Attachment 69391 Details for Bug 152237

Initrd messages

SuSE101b4-b.TXT (text/plain), 14.16 KB, created by Clyde Kunkel on 2006-02-20 18:43:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Clyde Kunkel

Created: 2006-02-20 18:43:44 UTC

Size: 14.16 KB

patch

obsolete

>Booting 'SUSE LINUX 10.0.42'
>
>root (hd0,5)
> Filesystem type is ext2fs, partition type 0x83
>kernel /vmlinuz root=/dev/VolGroup1/SuSE101b4 selinux=0    resume=/dev/hda2  co
>nsole=ttyS0,19200n8
>   [Linux-bzImage, setup=0x1e00, size=0x145120]
>initrd /initrd
>   [Linux-initrd @ 0x1fd5e000, 0x291c28 bytes]
>
>Linux version 2.6.16-rc3-git3-2-smp (geeko@buildhost) (gcc version 4.1.0 20060210 (prerelease) (SUSE Linux)) #1 SMP Wed Feb 15 15:03:23 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>DMI 2.3 present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>Overriding APIC driver with bigsmp
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Physflat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
>Built 1 zonelists
>Kernel command line: root=/dev/VolGroup1/SuSE101b4 selinux=0    resume=/dev/hda2  console=ttyS0,19200n8
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2999.130 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029256k/1047744k available (1625k kernel code, 17732k reserved, 736k data, 188k init, 130240k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6006.80 BogoMIPS (lpj=12013601)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2631k freed
> not found!
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>Leaving ESR disabled.
>Enabling SMP...
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5997.57 BogoMIPS (lpj=11995144)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>Total of 2 processors activated (12004.37 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Enabling SMP...
>Brought up 2 CPUs
>migration_cost=4000
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0b: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: b7f00000-d7efffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: d7f00000-f7efffff
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1140441430.236:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI wakeup devices: 
>P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K PS2M ILAN 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 188k freed
>Write protecting the kernel read-only data: 291k
>Trying manual resume from /dev/hda2
>Starting udevd
>Creating devices
>Loading ide-coreUniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Loading ide-disk
>Loading scsi_modSCSI subsystem initialized
>
>Loading sd_mod
>Loading piix
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>hda: Maxtor 6Y120L0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
> hda18 hda19 hda20 >
>hdc: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Loading libata
>Loading ata_piix
>FATAL: Module ahACPI: PCI Interrupt 0000:00:1f.2[A] -> ci not found.
>GSI 18 (level, low) -> IRQ 169
>ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 169
>ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 169
>ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ata_piix
>ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
>ata2: dev 0 configured for UDMA/133
>scsi1 : ata_piix
>  Vendor: ATA       Model: ST3250823AS       Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: ATA       Model: ST3250823AS       Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3
>sd 1:0:0:0: Attached scsi disk sdb
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Loading sata_proACPI: PCI Interrupt 0000:02:04.0[A] -> mise
>GSI 23 (level, low) -> IRQ 177
>ata3: SATA max UDMA/133 cmd 0xF881A200 ctl 0xF881A238 bmdma 0x0 irq 177
>ata4: SATA max UDMA/133 cmd 0xF881A280 ctl 0xF881A2B8 bmdma 0x0 irq 177
>ata3: SATA link up 1.5 Gbps (SStatus 113)
>ata3: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA
>ata3(0): applying bridge limits
>ata3: dev 0 configured for UDMA/100
>scsi2 : sata_promise
>ata4: SATA link up 1.5 Gbps (SStatus 113)
>ata4: dev 0 ATA-6, max UDMA/133, 234441648 sectors: LBA
>ata4(0): applying bridge limits
>ata4: dev 0 configured for UDMA/100
>scsi3 : sata_promise
>  Vendor: ATA       Model: ST3120023AS       Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
>sdc: Write Protect is off
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
>sdc: Write Protect is off
>SCSI device sdc: drive cache: write back
> sdc: sdc1
>sd 2:0:0:0: Attached scsi disk sdc
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>  Vendor: ATA       Model: ST3120023AS       Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB)
>sdd: Write Protect is off
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB)
>sdd: Write Protect is off
>SCSI device sdd: drive cache: write back
> sdd: sdd1
>sd 3:0:0:0: Attached scsi disk sdd
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>Loading processor
>Loading thermal
>Loading fan
>Loading xor
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  3861.000 MB/sec
>raid5: using function: pIII_sse (3861.000 MB/sec)
>Loading raid5
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>Loading raid1
>md: raid1 personality registered for level 1
>Loading dm-mod
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>Loading dm-snapshot
>Waiting for /dev/mapper/control to appear:  ok
>Loading jbd
>Loading ext3
>****************************************************************************
>mdadm: Bad super-minor number: .
>  Unable to find vAttempting manual resume
>olume group "VolGroup1"
>****************************************************************************
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sdc1>
>md: bind<sda1>
>raid5: device sda1 operational as raid disk 0
>raid5: device sdc1 operational as raid disk 2
>raid5: device sdb1 operational as raid disk 1
>raid5: allocated 3165kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3 fd:0
> disk 0, o:1, dev:sda1
> disk 1, o:1, dev:sdb1
> disk 2, o:1, dev:sdc1
>mdadm: /dev/md0 md: md1 stopped.
>has been startedmd: bind<sdb2>
> with 3 drives.
>md: bind<sdd1>
>
>md: bind<sda2>
>raid5: device sda2 operational as raid disk 0
>raid5: device sdd1 operational as raid disk 2
>raid5: device sdb2 operational as raid disk 1
>raid5: allocated 3165kB for md1
>raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3 fd:0
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdb2
> disk 2, o:1, dev:sdd1
>mdadm: /dev/md1 md: md2 stopped.
>has been started with 3 drives.
>md: bind<sdb3>
>md: bind<sda3>
>raid1: raid set md2 active with 2 out of 2 mirrors
>********************************************************************
>mdadm: /dev/md2 has been started with 2 drives.
>not found -- exiting to /bin/sh
>$ vgchange -a y VolGroup1
>  11 logical volume(s) in volume group "VolGroup1" now active
>$ exit
>exit
>***************************************************************************
>fsck 1.38 (30-Jun-2005)
>[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup1/SuSE101b4 
>/dev/VolGroup1/SuSE101b4: clean, 143812/2621440 files, 866564/5242880kjournald starting.  Commit interval 5 seconds
> blocks
>fsck suEXT3 FS on dm-9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>cceeded. Mounting root device read-write.
>Mounting root /dev/VolGroup1/SuSE101b4
>
>INIT: version 2.86 booting
>
>System Boot Control: Running /etc/init.d/boot

Actions: View

Attachments on bug 152237: 69360 | 69362 | 69391 | 69471 | 70799