usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 3-1: Product: USB 2 Flash Media Device
><6>usb 3-1: Manufacturer: Generic
><6>usb 3-1: SerialNumber: 040730700021
><6>usb 3-1: configuration #1 chosen from 1 choice
><4>saa7146: register extension 'dvb'.
><4>sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
><7>sr 0:0:3:0: Attached scsi CD-ROM sr0
><5>sr 0:0:3:0: Attached scsi generic sg0 type 5
><6>Initializing USB Mass Storage driver...
><6>scsi1 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><3>ohci1394: fw-host0: SelfID received outside of bus reset sequence
><6>Device not ready. Make sure there is a disc in the drive.
><6>Device not ready. Make sure there is a disc in the drive.
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800003ff95b]
><6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
><7>dm-netlink version 0.0.2 loaded
><6>loop: loaded (max 8 devices)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Sat Feb 11 14:57:24 2006
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
><notice>acpid start
>acpid: loading ACPI modules ( ac battery button fan processor thermal ) done
>Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/sbin/acpid ]
>[acpid]: starting up
>
>
>[acpid]: 0 rules loaded
>
>
>done
><notice>'acpid start' exits with status 0
><notice>dbus start
>Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
>done
><notice>'dbus start' exits with status 0
><notice>earlysyslog start
>Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=45 HOME=/ SHLVL=2 SPLASH=yes splash=silent selinux=0 ROOTFS_BLKDEV=/dev/hda10 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=45 HOME=/ SHLVL=2 SPLASH=yes splash=silent selinux=0 ROOTFS_BLKDEV=/dev/hda10 _=/sbin/startproc DAEMON=/sbin/klogd ]
>done
><notice>'earlysyslog start' exits with status 0
><notice>fbset start
><notice>'fbset start' exits with status 0
><notice>micasad start
>Starting miCASA daemon<notice>startproc: execve (/opt/novell/CASA/bin/micasad.sh) [ /opt/novell/CASA/bin/micasad.sh ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/opt/novell/CASA/bin/micasad.sh ]
>done
><notice>'micasad start' exits with status 0
><notice>random start
>Initializing random number generatordone
><notice>'random start' exits with status 0
><notice>resmgr start
>Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>done
><notice>'resmgr start' exits with status 0
><notice>earlykbd start
>Loading keymap i386/azerty/be-latin1.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done<notice>'earlykbd start' exits with status 0
><notice>haldaemon start
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
><notice>'haldaemon start' exits with status 0
><notice>earlykdm start
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=en_GB.UTF-8 PREVLEVEL=N LINES=45 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent selinux=0 ROOTFS_BLKDEV=/dev/hda10 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
><notice>'earlykdm start' exits with status 0
><notice>network start
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>doneWaiting for mandatory devices:  eth-id-00:0c:6e:ee:10:3c __NSC__
>18 <notice>checkproc: /opt/kde3/bin/kdm 3361
>16 15 14 10 9 8 <notice>pidofproc: dhcpcd 4116
>
>    eth0      device: nVidia Corporation nForce2 Ethernet Controller (rev a1)
>    eth0      configuration: eth-id-00:0c:6e:ee:10:3c
>    eth0      ifplugd is running
>    eth0      cable is connected
>    eth0      DHCP client (dhcpcd) is running
>    eth0      IP address: 192.168.1.2/24
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>'network start' exits with status 0
><notice>novell-zmd start
>Starting ZENworks Management Daemondone
><notice>'novell-zmd start' exits with status 0
><notice>syslog start
><notice>'syslog start' exits with status 0
><notice>auditd start
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
>Starting RPC portmap daemon<notice>'auditd start' exits with status 0
><notice>portmap start
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
><notice>'portmap start' exits with status 0
><notice>splash_early start
><notice>'splash_early start' exits with status 0
><notice>nfs start
>Importing Net File System (NFS)unused
><notice>'nfs start' exits with status 6
><notice>nfsboot start
>Starting nfsboot (sm-notify) done
><notice>'nfsboot start' exits with status 0
><notice>alsasound start
><notice>'alsasound start' exits with status 0
><notice>microcode start
>Checking/updating CPU microcode unused
><notice>'microcode start' exits with status 6
><notice>running-kernel start
><notice>'running-kernel start' exits with status 0
><notice>splash start
><notice>'splash start' exits with status 0
><notice>sshd start
>Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>done
><notice>'sshd start' exits with status 0
><notice>mdnsd start
>Starting mdnsd<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
>done
><notice>'mdnsd start' exits with status 0
><notice>cups start
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
>done
><notice>'cups start' exits with status 0
><notice>nscd start
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>xend unused
><notice>'nscd start' exits with status 0
><notice>xend start
><notice>'xend start' exits with status 6
><notice>postfix start
>Starting mail service (Postfix)done
>Mount SMB/ CIFS File Systems unused
><notice>'postfix start' exits with status 0
><notice>smbfs start
><notice>'smbfs start' exits with status 6
><notice>xdm start
><notice>checkproc: /opt/kde3/bin/kdm 3361
><notice>'xdm start' exits with status 0
><notice>cron start
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=93 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=45 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda10 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
><notice>'cron start' exits with status 0
><notice>cupsrenice start
>done
><notice>'cupsrenice start' exits with status 0
><notice>SuSEfirewall2_setup start
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
><notice>'SuSEfirewall2_setup start' exits with status 0
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: nfs microcode xend smbfs
><notice>killproc: kill(2876,3)

Actions: View

Attachments on bug 144623: 64402 | 64866 | 64867 | 64884 | 66360 | 66361 | 67766 | 69987 | 69988 | 69990 | 69991