Attachment 68691 Details for Bug 146542

messages received during installation, ending in megaraid errors

suse10-megaraid-install-screens.txt (text/plain), 5.72 KB, created by Richard Biffl on 2006-02-15 18:22:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard Biffl

Created: 2006-02-15 18:22:35 UTC

Size: 5.72 KB

patch

obsolete

>I tried to get the logs as instructed at http://en.opensuse.org/Bug_Reporting_FAQ#YaST.
>However, when the installation of Suse Linux 10.0 hangs, I cannot find any log files.
>
>If I use Alt-F9 to get a command prompt, typing save_y2logs gives me:
>
>/>save_y2logs /tmp/y2logs.tgz
>save_y2logs: command not found
>
>The /var/log/YaST2 directory is empty.
>
>I have a /var/log/boot.msg file, 11461 bytes, but I can't find a way to copy it to a floppy or 
>otherwise send it. The last lines of that file are similar to, but not as informative as, the 
>Alt-F4 screen copied below.
>
>
>Alt-F1 (default) screen:
>------------------------
>
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduoer deadline registered
>io scheduler cfg registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 66536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices:
>
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 204k freed
>Moving into tmpfs...input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> done.
>created /dev tree (14551 inodes)
>>>> SUSE Linux installation program v1.9.16 (c) 1996-2005 SUSE Linux Products GmbH <<<
>Starting hardware detection...
>activating usb devices... done
>Searching for info file...
>
>*************************************************
>
>Alt-F3 screen:
>--------------
>
>Remount of / ok
>setfont linuxrc2-16.psfu
>CPU: 6, Memory: 998504
>insmod /modules/nvram.ko
>insmod /modules/af_packet.ko
>insmod /modules/nls_cp437.ko
>insmod /modules/nls_iso8859-1.ko
>insmod /modules/fat.ko
>insmod /modules/vfat.ko
>insmod /modules/cramfs.ko
>insmod /modules/cdrom.ko
>insmod /modules/scsi_mod.ko
>insmod /modules/sd_mod.ko
>insmod /modules/sr_mod.ko
>insmod /modules/sg.ko
>insmod /modules/ide-core.ko
>insmod /modules/ide-cd.ko
>insmod /modules/ide-disk.ko
>Beginning hardware probing...
>insmod /modules/usbcore.ko
>insmod /modules/uhci-hcd.ko
>insmod /modules/usbhid.ko
>insmod /modules/usb-storage.ko
>insmod /modules/processor.ko
>insmod /modules/thermal.ko
>insmod /modules/fan.ko
>Hardware probing finished.
>There seems to be no floppy disk.
>got info from cmdline
>insmod /modules/piix.ko
>Ok, that seems to have worked. :-)
>insmod /modules/scsi_transport_spi.ko
>insmod /modules/aic7xxx.ko
>Ok, that seems to have worked. :-)
>insmod /modules/i2o_core.ko
>insmod /modules/i2o_config.ko
>insmod /modules/i2o_block.ko
>insmod /modules/megaraid.ko
>
>
>
>Alt-F4 screen:
>--------------
>
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>hdc: SAMSUNG SC-140B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2930CU SCSI adapter>
>        aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
>
>  Vendor: Seagate   Model: STT20000N         Rev: 7.30
>  Type:   Sequential-Access                  ANSI SCSI revision: 02
> target0:0:4: Beginning Domain Validation
> target0:0:4: Domain Validation skipping write tests
> target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
> target0:0:4: Ending Domain Validation
>Attached scsi generic sg0 at scsi0, channel 0, id 4, lun 0,  type 1
>I2O subsystem v1.288
>i2o: max drivers = 8
>i2o: Checking for PCI I2O controllers...
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>iop0: controller found (0000:02:09.1)
>iop0: PCI I2O controller at F6C00000 size=4194304
>iop0: Installed at IRQ 10
>i2o: iop0: Activating I2O controller...
>i2o: iop0: This may take a few minutes if there are many devices
>i2o: iop0: Timeout Initializing
>i2o: iop0: could not activate controller
>ACPI: PCI interrupt for device 0000:02:09.1 disabled
>PCI_I20: probe of 0000:02:09.1 failed with error -110
>I2O Configuration OSM v1.248
>I2O Block Device OSM v1.287
>block-osm: registered device at major 80
>ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>megaraid: found 0x8086:0x1960:bus 2:slot 9:func 1
>scsi1:Found MegaRAID controller at 0xf8870000, IRQ:10
>megaraid: [1.06:1p00] detected 1 logical drives.
>megaraid: channel[0] is raid.
>megaraid: channel[1] is raid.
>scsi1 : LSI Logic MegaRAID 1.06 254 commands 16 targs 5 chans 7 luns
>scsi1: scanning scsi channel 0 for logical drives.
>megaraid: ABORTING-1 cmd=12 <c=0 t=0 l=0>
>megaraid: ABORTING-1[7d], fw owner.
>
>

Actions: View

Attachments on bug 146542: 68691