Attachment 70563 Details for Bug 152101

hwinfo all

hwinfo.txt (text/plain), 158.49 KB, created by Jon Nelson on 2006-02-28 03:46:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jon Nelson

Created: 2006-02-28 03:46:26 UTC

Size: 158.49 KB

patch

obsolete

>============ start debug info ============
>libhd version 12.8 (ia32)
>using /var/lib/hardware
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda3  splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 163841 at 0xb7bc1000
>>> hal.1: read hal data
>  hal: connected to: :1.11
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Sleep Button'
>  button.type = 'sleep'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 9 (0x9)
>  linux.acpi_path = '/proc/acpi/button/sleep/SLPB'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 9 (0x9)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  2: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 9 (0x9)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  3: udi = '/org/freedesktop/Hal/devices/acpi_LID'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_LID'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = true
>  button.state.value = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Lid Switch'
>  button.type = 'lid'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 9 (0x9)
>  linux.acpi_path = '/proc/acpi/button/lid/LID'
>
>  4: udi = '/org/freedesktop/Hal/devices/acpi_ACAD'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_ACAD'
>  linux.hotplug_type = 4 (0x4)
>  ac_adapter.present = true
>  info.capabilities = { 'ac_adapter' }
>  info.category = 'ac_adapter'
>  info.product = 'AC Adapter'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 3 (0x3)
>  linux.acpi_path = '/proc/acpi/ac_adapter/ACAD'
>
>  5: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = true
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  6: udi = '/org/freedesktop/Hal/devices/acpi_BAT1'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_BAT1'
>  linux.hotplug_type = 4 (0x4)
>  battery.charge_level.percentage = 100 (0x64)
>  battery.charge_level.rate = 0 (0x0)
>  battery.charge_level.last_full = 27187600 (0x19ed990)
>  battery.charge_level.current = 27187600 (0x19ed990)
>  battery.voltage.current = 16400 (0x4010)
>  battery.reporting.rate = 0 (0x0)
>  battery.reporting.current = 1837 (0x72d)
>  battery.charge_level.capacity_state = 'ok'
>  battery.rechargeable.is_discharging = false
>  battery.rechargeable.is_charging = false
>  battery.is_rechargeable = true
>  battery.charge_level.unit = 'mWh'
>  battery.charge_level.granularity_2 = 44400000 (0x2a57d80)
>  battery.charge_level.granularity_1 = 44400 (0xad70)
>  battery.charge_level.low = 44400 (0xad70)
>  battery.charge_level.warning = 44400 (0xad70)
>  battery.charge_level.design = 59200000 (0x3875200)
>  battery.voltage.design = 14800 (0x39d0)
>  battery.voltage.unit = 'mV'
>  battery.reporting.granularity_2 = 3000 (0xbb8)
>  battery.reporting.granularity_1 = 3 (0x3)
>  battery.reporting.low = 3 (0x3)
>  battery.reporting.warning = 3 (0x3)
>  battery.reporting.design = 4000 (0xfa0)
>  battery.reporting.last_full = 1837 (0x72d)
>  battery.reporting.unit = 'mAh'
>  battery.technology = 'LION'
>  battery.serial = '00017'
>  battery.model = '48630'
>  battery.vendor = 'SANYO'
>  battery.present = true
>  info.capabilities = { 'battery' }
>  info.category = 'battery'
>  battery.type = 'primary'
>  info.product = 'Battery Bay'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 0 (0x0)
>  linux.acpi_path = '/proc/acpi/battery/BAT1'
>
>  7: udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'floppy'
>  storage.policy.desired_mount_point = 'floppy'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
>  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  storage.drive_type = 'floppy'
>  info.product = 'PC Floppy Drive'
>  info.vendor = ''
>  storage.vendor = 'PC Floppy Drive'
>  storage.model = ''
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = true
>  storage.bus = 'platform'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 2 (0x2)
>  block.device = '/dev/fd0'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  linux.sysfs_path_device = '/sys/block/fd0'
>  linux.sysfs_path = '/sys/block/fd0'
>
>  8: udi = '/org/freedesktop/Hal/devices/volume_uuid_d011ce14_c956_4aa1_8003_7abbc01ca61a'
>  volume.unmount.valid_options = { 'lazy' }
>  volume.mount.valid_other_fs = { 'subfs' }
>  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'data=' }
>  org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
>  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
>  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
>  volume.ignore = false
>  volume.policy.desired_mount_point = 'idedisk'
>  volume.policy.mount_filesystem = 'ext3'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d011ce14_c956_4aa1_8003_7abbc01ca61a'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext3)'
>  volume.size = 246726144ull (0xeb4be00ull)
>  volume.num_blocks = 481887 (0x75a5f)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/boot'
>  volume.label = ''
>  volume.uuid = 'd011ce14-c956-4aa1-8003-7abbc01ca61a'
>  volume.fsversion = '1.0'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext3'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  linux.sysfs_path_device = '/sys/block/hda/hda1'
>  linux.sysfs_path = '/sys/block/hda/hda1'
>
>  9: udi = '/org/freedesktop/Hal/devices/volume_uuid_16551f65_385f_4909_ab76_9ad5c12c947f'
>  volume.unmount.valid_options = { 'lazy' }
>  volume.mount.valid_other_fs = { 'subfs' }
>  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'data=' }
>  org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject' }
>  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
>  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
>  volume.ignore = false
>  volume.policy.desired_mount_point = 'idedisk'
>  volume.policy.mount_filesystem = 'ext3'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_16551f65_385f_4909_ab76_9ad5c12c947f'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext3)'
>  volume.size = 789626880ull (0x2f10c000ull)
>  volume.num_blocks = 1542240 (0x178860)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = '16551f65-385f-4909-ab76-9ad5c12c947f'
>  volume.fsversion = '1.0'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext3'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  linux.sysfs_path_device = '/sys/block/hda/hda2'
>  linux.sysfs_path = '/sys/block/hda/hda2'
>
>  10: udi = '/org/freedesktop/Hal/devices/volume_part3_size_509967360'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_509967360'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 509967360ull (0x1e657c00ull)
>  volume.num_blocks = 996030 (0xf32be)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 3 (0x3)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  block.is_volume = true
>  block.minor = 3 (0x3)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda3'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  linux.sysfs_path_device = '/sys/block/hda/hda3'
>  linux.sysfs_path = '/sys/block/hda/hda3'
>
>  11: udi = '/org/freedesktop/Hal/devices/volume_part4_size_38461409280'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_38461409280'
>  volume.partition.msdos_part_table_type = 142 (0x8e)
>  info.product = 'Volume (LVM2_member)'
>  volume.size = 38461409280ull (0x8f47a8800ull)
>  volume.num_blocks = 75119940 (0x47a3d44)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 4 (0x4)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = 'LVM2 001'
>  volume.fsusage = 'raid'
>  volume.fstype = 'LVM2_member'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  block.is_volume = true
>  block.minor = 4 (0x4)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda4'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  linux.sysfs_path_device = '/sys/block/hda/hda4'
>  linux.sysfs_path = '/sys/block/hda/hda4'
>
>  12: udi = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR'
>  storage.firmware_version = '006C'
>  storage.serial = 'NP03T3C262WR'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'FUJITSU MHT2040AH'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  storage.drive_type = 'disk'
>  storage.vendor = ''
>  storage.model = 'FUJITSU MHT2040AH'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  13: udi = '/org/freedesktop/Hal/devices/storage_model_TEAC_CD_ROM_CD_224E'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'cdrom'
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrom'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_TEAC_CD_ROM_CD_224E'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_TEAC_CD_ROM_CD_224E'
>  storage.cdrom.write_speed = 0 (0x0)
>  storage.cdrom.read_speed = 4234 (0x108a)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = false
>  storage.cdrom.cdrw = false
>  storage.cdrom.cdr = false
>  storage.firmware_version = 'D.9D'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'TEAC CD-ROM CD-224E'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'TEAC CD-ROM CD-224E'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  linux.sysfs_path_device = '/sys/block/hdc'
>  linux.sysfs_path = '/sys/block/hdc'
>
>  14: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (vesafb.0)'
>  platform.id = 'vesafb.0'
>  info.linux.driver = 'vesafb'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/vesafb.0'
>  linux.sysfs_path = '/sys/devices/platform/vesafb.0'
>
>  15: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port_logicaldev_input'
>  input.product = 'SynPS/2 Synaptics TouchPad'
>  info.product = 'SynPS/2 Synaptics TouchPad'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.tablet' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  linux.sysfs_path = '/sys/class/input/input1/event1'
>
>  16: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.linux.driver = 'psmouse'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  17: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event0'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event0'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/input0/event0'
>
>  18: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  19: udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (i8042)'
>  platform.id = 'i8042'
>  info.linux.driver = 'i8042'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042'
>  linux.sysfs_path = '/sys/devices/platform/i8042'
>
>  20: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (serial8250)'
>  platform.id = 'serial8250'
>  info.linux.driver = 'serial8250'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/serial8250'
>  linux.sysfs_path = '/sys/devices/platform/serial8250'
>
>  21: udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (floppy.0)'
>  platform.id = 'floppy.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/floppy.0'
>  linux.sysfs_path = '/sys/devices/platform/floppy.0'
>
>  22: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  input.product = 'PC Speaker'
>  info.product = 'PC Speaker'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  linux.sysfs_path = '/sys/class/input/input2/event2'
>
>  23: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (pcspkr)'
>  platform.id = 'pcspkr'
>  info.linux.driver = 'pcspkr'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/pcspkr'
>  linux.sysfs_path = '/sys/devices/platform/pcspkr'
>
>  24: udi = '/org/freedesktop/Hal/devices/pci_8086_1a30'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1a30'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82845 845 (Brookdale) Chipset Host Bridge'
>  pci.product = '82845 845 (Brookdale) Chipset Host Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 6704 (0x1a30)
>  info.linux.driver = 'agpgart-intel'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  25: udi = '/org/freedesktop/Hal/devices/pci_10de_112'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_112'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = 'NV11 [GeForce2 Go]'
>  pci.product = 'NV11 [GeForce2 Go]'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 274 (0x112)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_1a31'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>
>  26: udi = '/org/freedesktop/Hal/devices/pci_8086_1a31'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1a31'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82845 845 (Brookdale) Chipset AGP Bridge'
>  pci.product = '82845 845 (Brookdale) Chipset AGP Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 6705 (0x1a31)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  27: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.16-rc4-3-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
>  linux.device_file = '/dev/bus/usb/001/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/001/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'
>
>  29: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.16-rc4-3-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.16-rc4-3-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2482'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>
>  30: udi = '/org/freedesktop/Hal/devices/pci_8086_2482'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2482'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801CA/CAM USB (Hub #1)'
>  pci.product = '82801CA/CAM USB (Hub #1)'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9346 (0x2482)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.16-rc4-3-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>
>  32: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
>  linux.device_file = '/dev/bus/usb/002/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/002/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'
>
>  33: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.16-rc4-3-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.16-rc4-3-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2484'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>
>  34: udi = '/org/freedesktop/Hal/devices/pci_8086_2484'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2484'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801CA/CAM USB (Hub #2)'
>  pci.product = '82801CA/CAM USB (Hub #2)'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9348 (0x2484)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>
>  35: udi = '/org/freedesktop/Hal/devices/net_00_0b_db_15_95_c8'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_0b_db_15_95_c8'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 50920265160ull (0xbdb1595c8ull)
>  info.product = 'Networking Interface'
>  net.interface_up = false
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 2 (0x2)
>  net.address = '00:0b:db:15:95:c8'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_10b7_9200'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b7_9200'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '3c905C-TX/TX-M [Tornado]'
>  pci.product = '3c905C-TX/TX-M [Tornado]'
>  info.vendor = '3Com Corporation'
>  pci.vendor = '3Com Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 4279 (0x10b7)
>  pci.product_id = 37376 (0x9200)
>  info.linux.driver = '3c59x'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_1217_6972'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1217_6972'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = 'OZ601/6912/711E0 CardBus/SmartCardBus Controller'
>  pci.product = 'OZ601/6912/711E0 CardBus/SmartCardBus Controller'
>  info.vendor = 'O2 Micro, Inc.'
>  pci.vendor = 'O2 Micro, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 7 (0x7)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 4631 (0x1217)
>  pci.product_id = 26994 (0x6972)
>  info.linux.driver = 'yenta_cardbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801 Mobile PCI Bridge'
>  pci.product = '82801 Mobile PCI Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9288 (0x2448)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_8086_248c'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248c'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801CAM ISA Bridge (LPC)'
>  pci.product = '82801CAM ISA Bridge (LPC)'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9356 (0x248c)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>
>  41: udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 1 (0x1)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801CAM IDE U100'
>  pci.product = '82801CAM IDE U100'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9354 (0x248a)
>  info.linux.driver = 'PIIX_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>
>  43: udi = '/org/freedesktop/Hal/devices/pci_8086_2483'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2483'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801CA/CAM SMBus Controller'
>  pci.product = '82801CA/CAM SMBus Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9347 (0x2483)
>  info.linux.driver = 'i801_smbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>
>  44: udi = '/org/freedesktop/Hal/devices/pci_8086_2485'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2485'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00f3)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801CA/CAM AC'97 Audio Controller'
>  pci.product = '82801CA/CAM AC'97 Audio Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 243 (0xf3)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9349 (0x2485)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.5'
>
>  45: udi = '/org/freedesktop/Hal/devices/pci_8086_2486'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2486'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5422)'
>  pci.subsys_vendor = 'Conexant'
>  info.product = '82801CA/CAM AC'97 Modem Controller'
>  pci.product = '82801CA/CAM AC'97 Modem Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 7 (0x7)
>  pci.subsys_vendor_id = 5361 (0x14f1)
>  pci.subsys_product_id = 21538 (0x5422)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9350 (0x2486)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.6'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.6'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.6'
>
>  46: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PCI Bus'
>  pnp.description = 'PCI Bus'
>  pnp.id = 'PNP0a03'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  47: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  48: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  49: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  50: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  51: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.id = 'PNP0303'
>  info.linux.driver = 'i8042 kbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  52: udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PS/2 Port for PS/2-style Mice'
>  pnp.description = 'PS/2 Port for PS/2-style Mice'
>  pnp.id = 'PNP0f13'
>  info.linux.driver = 'i8042 aux'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  53: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PC standard floppy disk controller'
>  pnp.description = 'PC standard floppy disk controller'
>  pnp.id = 'PNP0700'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  54: udi = '/org/freedesktop/Hal/devices/computer'
>  info.callouts.add = { 'hal-system-storage-cleanup-mountpoints' }
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', '', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = 'Inspiron 2650 Revision A0'
>  system.vendor = 'Dell Computer Corporation'
>  smbios.chassis.type = 'Other'
>  smbios.chassis.manufacturer = 'Dell Computer Corporation'
>  smbios.system.uuid = '44454C4C-5400-124D-8557-4AC04F4A3231'
>  smbios.system.serial = 'JTMWJ21'
>  smbios.system.version = 'Revision A0'
>  smbios.system.product = 'Inspiron 2650'
>  smbios.system.manufacturer = 'Dell Computer Corporation'
>  smbios.bios.release_date = '03/23/2004'
>  smbios.bios.version = 'A13'
>  smbios.bios.vendor = 'PHOENIX TECHNOLOGIES LTD.'
>  power_management.can_suspend_to_disk = true
>  power_management.can_suspend_to_ram = true
>  power_management.acpi.linux.version = '20060127'
>  power_management.type = 'acpi'
>  system.formfactor = 'unknown'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.16-rc4-3-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 1 disks
>  bios: 636k low mem
>/dev/mem[0x9f000, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9f000, 2048]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00800 bytes at 0x9f000
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf6770 - 0xf678e -----
>  f6770  5f 53 4d 5f 25 1f 02 03 59 00 00 00 00 00 00 00  "_SM_%...Y......."
>  f6780  5f 44 4d 49 5f 73 a4 03 10 f0 0d 00 1e 00 23  "_DMI_s........#"
>----- SMBIOS Entry Point end -----
>/dev/mem[0xdf010, 932]: mmap(, 4096,,,, 0xdf000) ok
>----- SMBIOS Structure Table 0xdf010 - 0xdf3b3 -----
>  df010  d0 0a 00 00 01 04 f3 00 00 00 00 00 d4 11 01 00  "................"
>  df020  70 00 71 00 00 00 00 00 5c 00 7d fe 01 00 00 da  "p.q.....\.}....."
>  df030  11 02 00 b2 00 de 00 00 00 00 00 00 00 00 ff ff  "................"
>  df040  00 00 de 0d 03 00 01 02 ff ff 00 00 00 00 00 00  "................"
>  df050  00 00 14 04 00 01 02 af e6 03 07 90 9b 0d 7c 00  "..............|."
>  df060  00 00 00 87 01 50 48 4f 45 4e 49 58 20 54 45 43  ".....PHOENIX TEC"
>  df070  48 4e 4f 4c 4f 47 49 45 53 20 4c 54 44 2e 00 41  "HNOLOGIES LTD..A"
>  df080  31 33 00 30 33 2f 32 33 2f 32 30 30 34 00 00 01  "13.03/23/2004..."
>  df090  19 05 00 01 02 03 04 44 45 4c 4c 54 00 12 4d 85  ".......DELLT..M."
>  df0a0  57 4a c0 4f 4a 32 31 06 44 65 6c 6c 20 43 6f 6d  "WJ.OJ21.Dell Com"
>  df0b0  70 75 74 65 72 20 43 6f 72 70 6f 72 61 74 69 6f  "puter Corporatio"
>  df0c0  6e 00 49 6e 73 70 69 72 6f 6e 20 32 36 35 30 00  "n.Inspiron 2650."
>  df0d0  52 65 76 69 73 69 6f 6e 20 41 30 00 4a 54 4d 57  "Revision A0.JTMW"
>  df0e0  4a 32 31 20 20 20 00 00 02 08 06 00 01 02 03 04  "J21   .........."
>  df0f0  44 65 6c 6c 20 43 6f 6d 70 75 74 65 72 20 43 6f  "Dell Computer Co"
>  df100  72 70 6f 72 61 74 69 6f 6e 00 49 6e 73 70 69 72  "rporation.Inspir"
>  df110  6f 6e 20 32 36 35 30 00 4e 6f 6e 65 00 4e 6f 6e  "on 2650.None.Non"
>  df120  65 00 00 03 11 07 00 01 01 02 03 04 03 03 03 03  "e..............."
>  df130  34 12 00 00 44 65 6c 6c 20 43 6f 6d 70 75 74 65  "4...Dell Compute"
>  df140  72 20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 4e 2f  "r Corporation.N/"
>  df150  41 00 4a 54 4d 57 4a 32 31 20 20 20 00 4e 6f 20  "A.JTMWJ21   .No "
>  df160  41 73 73 65 74 20 54 61 67 00 00 04 23 08 00 01  "Asset Tag...#..."
>  df170  03 b2 02 27 0f 00 00 ff f9 eb bf 03 8c 64 00 40  "...'.........d.@"
>  df180  06 40 06 41 04 0c 00 0d 00 ff ff 00 00 00 55 34  ".@.A..........U4"
>  df190  39 00 49 6e 74 65 6c 00 42 30 00 00 05 14 09 00  "9.Intel.B0......"
>  df1a0  03 04 03 03 09 0c 00 00 04 02 02 06 00 07 00 04  "................"
>  df1b0  00 00 06 0c 0a 00 01 01 00 00 05 88 88 00 4d 31  "..............M1"
>  df1c0  00 00 06 0c 0b 00 01 23 00 00 05 07 07 00 4d 32  ".......#......M2"
>  df1d0  00 00 07 13 0c 00 01 88 01 10 00 10 00 58 00 40  ".............X.@"
>  df1e0  00 00 02 02 02 4c 31 20 43 61 63 68 65 00 00 07  ".....L1 Cache..."
>  df1f0  13 0d 00 01 89 01 00 02 00 01 58 00 08 00 00 02  "..........X....."
>  df200  02 02 4c 32 20 43 61 63 68 65 00 00 08 09 0e 00  "..L2 Cache......"
>  df210  01 19 02 05 05 4a 50 34 00 50 61 72 61 6c 6c 65  ".....JP4.Paralle"
>  df220  6c 00 00 08 09 0f 00 01 00 02 07 1c 4a 50 33 00  "l...........JP3."
>  df230  53 56 47 41 2d 4f 75 74 00 00 08 09 10 00 01 00  "SVGA-Out........"
>  df240  02 12 10 4a 50 31 2f 4a 50 39 00 55 53 42 00 00  "...JP1/JP9.USB.."
>  df250  09 0d 11 00 01 07 05 02 01 00 00 26 02 4f 5a 36  "...........&.OZ6"
>  df260  39 31 32 00 00 0a 08 12 00 83 01 87 02 6e 56 49  "912..........nVI"
>  df270  44 49 41 20 4e 56 31 31 4d 00 53 69 67 6d 74 65  "DIA NV11M.Sigmte"
>  df280  6c 20 53 54 41 43 39 37 30 30 00 00 0b 05 13 00  "l STAC9700......"
>  df290  03 44 65 6c 6c 20 53 79 73 74 65 6d 00 31 5b 46  ".Dell System.1[F"
>  df2a0  33 5d 00 33 5b 31 2e 31 5d 00 00 0c 05 14 00 00  "3].3[1.1]......."
>  df2b0  00 00 10 0f 15 00 03 03 03 00 00 08 00 fe ff 02  "................"
>  df2c0  00 00 00 11 1b 16 00 15 00 ff ff 40 00 40 00 00  "...........@.@.."
>  df2d0  01 0d 01 01 02 12 80 00 00 00 00 00 00 00 4a 36  "..............J6"
>  df2e0  41 00 53 4f 20 44 49 4d 4d 20 30 00 00 11 1b 17  "A.SO DIMM 0....."
>  df2f0  00 15 00 ff ff 40 00 40 00 80 00 0d 01 01 02 12  ".....@.@........"
>  df300  80 00 00 00 00 00 00 00 4a 37 41 00 53 4f 20 44  "........J7A.SO D"
>  df310  49 4d 4d 20 31 00 00 13 0f 18 00 00 00 00 00 ff  "IMM 1..........."
>  df320  ff 05 00 15 00 04 00 00 14 13 19 00 00 00 00 00  "................"
>  df330  ff ff 03 00 16 00 18 00 04 00 00 00 00 15 07 1a  "................"
>  df340  00 07 04 02 00 00 16 1a 1b 00 01 02 00 00 02 02  "................"
>  df350  40 e7 d0 39 06 01 7a 06 61 2b 07 0a 00 00 00 00  "@..9..z.a+......"
>  df360  31 73 74 20 42 61 74 74 65 72 79 00 53 41 4e 59  "1st Battery.SANY"
>  df370  4f 20 20 20 20 20 00 31 32 2f 31 32 2f 32 30 30  "O     .12/12/200"
>  df380  31 00 30 30 31 38 00 43 50 4c 2d 31 37 00 31 2e  "1.0018.CPL-17.1."
>  df390  31 00 4c 49 4f 4e 00 00 20 14 1c 00 00 00 00 00  "1.LION.. ......."
>  df3a0  00 00 0c 01 02 03 04 05 06 07 08 09 00 00 7f 04  "................"
>  df3b0  1d 00 00 00  "...."
>----- SMBIOS Structure Table end -----
>  type 0xd0 [0x0000]: d0 0a 00 00 01 04 f3 00 00 00
>  type 0xd4 [0x0001]: d4 11 01 00 70 00 71 00 00 00 00 00 5c 00 7d fe 01
>  type 0xda [0x0002]: da 11 02 00 b2 00 de 00 00 00 00 00 00 00 00 ff ff
>  type 0xde [0x0003]: de 0d 03 00 01 02 ff ff 00 00 00 00 00
>  type 0x00 [0x0004]: 00 14 04 00 01 02 af e6 03 07 90 9b 0d 7c 00 00 00 00 87 01
>       str1: "PHOENIX TECHNOLOGIES LTD."
>       str2: "A13"
>       str3: "03/23/2004"
>  type 0x01 [0x0005]: 01 19 05 00 01 02 03 04 44 45 4c 4c 54 00 12 4d 85 57 4a c0 4f 4a 32 31 06
>       str1: "Dell Computer Corporation"
>       str2: "Inspiron 2650"
>       str3: "Revision A0"
>       str4: "JTMWJ21"
>  type 0x02 [0x0006]: 02 08 06 00 01 02 03 04
>       str1: "Dell Computer Corporation"
>       str2: "Inspiron 2650"
>       str3: "None"
>       str4: "None"
>  type 0x03 [0x0007]: 03 11 07 00 01 01 02 03 04 03 03 03 03 34 12 00 00
>       str1: "Dell Computer Corporation"
>       str2: "N/A"
>       str3: "JTMWJ21"
>       str4: "No Asset Tag"
>  type 0x04 [0x0008]: 04 23 08 00 01 03 b2 02 27 0f 00 00 ff f9 eb bf 03 8c 64 00 40 06 40 06 41 04 0c 00 0d 00 ff ff 00 00 00
>       str1: "U49"
>       str2: "Intel"
>       str3: "B0"
>  type 0x05 [0x0009]: 05 14 09 00 03 04 03 03 09 0c 00 00 04 02 02 06 00 07 00 04
>  type 0x06 [0x000a]: 06 0c 0a 00 01 01 00 00 05 88 88 00
>       str1: "M1"
>  type 0x06 [0x000b]: 06 0c 0b 00 01 23 00 00 05 07 07 00
>       str1: "M2"
>  type 0x07 [0x000c]: 07 13 0c 00 01 88 01 10 00 10 00 58 00 40 00 00 02 02 02
>       str1: "L1 Cache"
>  type 0x07 [0x000d]: 07 13 0d 00 01 89 01 00 02 00 01 58 00 08 00 00 02 02 02
>       str1: "L2 Cache"
>  type 0x08 [0x000e]: 08 09 0e 00 01 19 02 05 05
>       str1: "JP4"
>       str2: "Parallel"
>  type 0x08 [0x000f]: 08 09 0f 00 01 00 02 07 1c
>       str1: "JP3"
>       str2: "SVGA-Out"
>  type 0x08 [0x0010]: 08 09 10 00 01 00 02 12 10
>       str1: "JP1/JP9"
>       str2: "USB"
>  type 0x09 [0x0011]: 09 0d 11 00 01 07 05 02 01 00 00 26 02
>       str1: "OZ6912"
>  type 0x0a [0x0012]: 0a 08 12 00 83 01 87 02
>       str1: "nVIDIA NV11M"
>       str2: "Sigmtel STAC9700"
>  type 0x0b [0x0013]: 0b 05 13 00 03
>       str1: "Dell System"
>       str2: "1[F3]"
>       str3: "3[1.1]"
>  type 0x0c [0x0014]: 0c 05 14 00 00
>  type 0x10 [0x0015]: 10 0f 15 00 03 03 03 00 00 08 00 fe ff 02 00
>  type 0x11 [0x0016]: 11 1b 16 00 15 00 ff ff 40 00 40 00 00 01 0d 01 01 02 12 80 00 00 00 00 00 00 00
>       str1: "J6A"
>       str2: "SO DIMM 0"
>  type 0x11 [0x0017]: 11 1b 17 00 15 00 ff ff 40 00 40 00 80 00 0d 01 01 02 12 80 00 00 00 00 00 00 00
>       str1: "J7A"
>       str2: "SO DIMM 1"
>  type 0x13 [0x0018]: 13 0f 18 00 00 00 00 00 ff ff 05 00 15 00 04
>  type 0x14 [0x0019]: 14 13 19 00 00 00 00 00 ff ff 03 00 16 00 18 00 04 00 00
>  type 0x15 [0x001a]: 15 07 1a 00 07 04 02
>  type 0x16 [0x001b]: 16 1a 1b 00 01 02 00 00 02 02 40 e7 d0 39 06 01 7a 06 61 2b 07 0a 00 00 00 00
>       str1: "1st Battery"
>       str2: "SANYO"
>       str3: "12/12/2001"
>       str4: "0018"
>       str5: "CPL-17"
>       str6: "1.1"
>       str7: "LION"
>  type 0x20 [0x001c]: 20 14 1c 00 00 00 00 00 00 00 0c 01 02 03 04 05 06 07 08 09
>  type 0x7f [0x001d]: 7f 04 1d 00
>  smbios: stopped at end tag
>>> bios.3: smp
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>----- BIOS data 0x00400 - 0x004ff -----
>  400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9f  "................"
>  410  27 00 00 7c 02 28 00 00 00 00 1e 00 1e 00 00 00  "'..|.(.........."
>  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80  "................"
>  440  1d 00 ff 01 00 00 00 e0 c8 72 80 00 ff ff 00 00  ".........r......"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 03 00 00 ce 00 e2 6b 03 00  ".....)0......k.."
>  470  00 00 00 00 01 01 00 00 14 14 14 00 01 01 01 01  "................"
>  480  1e 00 3e 00 2f 10 00 60 09 11 0b 81 50 00 00 04  "..>./..`....P..."
>  490  01 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 d3 69 00 c0 00 00 00 00  ".........i......"
>  4b0  00 00 00 00 00 00 00 1a 00 00 00 00 00 00 00 00  "................"
>  4c0  40 01 00 01 40 04 f0 01 f6 03 e0 00 0e 10 08 04  "@...@..........."
>  4d0  1f 0a 00 00 10 d3 84 00 c8 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9f000 - 0x9f7ff -----
>  9f000  02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f010  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f020  00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00  "................"
>  9f030  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f040  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f050  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f060  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f070  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f080  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f090  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f0a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f0b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f0c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f0d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f0e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f0f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f100  00 00 00 00 ca 02 40 05 00 00 00 00 00 00 00 00  "......@........."
>  9f110  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f120  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f130  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f140  f9 00 40 18 00 00 40 18 00 00 00 00 00 00 00 00  "..@...@........."
>  9f150  00 02 00 00 00 0d 00 00 00 90 00 00 80 00 01 00  "................"
>  9f160  00 0d 09 00 00 02 00 80 00 00 00 00 00 00 00 00  "................"
>  9f170  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f180  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f190  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f1a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f1b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f1c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f1d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f1e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f1f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f200  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f210  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f220  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f230  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f240  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f250  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f260  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f270  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f280  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f290  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f2a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f2b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f2c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f2d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f2e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f2f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f300  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f310  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f320  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f330  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f340  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f350  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f360  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f370  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f380  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f390  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f3a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f3b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f3c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f3d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f3e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f3f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f410  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f440  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f460  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f470  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f480  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f490  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f500  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f510  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f520  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f530  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f540  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f550  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f560  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f570  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f580  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f590  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f600  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f610  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f620  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f630  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f640  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f650  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f660  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f670  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f680  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f690  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f700  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f710  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f720  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f730  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f740  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f750  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f760  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f770  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f780  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f790  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 57344]: mmap(, 57344,,,, 0xc0000) ok
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:1288: e8 19 00 73 11 fc e8 25
>>> bios.4.1: vbe info
>>> bios.5: 32
>  bios32: valid SD header at 0xf6790 (size 0x10, rev 0), SD at 0xfd7a0
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.16-rc4-3-default (geeko@buildhost) (gcc version 4.1.0 20060218 (prerelease) (SUSE Linux)) #1 Mon Feb 20 15:56:05 UTC 2006
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
>  <4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
>  <4> BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
>  <4> BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
>  <4> BIOS-e820: 0000000017f00000 - 0000000017f80000 (usable)
>  <4> BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
>  <4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
>  <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>383MB LOWMEM available.
>  <6>No mptable found.
>  <7>On node 0 totalpages: 98176
>  <7>  DMA zone: 4096 pages, LIFO batch:0
>  <7>  DMA32 zone: 0 pages, LIFO batch:0
>  <7>  Normal zone: 94080 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:0
>  <6>DMI 2.3 present.
>  <6>APIC enabled because system is MP or new enough
>  <7>ACPI: RSDP (v000 DELL                                  ) @ 0x000f6740
>  <7>ACPI: RSDT (v001 DELL     RSDT   0x06040000  LTP 0x00000000) @ 0x17efadcf
>  <7>ACPI: FADT (v001 INTEL  845M     0x06040000 PTL  0x0000004b) @ 0x17efef8c
>  <7>ACPI: DSDT (v001 DELL   845M     0x06040000 MSFT 0x0100000d) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0x1008
>  <4>Allocating PCI resources starting at 20000000 (gap: 18000000:e7800000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda3  splash=silent
>  <6>bootsplash: silent mode.
>  <4>Local APIC disabled by BIOS -- reenabling.
>  <4>Found and enabled local APIC!
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 2048 (order: 11, 32768 bytes)
>  <4>Detected 1595.462 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>  <6>Memory: 383304k/392704k available (1553k kernel code, 8692k reserved, 625k data, 160k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 3197.09 BogoMIPS (lpj=6394196)
>  <6>Security Framework v1.0.0 initialized
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
>  <7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
>  <6>CPU: Trace cache: 12K uops, L1 D cache: 8K
>  <6>CPU: L2 cache: 256K
>  <7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000400 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>  <6>CPU0: Thermal monitoring enabled
>  <4>CPU: Intel Mobile Intel(R) Celeron(R) CPU 1.60GHz stepping 07
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 2441k freed
>  <4> not found!
>  <4>ACPI: setting ELCR to 0200 (from 0c00)
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=2
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20060127
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using PIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <7>PCI: Probing PCI hardware (bus 00)
>  <4>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>  <4>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>  <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>  <7>Boot video device is 0000:01:00.0
>  <6>PCI: Transparent bridge - 0000:00:1e.0
>  <4>PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>  <6>ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 8 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>pnp: 00:04: ioport range 0x600-0x60f has been reserved
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: disabled.
>  <6>  MEM window: e0000000-e7ffffff
>  <6>  PREFETCH window: f0000000-f7ffffff
>  <4>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  <4>  IO window: 00003400-000034ff
>  <4>  IO window: 00003800-000038ff
>  <4>  PREFETCH window: 20000000-21ffffff
>  <4>  MEM window: 24000000-25ffffff
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: 3000-3fff
>  <6>  MEM window: e8000000-e80fffff
>  <6>  PREFETCH window: 20000000-22ffffff
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>  <7>PCI: setting IRQ 10 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <5>audit(1141097120.304:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered (default)
>  <6>vesafb: framebuffer at 0xf0000000, mapped to 0xd8880000, using 6144k, total 16384k
>  <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>  <6>vesafb: protected mode interface info at c000:da90
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 80290 bytes,<6>...found (1024x768, 32624 bytes, v3).
>  <4>Console: switching to colour frame buffer device 93x45
>  <6>fb0: VESA VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12ac
>  <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>  <6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a National Semiconductor PC87306
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: AT Translated Set 2 keyboard as /class/input/input0
>  <6>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
>  <6>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>  <6>input: PC Speaker as /class/input/input2
>  <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 4.39
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>  <4>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>  <4>TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
>  <6>TCP: Hash tables configured (established 16384 bind 16384)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <4>ACPI wakeup devices: 
>  <4>ELAN USB0 USB1 USB2 MODM 
>  <6>ACPI: (supports S0 S1 S3 S4 S5)
>  <6>Freeing unused kernel memory: 160k freed
>  <4>Write protecting the kernel read-only data: 286k
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <6>ICH3M: IDE controller at PCI slot 0000:00:1f.1
>  <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>  <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>  <7>PCI: setting IRQ 11 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>  <6>ICH3M: chipset revision 2
>  <6>ICH3M: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: FUJITSU MHT2040AH, ATA DISK drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: max request size: 128KiB
>  <6>hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
>  <6>hda: cache flushes supported
>  <6> hda: hda1 hda2 hda3 hda4
>  <7>Probing IDE interface ide1...
>  <4>hdc: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive
>  <4>ide1 at 0x170-0x177,0x376 on irq 15
>  <6>ACPI: CPU0 (power states: C1[C1] C2[C2])
>  <6>ACPI: Processor [CPU0] (supports 8 throttling states)
>  <4>Attempting manual resume
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on hda2, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>Adding 498004k swap on /dev/hda3.  Priority:-1 extents:1 across:498004k
>  <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>  <6>USB Universal Host Controller Interface driver v2.3
>  <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>  <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>  <6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>  <6>usb usb1: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb1: Product: UHCI Host Controller
>  <6>usb usb1: Manufacturer: Linux 2.6.16-rc4-3-default uhci_hcd
>  <6>usb usb1: SerialNumber: 0000:00:1d.0
>  <6>usb usb1: configuration #1 chosen from 1 choice
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 2 ports detected
>  <6>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <6>hw_random hardware driver 1.0.0 loaded
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>  <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>  <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>  <6>usb usb2: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb2: Product: UHCI Host Controller
>  <6>usb usb2: Manufacturer: Linux 2.6.16-rc4-3-default uhci_hcd
>  <6>usb usb2: SerialNumber: 0000:00:1d.1
>  <6>usb usb2: configuration #1 chosen from 1 choice
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <6>agpgart: Detected an Intel i845 Chipset.
>  <6>agpgart: AGP aperture is 64M @ 0xec000000
>  <6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>  <6>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <6>Yenta: CardBus bridge found at 0000:02:04.0 [1028:00f3]
>  <6>Yenta O2: res at 0x94/0xD4: 00/c8
>  <6>Yenta O2: enabling read prefetch/write burst
>  <6>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>  <6>Socket status: 30000007
>  <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>  <6>cs: IO port probe 0x3000-0x3fff: clean.
>  <6>pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xe80fffff
>  <6>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x22ffffff
>  <4>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>  <6>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>  <4>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>  <6>0000:02:01.0: 3Com PCI 3c905C Tornado at d887e000. Vers LK1.1.19
>  <6>cs: IO port probe 0x100-0x3af: clean.
>  <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>  <6>cs: IO port probe 0x820-0x8ff: clean.
>  <6>cs: IO port probe 0xc00-0xcf7: clean.
>  <6>cs: IO port probe 0xa00-0xaff: clean.
>  <6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>  <7>dm-netlink version 0.0.2 loaded
>  <6>loop: loaded (max 8 devices)
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on hda1, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on dm-0, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on dm-1, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on dm-2, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>  <5>audit(1141097138.025:2): AppArmor (version 2.0-19.43r6152) initialized
>  <4>
>  <6>ACPI: AC Adapter [ACAD] (on-line)
>  <6>ACPI: Battery Slot [BAT1] (battery present)
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>ACPI: Lid Switch [LID]
>  <6>ACPI: Power Button (CM) [PWRB]
>  <6>ACPI: Sleep Button (CM) [SLPB]
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <6>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>  <6>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>  <6>microcode: CPU0 updated from revision 0x29 to 0x39, date = 06042003 
>  <6>IA-32 Microcode Update Driver v1.14 unregistered
>  <6>powernow: This module only works with AMD K7 CPUs
>  <6>NET: Registered protocol family 10
>  <6>lo: Disabled Privacy Extensions
>  <6>IPv6 over IPv4 tunneling driver
>  <7>eth0: no IPv6 routers present
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>lp: driver loaded but no devices found
>  <5>SCSI subsystem initialized
>  <6>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>  <4>hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
>  <4>hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>  <4>ide: failed opcode was: unknown
>  <6>NET: Registered protocol family 17
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc " -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: open(/dev/fd0) failed
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  0170-0177 : ide1
>  01f0-01f7 : ide0
>  0376-0376 : ide1
>  03c0-03df : vesafb
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  0600-060f : pnp 00:04
>  0cf8-0cff : PCI conf1
>  1000-107f : 0000:00:1f.0
>    1000-107f : motherboard
>      1000-1003 : PM1a_EVT_BLK
>      1004-1005 : PM1a_CNT_BLK
>      1008-100b : PM_TMR
>      1010-1015 : ACPI CPU throttle
>      1020-1020 : PM2_CNT_BLK
>      1028-102b : GPE0_BLK
>      102c-102f : GPE1_BLK
>      1060-106f : i8xx TCO
>  1180-11bf : 0000:00:1f.0
>    1180-11bf : motherboard
>  1200-120f : motherboard
>  1800-181f : 0000:00:1d.0
>    1800-181f : uhci_hcd
>  1820-183f : 0000:00:1d.1
>    1820-183f : uhci_hcd
>  1840-184f : 0000:00:1f.1
>    1840-1847 : ide0
>    1848-184f : ide1
>  1860-187f : 0000:00:1f.3
>    1860-1867 : i801_smbus
>  1880-18bf : 0000:00:1f.5
>  1c00-1cff : 0000:00:1f.5
>  2000-207f : 0000:00:1f.6
>  2400-24ff : 0000:00:1f.6
>  3000-3fff : PCI Bus #02
>    3000-307f : 0000:02:01.0
>    3400-34ff : PCI CardBus #03
>    3800-38ff : PCI CardBus #03
>  fe00-fe01 : motherboard
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:      48972          XT-PIC  timer
>    1:        290          XT-PIC  i8042
>    2:          0          XT-PIC  cascade
>    6:         10          XT-PIC  floppy
>    8:          2          XT-PIC  rtc
>    9:        944          XT-PIC  acpi
>   10:         42          XT-PIC  uhci_hcd:usb1, yenta, eth0
>   11:          0          XT-PIC  uhci_hcd:usb2
>   12:        110          XT-PIC  i8042
>   14:       7444          XT-PIC  ide0
>   15:       1592          XT-PIC  ide1
>  NMI:          0 
>  LOC:      48844 
>  ERR:          0
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 15
>  model		: 2
>  model name	: Mobile Intel(R) Celeron(R) CPU 1.60GHz
>  stepping	: 7
>  cpu MHz		: 1595.462
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
>  bogomips	: 3197.09
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x17f80000
>  klog mem 0: 0x17652000
>  klog mem 1: 0x0
>  klog mem:   0x17652000
> -- <4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> -- <4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
> -- <4> BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
> -- <4> BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
> -- <4> BIOS-e820: 0000000017f00000 - 0000000017f80000 (usable)
> -- <4> BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
> -- <4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> -- <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0x17f0f000
>  meminfo:    0x1791d000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0x2ae3af0afe5dfce4) -----
>     i2c_adapter: /module/i2c_core
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>       ide-cdrom: /module/ide_cd
>        ide-disk: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        ide-disk: /module/ide_disk
>           3c59x: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
>           3c59x: /module/3c59x
>         PCI_IDE: /module/generic
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>        PIIX_IDE: /module/piix
>   agpgart-intel: /devices/pci0000:00/0000:00:00.0
>   agpgart-intel: /module/intel_agp
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>      i801_smbus: /module/i2c_i801
>      parport_pc: /module/parport_pc
>          shpchp: /module/shpchp
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
>        uhci_hcd: /module/uhci_hcd
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>   yenta_cardbus: /module/yenta_socket
>           i8042: /devices/platform/i8042
>          pcspkr: /devices/platform/pcspkr
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:06
>       i8042 kbd: /devices/pnp0/00:05
>          system: /devices/pnp0/00:04
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>             hub: /module/usbcore
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /devices/pci0000:00/0000:00:1d.1/usb2
>             usb: /module/usbcore
>           usbfs: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00008086d00001A30sv00001028sd000000F3bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x8086
>    device = 0x1a30
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 0
>    res[0] = 0xec000000 0xefffffff 0x1208
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v00008086d00001A31sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x1a31
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1d.0, bus_id = 0000:00:1d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.0
>    modalias = "pci:v00008086d00002482sv00001028sd000000F3bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2482
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 10
>    res[4] = 0x1800 0x181f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.1, bus_id = 0000:00:1d.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.1
>    modalias = "pci:v00008086d00002484sv00001028sd000000F3bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2484
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 11
>    res[4] = 0x1820 0x183f 0x101
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    modalias = "pci:v00008086d00002448sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2448
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.0, bus_id = 0000:00:1f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.0
>    modalias = "pci:v00008086d0000248Csv00000000sd00000000bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x8086
>    device = 0x248c
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.1, bus_id = 0000:00:1f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.1
>    modalias = "pci:v00008086d0000248Asv00001028sd000000F3bc01sc01i8a
>"
>    class = 0x1018a
>    vendor = 0x8086
>    device = 0x248a
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 11
>    res[4] = 0x1840 0x184f 0x101
>    res[5] = 0x23000000 0x230003ff 0x200
>    config[64]
>  pci device: name = 0000:00:1f.3, bus_id = 0000:00:1f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.3
>    modalias = "pci:v00008086d00002483sv00001028sd000000F3bc0Csc05i00
>"
>    class = 0xc0500
>    vendor = 0x8086
>    device = 0x2483
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 10
>    res[4] = 0x1860 0x187f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.5, bus_id = 0000:00:1f.5, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.5
>    modalias = "pci:v00008086d00002485sv00001028sd000000F3bc04sc01i00
>"
>    class = 0x40100
>    vendor = 0x8086
>    device = 0x2485
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 10
>    res[0] = 0x1c00 0x1cff 0x101
>    res[1] = 0x1880 0x18bf 0x101
>    config[64]
>  pci device: name = 0000:00:1f.6, bus_id = 0000:00:1f.6, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.6
>    modalias = "pci:v00008086d00002486sv000014F1sd00005422bc07sc03i00
>"
>    class = 0x70300
>    vendor = 0x8086
>    device = 0x2486
>    subvendor = 0x14f1
>    subdevice = 0x5422
>    irq = 10
>    res[0] = 0x2400 0x24ff 0x101
>    res[1] = 0x2000 0x207f 0x101
>    config[64]
>  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>    modalias = "pci:v000010DEd00000112sv00001028sd000000F3bc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x10de
>    device = 0x112
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 10
>    res[0] = 0xe0000000 0xe0ffffff 0x200
>    res[1] = 0xf0000000 0xf7ffffff 0x1208
>    res[6] = 0xe1000000 0xe100ffff 0x7202
>    config[64]
>  pci device: name = 0000:02:01.0, bus_id = 0000:02:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
>    modalias = "pci:v000010B7d00009200sv00001028sd000000F3bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x10b7
>    device = 0x9200
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 10
>    res[0] = 0x3000 0x307f 0x101
>    res[1] = 0xe8000000 0xe800007f 0x200
>    res[6] = 0x22000000 0x2201ffff 0x7200
>    config[64]
>  pci device: name = 0000:02:04.0, bus_id = 0000:02:04.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>    modalias = "pci:v00001217d00006972sv00001028sd000000F3bc06sc07i00
>"
>    class = 0x60700
>    vendor = 0x1217
>    device = 0x6972
>    subvendor = 0x1028
>    subdevice = 0xf3
>    irq = 10
>    res[0] = 0xe8001000 0xe8001fff 0x200
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:1a30:1028:00f3:05
>class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0
>  addr0 ec000000, size 04000000
>  00: 86 80 30 1a 06 01 90 20 05 00 00 06 00 00 00 00  "..0.... ........"
>  10: 08 00 00 ec 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "............(..."
>  30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 00 00 00 00 09 a0  "......"
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:1a31:0000:0000:05
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 31 1a 07 01 a0 00 05 00 04 06 00 60 01 00  "..1..........`.."
>  10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 a0 22  "...........@...""
>  20: 00 e0 f0 e7 00 f0 f0 f7 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00  "................"
>
>bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:2482:1028:00f3:02
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 00001800, size 00000020
>  00: 86 80 82 24 05 00 80 02 02 00 03 0c 00 00 80 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 18 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00  "................"
>
>bus 00, slot 1d, func 1, vend:dev:s_vend:s_dev:rev 8086:2484:1028:00f3:02
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 11
>  addr4 00001820, size 00000020
>  00: 86 80 84 24 05 00 80 02 02 00 03 0c 00 00 00 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 21 18 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "!...........(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00  "................"
>
>bus 00->02, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:2448:0000:0000:42
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 48 24 07 01 80 00 42 00 04 06 00 00 01 00  "..H$....B......."
>  10: 00 00 00 00 00 00 00 00 00 02 02 a8 30 30 80 22  "............00.""
>  20: 00 e8 00 e8 00 20 f0 22 00 00 00 00 00 00 00 00  "..... ."........"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00  "................"
>
>bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:248c:0000:0000:02
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 8c 24 0f 00 80 02 02 00 01 06 00 00 80 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:248a:1028:00f3:02
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 11
>  addr4 00001840, size 00000010
>  addr5 23000000, size 00000400
>  00: 86 80 8a 24 07 00 80 02 02 8a 01 01 00 00 00 00  "...$............"
>  10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00  "................"
>  20: 41 18 00 00 00 00 00 23 00 00 00 00 28 10 f3 00  "A......#....(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00  "................"
>
>bus 00, slot 1f, func 3, vend:dev:s_vend:s_dev:rev 8086:2483:1028:00f3:02
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 00001860, size 00000020
>  00: 86 80 83 24 01 00 80 02 02 00 05 0c 00 00 00 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 61 18 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "a...........(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00  "................"
>
>bus 00, slot 1f, func 5, vend:dev:s_vend:s_dev:rev 8086:2485:1028:00f3:02
>class 04, sub_class 01 prog_if 00, hdr 0, flags <>, irq 10
>  addr0 00001c00, size 00000100
>  addr1 00001880, size 00000040
>  00: 86 80 85 24 05 00 80 02 02 00 01 04 00 00 00 00  "...$............"
>  10: 01 1c 00 00 81 18 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00  "................"
>
>bus 00, slot 1f, func 6, vend:dev:s_vend:s_dev:rev 8086:2486:14f1:5422:02
>class 07, sub_class 03 prog_if 00, hdr 0, flags <>, irq 10
>  addr0 00002400, size 00000100
>  addr1 00002000, size 00000080
>  00: 86 80 86 24 01 00 80 02 02 00 03 07 00 00 00 00  "...$............"
>  10: 01 24 00 00 01 20 00 00 00 00 00 00 00 00 00 00  ".$... .........."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 f1 14 22 54  ".............."T"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00  "................"
>
>bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:0112:1028:00f3:b2
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 10
>  addr0 e0000000, size 01000000
>  addr1 f0000000, size 08000000
>  00: de 10 12 01 03 00 b0 02 b2 00 00 03 00 40 00 00  ".............@.."
>  10: 00 00 00 e0 08 00 00 f0 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "............(..."
>  30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 05 01  "....`..........."
>  40: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 01 44  ".D"
>
>bus 02, slot 01, func 0, vend:dev:s_vend:s_dev:rev 10b7:9200:1028:00f3:78
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 00003000, size 00000080
>  addr1 e8000000, size 00000080
>  00: b7 10 00 92 17 01 10 02 78 00 00 02 08 50 00 00  "........x....P.."
>  10: 01 30 00 00 00 00 00 e8 00 00 00 00 00 00 00 00  ".0.............."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 f3 00  "............(..."
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 0a 0a  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 02->03, slot 04, func 0, vend:dev:s_vend:s_dev:rev 1217:6972:1028:00f3:00
>class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 10
>  addr0 e8001000, size 00001000
>  00: 17 12 72 69 87 00 10 04 00 00 07 06 00 a8 02 00  "..ri............"
>  10: 00 10 00 e8 a0 00 00 02 02 03 06 b0 00 00 00 20  "............... "
>  20: 00 f0 ff 21 00 00 00 24 00 f0 ff 25 01 34 00 00  "...!...$...%.4.."
>  30: fd 34 00 00 01 38 00 00 fd 38 00 00 0a 01 80 05  ".4...8...8......"
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0a03
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0b00
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0c04
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0200
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0c02
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0303
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0f13
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0700
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>>> pcmcia.3: pcmcia ctrl
>  pcmcia socket 0: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:unknown port:000003F8 irq:4
>  1: uart:unknown port:000002F8 irq:3
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x0170 - 0x0177 (0x08) "ide1"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x0376 - 0x0376 (0x01) "ide1"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:0 0x0600 - 0x060f (0x10) "pnp 00:04"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x1000 - 0x107f (0x80) "0000:00:1f.0"
>i/o:0 0x1000 - 0x107f (0x80) "motherboard"
>i/o:0 0x1000 - 0x1003 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x1004 - 0x1005 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x1008 - 0x100b (0x04) "PM_TMR"
>i/o:0 0x1010 - 0x1015 (0x06) "ACPI CPU throttle"
>i/o:0 0x1020 - 0x1020 (0x01) "PM2_CNT_BLK"
>i/o:0 0x1028 - 0x102b (0x04) "GPE0_BLK"
>i/o:0 0x102c - 0x102f (0x04) "GPE1_BLK"
>i/o:0 0x1060 - 0x106f (0x10) "i8xx TCO"
>i/o:0 0x1180 - 0x11bf (0x40) "0000:00:1f.0"
>i/o:0 0x1180 - 0x11bf (0x40) "motherboard"
>i/o:0 0x1200 - 0x120f (0x10) "motherboard"
>i/o:0 0x1800 - 0x181f (0x20) "0000:00:1d.0"
>i/o:0 0x1800 - 0x181f (0x20) "uhci_hcd"
>i/o:0 0x1820 - 0x183f (0x20) "0000:00:1d.1"
>i/o:0 0x1820 - 0x183f (0x20) "uhci_hcd"
>i/o:0 0x1840 - 0x184f (0x10) "0000:00:1f.1"
>i/o:1 0x1840 - 0x1847 (0x08) "ide0"
>i/o:1 0x1848 - 0x184f (0x08) "ide1"
>i/o:0 0x1860 - 0x187f (0x20) "0000:00:1f.3"
>i/o:0 0x1860 - 0x1867 (0x08) "i801_smbus"
>i/o:0 0x1880 - 0x18bf (0x40) "0000:00:1f.5"
>i/o:0 0x1c00 - 0x1cff (0x100) "0000:00:1f.5"
>i/o:0 0x2000 - 0x207f (0x80) "0000:00:1f.6"
>i/o:0 0x2400 - 0x24ff (0x100) "0000:00:1f.6"
>i/o:0 0x3000 - 0x3fff (0x1000) "PCI Bus #02"
>i/o:0 0x3000 - 0x307f (0x80) "0000:02:01.0"
>i/o:0 0x3400 - 0x34ff (0x100) "PCI CardBus #03"
>i/o:0 0x3800 - 0x38ff (0x100) "PCI CardBus #03"
>i/o:0 0xfe00 - 0xfe01 (0x02) "motherboard"
>irq:1  0 (    48972) "timer"
>irq:0  1 (      290) "i8042"
>irq:1  2 (        0) "cascade"
>irq:1  6 (       10) "floppy"
>irq:1  8 (        2) "rtc"
>irq:0  9 (      944) "acpi"
>irq:0 10 (       42) "uhci_hcd:usb1" "yenta" "eth0"
>irq:0 11 (        0) "uhci_hcd:usb2"
>irq:0 12 (      110) "i8042"
>irq:1 14 (     7444) "ide0"
>irq:1 15 (     1592) "ide1"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x46775841fc07d09f) -----
>     i2c_adapter: /module/i2c_core
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>       ide-cdrom: /module/ide_cd
>        ide-disk: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        ide-disk: /module/ide_disk
>           3c59x: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
>           3c59x: /module/3c59x
>         PCI_IDE: /module/generic
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>        PIIX_IDE: /module/piix
>   agpgart-intel: /devices/pci0000:00/0000:00:00.0
>   agpgart-intel: /module/intel_agp
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>      i801_smbus: /module/i2c_i801
>      parport_pc: /module/parport_pc
>          shpchp: /module/shpchp
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
>        uhci_hcd: /module/uhci_hcd
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>   yenta_cardbus: /module/yenta_socket
>           i8042: /devices/platform/i8042
>          pcspkr: /devices/platform/pcspkr
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:06
>       i8042 kbd: /devices/pnp0/00:05
>          system: /devices/pnp0/00:04
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>             hub: /module/usbcore
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /devices/pci0000:00/0000:00:1d.1/usb2
>             usb: /module/usbcore
>           usbfs: /module/usbcore
>----- sysfs driver list end -----
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hdc
>drive speed:		24
>drive # of slots:	1
>Can close tray:		1
>Can open tray:		1
>Can lock tray:		1
>Can change speed:	1
>Can select disk:	0
>Can read multisession:	1
>Can read MCN:		1
>Reports media changed:	1
>Can play audio:		1
>Can write CD-R:		0
>Can write CD-RW:	0
>Can read DVD:		0
>Can write DVD-R:	0
>Can write DVD-RAM:	0
>Can read MRW:		1
>Can write MRW:		1
>Can write RAM:		0
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     3     0   39070080 hda
>     3     1     240943 hda1
>     3     2     771120 hda2
>     3     3     498015 hda3
>     3     4   37559970 hda4
>   253     0    2097152 dm-0
>   253     1    3145728 dm-1
>   253     2    2097152 dm-2
>----- /proc/partitions end -----
>disks:
>  hda
>partitions:
>  hda1
>  hda2
>  hda3
>  hda4
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  block: name = dm-0, path = /block/dm-0
>    dev = 253:0
>    range = 1
>  block: name = dm-1, path = /block/dm-1
>    dev = 253:1
>    range = 1
>  block: name = dm-2, path = /block/dm-2
>    dev = 253:2
>    range = 1
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 64
>    block device: bus = ide, bus_id = 0.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>>> block.5: /dev/hda
>>> block.5.1: /dev/hda geo
>  dev = /dev/hda, fd = 3
>  open ok, fd = 3
>/dev/hda: ioctl(geo) ok
>/dev/hda: ioctl(block size) ok
>/dev/hda: ioctl(disk size) ok
>  block: name = hdc, path = /block/hdc
>    dev = 22:0
>    range = 1
>    block device: bus = ide, bus_id = 1.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:1d.0/usb1
>  usb dev: /devices/pci0000:00/0000:00:1d.1/usb2
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.16-rc4-3-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:1d.1/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.16-rc4-3-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb2
>>> usb.3.1: joydev mod
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/input0/event0
>    dev = 13:64
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event1, path = /class/input/input1/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>  input: name = event2, path = /class/input/input2/event2
>    dev = 13:66
>    input device: bus = platform, bus_id = pcspkr driver = pcspkr
>      path = /devices/platform/pcspkr
>  input: name = mouse0, path = /class/input/input1/mouse0
>    dev = 13:32
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 78140160
>  chs default: 77520/16/63
>  chs legacy: 1023/255/63
>  caps: fixed edd 
>  attached: #0 
>>> modem.1: serial
>******  started child process 3663 (15s/120s)  ******
>******  stopped child process 3663 (120s)  ******
>>> mouse.2: serial
>******  started child process 3664 (20s/20s)  ******
>******  stopped child process 3664 (20s)  ******
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  S: Sysfs=/class/input/input0
>  H: Handlers=kbd event0 
>  B: EV=120013
>  B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
>  B: MSC=10
>  B: LED=7
>  
>  I: Bus=0011 Vendor=0002 Product=0007 Version=0000
>  N: Name="SynPS/2 Synaptics TouchPad"
>  P: Phys=isa0060/serio1/input0
>  S: Sysfs=/class/input/input1
>  H: Handlers=mouse0 event1 
>  B: EV=b
>  B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
>  B: ABS=11000003
>  
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  S: Sysfs=/class/input/input2
>  H: Handlers=kbd event2 
>  B: EV=40001
>  B: SND=6
>  
>----- /proc/bus/input/devices end -----
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event0
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = SynPS/2 Synaptics TouchPad
>  handlers = mouse0 event1
>  key = 0000642000000000000700000000000000000000000000000000000000000000000000000000000000000000
>  abs = 11000003
>  mouse buttons = 3
>  mouse wheels = 0
>bus = 16, name = PC Speaker
>  handlers = kbd event2
>  mouse buttons = 0
>  mouse wheels = 0
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 15
>  model		: 2
>  model name	: Mobile Intel(R) Celeron(R) CPU 1.60GHz
>  stepping	: 7
>  cpu MHz		: 1595.462
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
>  bogomips	: 3197.09
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 2
>>> fb.1: read info
>fb: size 1024 x 768
>fb: timing 78.65 MHz, 59.95 kHz, 75.69 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:0b:db:15:95:c8
>    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
>    ethtool driver: 3c59x
>    ethtool    bus: 0000:02:01.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: ethtool link state: 1
>  lo: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/hda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/dm-0
>  N: dm-0
>  S: disk/by-name/system-opt
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=1.0
>  E: ID_FS_UUID=01a82e7b-a88e-4918-b720-2019e5d5ef02
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/dm-1
>  N: dm-1
>  S: disk/by-name/system-usr
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=1.0
>  E: ID_FS_UUID=238bfbc9-a962-4751-9426-68520985f732
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/dm-2
>  N: dm-2
>  S: disk/by-name/system-var
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=1.0
>  E: ID_FS_UUID=60b7ed57-c14e-4f6a-a63c-a7b6d1be7b43
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda
>  N: hda
>  S: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0
>  E: ID_TYPE=disk
>  E: ID_MODEL=FUJITSU_MHT2040AH
>  E: ID_SERIAL=NP03T3C262WR
>  E: ID_REVISION=006C
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  
>  P: /block/hda/hda1
>  N: hda1
>  S: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part1
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0-part1
>  S: disk/by-uuid/d011ce14-c956-4aa1-8003-7abbc01ca61a
>  E: ID_TYPE=disk
>  E: ID_MODEL=FUJITSU_MHT2040AH
>  E: ID_SERIAL=NP03T3C262WR
>  E: ID_REVISION=006C
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=1.0
>  E: ID_FS_UUID=d011ce14-c956-4aa1-8003-7abbc01ca61a
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda2
>  N: hda2
>  S: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part2
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0-part2
>  S: disk/by-uuid/16551f65-385f-4909-ab76-9ad5c12c947f
>  E: ID_TYPE=disk
>  E: ID_MODEL=FUJITSU_MHT2040AH
>  E: ID_SERIAL=NP03T3C262WR
>  E: ID_REVISION=006C
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=1.0
>  E: ID_FS_UUID=16551f65-385f-4909-ab76-9ad5c12c947f
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda3
>  N: hda3
>  S: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part3
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0-part3
>  E: ID_TYPE=disk
>  E: ID_MODEL=FUJITSU_MHT2040AH
>  E: ID_SERIAL=NP03T3C262WR
>  E: ID_REVISION=006C
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  E: ID_FS_USAGE=other
>  E: ID_FS_TYPE=swap
>  E: ID_FS_VERSION=2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda4
>  N: hda4
>  S: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part4
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0-part4
>  E: ID_TYPE=disk
>  E: ID_MODEL=FUJITSU_MHT2040AH
>  E: ID_SERIAL=NP03T3C262WR
>  E: ID_REVISION=006C
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  E: ID_FS_USAGE=raid
>  E: ID_FS_TYPE=LVM2_member
>  E: ID_FS_VERSION=LVM2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hdc
>  N: hdc
>  S: disk/by-path/pci-0000:00:1f.1-ide-1:0
>  S: cdrom
>  E: ID_TYPE=cd
>  E: ID_MODEL=TEAC_CD-ROM_CD-224E
>  E: ID_SERIAL=
>  E: ID_REVISION=D.9D
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-1:0
>  
>  P: /class/input/input0/event0
>  N: input/event0
>  
>  P: /class/input/input1/event1
>  N: input/event1
>  
>  P: /class/input/input1/mouse0
>  N: input/mouse0
>  
>  P: /class/input/input2/event2
>  N: input/event2
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/misc/device-mapper
>  N: device-mapper
>  S: mapper/control
>  
>  P: /class/misc/hw_random
>  N: hwrng
>  S: hw_random
>  
>  P: /class/usb_device/usbdev1.1
>  N: bus/usb/001/001
>  
>  P: /class/usb_device/usbdev2.1
>  N: bus/usb/002/001
>  
>-----  udevinfo end -----
>/block/dm-0
>  name: dm-0
>  links: disk/by-name/system-opt
>/block/dm-1
>  name: dm-1
>  links: disk/by-name/system-usr
>/block/dm-2
>  name: dm-2
>  links: disk/by-name/system-var
>/block/hda
>  name: hda
>  links: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR, disk/by-path/pci-0000:00:1f.1-ide-0:0
>/block/hda/hda1
>  name: hda1
>  links: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part1, disk/by-path/pci-0000:00:1f.1-ide-0:0-part1, disk/by-uuid/d011ce14-c956-4aa1-8003-7abbc01ca61a
>/block/hda/hda2
>  name: hda2
>  links: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part2, disk/by-path/pci-0000:00:1f.1-ide-0:0-part2, disk/by-uuid/16551f65-385f-4909-ab76-9ad5c12c947f
>/block/hda/hda3
>  name: hda3
>  links: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part3, disk/by-path/pci-0000:00:1f.1-ide-0:0-part3
>/block/hda/hda4
>  name: hda4
>  links: disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part4, disk/by-path/pci-0000:00:1f.1-ide-0:0-part4
>/block/hdc
>  name: hdc
>  links: disk/by-path/pci-0000:00:1f.1-ide-1:0, cdrom
>/class/input/input0/event0
>  name: input/event0
>/class/input/input1/event1
>  name: input/event1
>/class/input/input1/mouse0
>  name: input/mouse0
>/class/input/input2/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/misc/device-mapper
>  name: device-mapper
>  links: mapper/control
>/class/misc/hw_random
>  name: hwrng
>  links: hw_random
>/class/usb_device/usbdev1.1
>  name: bus/usb/001/001
>/class/usb_device/usbdev2.1
>  name: bus/usb/002/001
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (failed)
>  old prop read: rdCR.3wRL2_g4d2B (failed)
>  prop read: /org/freedesktop/Hal/devices/platform_floppy_0_storage (failed)
>  prop read: sPPV.oZ89vuho4Y3 (failed)
>  old prop read: sPPV.oZ89vuho4Y3 (failed)
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (ok)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_1a30 (failed)
>  prop read: qLht.QVsxmZJpst5 (failed)
>  old prop read: qLht.QVsxmZJpst5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_1a31 (failed)
>  prop read: vSkL.oADI+QhFKj4 (failed)
>  old prop read: vSkL.oADI+QhFKj4 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2482 (failed)
>  prop read: 1GTX.CPAKhPz7Sh4 (failed)
>  old prop read: 1GTX.CPAKhPz7Sh4 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2484 (failed)
>  prop read: vayM.EE3qeYCYVS5 (failed)
>  old prop read: vayM.EE3qeYCYVS5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2448 (failed)
>  prop read: 6NW+.Wc+DHj8LOy0 (failed)
>  old prop read: 6NW+.Wc+DHj8LOy0 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_248c (failed)
>  prop read: BUZT.1e2ga506n43 (failed)
>  old prop read: BUZT.1e2ga506n43 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_248a (failed)
>  prop read: 3p2J.HtkE4P8zxuD (failed)
>  old prop read: 3p2J.HtkE4P8zxuD (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2483 (failed)
>  prop read: nS1_.lE+UhX5yNJ3 (failed)
>  old prop read: nS1_.lE+UhX5yNJ3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2485 (failed)
>  prop read: W60f.bLhqUN99526 (failed)
>  old prop read: W60f.bLhqUN99526 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2486 (failed)
>  prop read: ORVU.WiafMnPMDWE (failed)
>  old prop read: ORVU.WiafMnPMDWE (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_112 (failed)
>  prop read: VCu0.jrVv9fn39cC (failed)
>  old prop read: VCu0.jrVv9fn39cC (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b7_9200 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1217_6972 (failed)
>  prop read: UVH2.ubsnuqKH133 (failed)
>  old prop read: UVH2.ubsnuqKH133 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0a03 (failed)
>  prop read: z9pp.QBqTp8zQt87 (failed)
>  old prop read: z9pp.QBqTp8zQt87 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (failed)
>  prop read: QL3u.WYwRElrJa93 (failed)
>  old prop read: QL3u.WYwRElrJa93 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (failed)
>  prop read: tWJy.DE8RM9cWQQ8 (failed)
>  old prop read: tWJy.DE8RM9cWQQ8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (failed)
>  prop read: KiZ0.ld94kxNGZf5 (failed)
>  old prop read: KiZ0.ld94kxNGZf5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (failed)
>  prop read: ntp4.B+yZ9Ve8gC1 (failed)
>  old prop read: ntp4.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0303 (failed)
>  prop read: E349.xhndlW9HXJ7 (failed)
>  old prop read: E349.xhndlW9HXJ7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0f13 (failed)
>  prop read: hEKD.t7Yh1tpgb13 (failed)
>  old prop read: hEKD.t7Yh1tpgb13 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0700 (failed)
>  prop read: NhVi.yhTOLOXWEq7 (failed)
>  old prop read: NhVi.yhTOLOXWEq7 (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR (failed)
>  prop read: l_yX.tPfCH1wi_74 (failed)
>  old prop read: l_yX.tPfCH1wi_74 (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_d011ce14_c956_4aa1_8003_7abbc01ca61a (failed)
>  prop read: 0fbI.SE1wIdpsiiC (failed)
>  old prop read: 0fbI.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_16551f65_385f_4909_ab76_9ad5c12c947f (failed)
>  prop read: TqrM.SE1wIdpsiiC (failed)
>  old prop read: TqrM.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_part3_size_509967360 (failed)
>  prop read: x+5R.SE1wIdpsiiC (failed)
>  old prop read: x+5R.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_part4_size_38461409280 (failed)
>  prop read: OBMV.SE1wIdpsiiC (failed)
>  old prop read: OBMV.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_TEAC_CD_ROM_CD_224E (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0 (failed)
>  prop read: k4bc.7Zd99ya3Rq9 (failed)
>  old prop read: k4bc.7Zd99ya3Rq9 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0 (failed)
>  prop read: pBe4.uHikWiNnN61 (failed)
>  old prop read: pBe4.uHikWiNnN61 (failed)
>  prop read: /org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input (failed)
>  prop read: nLyy.TBWTwSuMeW2 (failed)
>  old prop read: nLyy.TBWTwSuMeW2 (failed)
>  prop read: /org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port_logicaldev_input (failed)
>  prop read: AH6Q.845qvaQafo3 (failed)
>  old prop read: AH6Q.845qvaQafo3 (failed)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_0b_db_15_95_c8 (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>  prop read: wl2P.nfEXJulusj6 (failed)
>  old prop read: wl2P.nfEXJulusj6 (failed)
>----- /proc/modules -----
>  lp 11332 0 - Live 0xd8e9c000
>  parport_pc 35812 0 - Live 0xd8e81000
>  parport 33864 2 lp,parport_pc, Live 0xd8e8d000
>  af_packet 20616 0 - Live 0xd8efc000
>  sg 32284 0 - Live 0xd8f1e000
>  st 35100 0 - Live 0xd8f14000
>  sd_mod 16384 0 - Live 0xd8f03000
>  sr_mod 14884 0 - Live 0xd8e97000
>  scsi_mod 124328 4 sg,st,sd_mod,sr_mod, Live 0xd8ea0000
>  ipv6 223968 12 - Live 0xd8ec4000
>  edd 8516 0 - Live 0xd9169000
>  button 6672 0 - Live 0xd913f000
>  battery 9476 0 - Live 0xd914f000
>  ac 4996 0 - Live 0xd9142000
>  apparmor 49432 0 - Live 0xd915b000
>  aamatch_pcre 13440 1 apparmor, Live 0xd9145000
>  loop 15240 0 - Live 0xd90db000
>  dm_mod 53984 4 - Live 0xd9116000
>  pcmcia 35132 0 - Live 0xd9131000
>  firmware_class 9984 1 pcmcia, Live 0xd90fe000
>  joydev 9152 0 - Live 0xd90fa000
>  3c59x 41384 0 - Live 0xd9125000
>  mii 5120 1 3c59x, Live 0xd90f7000
>  yenta_socket 23820 1 - Live 0xd910f000
>  rsrc_nonstatic 12544 1 yenta_socket, Live 0xd90c7000
>  pcmcia_core 38048 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xd9104000
>  generic 4356 0 [permanent], Live 0xd90d8000
>  i8xx_tco 7332 0 - Live 0xd90d5000
>  i2c_i801 8076 0 - Live 0xd881b000
>  i2c_core 20352 1 i2c_i801, Live 0xd90f1000
>  intel_agp 20892 1 - Live 0xd9075000
>  agpgart 29012 1 intel_agp, Live 0xd90cc000
>  hw_random 5656 0 - Live 0xd9072000
>  ide_cd 35872 0 - Live 0xd90b8000
>  cdrom 32800 2 sr_mod,ide_cd, Live 0xd90ae000
>  uhci_hcd 28560 0 - Live 0xd9088000
>  shpchp 40480 0 - Live 0xd907d000
>  usbcore 113668 2 uhci_hcd, Live 0xd9091000
>  pci_hotplug 24704 1 shpchp, Live 0xd882f000
>  ext3 118920 5 - Live 0xd885f000
>  jbd 60320 1 ext3, Live 0xd9020000
>  fan 4612 0 - Live 0xd881e000
>  thermal 13448 0 - Live 0xd882a000
>  processor 22720 1 thermal, Live 0xd8858000
>  piix 9476 0 [permanent], Live 0xd8826000
>  ide_disk 15360 5 - Live 0xd8821000
>  ide_core 117776 4 generic,ide_cd,piix,ide_disk, Live 0xd9002000
>----- /proc/modules end -----
>  used irqs: 0,1,2,6,8,9,10,11,12,14,15
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.112]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (10 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.120]
>  UDI: /org/freedesktop/Hal/devices/platform_floppy_0_storage
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 2880 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.165]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: off
>    Caps Lock: off
>  Base Memory: 636 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xfd7a0
>  SMBIOS Version: 2.3
>  Type 208 Record: #0
>    Data 00: d0 0a 00 00 01 04 f3 00 00 00
>  Type 212 Record: #1
>    Data 00: d4 11 01 00 70 00 71 00 00 00 00 00 5c 00 7d fe
>    Data 10: 01
>  Type 218 Record: #2
>    Data 00: da 11 02 00 b2 00 de 00 00 00 00 00 00 00 00 ff
>    Data 10: ff
>  Type 222 Record: #3
>    Data 00: de 0d 03 00 01 02 ff ff 00 00 00 00 00
>  BIOS Info: #4
>    Vendor: "PHOENIX TECHNOLOGIES LTD."
>    Version: "A13"
>    Date: "03/23/2004"
>    Start Address: 0xe6af0
>    ROM Size: 512 kB
>    Features: 0x0187000000007c0d9b90
>      ISA supported
>      PCI supported
>      PCMCIA supported
>      PnP supported
>      BIOS flashable
>      BIOS shadowing allowed
>      CD boot supported
>      Selectable boot supported
>      PCMCIA boot supported
>      EDD spec supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      AGP supported
>      Smart Battery supported
>      BIOS Boot Spec supported
>  System Info: #5
>    Manufacturer: "Dell Computer Corporation"
>    Product: "Inspiron 2650"
>    Version: "Revision A0"
>    Serial: "JTMWJ21"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #6
>    Manufacturer: "Dell Computer Corporation"
>    Product: "Inspiron 2650"
>    Version: "None"
>    Serial: "None"
>  Chassis Info: #7
>    Manufacturer: "Dell Computer Corporation"
>    Version: "N/A"
>    Serial: "JTMWJ21"
>    Asset Tag: "No Asset Tag"
>    Type: 0x01 (Other)
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x03 (None)
>    OEM Info: 0x00001234
>  Processor Info: #8
>    Socket: "U49"
>    Socket Type: 0x04 (ZIF Socket)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0xb2 (Pentium 4)
>    Manufacturer: "Intel"
>    Version: "B0"
>    Processor ID: 0xbfebf9ff00000f27
>    Status: 0x01 (Enabled)
>    Voltage: 1.2 V
>    External Clock: 100 MHz
>    Max. Speed: 1600 MHz
>    Current Speed: 1600 MHz
>    L1 Cache: #12
>    L2 Cache: #13
>  Type 5 Record: #9
>    Data 00: 05 14 09 00 03 04 03 03 09 0c 00 00 04 02 02 06
>    Data 10: 00 07 00 04
>  Type 6 Record: #10
>    Data 00: 06 0c 0a 00 01 01 00 00 05 88 88 00
>    String 1: "M1"
>  Type 6 Record: #11
>    Data 00: 06 0c 0b 00 01 23 00 00 05 07 07 00
>    String 1: "M2"
>  Cache Info: #12
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 16 kB
>    Current Size: 16 kB
>    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
>    Current SRAM Type: 0x0040 (Asynchronous)
>  Cache Info: #13
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 512 kB
>    Current Size: 256 kB
>    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
>    Current SRAM Type: 0x0008 (Burst)
>  Port Connector: #14
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "JP4"
>    External Designator: "Parallel"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #15
>    Type: 0x1c (Video Port)
>    Internal Designator: "JP3"
>    External Designator: "SVGA-Out"
>    External Connector: 0x07 (DB-15 pin female)
>  Port Connector: #16
>    Type: 0x10 (USB)
>    Internal Designator: "JP1/JP9"
>    External Designator: "USB"
>    External Connector: 0x12 (Access Bus [USB])
>  System Slot: #17
>    Designation: "OZ6912"
>    Type: 0x07 (PC Card [PCMCIA])
>    Bus Width: 0x05 (32 bit)
>    Status: 0x02 (Unknown)
>    Length: 0x01 (Other)
>    Slot ID: 0
>    Characteristics: 0x0226 (5.0 V, 3.3 V, CardBus, Hot-Plug)
>  On Board Devices: #18
>    Video: "nVIDIA NV11M"
>    Sound: "Sigmtel STAC9700"
>  OEM Strings: #19
>    Dell System
>    1[F3]
>    3[1.1]
>  System Config Options (Jumpers & Switches) #20:
>  Physical Memory Array: #21
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 2
>    Max. Size: 512 MB
>    ECC: 0x03 (None)
>  Memory Device: #22
>    Location: "J6A"
>    Bank: "SO DIMM 0"
>    Memory Array: #21
>    Error Info: No Error
>    Form Factor: 0x0d (SODIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>  Memory Device: #23
>    Location: "J7A"
>    Bank: "SO DIMM 1"
>    Memory Array: #21
>    Error Info: No Error
>    Form Factor: 0x0d (SODIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 128 MB
>  Memory Array Mapping: #24
>    Memory Array: #21
>    Partition Width: 4
>    Start Address: 0x00000000
>    End Address: 0x18000000
>  Memory Device Mapping: #25
>    Memory Device: #22
>    Array Mapping: #24
>    Row: 4
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Pointing Device: #26
>    Type: 0x07 (Touch Pad)
>    Interface: 0x04 (PS/2)
>    Buttons: 2
>  Type 22 Record: #27
>    Data 00: 16 1a 1b 00 01 02 00 00 02 02 40 e7 d0 39 06 01
>    Data 10: 7a 06 61 2b 07 0a 00 00 00 00
>    String 1: "1st Battery"
>    String 2: "SANYO"
>    String 3: "12/12/2001"
>    String 4: "0018"
>    String 5: "CPL-17"
>    String 6: "1.1"
>    String 7: "LION"
>  Type 32 Record: #28
>    Data 00: 20 14 1c 00 00 00 00 00 00 00 0c 01 02 03 04 05
>    Data 10: 06 07 08 09
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.57]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Formfactor: "unknown"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  IRQ: 2 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (48972 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (2 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>13: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x17f7ffff (rw)
>  Memory Size: 384 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: PCI(AGP) 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_1a30
>  Unique ID: qLht.QVsxmZJpst5
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Dell 82845 845 (Brookdale) Chipset Host Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1a30 "82845 845 (Brookdale) Chipset Host Bridge"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x05
>  Driver: "agpgart-intel"
>  Memory Range: 0xec000000-0xefffffff (rw,prefetchable)
>  Module Alias: "pci:v00008086d00001A30sv00001028sd000000F3bc06sc00i00"
>  Driver Info #0:
>    Driver Status: intel_agp is active
>    Driver Activation Cmd: "modprobe intel_agp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_1a31
>  Unique ID: vSkL.oADI+QhFKj4
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "Intel 82845 845 (Brookdale) Chipset AGP Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1a31 "82845 845 (Brookdale) Chipset AGP Bridge"
>  Revision: 0x05
>  Module Alias: "pci:v00008086d00001A31sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 1d.0: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2482
>  Unique ID: 1GTX.CPAKhPz7Sh4
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0
>  SysFS BusID: 0000:00:1d.0
>  Hardware Class: usb controller
>  Model: "Dell 82801CA/CAM USB (Hub #1)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2482 "82801CA/CAM USB (Hub #1)"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1800-0x181f (rw)
>  IRQ: 10 (42 events)
>  Module Alias: "pci:v00008086d00002482sv00001028sd000000F3bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 1d.1: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2484
>  Unique ID: vayM.EE3qeYCYVS5
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1
>  SysFS BusID: 0000:00:1d.1
>  Hardware Class: usb controller
>  Model: "Dell 82801CA/CAM USB (Hub #2)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2484 "82801CA/CAM USB (Hub #2)"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1820-0x183f (rw)
>  IRQ: 11 (no events)
>  Module Alias: "pci:v00008086d00002484sv00001028sd000000F3bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 1e.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2448
>  Unique ID: 6NW+.Wc+DHj8LOy0
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 Mobile PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2448 "82801 Mobile PCI Bridge"
>  Revision: 0x42
>  Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: hw_random is active
>    Driver Activation Cmd: "modprobe hw_random"
>  Driver Info #1:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>19: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_248c
>  Unique ID: BUZT.1e2ga506n43
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Intel 82801CAM ISA Bridge (LPC)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x248c "82801CAM ISA Bridge (LPC)"
>  Revision: 0x02
>  Module Alias: "pci:v00008086d0000248Csv00000000sd00000000bc06sc01i00"
>  Driver Info #0:
>    Driver Status: i8xx_tco is active
>    Driver Activation Cmd: "modprobe i8xx_tco"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 1f.1: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_248a
>  Unique ID: 3p2J.HtkE4P8zxuD
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "Dell 82801CAM IDE U100"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x248a "82801CAM IDE U100"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x02
>  Driver: "PIIX_IDE"
>  I/O Ports: 0x1840-0x184f (rw)
>  Memory Range: 0x23000000-0x230003ff (rw,non-prefetchable)
>  IRQ: 11 (no events)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  I/O Ports: 0x170-0x177 (rw)
>  I/O Port: 0x376 (rw)
>  IRQ: 14 (7444 events)
>  IRQ: 15 (1592 events)
>  Module Alias: "pci:v00008086d0000248Asv00001028sd000000F3bc01sc01i8a"
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 1f.3: 0c05 SMBus
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2483
>  Unique ID: nS1_.lE+UhX5yNJ3
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "Dell 82801CA/CAM SMBus Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2483 "82801CA/CAM SMBus Controller"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x02
>  Driver: "i801_smbus"
>  I/O Ports: 0x1860-0x187f (rw)
>  IRQ: 10 (42 events)
>  Module Alias: "pci:v00008086d00002483sv00001028sd000000F3bc0Csc05i00"
>  Driver Info #0:
>    Driver Status: i2c_i801 is active
>    Driver Activation Cmd: "modprobe i2c_i801"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 1f.5: 0401 Multimedia audio controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2485
>  Unique ID: W60f.bLhqUN99526
>  SysFS ID: /devices/pci0000:00/0000:00:1f.5
>  SysFS BusID: 0000:00:1f.5
>  Hardware Class: sound
>  Model: "Dell 82801CA/CAM AC'97 Audio Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2485 "82801CA/CAM AC'97 Audio Controller"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x02
>  I/O Ports: 0x1c00-0x1cff (rw)
>  I/O Ports: 0x1880-0x18bf (rw)
>  IRQ: 10 (42 events)
>  Module Alias: "pci:v00008086d00002485sv00001028sd000000F3bc04sc01i00"
>  Driver Info #0:
>    Driver Status: snd_intel8x0 is not active
>    Driver Activation Cmd: "modprobe snd_intel8x0"
>  Driver Info #1:
>    Driver Status: i810_audio is not active
>    Driver Activation Cmd: "modprobe i810_audio"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>23: PCI 1f.6: 10204 LinModem
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2486
>  Unique ID: ORVU.WiafMnPMDWE
>  SysFS ID: /devices/pci0000:00/0000:00:1f.6
>  SysFS BusID: 0000:00:1f.6
>  Hardware Class: modem
>  Model: "Conexant 82801CA/CAM AC'97 Modem Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2486 "82801CA/CAM AC'97 Modem Controller"
>  SubVendor: pci 0x14f1 "Conexant"
>  SubDevice: pci 0x5422 
>  Revision: 0x02
>  Device File: /dev/ttySL0
>  Device Number: char 212:0
>  I/O Ports: 0x2400-0x24ff (rw)
>  I/O Ports: 0x2000-0x207f (rw)
>  IRQ: 10 (42 events)
>  Requires: kernel-nongpl, smartlink-softmodem
>  Module Alias: "pci:v00008086d00002486sv000014F1sd00005422bc07sc03i00"
>  Driver Info #0:
>    Driver Status: slamr is not active
>    Driver Activation Cmd: "modprobe slamr"
>  Driver Info #1:
>    Driver Status: snd_intel8x0m is not active
>    Driver Activation Cmd: "modprobe snd_intel8x0m"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>24: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_112
>  Unique ID: VCu0.jrVv9fn39cC
>  Parent ID: vSkL.oADI+QhFKj4
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>  SysFS BusID: 0000:01:00.0
>  Hardware Class: graphics card
>  Model: "Dell GeForce2 Go"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x0112 "GeForce2 Go"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0xb2
>  Memory Range: 0xe0000000-0xe0ffffff (rw,non-prefetchable)
>  Memory Range: 0xf0000000-0xf7ffffff (rw,prefetchable)
>  Memory Range: 0xe1000000-0xe100ffff (ro,prefetchable,disabled)
>  IRQ: 10 (42 events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v000010DEd00000112sv00001028sd000000F3bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: nv
>  Driver Info #1:
>    XFree86 v4 Server Module: nvidia
>    3D Support: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #15 (PCI bridge)
>
>25: PCI 201.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b7_9200
>  Unique ID: rBUF.oOfgbdRycVB
>  Parent ID: 6NW+.Wc+DHj8LOy0
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
>  SysFS BusID: 0000:02:01.0
>  Hardware Class: network
>  Model: "Dell 3c905C-TX/TX-M [Tornado]"
>  Vendor: pci 0x10b7 "3Com Corporation"
>  Device: pci 0x9200 "3c905C-TX/TX-M [Tornado]"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Revision: 0x78
>  Driver: "3c59x"
>  Device File: eth0
>  I/O Ports: 0x3000-0x3fff (rw)
>  Memory Range: 0xe8000000-0xe800007f (rw,non-prefetchable)
>  Memory Range: 0x22000000-0x2201ffff (ro,prefetchable,disabled)
>  IRQ: 10 (42 events)
>  HW Address: 00:0b:db:15:95:c8
>  Link detected: yes
>  Module Alias: "pci:v000010B7d00009200sv00001028sd000000F3bc02sc00i00"
>  Driver Info #0:
>    Driver Status: 3c59x is active
>    Driver Activation Cmd: "modprobe 3c59x"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>26: PCI 204.0: 0607 CardBus bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1217_6972
>  Unique ID: UVH2.ubsnuqKH133
>  Parent ID: 6NW+.Wc+DHj8LOy0
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>  SysFS BusID: 0000:02:04.0
>  Hardware Class: bridge
>  Model: "Dell OZ601/6912/711E0 CardBus/SmartCardBus Controller"
>  Vendor: pci 0x1217 "O2 Micro, Inc."
>  Device: pci 0x6972 "OZ601/6912/711E0 CardBus/SmartCardBus Controller"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x00f3 
>  Driver: "yenta_cardbus"
>  Memory Range: 0xe8001000-0xe8001fff (rw,non-prefetchable)
>  IRQ: 10 (42 events)
>  Module Alias: "pci:v00001217d00006972sv00001028sd000000F3bc06sc07i00"
>  Driver Info #0:
>    Driver Status: yenta_socket is active
>    Driver Activation Cmd: "modprobe yenta_socket"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>27: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0a03
>  Unique ID: z9pp.QBqTp8zQt87
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0a03 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: QL3u.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: tWJy.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: KiZ0.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: ntp4.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
>  Unique ID: E349.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0f13
>  Unique ID: hEKD.t7Yh1tpgb13
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0f13 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
>  Unique ID: NhVi.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: IDE 00.0: 10600 Disk
>  [Created at block.191]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_NP03T3C262WR
>  Unique ID: l_yX.tPfCH1wi_74
>  Parent ID: 3p2J.HtkE4P8zxuD
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: disk
>  Model: "FUJITSU MHT2040AH"
>  Vendor: "FUJITSU"
>  Device: "MHT2040AH"
>  Revision: "006C"
>  Serial ID: "NP03T3C262WR"
>  Driver: "PIIX_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR
>  Device Files: /dev/hda, /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Geometry (Logical): CHS 77520/16/63
>  Size: 78140160 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 77520/16/63
>  Size (BIOS EDD): 78140160 sectors
>  Geometry (BIOS Legacy): CHS 1023/255/63
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (IDE interface)
>
>36: None 00.0: 11300 Partition
>  [Created at block.360]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_d011ce14_c956_4aa1_8003_7abbc01ca61a
>  Unique ID: 0fbI.SE1wIdpsiiC
>  Parent ID: l_yX.tPfCH1wi_74
>  SysFS ID: /block/hda/hda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part1
>  Device Files: /dev/hda1, /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part1, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part1, /dev/disk/by-uuid/d011ce14-c956-4aa1-8003-7abbc01ca61a
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #35 (Disk)
>
>37: None 00.0: 11300 Partition
>  [Created at block.360]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_16551f65_385f_4909_ab76_9ad5c12c947f
>  Unique ID: TqrM.SE1wIdpsiiC
>  Parent ID: l_yX.tPfCH1wi_74
>  SysFS ID: /block/hda/hda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part2
>  Device Files: /dev/hda2, /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part2, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part2, /dev/disk/by-uuid/16551f65-385f-4909-ab76-9ad5c12c947f
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #35 (Disk)
>
>38: None 00.0: 11300 Partition
>  [Created at block.360]
>  UDI: /org/freedesktop/Hal/devices/volume_part3_size_509967360
>  Unique ID: x+5R.SE1wIdpsiiC
>  Parent ID: l_yX.tPfCH1wi_74
>  SysFS ID: /block/hda/hda3
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part3
>  Device Files: /dev/hda3, /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part3, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part3
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #35 (Disk)
>
>39: None 00.0: 11300 Partition
>  [Created at block.360]
>  UDI: /org/freedesktop/Hal/devices/volume_part4_size_38461409280
>  Unique ID: OBMV.SE1wIdpsiiC
>  Parent ID: l_yX.tPfCH1wi_74
>  SysFS ID: /block/hda/hda4
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part4
>  Device Files: /dev/hda4, /dev/disk/by-id/ata-FUJITSU_MHT2040AH_NP03T3C262WR-part4, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #35 (Disk)
>
>40: IDE 02.0: 10602 CD-ROM
>  [Created at block.195]
>  UDI: /org/freedesktop/Hal/devices/storage_model_TEAC_CD_ROM_CD_224E
>  Unique ID: 90A1.XxeT_+ORBlA
>  Parent ID: 3p2J.HtkE4P8zxuD
>  SysFS ID: /block/hdc
>  SysFS BusID: 1.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  Hardware Class: cdrom
>  Model: "TEAC CD-ROM CD-224E"
>  Vendor: "TEAC"
>  Device: "CD-ROM CD-224E"
>  Revision: "D.9D"
>  Serial ID: ""
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-path/pci-0000:00:1f.1-ide-1:0
>  Device Files: /dev/hdc, /dev/disk/by-path/pci-0000:00:1f.1-ide-1:0, /dev/cdrom
>  Device Number: block 22:0
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #20 (IDE interface)
>  Drive Speed: 24
>
>41: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0
>  Unique ID: k4bc.7Zd99ya3Rq9
>  Parent ID: 1GTX.CPAKhPz7Sh4
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.16-rc4-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.16-rc4-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (USB Controller)
>
>42: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0
>  Unique ID: pBe4.uHikWiNnN61
>  Parent ID: vayM.EE3qeYCYVS5
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.16-rc4-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.16-rc4-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #17 (USB Controller)
>
>43: PS/2 00.0: 10800 Keyboard
>  [Created at input.137]
>  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input
>  Unique ID: nLyy.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event0
>  Device Number: char 13:64
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>44: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.157]
>  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port_logicaldev_input
>  Unique ID: AH6Q.845qvaQafo3
>  Hardware Class: mouse
>  Model: "SynPS/2 Synaptics TouchPad"
>  Vendor: int 0x0212 
>  Device: int 0x0001 "SynPS/2 Synaptics TouchPad"
>  Compatible to: int 0x0210 0x0003
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event1
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 3
>    Wheels: 0
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "GenuineIntel"
>  Model: 15.2.7 "Mobile Intel(R) Celeron(R) CPU 1.60GHz"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,cid
>  Clock: 1595 MHz
>  Cache: 256 kb
>  Units/Processor: 1
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>46: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1024x768@76Hz
>  Driver Info #0:
>    Max. Resolution: 1024x768
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-61 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>47: None 00.0: 10701 Ethernet
>  [Created at net.114]
>  UDI: /org/freedesktop/Hal/devices/net_00_0b_db_15_95_c8
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.oOfgbdRycVB
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "3c59x"
>  Device File: eth0
>  HW Address: 00:0b:db:15:95:c8
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #25 (Ethernet controller)
>
>48: None 00.0: 10700 Loopback
>  [Created at net.114]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>49: None 00.0: 10781 Network Interface
>  [Created at net.114]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 152101: 69411 | 70239 | 70240 | 70241 | 70563 | 177547 | 177548