Attachment 69428 Details for Bug 151473

hwinfo file in text format

hwinfo.txt (text/plain), 173.79 KB, created by David Todd on 2006-02-21 06:57:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Todd

Created: 2006-02-21 06:57:26 UTC

Size: 173.79 KB

patch

obsolete

>============ start debug info ============
>libhd version 12.1 (x86-64)
>kernel version is 2.6
>----- /proc/cmdline -----
>  BOOT_IMAGE=linux initrd=initrd,12801024.spl splash=silent vga=0x31a
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 1867778 at 0x2b30fdb75000
>>> hal.1: read hal data
>  hal: connected to: :1.25
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/volume_label_SU10042B_001'
>  volume.unmount.valid_options = { 'lazy' }
>  volume.mount.valid_other_fs = { 'subfs' }
>  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'uid=', 'mode=', 'iocharset=' }
>  org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
>  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
>  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
>  volume.ignore = false
>  volume.policy.desired_mount_point = 'SU10042B.001'
>  volume.policy.mount_filesystem = 'iso9660'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_label_SU10042B_001'
>  info.product = 'SU10042B.001'
>  volume.disc.is_svcd = false
>  volume.disc.is_vcd = false
>  volume.disc.is_videodvd = false
>  volume.disc.is_rewritable = false
>  volume.disc.is_appendable = false
>  volume.disc.is_blank = false
>  volume.disc.has_data = true
>  volume.disc.has_audio = false
>  volume.disc.type = 'cd_rom'
>  volume.size = 703039488ull (0x29e78800ull)
>  volume.num_blocks = 1373124 (0x14f3c4)
>  volume.block_size = 2048 (0x800)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = true
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = 'SU10042B.001'
>  volume.uuid = ''
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'iso9660'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR'
>  block.is_volume = true
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR'
>  linux.sysfs_path_device = '/sys/block/hda/fakevolume'
>  linux.sysfs_path = '/sys/block/hda/fakevolume'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_FAN'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_FAN'
>  linux.hotplug_type = 4 (0x4)
>  fan.enabled = true
>  info.capabilities = { 'fan' }
>  info.category = 'fan'
>  info.product = 'Fan'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 2 (0x2)
>  linux.acpi_path = '/proc/acpi/fan/FAN'
>
>  2: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = false
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  3: udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
>  storage.policy.desired_mount_point = 'floppy'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
>  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  storage.drive_type = 'floppy'
>  info.product = 'PC Floppy Drive'
>  info.vendor = ''
>  storage.vendor = 'PC Floppy Drive'
>  storage.model = ''
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = true
>  storage.bus = 'platform'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 2 (0x2)
>  block.device = '/dev/fd0'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  linux.sysfs_path_device = '/sys/block/fd0'
>  linux.sysfs_path = '/sys/block/fd0'
>
>  4: udi = '/org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR'
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'dvdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR'
>  storage.cdrom.write_speeds = { '8467' }
>  storage.cdrom.write_speed = 8467 (0x2113)
>  storage.cdrom.read_speed = 8467 (0x2113)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = true
>  storage.cdrom.dvdplusrw = true
>  storage.cdrom.dvdplusr = true
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = true
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = 'A070'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'AOPEN DUW1608/ARR'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'AOPEN DUW1608/ARR'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  5: udi = '/org/freedesktop/Hal/devices/storage_model_MATSHITA_CR_583'
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrom'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_MATSHITA_CR_583'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_MATSHITA_CR_583'
>  storage.cdrom.write_speed = 0 (0x0)
>  storage.cdrom.read_speed = 1412 (0x584)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = false
>  storage.cdrom.cdrw = false
>  storage.cdrom.cdr = false
>  storage.firmware_version = '1.04'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'MATSHITA CR-583'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_1'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'MATSHITA CR-583'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 64 (0x40)
>  block.major = 3 (0x3)
>  block.device = '/dev/hdb'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_1'
>  linux.sysfs_path_device = '/sys/block/hdb'
>  linux.sysfs_path = '/sys/block/hdb'
>
>  6: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (vesafb.0)'
>  platform.id = 'vesafb.0'
>  info.linux.driver = 'vesafb'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/vesafb.0'
>  linux.sysfs_path = '/sys/devices/platform/vesafb.0'
>
>  7: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  8: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event0'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event0'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/input0/event0'
>
>  9: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  10: udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (i8042)'
>  platform.id = 'i8042'
>  info.linux.driver = 'i8042'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042'
>  linux.sysfs_path = '/sys/devices/platform/i8042'
>
>  11: udi = '/org/freedesktop/Hal/devices/platform_serial8250_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250_serial_platform_0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'Platform Device (serial8250)'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/platform_serial8250'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/platform_serial8250'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  12: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (serial8250)'
>  platform.id = 'serial8250'
>  info.linux.driver = 'serial8250'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/serial8250'
>  linux.sysfs_path = '/sys/devices/platform/serial8250'
>
>  13: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  input.product = 'PC Speaker'
>  info.product = 'PC Speaker'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  linux.sysfs_path = '/sys/class/input/input1/event1'
>
>  14: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (pcspkr)'
>  platform.id = 'pcspkr'
>  info.linux.driver = 'pcspkr'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/pcspkr'
>  linux.sysfs_path = '/sys/devices/platform/pcspkr'
>
>  15: udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (floppy.0)'
>  platform.id = 'floppy.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/floppy.0'
>  linux.sysfs_path = '/sys/devices/platform/floppy.0'
>
>  16: udi = '/org/freedesktop/Hal/devices/pci_1039_755'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_755'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = '755 Host'
>  pci.product = '755 Host'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 1877 (0x755)
>  info.linux.driver = 'agpgart-amd64'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  17: udi = '/org/freedesktop/Hal/devices/pci_10de_f1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_f1'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x3150)'
>  pci.subsys_vendor = 'Giga-byte Technology'
>  info.product = 'NV43 [GeForce 6600/GeForce 6600 GT]'
>  pci.product = 'NV43 [GeForce 6600/GeForce 6600 GT]'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 5208 (0x1458)
>  pci.subsys_product_id = 12624 (0x3150)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 241 (0xf1)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_2'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>
>  18: udi = '/org/freedesktop/Hal/devices/pci_1039_2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_2'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'SG86C202'
>  pci.product = 'SG86C202'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 2 (0x2)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  19: udi = '/org/freedesktop/Hal/devices/pci_1039_964'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_964'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'SiS964 [MuTIOL Media IO]'
>  pci.product = 'SiS964 [MuTIOL Media IO]'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 2404 (0x964)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_5513'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.5/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.5/ide0/0.0'
>
>  21: udi = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_5513_ide_0_1'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (slave)'
>  ide.channel = 1 (0x1)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_5513'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.5/ide0/0.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.5/ide0/0.1'
>
>  22: udi = '/org/freedesktop/Hal/devices/pci_1039_5513'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_5513'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = '5513 [IDE]'
>  pci.product = '5513 [IDE]'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 128 (0x80)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 21779 (0x5513)
>  info.linux.driver = 'SIS_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.5'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.5'
>
>  23: udi = '/org/freedesktop/Hal/devices/pci_1039_7012'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_7012'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'Sound Controller'
>  pci.product = 'Sound Controller'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 28690 (0x7012)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.7'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.7'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.7'
>
>  24: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:03.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0'
>
>  25: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0_logicaldev_input'
>  input.product = 'Logitech Logitech Extreme 3D'
>  info.product = 'Logitech Logitech Extreme 3D'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.joystick' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0'
>  linux.sysfs_path = '/sys/class/input/input2/event2'
>
>  26: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1133 (0x46d)
>  usb.product_id = 49685 (0xc215)
>  usb.vendor = 'Logitech, Inc.'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 516 (0x204)
>  usb.max_power = 30 (0x1e)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0'
>
>  27: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_usbraw'
>  linux.device_file = '/dev/bus/usb/002/002'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/002/002'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev2.2'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c215_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 336 (0x150)
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 30 (0x1e)
>  usb_device.device_revision_bcd = 516 (0x204)
>  info.product = 'Logitech Extreme 3D'
>  usb_device.product = 'Logitech Extreme 3D'
>  info.vendor = 'Logitech, Inc.'
>  usb_device.vendor = 'Logitech, Inc.'
>  usb_device.product_id = 49685 (0xc215)
>  usb_device.vendor_id = 1133 (0x46d)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-1'
>
>  29: udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0_logicaldev_input'
>  input.product = 'ELECOM ELECOM USB mouse with wheel '
>  info.product = 'ELECOM ELECOM USB mouse with wheel '
>  linux.device_file = '/dev/input/event3'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event3'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0'
>  linux.sysfs_path = '/sys/class/input/input3/event3'
>
>  30: udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1390 (0x56e)
>  usb.product_id = 51 (0x33)
>  usb.vendor = 'Elecom Co., Ltd'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 256 (0x100)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 3 (0x3)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial_usbraw'
>  linux.device_file = '/dev/bus/usb/002/003'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/002/003'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev2.3'
>
>  32: udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_56e_33_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 336 (0x150)
>  usb_device.linux.device_number = 3 (0x3)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 100 (0x64)
>  usb_device.device_revision_bcd = 256 (0x100)
>  info.product = 'ELECOM USB mouse with wheel'
>  usb_device.product = 'ELECOM USB mouse with wheel'
>  info.vendor = 'Elecom Co., Ltd'
>  usb_device.vendor = 'Elecom Co., Ltd'
>  usb_device.product_id = 51 (0x33)
>  usb_device.vendor_id = 1390 (0x56e)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-2'
>
>  33: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_usbraw'
>  linux.device_file = '/dev/bus/usb/002/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/002/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'
>
>  34: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:03.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_7001_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_1039_7001_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_7001_1'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'USB 1.0 Controller'
>  pci.product = 'USB 1.0 Controller'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 28673 (0x7001)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>
>  36: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:03.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0'
>
>  37: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1_usbraw'
>  linux.device_file = '/dev/bus/usb/003/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/003/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev3.1'
>
>  38: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:03.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_7001_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.1/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1/usb3'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_1039_7001_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_7001_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'USB 1.0 Controller'
>  pci.product = 'USB 1.0 Controller'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 28673 (0x7001)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1'
>
>  40: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:03.2'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0'
>
>  41: udi = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Vendor Specific Interface'
>  usb.interface.protocol = 255 (0xff)
>  usb.interface.subclass = 255 (0xff)
>  usb.interface.class = 255 (0xff)
>  usb.interface.number = 0 (0x0)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 3141 (0xc45)
>  usb.product_id = 24613 (0x6025)
>  usb.vendor = 'Microdia'
>  usb.product = 'USB Vendor Specific Interface'
>  usb.device_revision_bcd = 257 (0x101)
>  usb.max_power = 500 (0x1f4)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = false
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0'
>
>  42: udi = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial_usbraw'
>  linux.device_file = '/dev/bus/usb/004/002'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/004/002'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev4.2'
>
>  43: udi = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_c45_6025_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 500 (0x1f4)
>  usb_device.device_revision_bcd = 257 (0x101)
>  info.product = 'USB camera'
>  usb_device.product = 'USB camera'
>  info.vendor = 'Microdia'
>  usb_device.vendor = 'Microdia'
>  usb_device.product_id = 24613 (0x6025)
>  usb_device.vendor_id = 3141 (0xc45)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4/4-1'
>
>  44: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2_usbraw'
>  linux.device_file = '/dev/bus/usb/004/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/004/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev4.1'
>
>  45: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:03.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.16-rc1-git3-7-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_7001'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.2/usb4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2/usb4'
>
>  46: udi = '/org/freedesktop/Hal/devices/pci_1039_7001'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_7001'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'USB 1.0 Controller'
>  pci.product = 'USB 1.0 Controller'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 28673 (0x7001)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.2'
>
>  47: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.16-rc1-git3-7-default ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 8 (0x8)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:03.3'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0'
>
>  48: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3_usbraw'
>  linux.device_file = '/dev/bus/usb/001/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/001/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'
>
>  49: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:00:03.3'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 8 (0x8)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.16-rc1-git3-7-default ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.16-rc1-git3-7-default ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1039_7002'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.3/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3/usb1'
>
>  50: udi = '/org/freedesktop/Hal/devices/pci_1039_7002'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_7002'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'USB 2.0 Controller'
>  pci.product = 'USB 2.0 Controller'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 28674 (0x7002)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.3'
>
>  51: udi = '/org/freedesktop/Hal/devices/pci_1039_900'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_900'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'SiS900 PCI Fast Ethernet'
>  pci.product = 'SiS900 PCI Fast Ethernet'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 2304 (0x900)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:04.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
>
>  52: udi = '/org/freedesktop/Hal/devices/pci_1039_180'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1039_180'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1891)'
>  pci.subsys_vendor = 'Elitegroup Computer Systems'
>  info.product = 'RAID bus controller 180 SATA/PATA  [SiS]'
>  pci.product = 'RAID bus controller 180 SATA/PATA  [SiS]'
>  info.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.vendor = 'Silicon Integrated Systems [SiS]'
>  pci.device_protocol = 133 (0x85)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4121 (0x1019)
>  pci.subsys_product_id = 6289 (0x1891)
>  pci.vendor_id = 4153 (0x1039)
>  pci.product_id = 384 (0x180)
>  info.linux.driver = 'SIS_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:05.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0'
>
>  53: udi = '/org/freedesktop/Hal/devices/pci_17fe_2120'
>  info.udi = '/org/freedesktop/Hal/devices/pci_17fe_2120'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0020)'
>  pci.subsys_vendor = 'Linksys'
>  info.product = 'WMP11v4 802.11b PCI card'
>  pci.product = 'WMP11v4 802.11b PCI card'
>  info.vendor = 'Linksys, A Division of Cisco Systems'
>  pci.vendor = 'Linksys, A Division of Cisco Systems'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 5943 (0x1737)
>  pci.subsys_product_id = 32 (0x20)
>  pci.vendor_id = 6142 (0x17fe)
>  pci.product_id = 8480 (0x2120)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0a.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'
>
>  54: udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
>  pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4352 (0x1100)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'
>
>  55: udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] Address Map'
>  pci.product = 'K8 [Athlon64/Opteron] Address Map'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4353 (0x1101)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'
>
>  56: udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] DRAM Controller'
>  pci.product = 'K8 [Athlon64/Opteron] DRAM Controller'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4354 (0x1102)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'
>
>  57: udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'
>  pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4355 (0x1103)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'
>
>  58: udi = '/org/freedesktop/Hal/devices/computer'
>  info.callouts.add = { 'hal-system-storage-cleanup-mountpoints' }
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', '', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = ' '
>  system.vendor = ''
>  smbios.chassis.manufacturer = ''
>  smbios.system.serial = ''
>  smbios.system.version = ''
>  smbios.system.product = ''
>  smbios.system.manufacturer = ''
>  smbios.bios.release_date = '11/05/2003'
>  smbios.bios.version = '6.00 PG'
>  smbios.bios.vendor = 'Phoenix Technologies, LTD'
>  power_management.can_suspend_to_disk = true
>  power_management.can_suspend_to_ram = false
>  power_management.acpi.linux.version = '20050902'
>  power_management.type = 'acpi'
>  system.formfactor = 'unknown'
>  system.kernel.machine = 'x86_64'
>  system.kernel.version = '2.6.16-rc1-git3-7-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>----- /proc/nvram -----
>  Checksum status: valid
>  # floppies     : 1
>  Floppy 0 type  : 3.5'' 1.44M
>  Floppy 1 type  : none
>  HD 0 type      : none
>  HD 1 type      : none
>  HD type 48 data: 0/0/0 C/H/S, precomp 65535, lz 0
>  HD type 49 data: 65463/251/178 C/H/S, precomp 25188, lz 4022
>  DOS base memory: 640 kB
>  Extended memory: 65472 kB (configured), 65472 kB (tested)
>  Gfx adapter    : EGA, VGA, ... (with BIOS)
>  FPU            : installed
>----- /proc/nvram end -----
>>> floppy.2: nvram info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 1 disks
>  bios: 638k low mem
>/dev/mem[0x9f800, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9f800, 2048]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00800 bytes at 0x9f800
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf0be0 - 0xf0bfe -----
>  f0be0  5f 53 4d 5f 2e 1f 02 02 51 00 00 00 00 00 00 00  "_SM_....Q......."
>  f0bf0  5f 44 4d 49 5f bd 56 03 00 00 0f 00 21 00 22  "_DMI_.V.....!.""
>----- SMBIOS Entry Point end -----
>/dev/mem[0xf0000, 854]: mmap(, 4096,,,, 0xf0000) ok
>----- SMBIOS Structure Table 0xf0000 - 0xf0355 -----
>  f0000  00 13 00 00 01 02 00 e0 03 03 90 9e cb 7f 00 00  "................"
>  f0010  00 00 37 50 68 6f 65 6e 69 78 20 54 65 63 68 6e  "..7Phoenix Techn"
>  f0020  6f 6c 6f 67 69 65 73 2c 20 4c 54 44 00 36 2e 30  "ologies, LTD.6.0"
>  f0030  30 20 50 47 00 31 31 2f 30 35 2f 32 30 30 33 00  "0 PG.11/05/2003."
>  f0040  00 01 19 01 00 01 02 03 04 ff ff ff ff ff ff ff  "................"
>  f0050  ff ff ff ff ff ff ff ff ff 06 20 00 20 00 20 00  ".......... . . ."
>  f0060  20 00 00 02 08 02 00 01 02 03 04 20 00 53 69 53  " .......... .SiS"
>  f0070  2d 37 35 35 00 20 00 20 00 00 03 0d 03 00 01 03  "-755. . ........"
>  f0080  02 03 04 02 02 02 02 20 00 20 00 20 00 20 00 00  "....... . . . .."
>  f0090  04 20 04 00 01 03 18 02 c0 0f 00 00 ff fb 8b 07  ". .............."
>  f00a0  03 a1 c8 00 dc 05 d0 07 41 04 08 00 09 00 ff ff  "........A......."
>  f00b0  53 6f 63 6b 65 74 20 41 00 41 4d 44 00 41 4d 44  "Socket A.AMD.AMD"
>  f00c0  20 41 74 68 6c 6f 6e 28 74 6d 29 20 36 34 20 50  " Athlon(tm) 64 P"
>  f00d0  72 6f 63 65 73 73 6f 72 20 33 30 30 30 2b 00 00  "rocessor 3000+.."
>  f00e0  05 14 05 00 06 04 03 03 0b 0c 00 14 00 01 02 06  "................"
>  f00f0  00 07 00 00 00 00 06 0c 06 00 01 ff 0a 01 00 7f  "................"
>  f0100  7f 00 41 30 00 00 06 0c 07 00 01 23 0a 01 00 89  "..A0.......#...."
>  f0110  89 00 41 31 00 00 07 13 08 00 01 80 01 80 00 80  "..A1............"
>  f0120  00 20 00 20 00 00 02 02 02 49 6e 74 65 72 6e 61  ". . .....Interna"
>  f0130  6c 20 43 61 63 68 65 00 00 07 13 09 00 01 81 01  "l Cache........."
>  f0140  00 02 00 02 20 00 20 00 00 02 02 02 45 78 74 65  ".... . .....Exte"
>  f0150  72 6e 61 6c 20 43 61 63 68 65 00 00 08 09 0a 00  "rnal Cache......"
>  f0160  01 16 00 00 ff 50 52 49 4d 41 52 59 20 49 44 45  ".....PRIMARY IDE"
>  f0170  00 00 08 09 0b 00 01 16 00 00 ff 53 45 43 4f 4e  "...........SECON"
>  f0180  44 41 52 59 20 49 44 45 00 00 08 09 0c 00 01 17  "DARY IDE........"
>  f0190  00 00 a1 46 44 44 00 00 08 09 0d 00 01 18 02 08  "...FDD.........."
>  f01a0  07 43 4f 4d 31 00 20 00 00 08 09 0e 00 01 18 02  ".COM1. ........."
>  f01b0  08 07 43 4f 4d 32 00 20 00 00 08 09 0f 00 01 05  "..COM2. ........"
>  f01c0  02 05 05 4c 50 54 31 00 20 00 00 08 09 10 00 01  "...LPT1. ......."
>  f01d0  0f 02 0f 0d 4b 65 79 62 6f 61 72 64 00 20 00 00  "....Keyboard. .."
>  f01e0  08 09 11 00 01 0f 02 0f 0e 50 53 2f 32 20 4d 6f  ".........PS/2 Mo"
>  f01f0  75 73 65 00 20 00 00 08 09 12 00 00 00 01 ff 10  "use. ..........."
>  f0200  55 53 42 30 00 00 09 0d 13 00 01 06 05 03 04 01  "USB0............"
>  f0210  00 02 01 50 43 49 30 00 00 09 0d 14 00 01 06 05  "...PCI0........."
>  f0220  04 04 02 00 02 01 50 43 49 31 00 00 09 0d 15 00  "......PCI1......"
>  f0230  01 06 05 03 04 03 00 02 01 50 43 49 32 00 00 09  ".........PCI2..."
>  f0240  0d 16 00 01 06 05 03 04 04 00 02 01 50 43 49 33  "............PCI3"
>  f0250  00 00 09 0d 17 00 01 0f 05 03 04 08 00 02 00 41  "...............A"
>  f0260  47 50 00 00 0d 16 18 00 03 00 00 00 00 00 00 00  "GP.............."
>  f0270  00 00 00 00 00 00 00 00 00 01 6e 7c 55 53 7c 69  "..........n|US|i"
>  f0280  73 6f 38 38 35 39 2d 31 00 6e 7c 55 53 7c 69 73  "so8859-1.n|US|is"
>  f0290  6f 38 38 35 39 2d 31 00 72 7c 43 41 7c 69 73 6f  "o8859-1.r|CA|iso"
>  f02a0  38 38 35 39 2d 31 00 61 7c 4a 50 7c 75 6e 69 63  "8859-1.a|JP|unic"
>  f02b0  6f 64 65 00 00 10 0f 19 00 03 03 03 00 00 20 00  "ode........... ."
>  f02c0  fe ff 02 00 00 00 11 15 1a 00 19 00 fe ff ff ff  "................"
>  f02d0  ff ff 00 00 09 00 01 02 02 00 00 41 30 00 42 61  "...........A0.Ba"
>  f02e0  6e 6b 30 2f 31 00 00 11 15 1b 00 19 00 fe ff ff  "nk0/1..........."
>  f02f0  ff ff ff 00 02 09 00 01 02 02 00 00 41 31 00 42  "............A1.B"
>  f0300  61 6e 6b 32 2f 33 00 00 13 0f 1c 00 00 00 00 00  "ank2/3.........."
>  f0310  ff ff 07 00 19 00 01 00 00 14 13 1d 00 00 00 00  "................"
>  f0320  00 00 00 00 00 1a 00 1c 00 01 00 00 00 00 14 13  "................"
>  f0330  1e 00 00 00 00 00 ff ff 07 00 1b 00 1c 00 01 00  "................"
>  f0340  00 00 00 20 0b 1f 00 00 00 00 00 00 00 00 00 00  "... ............"
>  f0350  7f 04 20 00 00 00  ".. ..."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 13 00 00 01 02 00 e0 03 03 90 9e cb 7f 00 00 00 00 37
>       str1: "Phoenix Technologies, LTD"
>       str2: "6.00 PG"
>       str3: "11/05/2003"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 06
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str2: "SiS-755"
>  type 0x03 [0x0003]: 03 0d 03 00 01 03 02 03 04 02 02 02 02
>  type 0x04 [0x0004]: 04 20 04 00 01 03 18 02 c0 0f 00 00 ff fb 8b 07 03 a1 c8 00 dc 05 d0 07 41 04 08 00 09 00 ff ff
>       str1: "Socket A"
>       str2: "AMD"
>       str3: "AMD Athlon(tm) 64 Processor 3000+"
>  type 0x05 [0x0005]: 05 14 05 00 06 04 03 03 0b 0c 00 14 00 01 02 06 00 07 00 00
>  type 0x06 [0x0006]: 06 0c 06 00 01 ff 0a 01 00 7f 7f 00
>       str1: "A0"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 0a 01 00 89 89 00
>       str1: "A1"
>  type 0x07 [0x0008]: 07 13 08 00 01 80 01 80 00 80 00 20 00 20 00 00 02 02 02
>       str1: "Internal Cache"
>  type 0x07 [0x0009]: 07 13 09 00 01 81 01 00 02 00 02 20 00 20 00 00 02 02 02
>       str1: "External Cache"
>  type 0x08 [0x000a]: 08 09 0a 00 01 16 00 00 ff
>       str1: "PRIMARY IDE"
>  type 0x08 [0x000b]: 08 09 0b 00 01 16 00 00 ff
>       str1: "SECONDARY IDE"
>  type 0x08 [0x000c]: 08 09 0c 00 01 17 00 00 a1
>       str1: "FDD"
>  type 0x08 [0x000d]: 08 09 0d 00 01 18 02 08 07
>       str1: "COM1"
>  type 0x08 [0x000e]: 08 09 0e 00 01 18 02 08 07
>       str1: "COM2"
>  type 0x08 [0x000f]: 08 09 0f 00 01 05 02 05 05
>       str1: "LPT1"
>  type 0x08 [0x0010]: 08 09 10 00 01 0f 02 0f 0d
>       str1: "Keyboard"
>  type 0x08 [0x0011]: 08 09 11 00 01 0f 02 0f 0e
>       str1: "PS/2 Mouse"
>  type 0x08 [0x0012]: 08 09 12 00 00 00 01 ff 10
>       str1: "USB0"
>  type 0x09 [0x0013]: 09 0d 13 00 01 06 05 03 04 01 00 02 01
>       str1: "PCI0"
>  type 0x09 [0x0014]: 09 0d 14 00 01 06 05 04 04 02 00 02 01
>       str1: "PCI1"
>  type 0x09 [0x0015]: 09 0d 15 00 01 06 05 03 04 03 00 02 01
>       str1: "PCI2"
>  type 0x09 [0x0016]: 09 0d 16 00 01 06 05 03 04 04 00 02 01
>       str1: "PCI3"
>  type 0x09 [0x0017]: 09 0d 17 00 01 0f 05 03 04 08 00 02 00
>       str1: "AGP"
>  type 0x0d [0x0018]: 0d 16 18 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
>       str1: "n|US|iso8859-1"
>       str2: "n|US|iso8859-1"
>       str3: "r|CA|iso8859-1"
>       str4: "a|JP|unicode"
>  type 0x10 [0x0019]: 10 0f 19 00 03 03 03 00 00 20 00 fe ff 02 00
>  type 0x11 [0x001a]: 11 15 1a 00 19 00 fe ff ff ff ff ff 00 00 09 00 01 02 02 00 00
>       str1: "A0"
>       str2: "Bank0/1"
>  type 0x11 [0x001b]: 11 15 1b 00 19 00 fe ff ff ff ff ff 00 02 09 00 01 02 02 00 00
>       str1: "A1"
>       str2: "Bank2/3"
>  type 0x13 [0x001c]: 13 0f 1c 00 00 00 00 00 ff ff 07 00 19 00 01
>  type 0x14 [0x001d]: 14 13 1d 00 00 00 00 00 00 00 00 00 1a 00 1c 00 01 00 00
>  type 0x14 [0x001e]: 14 13 1e 00 00 00 00 00 ff ff 07 00 1b 00 1c 00 01 00 00
>  type 0x20 [0x001f]: 20 0b 1f 00 00 00 00 00 00 00 00
>  type 0x7f [0x0020]: 7f 04 20 00
>  smbios: stopped at end tag
>>> bios.3: smp
>  smp: valid MP FP at 0xf5820 (size 0x10, rev 4), MP config at 0xf0c00
>/dev/mem[0xf0c00, 65536]: mmap(, 69632,,,, 0xf0000) ok
>  base MP config table (27 entries):
>  type 0, len 20
>    00 00 11 03 c0 0f 00 00 ff fb 00 00 00 00 00 00 00 00 00 00  "...................."
>  type 1, len 8
>    01 00 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 01 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 02 49 53 41 20 20 20  "..ISA   "
>  type 2, len 8
>    02 02 11 01 00 00 c0 fe  "........"
>  type 3, len 8
>    03 00 0f 00 00 0c 02 14  "........"
>  type 3, len 8
>    03 00 0f 00 00 0d 02 15  "........"
>  type 3, len 8
>    03 00 0f 00 00 0e 02 16  "........"
>  type 3, len 8
>    03 00 0f 00 00 0f 02 17  "........"
>  type 3, len 8
>    03 00 0f 00 00 0a 02 12  "........"
>  type 3, len 8
>    03 00 0f 00 01 00 02 10  "........"
>  type 3, len 8
>    03 00 0f 00 00 10 02 13  "........"
>  type 3, len 8
>    03 00 0f 00 00 28 02 12  ".....(.."
>  type 3, len 8
>    03 00 0f 00 00 14 02 11  "........"
>  type 3, len 8
>    03 03 00 00 02 00 02 00  "........"
>  type 3, len 8
>    03 00 00 00 02 01 02 01  "........"
>  type 3, len 8
>    03 00 00 00 02 00 02 02  "........"
>  type 3, len 8
>    03 00 00 00 02 04 02 04  "........"
>  type 3, len 8
>    03 00 00 00 02 06 02 06  "........"
>  type 3, len 8
>    03 00 00 00 02 07 02 07  "........"
>  type 3, len 8
>    03 00 05 00 02 08 02 08  "........"
>  type 3, len 8
>    03 00 00 00 02 0c 02 0c  "........"
>  type 3, len 8
>    03 00 00 00 02 0d 02 0d  "........"
>  type 3, len 8
>    03 00 00 00 02 0e 02 0e  "........"
>  type 3, len 8
>    03 00 00 00 02 0f 02 0f  "........"
>  type 4, len 8
>    04 03 00 00 00 00 ff 00  "........"
>  type 4, len 8
>    04 01 00 00 00 00 ff 01  "........"
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 00 00 00 00 00 00 78 03 00 00 00 00 80 9f  "........x......."
>  410  27 42 00 7e 02 00 00 20 00 00 22 00 22 00 e0 50  "'B.~... .."."..P"
>  420  0d 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  21 00 c0 00 01 00 00 00 4d 44 a0 00 ff ff 00 00  "!.......MD......"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 60 01 00 d8 ff f3 4c 14 00  ".....)0`.....L.."
>  470  00 00 00 00 01 01 00 00 14 14 14 14 01 01 01 01  "................"
>  480  1e 00 3e 00 3f 10 00 60 09 11 0b 81 00 00 00 03  "..>.?..`........"
>  490  07 07 00 00 00 00 10 02 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 9a 0f 00 c0 00 6c 28 00 c0 10 05 01 00  "........l(......"
>  4b0  00 00 00 00 d1 00 04 00 00 00 04 00 00 00 00 00  "................"
>  4c0  00 0c e2 00 00 00 ff ff ff 00 00 00 00 00 00 00  "................"
>  4d0  00 10 00 00 00 00 00 00 dc 04 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 80 07 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9f800 - 0x9ffff -----
>  9f800  02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f810  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f820  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f830  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f840  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f850  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f860  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f870  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f880  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f890  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f900  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f910  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f920  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f930  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f940  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f950  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f960  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f970  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f980  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f990  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9faa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fab0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fac0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fad0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fae0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9faf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fba0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc10  00 dc 02 e0 e0 00 0b 10 02 04 9f 2a 06 00 11 61  "...........*...a"
>  9fc20  03 41 ff a0 3f 00 00 00 08 ff 3f 10 fe ff 3f 4c  ".A..?.....?...?L"
>  9fc30  10 00 01 00 00 0d 00 30 00 00 00 00 00 00 00 00  ".......0........"
>  9fc40  02 01 00 28 00 00 00 00 04 00 00 02 00 00 10 00  "...(............"
>  9fc50  0d 00 30 00 00 00 00 0c 00 00 00 00 00 00 00 00  "..0............."
>  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc80  28 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  "(..............."
>  9fc90  00 00 e0 50 00 00 00 00 00 00 00 00 04 00 00 00  "...P............"
>  9fca0  00 00 00 00 00 01 00 00 00 e0 25 00 00 00 00 40  "..........%....@"
>  9fcb0  00 c0 9f 04 28 28 00 00 00 00 00 01 00 00 02 00  "....((.........."
>  9fcc0  00 00 0d 00 30 00 02 28 00 00 00 ec b8 8d 00 00  "....0..(........"
>  9fcd0  00 02 00 00 00 0d 00 00 00 30 00 00 10 00 00 00  ".........0......"
>  9fce0  00 0d 03 00 00 02 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd60  00 00 00 00 00 0d 03 00 00 02 00 80 00 00 00 00  "................"
>  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 30 d4 8f  ".............0.."
>  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fea0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff90  00 00 00 00 00 00 04 00 1a 55 04 00 05 17 1a 55  ".........U.....U"
>  9ffa0  02 0e 1a 55 44 03 8e 16 44 03 7f 33 7a bf 02 02  "...UD...D..3z..."
>  9ffb0  b2 1d 44 04 8e 16 44 03 9e 33 7a bf 46 02 e0 1c  "..D...D..3z.F..."
>  9ffc0  46 02 0e 01 44 4e 20 30 9e 33 fa 1f 5e 20 03 00  "F...DN 0.3..^ .."
>  9ffd0  00 00 05 00 9c 8f 00 00 9c 20 00 00 c0 bf 07 00  "......... ......"
>  9ffe0  00 00 00 00 7a ff 00 00 d8 99 3c 20 fa 1f ee 76  "....z.....< ...v"
>  9fff0  03 00 05 00 00 00 1a 55 00 00 04 00 ba 8f 55 aa  ".......U......U."
>----- EBDA end -----
>/dev/mem[0xf5820, 16]: mmap(, 4096,,,, 0xf5000) ok
>----- MP FP 0xf5820 - 0xf582f -----
>  f5820  5f 4d 50 5f 00 0c 0f 00 01 04 85 00 00 00 00 00  "_MP_............"
>----- MP FP end -----
>/dev/mem[0xf0c00, 272]: mmap(, 4096,,,, 0xf0000) ok
>----- MP config table 0xf0c00 - 0xf0d0f -----
>  f0c00  50 43 4d 50 10 01 04 df 4f 45 4d 30 30 30 30 30  "PCMP....OEM00000"
>  f0c10  50 52 4f 44 30 30 30 30 30 30 30 30 00 00 00 00  "PROD00000000...."
>  f0c20  00 00 1b 00 00 00 e0 fe 00 00 00 00 00 00 11 03  "................"
>  f0c30  c0 0f 00 00 ff fb 00 00 00 00 00 00 00 00 00 00  "................"
>  f0c40  01 00 50 43 49 20 20 20 01 01 50 43 49 20 20 20  "..PCI   ..PCI   "
>  f0c50  01 02 49 53 41 20 20 20 02 02 11 01 00 00 c0 fe  "..ISA   ........"
>  f0c60  03 00 0f 00 00 0c 02 14 03 00 0f 00 00 0d 02 15  "................"
>  f0c70  03 00 0f 00 00 0e 02 16 03 00 0f 00 00 0f 02 17  "................"
>  f0c80  03 00 0f 00 00 0a 02 12 03 00 0f 00 01 00 02 10  "................"
>  f0c90  03 00 0f 00 00 10 02 13 03 00 0f 00 00 28 02 12  ".............(.."
>  f0ca0  03 00 0f 00 00 14 02 11 03 03 00 00 02 00 02 00  "................"
>  f0cb0  03 00 00 00 02 01 02 01 03 00 00 00 02 00 02 02  "................"
>  f0cc0  03 00 00 00 02 04 02 04 03 00 00 00 02 06 02 06  "................"
>  f0cd0  03 00 00 00 02 07 02 07 03 00 05 00 02 08 02 08  "................"
>  f0ce0  03 00 00 00 02 0c 02 0c 03 00 00 00 02 0d 02 0d  "................"
>  f0cf0  03 00 00 00 02 0e 02 0e 03 00 00 00 02 0f 02 0f  "................"
>  f0d00  04 03 00 00 00 00 ff 00 04 01 00 00 00 00 ff 01  "................"
>----- MP config table end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 61952]: mmap(, 65536,,,, 0xc0000) ok
>vbe: BIOS chksum wrong
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:0f9a: 52 50 ba ca 03 ec 3c ff
>>> bios.4.1: vbe info
>vm86: using CPU emulation
>>> bios.5: 32
>  bios32: valid SD header at 0xfb040 (size 0x10, rev 0), SD at 0xfb4c0
>>> sys.1: cpu
>>> misc.9: kernel log
>----- kernel log -----
>  <4>Bootdata ok (command line is BOOT_IMAGE=linux initrd=initrd,12801024.spl splash=silent vga=0x31a)
>  <5>Linux version 2.6.16-rc1-git3-7-default (geeko@buildhost) (gcc version 4.1.0 20060123 (prerelease) (SUSE Linux)) #1 Mon Jan 30 21:52:12 UTC 2006
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>  <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
>  <4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
>  <4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
>  <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>  <7>ACPI: RSDP (v000 AWARD                                 ) @ 0x00000000000f7180
>  <7>ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3000
>  <7>ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3040
>  <7>ACPI: MADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff6b80
>  <7>ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>  <7>On node 0 totalpages: 128320
>  <7>  DMA zone: 3095 pages, LIFO batch:0
>  <7>  DMA32 zone: 125225 pages, LIFO batch:31
>  <7>  Normal zone: 0 pages, LIFO batch:0
>  <7>  HighMem zone: 0 pages, LIFO batch:0
>  <6>ACPI: PM-Timer IO Port: 0x1008
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>  <6>Processor #0 15:12 APIC version 16
>  <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>  <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>  <6>IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>  <7>ACPI: IRQ0 used by override.
>  <7>ACPI: IRQ2 used by override.
>  <7>ACPI: IRQ9 used by override.
>  <6>Setting APIC routing to flat
>  <6>Using ACPI (MADT) for SMP configuration information
>  <6>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>  <4>Checking aperture...
>  <4>CPU 0: aperture @ e0000000 size 128 MB
>  <4>Built 1 zonelists
>  <5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,12801024.spl splash=silent vga=0x31a
>  <6>bootsplash: silent mode.
>  <4>Initializing CPU#0
>  <4>PID hash table entries: 2048 (order: 11, 65536 bytes)
>  <6>time.c: Using 3.579545 MHz PM timer.
>  <6>time.c: Detected 1999.476 MHz processor.
>  <6>time.c: Using PIT/TSC based timekeeping.
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>  <4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>  <6>PCI-DMA: Disabling IOMMU.
>  <4>Memory: 503872k/524224k available (1804k kernel code, 19528k reserved, 787k data, 168k init)
>  <4>Calibrating delay using timer specific routine.. 4003.19 BogoMIPS (lpj=8006388)
>  <6>Security Framework v1.0.0 initialized
>  <4>Mount-cache hash table entries: 256
>  <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>  <6>CPU: L2 Cache: 512K (64 bytes/line)
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
>  <6>checking if image is initramfs... it is
>  <4>Freeing initrd memory: 8101k freed
>  <4> not found!
>  <6>Using local APIC timer interrupts.
>  <6>Detected 12.496 MHz APIC timer.
>  <6>testing NMI watchdog ... OK.
>  <6>DMI 2.2 present.
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050902
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using IOAPIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <7>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>  <7>Boot video device is 0000:01:00.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>agpgart: Detected AGP bridge 0
>  <6>agpgart: AGP aperture is 128M @ 0xe0000000
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: disabled.
>  <6>  MEM window: e8000000-eaffffff
>  <6>  PREFETCH window: d0000000-dfffffff
>  <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>  <6>audit: initializing netlink socket (disabled)
>  <5>audit(1140207484.068:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000100000, using 10240k, total 131072k
>  <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 84216 bytes,<6>...found (1280x1024, 41888 bytes, v3).
>  <4>Console: switching to colour frame buffer device 93x57
>  <6>fb0: VESA VGA frame buffer device
>  <6>Real Time Clock Driver v1.12ac
>  <6>Non-volatile memory driver v1.2
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>  <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: AT Translated Set 2 keyboard as /class/input/input0
>  <6>input: PC Speaker as /class/input/input1
>  <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 4.39
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>  <4>TCP established hash table entries: 16384 (order: 6, 393216 bytes)
>  <4>TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
>  <6>TCP: Hash tables configured (established 16384 bind 16384)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>ACPI wakeup devices: 
>  <4>FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2K 
>  <6>ACPI: (supports S0 S1 S4 S5)
>  <4>Freeing unused kernel memory: 168k freed
>  <4>Write protecting the kernel read-only data: 338k
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <5>SCSI subsystem initialized
>  <6>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <6>NET: Registered protocol family 17
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a post-1991 82077
>  <6>loop: loaded (max 8 devices)
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>SIS5513: IDE controller at PCI slot 0000:00:02.5
>  <6>SIS5513: chipset revision 1
>  <6>SIS5513: not 100% native mode: will probe irqs later
>  <6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>  <6>    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: AOPEN DUW1608/ARR, ATAPI CD/DVD-ROM drive
>  <4>hdb: MATSHITA CR-583, ATAPI CD/DVD-ROM drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <6>hdb: ATAPI 8X CD-ROM drive, 128kB Cache, DMA
>  <7>Probing IDE interface ide1...
>  <6>SIS5513: IDE controller at PCI slot 0000:00:05.0
>  <4>    ACPI-0201: *** Warning: Device is not power manageable
>  <6>GSI 16 sharing vector 0xA9 and IRQ 16
>  <6>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 169
>  <6>SIS5513: chipset revision 1
>  <6>SIS5513: SiS 965 IDE UDMA133 controller
>  <6>SIS5513: 100% native mode on irq 169
>  <6>SIS5513: neither IDE port enabled (BIOS)
>  <7>libata version 1.20 loaded.
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <4>    ACPI-0201: *** Warning: Device is not power manageable
>  <6>GSI 17 sharing vector 0xB1 and IRQ 17
>  <6>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 177
>  <6>ehci_hcd 0000:00:03.3: EHCI Host Controller
>  <7>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>  <6>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>  <6>ehci_hcd 0000:00:03.3: irq 177, io mem 0xec002000
>  <6>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>  <6>usb usb1: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb1: Product: EHCI Host Controller
>  <6>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-7-default ehci_hcd
>  <6>usb usb1: SerialNumber: 0000:00:03.3
>  <6>usb usb1: configuration #1 chosen from 1 choice
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 8 ports detected
>  <6>usbcore: registered new driver hiddev
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>  <7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>  <6>GSI 18 sharing vector 0xB9 and IRQ 18
>  <6>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 185
>  <6>ohci_hcd 0000:00:03.0: OHCI Host Controller
>  <6>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>  <6>ohci_hcd 0000:00:03.0: irq 185, io mem 0xec004000
>  <6>usb usb2: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb2: Product: OHCI Host Controller
>  <6>usb usb2: Manufacturer: Linux 2.6.16-rc1-git3-7-default ohci_hcd
>  <6>usb usb2: SerialNumber: 0000:00:03.0
>  <6>usb usb2: configuration #1 chosen from 1 choice
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 3 ports detected
>  <6>GSI 19 sharing vector 0xC1 and IRQ 19
>  <6>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 193
>  <6>ohci_hcd 0000:00:03.1: OHCI Host Controller
>  <6>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>  <6>ohci_hcd 0000:00:03.1: irq 193, io mem 0xec000000
>  <6>usb usb3: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb3: Product: OHCI Host Controller
>  <6>usb usb3: Manufacturer: Linux 2.6.16-rc1-git3-7-default ohci_hcd
>  <6>usb usb3: SerialNumber: 0000:00:03.1
>  <6>usb usb3: configuration #1 chosen from 1 choice
>  <6>hub 3-0:1.0: USB hub found
>  <6>hub 3-0:1.0: 3 ports detected
>  <6>GSI 20 sharing vector 0xC9 and IRQ 20
>  <6>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 201
>  <6>ohci_hcd 0000:00:03.2: OHCI Host Controller
>  <6>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>  <6>ohci_hcd 0000:00:03.2: irq 201, io mem 0xec001000
>  <6>usb usb4: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb4: Product: OHCI Host Controller
>  <6>usb usb4: Manufacturer: Linux 2.6.16-rc1-git3-7-default ohci_hcd
>  <6>usb usb4: SerialNumber: 0000:00:03.2
>  <6>usb usb4: configuration #1 chosen from 1 choice
>  <6>hub 4-0:1.0: USB hub found
>  <6>hub 4-0:1.0: 2 ports detected
>  <6>usb 2-1: new low speed USB device using ohci_hcd and address 2
>  <6>usb 2-1: new device found, idVendor=046d, idProduct=c215
>  <6>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>  <6>usb 2-1: Product: Logitech Extreme 3D
>  <6>usb 2-1: Manufacturer: Logitech
>  <6>usb 2-1: configuration #1 chosen from 1 choice
>  <6>Initializing USB Mass Storage driver...
>  <3>drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
>  <4>drivers/usb/input/hid-core.c: timeout initializing reports
>  <4>
>  <6>input: Logitech Logitech Extreme 3D as /class/input/input2
>  <6>input: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:00:03.0-1
>  <6>usb 2-2: new low speed USB device using ohci_hcd and address 3
>  <6>usb 2-2: new device found, idVendor=056e, idProduct=0033
>  <6>usb 2-2: new device strings: Mfr=3, Product=2, SerialNumber=0
>  <6>usb 2-2: Product: ELECOM USB mouse with wheel 
>  <6>usb 2-2: Manufacturer: ELECOM
>  <6>usb 2-2: configuration #1 chosen from 1 choice
>  <6>input: ELECOM ELECOM USB mouse with wheel  as /class/input/input3
>  <6>input: USB HID v1.10 Mouse [ELECOM ELECOM USB mouse with wheel ] on usb-0000:00:03.0-2
>  <6>usb 4-1: new full speed USB device using ohci_hcd and address 2
>  <6>usb 4-1: new device found, idVendor=0c45, idProduct=6025
>  <6>usb 4-1: new device strings: Mfr=0, Product=1, SerialNumber=0
>  <6>usb 4-1: Product: USB camera
>  <6>usb 4-1: configuration #1 chosen from 1 choice
>  <6>usbcore: registered new driver usb-storage
>  <6>USB Mass Storage support registered.
>  <6>ACPI: Thermal Zone [THRM] (40 C)
>  <6>ACPI: Fan [FAN] (on)
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>  <7>dm-netlink version 0.0.2 loaded
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>  <4>ppa: Version 2.07 (for Linux 2.4.x)
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>md: raid0 personality registered for level 0
>  <6>md: raid1 personality registered for level 1
>  <6>raid5: automatically using best checksumming function: generic_sse
>  <4>   generic_sse:  6135.000 MB/sec
>  <4>raid5: using function: generic_sse (6135.000 MB/sec)
>  <6>md: raid5 personality registered for level 5
>  <6>md: raid4 personality registered for level 4
>  <4>raid6: int64x1   1778 MB/s
>  <4>raid6: int64x2   2267 MB/s
>  <4>raid6: int64x4   2285 MB/s
>  <4>raid6: int64x8   1601 MB/s
>  <4>raid6: sse2x1    2555 MB/s
>  <4>raid6: sse2x2    3424 MB/s
>  <4>raid6: sse2x4    3664 MB/s
>  <4>raid6: using algorithm sse2x4 (3664 MB/s)
>  <6>md: raid6 personality registered for level 6
>  <6>md: multipath personality registered for level -4
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc io=0x378 irq=none,none,none" -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: 512 bytes (5s, 0us)
>floppy ioctl(geo) ok
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  01f0-01f7 : ide0
>  0378-037a : parport0
>  03c0-03df : vesafb
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  03f8-03ff : serial
>  0cf8-0cff : PCI conf1
>  1000-1003 : PM1a_EVT_BLK
>  1004-1005 : PM1a_CNT_BLK
>  1008-100b : PM_TMR
>  1016-1016 : PM2_CNT_BLK
>  1020-1023 : GPE0_BLK
>  1030-1033 : GPE1_BLK
>  4000-400f : 0000:00:02.5
>    4000-4007 : ide0
>    4008-400f : ide1
>  d000-d0ff : 0000:00:02.7
>  d400-d47f : 0000:00:02.7
>  d800-d8ff : 0000:00:04.0
>  dc00-dc07 : 0000:00:05.0
>  e000-e003 : 0000:00:05.0
>  e400-e407 : 0000:00:05.0
>  e800-e803 : 0000:00:05.0
>  ec00-ec0f : 0000:00:05.0
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:      70324    IO-APIC-edge  timer
>    1:        262    IO-APIC-edge  i8042
>    4:         38    IO-APIC-edge  serial
>    6:         28    IO-APIC-edge  floppy
>    8:          0    IO-APIC-edge  rtc
>    9:          0   IO-APIC-level  acpi
>   14:       3877    IO-APIC-edge  ide0
>  177:          4   IO-APIC-level  ehci_hcd:usb1
>  185:       1004   IO-APIC-level  ohci_hcd:usb2
>  193:          0   IO-APIC-level  ohci_hcd:usb3
>  201:         18   IO-APIC-level  ohci_hcd:usb4
>  NMI:         68 
>  LOC:      70107 
>  ERR:          0
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 15
>  model		: 12
>  model name	: AMD Athlon(tm) 64 Processor 3000+
>  stepping	: 0
>  cpu MHz		: 1999.476
>  cache size	: 512 KB
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
>  bogomips	: 4003.19
>  TLB size	: 1024 4K pages
>  clflush size	: 64
>  cache_alignment	: 64
>  address sizes	: 40 bits physical, 48 bits virtual
>  power management: ts fid vid ttp
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x1fff0000
>  klog mem 0: 0x0
>  klog mem 1: 0x0
>  klog mem:   0x0
> -- <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> -- <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> -- <4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> -- <4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> -- <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> -- <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> -- <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> -- <7>ACPI: RSDP (v000 AWARD                                 ) @ 0x00000000000f7180
>  bios mem:   0x1ff8f800
>  meminfo:    0x1f491000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xcba5d50d81c8c641) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:02.5/ide0/0.0
>       ide-cdrom: /devices/pci0000:00/0000:00:02.5/ide0/0.1
>       ide-cdrom: /module/ide_cd
>        ide-disk: /module/ide_disk
>         SIS_IDE: /devices/pci0000:00/0000:00:02.5
>         SIS_IDE: /devices/pci0000:00/0000:00:05.0
>         SIS_IDE: /module/sis5513
>   agpgart-amd64: /devices/pci0000:00/0000:00:00.0
>        ehci_hcd: /devices/pci0000:00/0000:00:03.3
>        ehci_hcd: /module/ehci_hcd
>        ohci_hcd: /devices/pci0000:00/0000:00:03.0
>        ohci_hcd: /devices/pci0000:00/0000:00:03.1
>        ohci_hcd: /devices/pci0000:00/0000:00:03.2
>        ohci_hcd: /module/ohci_hcd
>        sata_sis: /module/sata_sis
>           i8042: /devices/platform/i8042
>          pcspkr: /devices/platform/pcspkr
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>           atkbd: /devices/platform/i8042/serio1
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0
>             hub: /module/usbcore
>     usb-storage: /module/usb_storage
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0
>          usbhid: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:03.0/usb2/2-1
>             usb: /devices/pci0000:00/0000:00:03.0/usb2/2-2
>             usb: /devices/pci0000:00/0000:00:03.2/usb4/4-1
>             usb: /devices/pci0000:00/0000:00:03.3/usb1
>             usb: /devices/pci0000:00/0000:00:03.0/usb2
>             usb: /devices/pci0000:00/0000:00:03.1/usb3
>             usb: /devices/pci0000:00/0000:00:03.2/usb4
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00001039d00000755sv00001019sd00001891bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1039
>    device = 0x755
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 0
>    res[0] = 0xe0000000 0xe7ffffff 0x200
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v00001039d00000002sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x1039
>    device = 0x2
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci
>    path = /devices/pci0000:00/0000:00:02.0
>    modalias = "pci:v00001039d00000964sv00000000sd00000000bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x1039
>    device = 0x964
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:02.5, bus_id = 0000:00:02.5, bus = pci
>    path = /devices/pci0000:00/0000:00:02.5
>    modalias = "pci:v00001039d00005513sv00001019sd00001891bc01sc01i80
>"
>    class = 0x10180
>    vendor = 0x1039
>    device = 0x5513
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 0
>    res[4] = 0x4000 0x400f 0x101
>    config[64]
>  pci device: name = 0000:00:02.7, bus_id = 0000:00:02.7, bus = pci
>    path = /devices/pci0000:00/0000:00:02.7
>    modalias = "pci:v00001039d00007012sv00001019sd00001891bc04sc01i00
>"
>    class = 0x40100
>    vendor = 0x1039
>    device = 0x7012
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 10
>    res[0] = 0xd000 0xd0ff 0x101
>    res[1] = 0xd400 0xd47f 0x101
>    config[64]
>  pci device: name = 0000:00:03.0, bus_id = 0000:00:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:03.0
>    modalias = "pci:v00001039d00007001sv00001019sd00001891bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x1039
>    device = 0x7001
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 185
>    res[0] = 0xec004000 0xec004fff 0x200
>    config[64]
>  pci device: name = 0000:00:03.1, bus_id = 0000:00:03.1, bus = pci
>    path = /devices/pci0000:00/0000:00:03.1
>    modalias = "pci:v00001039d00007001sv00001019sd00001891bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x1039
>    device = 0x7001
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 193
>    res[0] = 0xec000000 0xec000fff 0x200
>    config[64]
>  pci device: name = 0000:00:03.2, bus_id = 0000:00:03.2, bus = pci
>    path = /devices/pci0000:00/0000:00:03.2
>    modalias = "pci:v00001039d00007001sv00001019sd00001891bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x1039
>    device = 0x7001
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 201
>    res[0] = 0xec001000 0xec001fff 0x200
>    config[64]
>  pci device: name = 0000:00:03.3, bus_id = 0000:00:03.3, bus = pci
>    path = /devices/pci0000:00/0000:00:03.3
>    modalias = "pci:v00001039d00007002sv00001019sd00001891bc0Csc03i20
>"
>    class = 0xc0320
>    vendor = 0x1039
>    device = 0x7002
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 177
>    res[0] = 0xec002000 0xec002fff 0x200
>    config[64]
>  pci device: name = 0000:00:04.0, bus_id = 0000:00:04.0, bus = pci
>    path = /devices/pci0000:00/0000:00:04.0
>    modalias = "pci:v00001039d00000900sv00001019sd00001891bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x1039
>    device = 0x900
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 5
>    res[0] = 0xd800 0xd8ff 0x101
>    res[1] = 0xec003000 0xec003fff 0x200
>    res[6] = 0x30000000 0x3001ffff 0x7200
>    config[64]
>  pci device: name = 0000:00:05.0, bus_id = 0000:00:05.0, bus = pci
>    path = /devices/pci0000:00/0000:00:05.0
>    modalias = "pci:v00001039d00000180sv00001019sd00001891bc01sc01i85
>"
>    class = 0x10185
>    vendor = 0x1039
>    device = 0x180
>    subvendor = 0x1019
>    subdevice = 0x1891
>    irq = 169
>    res[0] = 0xdc00 0xdc07 0x101
>    res[1] = 0xe000 0xe003 0x101
>    res[2] = 0xe400 0xe407 0x101
>    res[3] = 0xe800 0xe803 0x101
>    res[4] = 0xec00 0xec0f 0x101
>    config[64]
>  pci device: name = 0000:00:0a.0, bus_id = 0000:00:0a.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0a.0
>    modalias = "pci:v000017FEd00002120sv00001737sd00000020bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x17fe
>    device = 0x2120
>    subvendor = 0x1737
>    subdevice = 0x20
>    irq = 10
>    res[0] = 0xec005000 0xec0057ff 0x200
>    config[64]
>  pci device: name = 0000:00:18.0, bus_id = 0000:00:18.0, bus = pci
>    path = /devices/pci0000:00/0000:00:18.0
>    modalias = "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1100
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:18.1, bus_id = 0000:00:18.1, bus = pci
>    path = /devices/pci0000:00/0000:00:18.1
>    modalias = "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1101
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:18.2, bus_id = 0000:00:18.2, bus = pci
>    path = /devices/pci0000:00/0000:00:18.2
>    modalias = "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1102
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:18.3, bus_id = 0000:00:18.3, bus = pci
>    path = /devices/pci0000:00/0000:00:18.3
>    modalias = "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1103
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>    modalias = "pci:v000010DEd000000F1sv00001458sd00003150bc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x10de
>    device = 0xf1
>    subvendor = 0x1458
>    subdevice = 0x3150
>    irq = 3
>    res[0] = 0xe8000000 0xe8ffffff 0x200
>    res[1] = 0xd0000000 0xdfffffff 0x1208
>    res[2] = 0xe9000000 0xe9ffffff 0x200
>    res[6] = 0xea000000 0xea01ffff 0x7202
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1039:0755:1019:1891:01
>class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0
>  addr0 e0000000, size 08000000
>  00: 39 10 55 07 07 00 10 22 01 00 00 06 00 20 00 00  "9.U...."..... .."
>  10: 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 02 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 08 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  f0: 08 00  ".."
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 1039:0002:0000:0000:00
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 39 10 02 00 07 01 20 02 00 00 04 06 00 63 01 00  "9..... ......c.."
>  10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 20 62  "........... .. b"
>  20: 00 e8 f0 ea 00 d0 f0 df 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00  "................"
>
>bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 1039:0964:0000:0000:36
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 39 10 64 09 0f 00 00 02 36 00 01 06 00 00 80 00  "9.d.....6......."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 02, func 5, vend:dev:s_vend:s_dev:rev 1039:5513:1019:1891:01
>class 01, sub_class 01 prog_if 80, hdr 0, flags <>, irq 0
>  addr4 00004000, size 00000010
>  00: 39 10 13 55 05 00 00 02 01 80 01 01 00 80 00 00  "9..U............"
>  10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00  "................"
>  20: 01 40 00 00 00 00 00 00 00 00 00 00 19 10 91 18  ".@.............."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 02, func 7, vend:dev:s_vend:s_dev:rev 1039:7012:1019:1891:a0
>class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 0000d000, size 00000100
>  addr1 0000d400, size 00000080
>  00: 39 10 12 70 05 00 90 02 a0 00 01 04 00 20 00 00  "9..p......... .."
>  10: 01 d0 00 00 01 d4 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 03 34 0b  "....H.........4."
>  40: 00 00 00 00 00 00 00 00 01 00  ".........."
>
>bus 00, slot 03, func 0, vend:dev:s_vend:s_dev:rev 1039:7001:1019:1891:0f
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 185
>  addr0 ec004000, size 00001000
>  00: 39 10 01 70 07 00 80 82 0f 10 03 0c 08 20 80 00  "9..p......... .."
>  10: 00 40 00 ec 00 00 00 00 00 00 00 00 00 00 00 00  ".@.............."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 50  "...............P"
>
>bus 00, slot 03, func 1, vend:dev:s_vend:s_dev:rev 1039:7001:1019:1891:0f
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 193
>  addr0 ec000000, size 00001000
>  00: 39 10 01 70 07 00 80 82 0f 10 03 0c 08 20 00 00  "9..p......... .."
>  10: 00 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 50  "...............P"
>
>bus 00, slot 03, func 2, vend:dev:s_vend:s_dev:rev 1039:7001:1019:1891:0f
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 201
>  addr0 ec001000, size 00001000
>  00: 39 10 01 70 07 00 80 82 0f 10 03 0c 08 20 00 00  "9..p......... .."
>  10: 00 10 00 ec 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50  "...............P"
>
>bus 00, slot 03, func 3, vend:dev:s_vend:s_dev:rev 1039:7002:1019:1891:00
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 177
>  addr0 ec002000, size 00001000
>  00: 39 10 02 70 06 00 90 02 00 20 03 0c 00 20 00 00  "9..p..... ... .."
>  10: 00 20 00 ec 00 00 00 00 00 00 00 00 00 00 00 00  ". .............."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 09 04 00 50  "....P..........P"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00  ".."
>
>bus 00, slot 04, func 0, vend:dev:s_vend:s_dev:rev 1039:0900:1019:1891:91
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr0 0000d800, size 00000100
>  addr1 ec003000, size 00001000
>  00: 39 10 00 09 07 00 90 02 91 00 00 02 00 20 00 00  "9............ .."
>  10: 01 d8 00 00 00 30 00 ec 00 00 00 00 00 00 00 00  ".....0.........."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 34 0b  "....@.........4."
>  40: 01 00  ".."
>
>bus 00, slot 05, func 0, vend:dev:s_vend:s_dev:rev 1039:0180:1019:1891:01
>class 01, sub_class 01 prog_if 85, hdr 0, flags <pm>, irq 169
>  addr0 0000dc00, size 00000008
>  addr1 0000e000, size 00000004
>  addr2 0000e400, size 00000008
>  addr3 0000e800, size 00000004
>  addr4 0000ec00, size 00000010
>  00: 39 10 80 01 05 00 30 02 01 85 01 01 00 20 00 00  "9.....0...... .."
>  10: 01 dc 00 00 01 e0 00 00 01 e4 00 00 01 e8 00 00  "................"
>  20: 01 ec 00 00 01 00 00 00 00 00 00 00 19 10 91 18  "................"
>  30: 00 00 00 00 58 00 00 00 00 00 00 00 0b 01 00 00  "....X..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 01 00  ".........."
>
>bus 00, slot 0a, func 0, vend:dev:s_vend:s_dev:rev 17fe:2120:1737:0020:00
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 ec005000, size 00000800
>  00: fe 17 20 21 06 00 90 02 00 00 00 02 00 20 00 00  ".. !......... .."
>  10: 00 50 00 ec 00 00 00 00 00 00 00 00 00 00 00 00  ".P.............."
>  20: 00 00 00 00 00 00 00 00 01 04 00 00 37 17 20 00  "............7. ."
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 20 20  "....@.........  "
>  40: 01 00  ".."
>
>bus 00, slot 18, func 0, vend:dev:s_vend:s_dev:rev 1022:1100:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 08 00  ".."
>
>bus 00, slot 18, func 1, vend:dev:s_vend:s_dev:rev 1022:1101:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 18, func 2, vend:dev:s_vend:s_dev:rev 1022:1102:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 18, func 3, vend:dev:s_vend:s_dev:rev 1022:1103:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:00f1:1458:3150:a2
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 3
>  addr0 e8000000, size 01000000
>  addr1 d0000000, size 10000000
>  addr2 e9000000, size 01000000
>  00: de 10 f1 00 07 00 b0 02 a2 00 00 03 00 20 00 00  "............. .."
>  10: 00 00 00 e8 08 00 00 d0 00 00 00 e9 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 50 31  "............X.P1"
>  30: 00 00 00 00 60 00 00 00 00 00 00 00 03 01 05 01  "....`..........."
>  40: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 01 44  ".D"
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:87 rx:0
>  1: uart:unknown port:000002F8 irq:3
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x1000 - 0x1003 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x1004 - 0x1005 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x1008 - 0x100b (0x04) "PM_TMR"
>i/o:0 0x1016 - 0x1016 (0x01) "PM2_CNT_BLK"
>i/o:0 0x1020 - 0x1023 (0x04) "GPE0_BLK"
>i/o:0 0x1030 - 0x1033 (0x04) "GPE1_BLK"
>i/o:0 0x4000 - 0x400f (0x10) "0000:00:02.5"
>i/o:1 0x4000 - 0x4007 (0x08) "ide0"
>i/o:1 0x4008 - 0x400f (0x08) "ide1"
>i/o:0 0xd000 - 0xd0ff (0x100) "0000:00:02.7"
>i/o:0 0xd400 - 0xd47f (0x80) "0000:00:02.7"
>i/o:0 0xd800 - 0xd8ff (0x100) "0000:00:04.0"
>i/o:0 0xdc00 - 0xdc07 (0x08) "0000:00:05.0"
>i/o:0 0xe000 - 0xe003 (0x04) "0000:00:05.0"
>i/o:0 0xe400 - 0xe407 (0x08) "0000:00:05.0"
>i/o:0 0xe800 - 0xe803 (0x04) "0000:00:05.0"
>i/o:0 0xec00 - 0xec0f (0x10) "0000:00:05.0"
>irq:1  0 (    70324) "timer"
>irq:0  1 (      262) "i8042"
>irq:1  4 (       38) "serial"
>irq:1  6 (       28) "floppy"
>irq:1  8 (        0) "rtc"
>irq:0  9 (        0) "acpi"
>irq:1 14 (     3877) "ide0"
>irq:0 177 (        4) "ehci_hcd:usb1"
>irq:0 185 (     1004) "ohci_hcd:usb2"
>irq:0 193 (        0) "ohci_hcd:usb3"
>irq:0 201 (       18) "ohci_hcd:usb4"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>  FATAL: Module lp not found.
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	1912
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hdb	hda
>drive speed:		8	48
>drive # of slots:	1	1
>Can close tray:		1	1
>Can open tray:		1	1
>Can lock tray:		1	1
>Can change speed:	1	1
>Can select disk:	0	0
>Can read multisession:	1	1
>Can read MCN:		1	1
>Reports media changed:	1	1
>Can play audio:		1	1
>Can write CD-R:		0	1
>Can write CD-RW:	0	1
>Can read DVD:		0	1
>Can write DVD-R:	0	1
>Can write DVD-RAM:	0	0
>Can read MRW:		1	1
>Can write MRW:		1	1
>Can write RAM:		0	1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     7     0      73804 loop0
>----- /proc/partitions end -----
>disks:
>partitions:
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:02.5/ide0/0.0
>  ide: bus_id = 0.1 path = /devices/pci0000:00/0000:00:02.5/ide0/0.1
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 1
>    block device: bus = ide, bus_id = 0.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:02.5/ide0/0.0
>  hda: el torito boot catalog at 0x00e1
>    media type: 0
>    load address: 0x0000
>  block: name = hdb, path = /block/hdb
>    dev = 3:64
>    range = 1
>    block device: bus = ide, bus_id = 0.1 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:02.5/ide0/0.1
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:03.0/usb2/2-1
>  usb dev: /devices/pci0000:00/0000:00:03.0/usb2/2-2
>  usb dev: /devices/pci0000:00/0000:00:03.2/usb4/4-1
>  usb dev: /devices/pci0000:00/0000:00:03.3/usb1
>  usb dev: /devices/pci0000:00/0000:00:03.0/usb2
>  usb dev: /devices/pci0000:00/0000:00:03.1/usb3
>  usb dev: /devices/pci0000:00/0000:00:03.2/usb4
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:03.3/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.16-rc1-git3-7-default ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:00:03.3"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:03.0/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.16-rc1-git3-7-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:03.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 2-1:1.0, bus_id = 2-1:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0
>    modalias = "usb:v046DpC215d0204dc00dsc00dp00ic03isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 3
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-1:1.0 @ /devices/pci0000:00/0000:00:03.0/usb2/2-1
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x046d
>    idProduct = 0xc215
>    manufacturer = "Logitech"
>    product = "Logitech Extreme 3D"
>    bcdDevice = 0204
>    speed = "1.5"
>  usb device: name = 2-1, bus_id = 2-1, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2/2-1
>  usb device: name = 2-2:1.0, bus_id = 2-2:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0
>    modalias = "usb:v056Ep0033d0100dc00dsc00dp00ic03isc01ip02"
>    bInterfaceNumber = 0
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 2-2:1.0 @ /devices/pci0000:00/0000:00:03.0/usb2/2-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x056e
>    idProduct = 0x0033
>    manufacturer = "ELECOM"
>    product = "ELECOM USB mouse with wheel"
>    bcdDevice = 0100
>    speed = "1.5"
>  usb device: name = 2-2, bus_id = 2-2, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2/2-2
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:03.1/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.16-rc1-git3-7-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:03.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:03.2/usb4
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.16-rc1-git3-7-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:03.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 4-1:1.0, bus_id = 4-1:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0
>    modalias = "usb:v0C45p6025d0101dc00dsc00dp00icFFiscFFipFF"
>    bInterfaceNumber = 0
>    bInterfaceClass = 255
>    bInterfaceSubClass = 255
>    bInterfaceProtocol = 255
>    if: 4-1:1.0 @ /devices/pci0000:00/0000:00:03.2/usb4/4-1
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0c45
>    idProduct = 0x6025
>    product = "USB camera"
>    bcdDevice = 0101
>    speed = "12"
>  usb device: name = 4-1, bus_id = 4-1, bus = usb
>    path = /devices/pci0000:00/0000:00:03.2/usb4/4-1
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:03.3/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:03.1/usb3
>  usb device: name = usb4, bus_id = usb4, bus = usb
>    path = /devices/pci0000:00/0000:00:03.2/usb4
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Module joydev not found.
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/input0/event0
>    dev = 13:64
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event1, path = /class/input/input1/event1
>    dev = 13:65
>    input device: bus = platform, bus_id = pcspkr driver = pcspkr
>      path = /devices/platform/pcspkr
>  input: name = event2, path = /class/input/input2/event2
>    dev = 13:66
>    input device: bus = usb, bus_id = 2-1:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0
>  input: name = event3, path = /class/input/input3/event3
>    dev = 13:67
>    input device: bus = usb, bus_id = 2-2:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0
>  input: name = mouse0, path = /class/input/input3/mouse0
>    dev = 13:32
>    input device: bus = usb, bus_id = 2-2:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 398297088
>  chs default: 395136/16/63
>  chs legacy: 1023/255/63
>  caps: fixed edd 
>  attached: #0 
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> modem.1: serial
>******  started child process 2865 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>******  stopped child process 2865 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 2866 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>******  stopped child process 2866 (19s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>>> input.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Module joydev not found.
>----- return code: ? -----
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  S: Sysfs=/class/input/input0
>  H: Handlers=kbd event0 
>  B: EV=120013
>  B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe
>  B: MSC=10
>  B: LED=7
>  
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  S: Sysfs=/class/input/input1
>  H: Handlers=kbd event1 
>  B: EV=40001
>  B: SND=6
>  
>  I: Bus=0003 Vendor=046d Product=c215 Version=0204
>  N: Name="Logitech Logitech Extreme 3D"
>  P: Phys=usb-0000:00:03.0-1/input0
>  S: Sysfs=/class/input/input2
>  H: Handlers=event2 
>  B: EV=b
>  B: KEY=fff00000000 0 0 0 0
>  B: ABS=30063
>  
>  I: Bus=0003 Vendor=056e Product=0033 Version=0100
>  N: Name="ELECOM ELECOM USB mouse with wheel "
>  P: Phys=usb-0000:00:03.0-2/input0
>  S: Sysfs=/class/input/input3
>  H: Handlers=mouse0 event3 
>  B: EV=7
>  B: KEY=70000 0 0 0 0
>  B: REL=103
>  
>----- /proc/bus/input/devices end -----
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event0
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 16, name = PC Speaker
>  handlers = kbd event1
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = Logitech Logitech Extreme 3D
>  handlers = event2
>  key = 00000fff000000000000000000000000000000000000000000000000000000000000000000000000
>  abs = 0000000000030063
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = ELECOM ELECOM USB mouse with wheel
>  handlers = mouse0 event3
>  key = 00000000000700000000000000000000000000000000000000000000000000000000000000000000
>  rel = 0000000000000103
>  mouse buttons = 3
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 15
>  model		: 12
>  model name	: AMD Athlon(tm) 64 Processor 3000+
>  stepping	: 0
>  cpu MHz		: 1999.476
>  cache size	: 512 KB
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
>  bogomips	: 4003.19
>  TLB size	: 1024 4K pages
>  clflush size	: 64
>  cache_alignment	: 64
>  address sizes	: 40 bits physical, 48 bits virtual
>  power management: ts fid vid ttp
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 2
>>> fb.1: read info
>fb: size 1280 x 1024
>fb: timing 131.10 MHz, 80.33 kHz, 76.65 Hz
>>> net.1: get network data
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  lo: ethtool link state: 1
>>> pppoe.1: looking for pppoe
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: disk/by-id/ata-AOPEN_DUW1608ARR________________
>  S: disk/by-path/pci-0000:00:02.5-ide-0:0
>  E: ID_TYPE=cd
>  E: ID_MODEL=AOPEN_DUW1608ARR
>  E: ID_SERIAL=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
>  E: ID_REVISION=A070
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:02.5-ide-0:0
>  
>  P: /block/hdb
>  N: hdb
>  S: disk/by-path/pci-0000:00:02.5-ide-0:1
>  E: ID_TYPE=cd
>  E: ID_MODEL=MATSHITA_CR-583
>  E: ID_SERIAL=
>  E: ID_REVISION=1.04
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:02.5-ide-0:1
>  
>  P: /class/input/input0/event0
>  N: input/event0
>  
>  P: /class/input/input1/event1
>  N: input/event1
>  
>  P: /class/input/input2/event2
>  N: input/event2
>  
>  P: /class/input/input3/event3
>  N: input/event3
>  
>  P: /class/input/input3/mouse0
>  N: input/mouse0
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/misc/device-mapper
>  N: device-mapper
>  S: mapper/control
>  
>  P: /class/usb_device/usbdev1.1
>  N: bus/usb/001/001
>  
>  P: /class/usb_device/usbdev2.1
>  N: bus/usb/002/001
>  
>  P: /class/usb_device/usbdev2.2
>  N: bus/usb/002/002
>  
>  P: /class/usb_device/usbdev2.3
>  N: bus/usb/002/003
>  
>  P: /class/usb_device/usbdev3.1
>  N: bus/usb/003/001
>  
>  P: /class/usb_device/usbdev4.1
>  N: bus/usb/004/001
>  
>  P: /class/usb_device/usbdev4.2
>  N: bus/usb/004/002
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-id/ata-AOPEN_DUW1608ARR________________, disk/by-path/pci-0000:00:02.5-ide-0:0
>/block/hdb
>  name: hdb
>  links: disk/by-path/pci-0000:00:02.5-ide-0:1
>/class/input/input0/event0
>  name: input/event0
>/class/input/input1/event1
>  name: input/event1
>/class/input/input2/event2
>  name: input/event2
>/class/input/input3/event3
>  name: input/event3
>/class/input/input3/mouse0
>  name: input/mouse0
>/class/input/mice
>  name: input/mice
>/class/misc/device-mapper
>  name: device-mapper
>  links: mapper/control
>/class/usb_device/usbdev1.1
>  name: bus/usb/001/001
>/class/usb_device/usbdev2.1
>  name: bus/usb/002/001
>/class/usb_device/usbdev2.2
>  name: bus/usb/002/002
>/class/usb_device/usbdev2.3
>  name: bus/usb/002/003
>/class/usb_device/usbdev3.1
>  name: bus/usb/003/001
>/class/usb_device/usbdev4.1
>  name: bus/usb/004/001
>/class/usb_device/usbdev4.2
>  name: bus/usb/004/002
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (failed)
>  old prop read: rdCR.3wRL2_g4d2B (failed)
>  prop read: /org/freedesktop/Hal/devices/platform_floppy_0_storage (failed)
>  prop read: sPPV.oZ89vuho4Y3 (failed)
>  old prop read: sPPV.oZ89vuho4Y3 (failed)
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: YMnp.ecK7NLYWZ5D (failed)
>  old prop read: YMnp.ecK7NLYWZ5D (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_755 (failed)
>  prop read: qLht.wqaFLJ+okh8 (failed)
>  old prop read: qLht.wqaFLJ+okh8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_2 (failed)
>  prop read: vSkL.NVv9AfhhZO6 (failed)
>  old prop read: vSkL.NVv9AfhhZO6 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_964 (failed)
>  prop read: _Znp.zE1J_7Ozu_D (failed)
>  old prop read: _Znp.zE1J_7Ozu_D (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_5513 (failed)
>  prop read: JCE+.ILEqWq8emm2 (failed)
>  old prop read: JCE+.ILEqWq8emm2 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_7012 (failed)
>  prop read: 1sCg.6DGQrI7bu4A (failed)
>  old prop read: 1sCg.6DGQrI7bu4A (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_7001_1 (failed)
>  prop read: 3hqH._UMLza31dT7 (failed)
>  old prop read: 3hqH._UMLza31dT7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_7001_0 (failed)
>  prop read: w+J7._UMLza31dT7 (failed)
>  old prop read: w+J7._UMLza31dT7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_7001 (failed)
>  prop read: nKpy._UMLza31dT7 (failed)
>  old prop read: nKpy._UMLza31dT7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_7002 (failed)
>  prop read: ffIo.0cWwMxV08H1 (failed)
>  old prop read: ffIo.0cWwMxV08H1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_900 (failed)
>  prop read: 8otl.ZcoW8uQF_S7 (failed)
>  old prop read: 8otl.ZcoW8uQF_S7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1039_180 (failed)
>  prop read: CvwD.m5pcLibJYF0 (failed)
>  old prop read: CvwD.m5pcLibJYF0 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_17fe_2120 (failed)
>  prop read: bSAa.YIqYOt_Wuj6 (failed)
>  old prop read: bSAa.YIqYOt_Wuj6 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1100 (failed)
>  prop read: fiDB.ptk_g9XAN03 (failed)
>  old prop read: fiDB.ptk_g9XAN03 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1101 (failed)
>  prop read: W1j0.KIhk9ketuO3 (failed)
>  old prop read: W1j0.KIhk9ketuO3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1102 (failed)
>  prop read: OMCs.ridUeImaQn3 (failed)
>  old prop read: OMCs.ridUeImaQn3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1103 (failed)
>  prop read: Fhhh.M7aE7ttHy94 (failed)
>  old prop read: Fhhh.M7aE7ttHy94 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_f1 (failed)
>  prop read: VCu0.T2xJ7cYtIB7 (failed)
>  old prop read: VCu0.T2xJ7cYtIB7 (failed)
>  prop read: /org/freedesktop/Hal/devices/platform_serial8250_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR (failed)
>  prop read: Fffu.BkGZq9tHnr6 (failed)
>  old prop read: Fffu.BkGZq9tHnr6 (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_MATSHITA_CR_583 (failed)
>  prop read: iqvy.6Kmn11S5Q8D (failed)
>  old prop read: iqvy.6Kmn11S5Q8D (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3_if0 (failed)
>  prop read: k4bc.DmIR2jwB+r6 (failed)
>  old prop read: k4bc.DmIR2jwB+r6 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0 (failed)
>  prop read: pBe4._SMicpzZSm1 (failed)
>  old prop read: pBe4._SMicpzZSm1 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0_logicaldev_input (failed)
>  prop read: FKGF.UEz5Udoac1A (failed)
>  old prop read: FKGF.UEz5Udoac1A (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0_logicaldev_input (failed)
>  prop read: hSuP.Ypo3jnPTx_2 (failed)
>  old prop read: hSuP.Ypo3jnPTx_2 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1_if0 (failed)
>  prop read: uIhY.lBRH_ZmHP29 (failed)
>  old prop read: uIhY.lBRH_ZmHP29 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2_if0 (failed)
>  prop read: zPk0.WwVsLKZ+LK0 (failed)
>  old prop read: zPk0.WwVsLKZ+LK0 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_c45_6025_noserial_if0 (failed)
>  prop read: PYMB.Sups0S12LE9 (failed)
>  old prop read: PYMB.Sups0S12LE9 (failed)
>  prop read: /org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input (failed)
>  prop read: nLyy.TBWTwSuMeW2 (failed)
>  old prop read: nLyy.TBWTwSuMeW2 (failed)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>----- /proc/modules -----
>  parport_pc 40808 0 - Live 0xffffffff881e7000
>  parport 40972 1 parport_pc, Live 0xffffffff881db000
>  multipath 8960 0 - Live 0xffffffff88221000
>  raid6 102176 0 - Live 0xffffffff88207000
>  raid5 25472 0 - Live 0xffffffff881ff000
>  xor 6160 2 raid6,raid5, Live 0xffffffff881fc000
>  raid1 22528 0 - Live 0xffffffff881f5000
>  raid0 7808 0 - Live 0xffffffff881f2000
>  dm_snapshot 15824 0 - Live 0xffffffff881d6000
>  dm_mod 61120 1 dm_snapshot, Live 0xffffffff881c6000
>  nls_utf8 2432 0 - Live 0xffffffff881c4000
>  fan 5640 0 - Live 0xffffffff881c1000
>  thermal 16400 0 - Live 0xffffffff881bb000
>  processor 26708 1 thermal, Live 0xffffffff881b3000
>  usb_storage 81088 0 - Live 0xffffffff8819e000
>  ohci_hcd 20868 0 - Live 0xffffffff88197000
>  usbhid 45472 0 - Live 0xffffffff8818a000
>  ehci_hcd 31880 0 - Live 0xffffffff88181000
>  usbcore 135336 5 usb_storage,ohci_hcd,usbhid,ehci_hcd, Live 0xffffffff8815e000
>  sata_sis 9220 0 - Live 0xffffffff8815a000
>  libata 60944 1 sata_sis, Live 0xffffffff8814a000
>  sis5513 14096 0 [permanent], Live 0xffffffff88145000
>  loop 16528 2 - Live 0xffffffff8813f000
>  floppy 67784 0 - Live 0xffffffff8812d000
>  ide_disk 16768 0 - Live 0xffffffff88127000
>  nfs 216792 0 - Live 0xffffffff880f1000
>  nfs_acl 4096 1 nfs, Live 0xffffffff880ef000
>  lockd 71792 1 nfs, Live 0xffffffff880dc000
>  sunrpc 157000 3 nfs,nfs_acl,lockd, Live 0xffffffff880b4000
>  cramfs 44228 1 - Live 0xffffffff880a8000
>  vfat 13824 0 - Live 0xffffffff880a3000
>  fat 53680 1 vfat, Live 0xffffffff88094000
>  nls_iso8859_1 5504 0 - Live 0xffffffff88091000
>  nls_cp437 7296 0 - Live 0xffffffff8808e000
>  af_packet 23436 0 - Live 0xffffffff88087000
>  edd 10504 0 - Live 0xffffffff88083000
>  sg 36520 0 - Live 0xffffffff88079000
>  st 39716 0 - Live 0xffffffff8806e000
>  sd_mod 18048 0 - Live 0xffffffff88068000
>  sr_mod 17060 0 - Live 0xffffffff88062000
>  scsi_mod 147056 6 usb_storage,libata,sg,st,sd_mod,sr_mod, Live 0xffffffff8803d000
>  ide_cd 40864 0 - Live 0xffffffff88032000
>  cdrom 36264 2 sr_mod,ide_cd, Live 0xffffffff88028000
>  ide_core 147940 4 usb_storage,sis5513,ide_disk,ide_cd, Live 0xffffffff88002000
>----- /proc/modules end -----
>  used irqs: 0,1,3,4,5,6,8,9,10,14,41,49,57
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.112]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (28 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.120]
>  UDI: /org/freedesktop/Hal/devices/platform_floppy_0_storage
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 3.5 ''
>  Size: 2880 sectors a 512 bytes
>  Geometry (Logical): CHS 80/2/18
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.156]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Parallel Port 0: 0x378
>  Base Memory: 638 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  MP spec rev 1.4 info:
>    OEM id: "OEM00000"
>    Product id: "PROD00000000"
>    1 CPUs (0 disabled)
>  BIOS32 Service Directory Entry: 0xfb4c0
>  SMBIOS Version: 2.2
>  BIOS Info: #0
>    Vendor: "Phoenix Technologies, LTD"
>    Version: "6.00 PG"
>    Date: "11/05/2003"
>    Start Address: 0xe0000
>    ROM Size: 256 kB
>    Features: 0x0037000000007fcb9e90
>      ISA supported
>      PCI supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      CD boot supported
>      Selectable boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      AGP supported
>      LS-120 boot supported
>      ATAPI ZIP boot supported
>  System Info: #1
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Product: "SiS-755"
>  Chassis Info: #3
>    Type: 0x03 (Desktop)
>    Bootup State: 0x02 (Unknown)
>    Power Supply State: 0x02 (Unknown)
>    Thermal State: 0x02 (Unknown)
>    Security Status: 0x02 (Unknown)
>  Processor Info: #4
>    Socket: "Socket A"
>    Socket Type: 0x04 (ZIF Socket)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x18 (Duron)
>    Manufacturer: "AMD"
>    Version: "AMD Athlon(tm) 64 Processor 3000+"
>    Processor ID: 0x078bfbff00000fc0
>    Status: 0x01 (Enabled)
>    Voltage: 3.3 V
>    External Clock: 200 MHz
>    Max. Speed: 1500 MHz
>    Current Speed: 2000 MHz
>    L1 Cache: #8
>    L2 Cache: #9
>  Type 5 Record: #5
>    Data 00: 05 14 05 00 06 04 03 03 0b 0c 00 14 00 01 02 06
>    Data 10: 00 07 00 00
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 ff 0a 01 00 7f 7f 00
>    String 1: "A0"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 0a 01 00 89 89 00
>    String 1: "A1"
>  Cache Info: #8
>    Designation: "Internal Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 128 kB
>    Current Size: 128 kB
>    Supported SRAM Types: 0x0020 (Synchronous)
>    Current SRAM Type: 0x0020 (Synchronous)
>  Cache Info: #9
>    Designation: "External Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 512 kB
>    Current Size: 512 kB
>    Supported SRAM Types: 0x0020 (Synchronous)
>    Current SRAM Type: 0x0020 (Synchronous)
>  Port Connector: #10
>    Type: 0xff (Other)
>    Internal Designator: "PRIMARY IDE"
>  Port Connector: #11
>    Type: 0xff (Other)
>    Internal Designator: "SECONDARY IDE"
>  Port Connector: #12
>    Type: 0xa1 (8251 FIFO Compatible)
>    Internal Designator: "FDD"
>  Port Connector: #13
>    Type: 0x07 (Serial Port 16450 Compatible)
>    Internal Designator: "COM1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #14
>    Type: 0x07 (Serial Port 16450 Compatible)
>    Internal Designator: "COM2"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #15
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "LPT1"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #16
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #17
>    Type: 0x0e (Mouse Port)
>    Internal Designator: "PS/2 Mouse"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #18
>    Type: 0x10 (USB)
>    External Designator: "USB0"
>    External Connector: 0xff (Other)
>  System Slot: #19
>    Designation: "PCI0"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0102 (5.0 V, PME#)
>  System Slot: #20
>    Designation: "PCI1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x04 (Long)
>    Slot ID: 2
>    Characteristics: 0x0102 (5.0 V, PME#)
>  System Slot: #21
>    Designation: "PCI2"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 3
>    Characteristics: 0x0102 (5.0 V, PME#)
>  System Slot: #22
>    Designation: "PCI3"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 4
>    Characteristics: 0x0102 (5.0 V, PME#)
>  System Slot: #23
>    Designation: "AGP"
>    Type: 0x0f (AGP)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 8
>    Characteristics: 0x0002 (5.0 V)
>  Language Info: #24
>    Languages: n|US|iso8859-1, n|US|iso8859-1, r|CA|iso8859-1, a|JP|unicode
>    Current: n|US|iso8859-1
>  Physical Memory Array: #25
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 2
>    Max. Size: 2 GB
>    ECC: 0x03 (None)
>  Memory Device: #26
>    Location: "A0"
>    Bank: "Bank0/1"
>    Memory Array: #25
>    Form Factor: 0x09 (DIMM)
>    Type: 0x02 (Unknown)
>    Data Width: 0 bits
>    Size: No Memory Installed
>  Memory Device: #27
>    Location: "A1"
>    Bank: "Bank2/3"
>    Memory Array: #25
>    Form Factor: 0x09 (DIMM)
>    Type: 0x02 (Unknown)
>    Data Width: 0 bits
>    Size: 512 MB
>  Memory Array Mapping: #28
>    Memory Array: #25
>    Partition Width: 1
>    Start Address: 0x00000000
>    End Address: 0x20000000
>  Memory Device Mapping: #29
>    Memory Device: #26
>    Array Mapping: #28
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x00000400
>  Memory Device Mapping: #30
>    Memory Device: #27
>    Array Mapping: #28
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x20000000
>  Type 32 Record: #31
>    Data 00: 20 0b 1f 00 00 00 00 00 00 00 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.57]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Formfactor: "unknown"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (70324 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x1ffeffff (rw)
>  Memory Size: 512 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI(AGP) 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_755
>  Unique ID: qLht.wqaFLJ+okh8
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Elitegroup 755 Host"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x0755 "755 Host"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x01
>  Driver: "agpgart-amd64"
>  Memory Range: 0xe0000000-0xe7ffffff (rw,non-prefetchable)
>  Module Alias: "pci:v00001039d00000755sv00001019sd00001891bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_2
>  Unique ID: vSkL.NVv9AfhhZO6
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "Silicon Integrated SG86C202"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x0002 "SG86C202"
>  Module Alias: "pci:v00001039d00000002sv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 02.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_964
>  Unique ID: _Znp.zE1J_7Ozu_D
>  SysFS ID: /devices/pci0000:00/0000:00:02.0
>  SysFS BusID: 0000:00:02.0
>  Hardware Class: bridge
>  Model: "Silicon Integrated SiS964 [MuTIOL Media IO]"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x0964 "SiS964 [MuTIOL Media IO]"
>  Revision: 0x36
>  Module Alias: "pci:v00001039d00000964sv00000000sd00000000bc06sc01i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 02.5: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_5513
>  Unique ID: JCE+.ILEqWq8emm2
>  SysFS ID: /devices/pci0000:00/0000:00:02.5
>  SysFS BusID: 0000:00:02.5
>  Hardware Class: storage
>  Model: "Elitegroup 5513 [IDE]"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x5513 "5513 [IDE]"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x01
>  Driver: "SIS_IDE"
>  I/O Ports: 0x4000-0x400f (rw)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  IRQ: 14 (3877 events)
>  Module Alias: "pci:v00001039d00005513sv00001019sd00001891bc01sc01i80"
>  Driver Info #0:
>    Driver Status: sis5513 is active
>    Driver Activation Cmd: "modprobe sis5513"
>  Driver Info #1:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>19: PCI 02.7: 0401 Multimedia audio controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_7012
>  Unique ID: 1sCg.6DGQrI7bu4A
>  SysFS ID: /devices/pci0000:00/0000:00:02.7
>  SysFS BusID: 0000:00:02.7
>  Hardware Class: sound
>  Model: "Elitegroup Sound Controller"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x7012 "Sound Controller"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0xa0
>  I/O Ports: 0xd000-0xd0ff (rw)
>  I/O Ports: 0xd400-0xd47f (rw)
>  IRQ: 10 (no events)
>  Module Alias: "pci:v00001039d00007012sv00001019sd00001891bc04sc01i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 03.0: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_7001_1
>  Unique ID: 3hqH._UMLza31dT7
>  SysFS ID: /devices/pci0000:00/0000:00:03.0
>  SysFS BusID: 0000:00:03.0
>  Hardware Class: usb controller
>  Model: "Elitegroup USB 1.0 Controller"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x7001 "USB 1.0 Controller"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x0f
>  Driver: "ohci_hcd"
>  Memory Range: 0xec004000-0xec004fff (rw,non-prefetchable)
>  IRQ: 185 (1004 events)
>  Module Alias: "pci:v00001039d00007001sv00001019sd00001891bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 03.1: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_7001_0
>  Unique ID: w+J7._UMLza31dT7
>  SysFS ID: /devices/pci0000:00/0000:00:03.1
>  SysFS BusID: 0000:00:03.1
>  Hardware Class: usb controller
>  Model: "Elitegroup USB 1.0 Controller"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x7001 "USB 1.0 Controller"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x0f
>  Driver: "ohci_hcd"
>  Memory Range: 0xec000000-0xec000fff (rw,non-prefetchable)
>  IRQ: 193 (no events)
>  Module Alias: "pci:v00001039d00007001sv00001019sd00001891bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 03.2: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_7001
>  Unique ID: nKpy._UMLza31dT7
>  SysFS ID: /devices/pci0000:00/0000:00:03.2
>  SysFS BusID: 0000:00:03.2
>  Hardware Class: usb controller
>  Model: "Elitegroup USB 1.0 Controller"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x7001 "USB 1.0 Controller"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x0f
>  Driver: "ohci_hcd"
>  Memory Range: 0xec001000-0xec001fff (rw,non-prefetchable)
>  IRQ: 201 (18 events)
>  Module Alias: "pci:v00001039d00007001sv00001019sd00001891bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>23: PCI 03.3: 0c03 USB Controller (EHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_7002
>  Unique ID: ffIo.0cWwMxV08H1
>  SysFS ID: /devices/pci0000:00/0000:00:03.3
>  SysFS BusID: 0000:00:03.3
>  Hardware Class: usb controller
>  Model: "Elitegroup USB 2.0 Controller"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x7002 "USB 2.0 Controller"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Driver: "ehci_hcd"
>  Memory Range: 0xec002000-0xec002fff (rw,non-prefetchable)
>  IRQ: 177 (4 events)
>  Module Alias: "pci:v00001039d00007002sv00001019sd00001891bc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>24: PCI 04.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_900
>  Unique ID: 8otl.ZcoW8uQF_S7
>  SysFS ID: /devices/pci0000:00/0000:00:04.0
>  SysFS BusID: 0000:00:04.0
>  Hardware Class: network
>  Model: "Elitegroup SiS900 PCI Fast Ethernet"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x0900 "SiS900 PCI Fast Ethernet"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x91
>  I/O Ports: 0xd800-0xd8ff (rw)
>  Memory Range: 0xec003000-0xec003fff (rw,non-prefetchable)
>  Memory Range: 0x30000000-0x3001ffff (ro,prefetchable,disabled)
>  IRQ: 5 (no events)
>  Module Alias: "pci:v00001039d00000900sv00001019sd00001891bc02sc00i00"
>  Driver Info #0:
>    Driver Status: sis900 is not active
>    Driver Activation Cmd: "modprobe sis900"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>25: PCI 05.0: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1039_180
>  Unique ID: CvwD.m5pcLibJYF0
>  SysFS ID: /devices/pci0000:00/0000:00:05.0
>  SysFS BusID: 0000:00:05.0
>  Hardware Class: storage
>  Model: "Elitegroup RAID bus controller 180 SATA/PATA  [SiS]"
>  Vendor: pci 0x1039 "Silicon Integrated Systems Corp."
>  Device: pci 0x0180 "RAID bus controller 180 SATA/PATA  [SiS]"
>  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
>  SubDevice: pci 0x1891 
>  Revision: 0x01
>  Driver: "SIS_IDE"
>  I/O Ports: 0xdc00-0xdc07 (rw)
>  I/O Ports: 0xe000-0xe003 (rw)
>  I/O Ports: 0xe400-0xe407 (rw)
>  I/O Ports: 0xe800-0xe803 (rw)
>  I/O Ports: 0xec00-0xec0f (rw)
>  IRQ: 169 (no events)
>  Module Alias: "pci:v00001039d00000180sv00001019sd00001891bc01sc01i85"
>  Driver Info #0:
>    Driver Status: sata_sis is active
>    Driver Activation Cmd: "modprobe sata_sis"
>  Driver Info #1:
>    Driver Status: sis5513 is active
>    Driver Activation Cmd: "modprobe sis5513"
>  Driver Info #2:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>26: PCI 0a.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_17fe_2120
>  Unique ID: bSAa.YIqYOt_Wuj6
>  SysFS ID: /devices/pci0000:00/0000:00:0a.0
>  SysFS BusID: 0000:00:0a.0
>  Hardware Class: network
>  Model: "Linksys WMP11v4 802.11b PCI card"
>  Vendor: pci 0x17fe "Linksys, A Division of Cisco Systems"
>  Device: pci 0x2120 "WMP11v4 802.11b PCI card"
>  SubVendor: pci 0x1737 "Linksys"
>  SubDevice: pci 0x0020 
>  Memory Range: 0xec005000-0xec0057ff (rw,non-prefetchable)
>  IRQ: 10 (no events)
>  Module Alias: "pci:v000017FEd00002120sv00001737sd00000020bc02sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>27: PCI 18.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1100
>  Unique ID: fiDB.ptk_g9XAN03
>  SysFS ID: /devices/pci0000:00/0000:00:18.0
>  SysFS BusID: 0000:00:18.0
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
>  Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: PCI 18.1: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1101
>  Unique ID: W1j0.KIhk9ketuO3
>  SysFS ID: /devices/pci0000:00/0000:00:18.1
>  SysFS BusID: 0000:00:18.1
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] Address Map"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map"
>  Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: PCI 18.2: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1102
>  Unique ID: OMCs.ridUeImaQn3
>  SysFS ID: /devices/pci0000:00/0000:00:18.2
>  SysFS BusID: 0000:00:18.2
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] DRAM Controller"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller"
>  Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: PCI 18.3: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1103
>  Unique ID: Fhhh.M7aE7ttHy94
>  SysFS ID: /devices/pci0000:00/0000:00:18.3
>  SysFS BusID: 0000:00:18.3
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control"
>  Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_f1
>  Unique ID: VCu0.T2xJ7cYtIB7
>  Parent ID: vSkL.NVv9AfhhZO6
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>  SysFS BusID: 0000:01:00.0
>  Hardware Class: graphics card
>  Model: "Giga-byte GeForce 6600/GeForce 6600 GT"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x00f1 "GeForce 6600/GeForce 6600 GT"
>  SubVendor: pci 0x1458 "Giga-byte Technology"
>  SubDevice: pci 0x3150 
>  Revision: 0xa2
>  Memory Range: 0xe8000000-0xe8ffffff (rw,non-prefetchable)
>  Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable)
>  Memory Range: 0xe9000000-0xe9ffffff (rw,non-prefetchable)
>  Memory Range: 0xea000000-0xea01ffff (ro,prefetchable,disabled)
>  IRQ: 3 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v000010DEd000000F1sv00001458sd00003150bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: nv
>  Driver Info #1:
>    XFree86 v4 Server Module: nvidia
>    3D Support: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (PCI bridge)
>
>32: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/platform_serial8250_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (38 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: IDE 00.0: 10602 CD-ROM (DVD-R)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_AOPEN_DUW1608/ARR
>  Unique ID: Fffu.BkGZq9tHnr6
>  Parent ID: JCE+.ILEqWq8emm2
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:02.5/ide0/0.0
>  Hardware Class: cdrom
>  Model: "AOPEN DUW1608/ARR"
>  Vendor: "AOPEN"
>  Device: "DUW1608/ARR"
>  Revision: "A070"
>  Serial ID: ""
>  Driver: "SIS_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-id/ata-AOPEN_DUW1608ARR________________
>  Device Files: /dev/hda, /dev/disk/by-id/ata-AOPEN_DUW1608ARR________________, /dev/disk/by-path/pci-0000:00:02.5-ide-0:0
>  Device Number: block 3:0
>  Features: CD-R, CD-RW, DVD, DVD-R
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (IDE interface)
>  Drive Speed: 48
>  Volume ID: "SU10042B.001"
>  Application: "SUSE-Linux-CD-OSS-x86_64-10.0.42#Beta3"
>  Publisher: "Novell, Inc."
>  Preparer: "CD-Team, http://bugs.opensuse.org"
>  Creation date: "2006020115362700"
>  El Torito info: platform 0, bootable
>    Boot Catalog: at sector 0x00e1
>    Id String: "Novell, Inc."
>    Media: none starting at sector 0x00e2
>    Load: 2048 bytes
>
>34: IDE 01.0: 10602 CD-ROM
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_MATSHITA_CR_583
>  Unique ID: iqvy.6Kmn11S5Q8D
>  Parent ID: JCE+.ILEqWq8emm2
>  SysFS ID: /block/hdb
>  SysFS BusID: 0.1
>  SysFS Device Link: /devices/pci0000:00/0000:00:02.5/ide0/0.1
>  Hardware Class: cdrom
>  Model: "MATSHITA CR-583"
>  Vendor: "MATSHITA"
>  Device: "CR-583"
>  Revision: "1.04"
>  Serial ID: ""
>  Driver: "SIS_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-path/pci-0000:00:02.5-ide-0:1
>  Device Files: /dev/hdb, /dev/disk/by-path/pci-0000:00:02.5-ide-0:1
>  Device Number: block 3:64
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (IDE interface)
>  Drive Speed: 8
>
>35: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_3_if0
>  Unique ID: k4bc.DmIR2jwB+r6
>  Parent ID: ffIo.0cWwMxV08H1
>  SysFS ID: /devices/pci0000:00/0000:00:03.3/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.16-rc1-git3-7-default ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.16-rc1-git3-7-default ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:03.3"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #23 (USB Controller)
>
>36: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0
>  Unique ID: pBe4._SMicpzZSm1
>  Parent ID: 3hqH._UMLza31dT7
>  SysFS ID: /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.16-rc1-git3-7-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.16-rc1-git3-7-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:03.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>37: USB 00.0: 0000 Unclassified device
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_46d_c215_noserial_if0_logicaldev_input
>  Unique ID: FKGF.UEz5Udoac1A
>  Parent ID: pBe4._SMicpzZSm1
>  SysFS ID: /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0
>  SysFS BusID: 2-1:1.0
>  Hardware Class: unknown
>  Model: "Logitech Extreme 3D"
>  Hotplug: USB
>  Vendor: usb 0x046d "Logitech Inc."
>  Device: usb 0xc215 "Logitech Extreme 3D"
>  Revision: "2.04"
>  Driver: "usbhid"
>  Device File: /dev/input/event2
>  Device Number: char 13:66
>  Speed: 1.5 Mbps
>  Module Alias: "usb:v046DpC215d0204dc00dsc00dp00ic03isc00ip00"
>  Driver Info #0:
>    Driver Status: usbhid is active
>    Driver Activation Cmd: "modprobe usbhid"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #36 (Hub)
>
>38: USB 00.0: 10503 USB Mouse
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_56e_33_noserial_if0_logicaldev_input
>  Unique ID: hSuP.Ypo3jnPTx_2
>  Parent ID: pBe4._SMicpzZSm1
>  SysFS ID: /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0
>  SysFS BusID: 2-2:1.0
>  Hardware Class: mouse
>  Model: "LANEED ELECOM USB mouse with wheel"
>  Hotplug: USB
>  Vendor: usb 0x056e "LANEED"
>  Device: usb 0x0033 "ELECOM USB mouse with wheel"
>  Revision: "1.00"
>  Compatible to: int 0x0210 0x0013
>  Driver: "usbhid"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3
>  Device Number: char 13:63 (char 13:32)
>  Speed: 1.5 Mbps
>  Module Alias: "usb:v056Ep0033d0100dc00dsc00dp00ic03isc01ip02"
>  Driver Info #0:
>    Buttons: 3
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #36 (Hub)
>
>39: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_1_if0
>  Unique ID: uIhY.lBRH_ZmHP29
>  Parent ID: w+J7._UMLza31dT7
>  SysFS ID: /devices/pci0000:00/0000:00:03.1/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.16-rc1-git3-7-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.16-rc1-git3-7-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:03.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #21 (USB Controller)
>
>40: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_2_if0
>  Unique ID: zPk0.WwVsLKZ+LK0
>  Parent ID: nKpy._UMLza31dT7
>  SysFS ID: /devices/pci0000:00/0000:00:03.2/usb4/4-0:1.0
>  SysFS BusID: 4-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.16-rc1-git3-7-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.16-rc1-git3-7-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:03.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #22 (USB Controller)
>
>41: USB 00.0: 0000 Unclassified device
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_c45_6025_noserial_if0
>  Unique ID: PYMB.Sups0S12LE9
>  Parent ID: zPk0.WwVsLKZ+LK0
>  SysFS ID: /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0
>  SysFS BusID: 4-1:1.0
>  Hardware Class: unknown
>  Model: "USB camera"
>  Hotplug: USB
>  Vendor: usb 0x0c45 
>  Device: usb 0x6025 "USB camera"
>  Revision: "1.01"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0C45p6025d0101dc00dsc00dp00icFFiscFFipFF"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #40 (Hub)
>
>42: PS/2 00.0: 10800 Keyboard
>  [Created at input.137]
>  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input
>  Unique ID: nLyy.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event0
>  Device Number: char 13:64
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>43: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: X86-64
>  Vendor: "AuthenticAMD"
>  Model: 15.12.0 "AMD Athlon(tm) 64 Processor 3000+"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,syscall,nx,mmxext,lm,3dnowext,3dnow
>  Clock: 2000 MHz
>  Cache: 512 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>44: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1280x1024@77Hz
>  Driver Info #0:
>    Max. Resolution: 1280x1024
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-82 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: None 00.0: 10700 Loopback
>  [Created at net.114]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 151473: 69135 | 69426 | 69427 | 69428 | 71214 | 71215