Attachment 69297 Details for Bug 152220

Serial console log

minicom.cap (text/plain), 32.90 KB, created by Stephan Binner on 2006-02-20 12:09:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stephan Binner

Created: 2006-02-20 12:09:53 UTC

Size: 32.90 KB

patch

obsolete

>Linux version 2.6.16-rc3-git3-2-smp (geeko@buildhost) (gcc version 4.1.0 20060210 (prerelease) (SUSE Linux)) #1 SMP Wed Feb 15 15:03:23 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f5690
>DMI 2.3 present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x408
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>Overriding APIC driver with bigsmp
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Physflat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda4 vga=0x31a selinux=0    resume=/dev/sda3  splash=silent showopts console=ttyS0,115200
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 3392.305 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 511332k/524224k available (1625k kernel code, 12244k reserved, 736k data, 188k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6796.66 BogoMIPS (lpj=13593334)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2305k freed
> not found!
>CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 04
>Leaving ESR disabled.
>Enabling SMP...
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 6783.57 BogoMIPS (lpj=13567152)
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 04
>Total of 2 processors activated (13580.24 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Enabling SMP...
>Brought up 2 CPUs
>migration_cost=4000
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfba50, last bus=3
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: d0000000-d2ffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: d3000000-d30fffff
>  PREFETCH window: d3100000-d31fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1140220709.596:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>assign_interrupt_mode Found MSI capability
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>assign_interrupt_mode Found MSI capability
>vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: protected mode interface info at c000:e3a0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 84216 bytes,<6>...found (1280x1024, 41888 bytes, v3).
>Console: switching to colour frame buffer device 93x57
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 7, 655360 bytes)
>TCP bind hash table entries: 32768 (order: 7, 655360 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI wakeup devices: 
>PCI0 PEX0 PEX1 PEX2 PEX3 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE AC97 AZAL 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 188k freed
>Write protecting the kernel read-only data: 291k
>Trying manual resume from /dev/sda3
>Starting udevd
>Creating devices
>Loading ide-core
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Loading ide-disk
>Loading scsi_mod
>SCSI subsystem initialized
>Loading sd_mod
>Loading piix
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201
>ICH6: chipset revision 3
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>hda: PIONEER DVD RW DVR-108, ATAPI CD/DVD-ROM drive
>hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Loading libata
>Loading ahci
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 209
>ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part 
>ata1: SATA max UDMA/133 cmd 0xE081C100 ctl 0x0 bmdma 0x0 irq 209
>ata2: SATA max UDMA/133 cmd 0xE081C180 ctl 0x0 bmdma 0x0 irq 209
>ata3: SATA max UDMA/133 cmd 0xE081C200 ctl 0x0 bmdma 0x0 irq 209
>ata4: SATA max UDMA/133 cmd 0xE081C280 ctl 0x0 bmdma 0x0 irq 209
>ata1: SATA link up 1.5 Gbps (SStatus 113)
>ata1: dev 0 ATA-6, max UDMA/133, 488397168 sectors: LBA48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ahci
>ata2: SATA link down (SStatus 0)
>scsi1 : ahci
>ata3: SATA link down (SStatus 0)
>scsi2 : ahci
>ata4: SATA link down (SStatus 0)
>scsi3 : ahci
>  Vendor: ATA       Model: WDC WD2500JD-00H  Rev: 08.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>Loading ata_piix
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Loading processor
>ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060127]
>ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x2 [20060127]
>ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060127]
>ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x3 [20060127]
>Loading thermal
>ACPI: Thermal Zone [THRM] (68 C)
>Loading fan
>ACPI: Fan [FAN] (on)
>Waiting for udev to settle: .. ok
>Loading reiserfs
>Waiting for udev to settle: . ok
>Attempting manual resume
>rootfs: major=8 minor=4 devn=2052
>fsck 1.38 (30-Jun-2005)
>[/bin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/sda4 
>Reiserfs super block in block 16 on 0x804 of format 3.6 with standard journal
>Blocks (total/free): 27647856/12508992 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/sda4' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/sda4
>ReiserFS: sda4: found reiserfs format "3.6" with standard journal
>ReiserFS: sda4: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda4: checking transaction log (sda4)
>ReiserFS: sda4: Using r5 hash to sort names
>INIT: version 2.86 booting
>System Boot Control: Running /etc/init.d/boot
>Mounting procfs at /procdone
>Mounting sysfs at /sysdone
>Initializing /devdone
>Mounting devpts at /dev/ptsdone
>Boot logging started on /dev/ttyS0(/dev/console (deleted)) at Sat Feb 18 00:58:56 2006
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>doneAdding 1036184k swap on /dev/sda3.  Priority:-1 extents:1 across:1036184k
>Activating swap-devices in /etc/fstab...
>doneStarting MD Raid done
>done
>Starting udevd parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>usbcore: registered new driver usbfs
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>usbcore: registered new driver hub
>hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
>USB Universal Host Controller Interface driver v2.3
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000e300
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc3-git3-2-smp uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0)
>hw_random: RNG not detected
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>Linux video capture interface: v1.00
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>saa7130/34: v4l2 driver version 0.2.14 loaded
>usb 1-2: new device found, idVendor=04f2, idProduct=0200
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: USB Wireless HID Receiver
>usb 1-2: Manufacturer: Chicony
>usb 1-2: configuration #1 chosen from 1 choice
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: irq 217, io mem 0xd3204000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb 1-2: USB disconnect, address 2
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc3-git3-2-smp ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000e000
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc3-git3-2-smp uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 201, io base 0x0000e100
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16-rc3-git3-2-smp uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000e200
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.16-rc3-git3-2-smp uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-8: new high speed USB device using ehci_hcd and address 3
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 209
>PCI: Via IRQ fixup for 0000:03:03.0, from 11 to 1
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209]  MMIO=[d3001000-d30017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 225
>saa7134[0]: found at 0000:03:01.0, rev: 1, irq: 225, latency: 32, mmio: 0xd3000000
>saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
>saa7134[0]: board init: gpio is 0
>usb 2-8: new device found, idVendor=05e3, idProduct=0605
>usb 2-8: new device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-8: Product: USB2.0 Hub
>usb 2-8: configuration #1 chosen from 1 choice
>hub 2-8:1.0: USB hub found
>hub 2-8:1.0: 4 ports detected
>saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
>saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b
>saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
>saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 00 00 fd 79 44 9f c2 8f
>saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff 06 06 0f 00 0f 00 0f 00 0f 00
>saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0] Board has DVB-T
>saa7134[0] Tuner type is 63
>tuner 1-0061: chip found @ 0xc2 (saa7134[0])
>tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>tda9887 1-0043: chip found @ 0x86 (saa7134[0])
>saa7134[0]: registered device video0 [v4l2]
>saa7134[0]: registered device vbi0
>saa7134[0]: registered device radio0
>ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 18 (level, low) -> IRQ 201
>PCI: Via IRQ fixup for 0000:03:06.0, from 10 to 9
>eth0: VIA Rhine III at 0x1d300, 00:11:09:a0:69:24, IRQ 201.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0081.
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 18 (level, low) -> IRQ 201
>usb 1-2: new device found, idVendor=04f2, idProduct=0200
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: USB Wireless HID Receiver
>usb 1-2: Manufacturer: Chicony
>usb 1-2: configuration #1 chosen from 1 choice
>usb 2-8.1: new high speed USB device using ehci_hcd and address 4
>usb 2-8.1: new device found, idVendor=148f, idProduct=2570
>usb 2-8.1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-8.1: Product: 802.11g WLAN
>usb 2-8.1: Manufacturer: Ralink
>usb 2-8.1: configuration #1 chosen from 1 choice
>usb 2-8.2: new full speed USB device using ehci_hcd and address 5
>usb 2-8.2: new device found, idVendor=0db0, idProduct=6855
>usb 2-8.2: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-8.2: Product: SiW
>usb 2-8.2: Manufacturer: SiW
>usb 2-8.2: SerialNumber: 07F856091100
>usb 2-8.2: configuration #1 chosen from 1 choice
>Bluetooth: Core ver 2.8
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usb 2-8.3: new low speed USB device using ehci_hcd and address 6
>usb 2-8.3: new device found, idVendor=0bc7, idProduct=0006
>usb 2-8.3: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-8.3: Product: USB Receiver
>usb 2-8.3: Manufacturer: X10 Wireless Technology Inc
>usb 2-8.3: configuration #1 chosen from 1 choice
>usb 2-8.4: new high speed USB device using ehci_hcd and address 7
>usb 2-8.4: new device found, idVendor=0db0, idProduct=4023
>usb 2-8.4: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-8.4: Product: Card Reader V0.1C
>usb 2-8.4: Manufacturer: Generic
>usb 2-8.4: SerialNumber: AAAA12345678
>usb 2-8.4: configuration #1 chosen from 1 choice
>usbcore: registered new driver hiddev
>input: X10 Wireless Technology Inc USB Receiver as /class/input/input2
>usbcore: registered new driver hci_usb
>usbcore: registered new driver ati_remote
>drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
>drivers/usb/input/ati_remote.c: Weird data, len=1 ff a9 a9 a9 a9 a9 ...
>input: Chicony USB Wireless HID Receiver as /class/input/input3
>input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-2
>input: Chicony USB Wireless HID Receiver as /class/input/input4
>input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-2
>Initializing USB Mass Storage driver...
>input: Chicony USB Wireless HID Receiver as /class/input/input5
>input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on usb-0000:00:1d.0-2
>usbcore: registered new driver usbhid
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb de9df774 err -28
>hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb de9df774 err -28
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.7
>done
>Activating device mapper...
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>Creating /dev/mapper/control character device with major:10 minor:63.
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>Checking all file systems.
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>loop: loaded (max 8 devices)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>NTFS driver 2.1.25 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>/dev/sda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
>/dev/sda5 on /windows/D type vfat (rw)
>donedone
>Loading required kernel modules
>doneAppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1140220749.470:2): AppArmor (version 2.0-19.43r6152) initialized
>
>Setting up the hardware clockdone
>Loading AppArmor module done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
>Creating /var/log/boot.msg
>doneActivating remaining swap-devices in /etc/fstab...
>done  Vendor: Generic   Model: CF Card       CF  Rev: 0.1C
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:0: Attached scsi removable disk sdb
>sd 4:0:0:0: Attached scsi generic sg1 type 0
>  Vendor: Generic   Model: MS/SD Combo   MS  Rev: 0.1C
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:1: Attached scsi removable disk sdc
>sd 4:0:0:1: Attached scsi generic sg2 type 0
>  Vendor: Generic   Model: SM/xD Combo   SM  Rev: 0.1C
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:2: Attached scsi removable disk sdd
>sd 4:0:0:2: Attached scsi generic sg3 type 0
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Setting up hostname 'klempnerei'done
>Setting up NIS domainname 'suse.de'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>doneINIT: Entering runlevel: 5
>Boot logging started on /dev/ttyS0(/dev/console) at Fri Feb 17 23:59:18 2006
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>/tmp/noautobuild created
>Starting syslog servicesdone
>Starting D-BUS daemondone
>Initializing random number generatordone
>Starting resource managerdone
>acpid: loading ACPI modules ( ac battery button ) done
>Starting acpid done
>Starting HAL daemondone
>Starting irqbalance done
>eth0: link up, 100Mbps, half-duplex, lpa 0x0081
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneNET: Registered protocol family 17
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>done    eth0      device: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
>    eth0      configuration: eth-id-00:11:09:a0:69:24
>done    wlan0     device: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
>    wlan0     configuration: wlan-bus-pci-0000:03:02.0
>    wlan0     is controlled by ifplugd
>dhclient is already running for some interface. Stop it first.
>If you want to run dhcp on several  interfaces, please use dhcpcd.
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Starting mdnsddone
>Starting RPC portmap daemondone
>Importing Net File System (NFS)unused
>wlan0: New link status: Connected (0001)
>Starting Distributed Compiler Daemondone
>Starting nfsboot (sm-notify) IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>done
>microcode: CPU0 updated from revision 0x14 to 0x17, date = 04212005 
>microcode: CPU1 updated from revision 0x14 to 0x17, date = 04212005 
>IA-32 Microcode Update Driver v1.14 unregistered
>Checking/updating CPU microcode done
>Starting ZENworks Management Daemondone
>Starting auditd done
>Starting up sensors: done
>Starting SMPPPDdone
>Starting SSH daemondone
>Mount SMB/ CIFS File Systems unused
>Starting powersaved: done
>Starting ypbinddone
>Try to get initial date and time via NTP from ntp1 ntp2done
>Starting network time protocol daemon (NTPD)done
>Starting Name Service Cache Daemondone
>Starting service automounterdone
>Starting mail service (Postfix)done
>Starting CRON daemondone
>Starting autobuild: Shutting down stale autobuild runs... 
>Starting new autobuild... 
>abuild: Mailing notification to autobuild@suse.de...done
>Starting Big Sister uxmon uxmon-netdone
>Starting service kdmdone
>Starting service kdmdone
>Starting cupsddone
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: nfs smbfs
>SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount 
>INIT: version 2.86 reloading
>INIT: version 2.86 reloading
>INIT: Switching to runlevel: 6
>INIT: Sending processes the TERM signal
>Boot logging started on /dev/ttyS0(/dev/console) at Mon Feb 20 12:50:58 2006
>Master Resource Control: previous runlevel: 5, switching to runlevel: 6
>Shutting down CRON daemondone
>Shutting down auditd done
>Shutting down mdnsd done
>Shutting down irqbalance done
>Shutting down Name Service Cache Daemondone
>Shutting down Distributed Compiler Daemondone
>Shutting down cupsddone
>/usr/sbin/alsactl: save_state:1163: No soundcards found...
>Saving random seeddone
>Shutting down sensors: failed
>Shutting down Big Sister uxmon done
>Shutting down network time protocol daemon (NTPD)done
>Shutting down SMPPPDdone
>Shutting down mail service (Postfix)done
>Umount SMB/ CIFS File Systems done
>Shutting down service kdmdone
>Shutting down service kdmdone
>Shutting down powersaved done
>Shutting down autobuild:abuild-bs: no process killed
>Killed autobuild(pgid 4647) with signal 15
>autobuild: no process killed
>done
>Shutting down SSH daemondone
>/etc/init.d/kbd stopdone
>Shutting down service automountdone
>Shutting down ypbinddone
>Remove Net File System (NFS)unused
>Shutting down RPC portmap daemondone
>Shutting down syslog servicesdone
>Shutting down ZENworks Management Daemonfailed
>Shutting down network interfaces:
>modprobe: FATAL: Could not load /lib/modules/2.6.16-rc3-git3-2-smp/modules.dep: No such file or directory
>
>modprobe: FATAL: Could not load /lib/modules/2.6.16-rc3-git3-2-smp/modules.dep: No such file or directory
>
>    eth0      device: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
>    eth0      configuration: eth-id-00:11:09:a0:69:24
>done    wlan0     device: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
>    wlan0     configuration: wlan-bus-pci-0000:03:02.0
>donemodprobe: FATAL: Could not load /lib/modules/2.6.16-rc3-git3-2-smp/modules.dep: No such file or directory
>
>Shutting down service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Shutting down HAL daemondone
>[acpid]: exiting
>
>Shutting down resource managerdone
>Shutting down D-BUS daemondone
>Shutting down acpid done
>Running /etc/init.d/halt.local
>done------------[ cut here ]------------
>kernel BUG at kernel/signal.c:978!
>invalid opcode: 0000 [#1]
>SMP 
>last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
>Modules linked in: usbserial binfmt_misc nfs lockd nfs_acl sunrpc autofs4 ipv6 eeprom snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet edd button battery ac apparmor aamatch_pcre nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs loop dm_mod rfcomm hidp l2cap usb_storage ati_remote hci_usb bluetooth usbhid tda9887 tuner orinoco_pci orinoco hermes saa7134 video_buf compat_ioctl32 v4l2_common v4l1_compat ir_kbd_i2c ir_common via_rhine mii ohci1394 ieee1394 videodev ehci_hcd i2c_i801 i2c_core snd_hda_intel i8xx_tco snd_hda_codec intel_agp agpgart generic snd_pcm snd_timer snd soundcore snd_page_alloc shpchp pci_hotplug uhci_hcd ide_cd usbcore cdrom parport_pc lp parport reiserfs fan thermal processor sg ata_piix ahci libata piix sd_mod scsi_mod ide_disk ide_core
>CPU:    0
>EIP:    0060:[<c0129662>]    Tainted: G     U VLI
>EFLAGS: 00010093   (2.6.16-rc3-git3-2-smp #1) 
>EIP is at __group_complete_signal+0x7c/0x22a
>eax: 0000104f   ebx: c2d5baa0   ecx: 00000000   edx: d60a5aa0
>esi: d60a5aa0   edi: 0000000e   ebp: 0000000f   esp: df36bed0
>ds: 007b   es: 007b   ss: 0068
>Process killall5 (pid: 1861, threadinfo=df36a000 task=ca8a4550)
>Stack: <0>00000000 d60a5aa0 0000000f dfec3f80 c0129884 dfec3a7c 00000000 00000282 
>       c0129f3b d60a5aa0 df36bf28 0000000f 0000000f fffffffd 00000000 df36bf28 
>       c0129fd0 0000104f 0804d128 00000745 0000000f c012ad6f 0000000f 00000000 
>Call Trace:
> [<c0129884>] __group_send_sig_info+0x74/0x7e
> [<c0129f3b>] group_send_sig_info+0x93/0xa8
> [<c0129fd0>] kill_proc_info+0x50/0x67
> [<c012ad6f>] sys_kill+0xe7/0xf3
> [<c029309f>] schedule+0xaab/0xb28
> [<c01400a7>] audit_syscall_entry+0x118/0x13f
> [<c0106d72>] do_syscall_trace+0x123/0x169
> [<c0103c29>] syscall_call+0x7/0xb
>Code: 86 e4 00 00 00 0f 84 c9 01 00 00 8b 86 6c 04 00 00 8b 58 20 85 db 75 05 89 70 20 89 f3 8b 86 a4 00 00 00 39 83 a4 00 00 00 74 08 <0f> 0b d2 03 d6 06 2c c0 0f a3 bb 74 04 00 00 19 c0 85 c0 75 32 
> <3>Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
>in_atomic():0, irqs_disabled():1
> [<c01218ce>] profile_task_exit+0x18/0x48
> [<c012318b>] do_exit+0x1c/0x6dd
> [<c0120c13>] printk+0x14/0x18
> [<c0105620>] show_stack+0x0/0xa
> [<c0105c1e>] do_invalid_op+0x0/0x9d
> [<c0105caf>] do_invalid_op+0x91/0x9d
> [<c0129662>] __group_complete_signal+0x7c/0x22a
> [<c011b3dc>] __wake_up_sync+0x31/0x4b
> [<c0129986>] do_notify_parent_cldstop+0xf8/0x100
> [<c011a305>] activate_task+0x9d/0xaa
> [<c0104e3f>] error_code+0x4f/0x60
> [<c0129662>] __group_complete_signal+0x7c/0x22a
> [<c0129884>] __group_send_sig_info+0x74/0x7e
> [<c0129f3b>] group_send_sig_info+0x93/0xa8
> [<c0129fd0>] kill_proc_info+0x50/0x67
> [<c012ad6f>] sys_kill+0xe7/0xf3
> [<c029309f>] schedule+0xaab/0xb28
> [<c01400a7>] audit_syscall_entry+0x118/0x13f
> [<c0106d72>] do_syscall_trace+0x123/0x169
> [<c0103c29>] syscall_call+0x7/0xb
>BUG: spinlock cpu recursion on CPU#0, killall5/1864
> lock: dfec3f80, .magic: dead4ead, .owner: kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk¥kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk [<c01be2dc>] _raw_spin_lock+0x47/0xd8
> [<c029436f>] _spin_lock_irqsave+0x9/0xd
> [<c0129ef1>] group_send_sig_info+0x49/0xa8
> [<c012ad2b>] sys_kill+0xa3/0xf3
> [<c01400a7>] audit_syscall_entry+0x118/0x13f
> [<c0106d72>] do_syscall_trace+0x123/0x169
> [<c0103c29>] syscall_call+0x7/0xb

Actions: View

Attachments on bug 152220: 69297