Attachment 67912 Details for Bug 147621

ASUS A8R-MVP without ACPI support in bios

dmesgp3 (text/plain), 17.30 KB, created by Erik Andresen on 2006-02-13 09:59:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Erik Andresen

Created: 2006-02-13 09:59:00 UTC

Size: 17.30 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda6 vga=0x31a selinux=0    resume=/dev/sda8  splash=silent)
>Linux version 2.6.16-rc1-git3-7-smp (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #2 SMP Mon Feb 13 09:17:19 CET 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
> BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fb1e0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x11000504 MSFT 0x00000097) @ 0x000000003ffb0000
>ACPI: FADT (v002 A M I  OEMFACP  0x11000504 MSFT 0x00000097) @ 0x000000003ffb0200
>ACPI: MCFG (v001 A M I  OEMMCFG  0x11000504 MSFT 0x00000097) @ 0x000000003ffb03f0
>ACPI: OEMB (v001 A M I  AMI_OEM  0x11000504 MSFT 0x00000097) @ 0x000000003ffbe040
>ACPI: DSDT (v001  A0387 A0387001 0x00000001 INTL 0x02002026) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000003ffb0000
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000003ffb0000
>No mptable found.
>On node 0 totalpages: 256952
>  DMA zone: 3014 pages, LIFO batch:0
>  DMA32 zone: 253938 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ATI board detected. Using APIC timer.
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
>Checking aperture...
>CPU 0: aperture @ 3a04000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>SMP: Allowing 0 CPUs, 0 hotplug CPUs
>Built 1 zonelists
>Kernel command line: root=/dev/sda6 vga=0x31a selinux=0    resume=/dev/sda8  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1804.116 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>PCI-DMA: Disabling IOMMU.
>Memory: 1017248k/1048256k available (1884k kernel code, 30620k reserved, 880k data, 184k init)
>Calibrating delay using timer specific routine.. 3615.03 BogoMIPS (lpj=7230065)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Node 0 -> Core 0
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>Freeing initrd memory: 2667k freed
> not found!
>    ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
>    ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
>    ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
>    ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43005350
>ACPI: setting ELCR to 0200 (from 0c08)
>weird, boot CPU (#0) not listed by the BIOS.
>SMP motherboard not detected.
>Using local APIC timer interrupts.
>Detected 12.528 MHz APIC timer.
>timer: PIT interrupt stopped.
>spurious 8259A interrupt: IRQ7.
>testing NMI watchdog ... OK.
>SMP disabled
>Brought up 1 CPUs
>time.c: Using PIT/TSC based timekeeping.
>testing NMI watchdog ... OK.
>migration_cost=0
>DMI 2.3 present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 4000-403f claimed by ali7101 ACPI
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:02.0
>  IO window: d000-dfff
>  MEM window: d0000000-d6efffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:1a.0
>  IO window: e000-efff
>  MEM window: d6f00000-d6ffffff
>  PREFETCH window: disabled.
>    ACPI-0201: *** Warning: Device is not power manageable
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1139821703.560:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 84216 bytes,<6>...found (1280x1024, 41888 bytes, v3).
>Console: switching to colour frame buffer device 93x57
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>logips2pp: Detected unknown logitech mouse model 1
>input: PS/2 Logitech Mouse as /class/input/input1
>input: PC Speaker as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>P0P2 P0P3 P0P4 P0P5 P0P6 P0P7 PE2P PS2K PS2M UAR1 USB0 USB1 USB2 UB20 AC97 MC97 AZAL 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 345k
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ALI15X3: IDE controller at PCI slot 0000:00:1f.0
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ALI15X3: chipset revision 200
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: _NEC DVD_RW ND-3551A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>libata version 1.20 loaded.
>ahci 0000:00:1f.1: version 1.2
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ahci 0000:00:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.1: flags: ncq ilck pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFC2000001C900 ctl 0x0 bmdma 0x0 irq 73
>ata2: SATA max UDMA/133 cmd 0xFFFFC2000001C980 ctl 0x0 bmdma 0x0 irq 73
>ata3: SATA max UDMA/133 cmd 0xFFFFC2000001CA00 ctl 0x0 bmdma 0x0 irq 73
>ata4: SATA max UDMA/133 cmd 0xFFFFC2000001CA80 ctl 0x0 bmdma 0x0 irq 73
>ata1: SATA link up 3.0 Gbps (SStatus 123)
>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
>ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ahci
>ata2: SATA link down (SStatus 0)
>scsi1 : ahci
>ata3: SATA link down (SStatus 0)
>scsi2 : ahci
>ata4: SATA link down (SStatus 0)
>scsi3 : ahci
>  Vendor: ATA       Model: ST3160812AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Losing some ticks... checking if CPU frequency changed.
>    ACPI-0717: *** Warning: Processor Device is not present
>    ACPI-0507: *** Warning: Error getting cpuindex for acpiid 0x2
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>Adding 1052216k swap on /dev/sda8.  Priority:-1 extents:1 across:1052216k
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
>ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:1c.0: OHCI Host Controller
>ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:1c.0: irq 10, io mem 0xcfffc000
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ohci_hcd
>usb usb1: SerialNumber: 0000:00:1c.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:1c.1: OHCI Host Controller
>ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:1c.1: irq 11, io mem 0xcfffd000
>ieee1394: Initialized config rom entry `ip1394'
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ohci_hcd
>usb usb2: SerialNumber: 0000:00:1c.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ohci_hcd 0000:00:1c.2: OHCI Host Controller
>ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:1c.2: irq 3, io mem 0xcfffe000
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ohci_hcd
>usb usb3: SerialNumber: 0000:00:1c.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
>ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKP] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKP] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:1c.3: EHCI Host Controller
>ehci_hcd 0000:00:1c.3: debug port 1
>Floppy drive(s): fd0 is 1.44M
>ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1c.3: irq 10, io mem 0xcffffc00
>ehci_hcd 0000:00:1c.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16-rc1-git3-7-smp ehci_hcd
>usb usb4: SerialNumber: 0000:00:1c.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 8 ports detected
>FDC 0 is a post-1991 82077
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.0[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>loop: loaded (max 8 devices)
>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:13.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[d6fff800-d6ffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:14.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>eth0: Marvell Yukon 88E8001 Gigabit Ethernet Controller
>      PrefPort:A  RlmtMode:Check Link State
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000867ad7]
>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1139821728.088:2): AppArmor (version 2.0-19.43r6152) initialized
>
>audit(1139821728.368:3): REJECTING w access to /var/log/boot.msg (klogd(1879) profile /sbin/klogd active /sbin/klogd)
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4094 buckets, 32752 max) - 296 bytes per conntrack
>USB Universal Host Controller Interface driver v2.3
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ReiserFS: loop0: found reiserfs format "3.6" with standard journal
>ReiserFS: loop0: using ordered data mode
>ReiserFS: loop0: journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop0: checking transaction log (loop0)
>ReiserFS: loop0: Using r5 hash to sort names
>ReiserFS: loop0: found reiserfs format "3.6" with standard journal
>ReiserFS: loop0: using ordered data mode
>ReiserFS: loop0: journal params: device loop0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: loop0: checking transaction log (loop0)
>ReiserFS: loop0: Using r5 hash to sort names
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>xfrm_lookup: IPv4 route is stale (obsolete=4294967295, loops=0)
>
>Call Trace: <ffffffff802c8008>{xfrm_lookup+1180} <ffffffff882fab42>{:ipv6:ip6_dst_lookup+484}
>       <ffffffff8831affc>{:ipv6:ip6_datagram_connect+799} <ffffffff8026fdd7>{lock_sock+197}
>       <ffffffff8026fc72>{release_sock+25} <ffffffff8026f093>{sys_connect+118}
>       <ffffffff8010e066>{syscall_trace_enter+190} <ffffffff8010ab34>{tracesys+209}

Actions: View

Attachments on bug 147621: 66642 | 67125 | 67906 | 67912