Attachment 70664 Details for Bug 141970

dmesg output

dmesg-output (text/plain), 17.58 KB, created by Martin Jürgens on 2006-02-28 16:01:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Martin Jürgens

Created: 2006-02-28 16:01:06 UTC

Size: 17.58 KB

patch

obsolete

>Linux version 2.6.16-rc3-git3-2-default (geeko@buildhost) (gcc version 4.1.0 20060210 (prerelease) (SUSE Linux)) #1 Wed Feb 15 15:03:23 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002beb0000 (usable)
> BIOS-e820: 000000002beb0000 - 000000002beb8000 (ACPI data)
> BIOS-e820: 000000002beb8000 - 000000002bf00000 (ACPI NVS)
> BIOS-e820: 000000002bf00000 - 0000000030000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>702MB LOWMEM available.
>found SMP MP-table at 000f64d0
>On node 0 totalpages: 179888
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 175792 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.3 present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f64a0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x2beb3c1c
>ACPI: FADT (v001 VN800  FIC_LM7R 0x06040000 PTL_ 0x000f4240) @ 0x2beb7eec
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x2beb7f60
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x2beb7fb0
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x2beb3d91
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x2beb3c54
>ACPI: DSDT (v001 FIC    LM7R     0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: local apic disabled
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: FIC      Product ID: LM7R         APIC at: 0xFEE00000
>Processor #0 6:13 APIC version 20
>I/O APIC #1 Version 3 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 40000000 (gap: 30000000:cffe0000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda6 vga=0x317 selinux=0    pci=noacpi NOPCMCIA resume=/dev/sda1  splash=silent showopts
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1407.296 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 707412k/719552k available (1550k kernel code, 11524k reserved, 624k data, 156k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2819.47 BogoMIPS (lpj=5638942)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel(R) Celeron(R) M processor         1.40GHz stepping 08
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2306k freed
>ACPI: Looking for DSDT in initramfs... found /DSDT.aml ... successfully read 14888 bytes from /DSDT.aml
>ACPI: Using customized DSDT
>ACPI (tbget-0282): Table [DSDT] replaced by host OS [20060127]
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
>ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
>ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
>ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127]
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
>PCI: Found IRQ 5 for device 0000:00:06.0
>PCI: Sharing IRQ 5 with 0000:00:0c.2
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:11.5
>PCI: Sharing IRQ 5 with 0000:00:11.6
>PCI: Found IRQ 10 for device 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:10.1
>PCI: Sharing IRQ 10 with 0000:00:12.0
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:06: ioport range 0xfe10-0xfe11 has been reserved
>pnp: 00:06: ioport range 0xfe00-0xfe00 has been reserved
>PCI: Failed to allocate mem resource #6:10000@f4000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: d1000000-d1ffffff
>  PREFETCH window: f0000000-f3ffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0c.0
>  IO window: 00002400-000024ff
>  IO window: 00002800-000028ff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: 42000000-43ffffff
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Found IRQ 10 for device 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:10.1
>PCI: Sharing IRQ 10 with 0000:00:12.0
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1141141692.132:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Bypassing VIA 8237 APIC De-Assert Message
>vesafb: framebuffer at 0xf0000000, mapped to 0xec880000, using 6144k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=41
>vesafb: protected mode interface info at c000:aa85
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 80290 bytes,<6>...found (1024x768, 32624 bytes, v3).
>Console: switching to colour frame buffer device 93x45
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PS/2 Mouse as /class/input/input1
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
>input: PC Speaker as /class/input/input3
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
> LID MODM Z00A 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 156k freed
>Write protecting the kernel read-only data: 286k
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>libata version 1.20 loaded.
>sata_via 0000:00:0f.0: version 1.1
>PCI: Found IRQ 9 for device 0000:00:0f.0
>sata_via 0000:00:0f.0: routed to hard irq line 9
>sata_via 0000:00:0f.0: enabling SATA channels (0x32)
>ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1426 bmdma 0x1400 irq 9
>ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1422 bmdma 0x1408 irq 9
>ata1: SATA link up 1.5 Gbps (SStatus 113)
>input: PS/2 Mouse as /class/input/input4
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
>ata1: dev 0 cfg 00:045a 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3f01 87:6003 88:40ff 93:0000
>ata1: dev 0 ATA-7, max UDMA7, 78140160 sectors: LBA48
>sata_get_dev_handle: SATA dev addr=0xf0000, handle=0x00000000
>ata1: dev 0 configured for UDMA/133
>sata_get_dev_handle: SATA dev addr=0xf0000, handle=0x00000000
>scsi0 : sata_via
>ata2: SATA link down (SStatus 0)
>scsi1 : sata_via
>  Vendor: ATA       Model: SAMSUNG HM040HI   Rev: YA10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>PCI: Found IRQ 10 for device 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:10.1
>PCI: Sharing IRQ 10 with 0000:00:12.0
>PCI: Via IRQ fixup for 0000:00:0f.1, from 0 to 10
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide1: BM-DMA at 0x1418-0x141f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide1...
>hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (44 C)
>ACPI: Fan [FAN] (on)
>Attempting manual resume
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>Adding 385520k swap on /dev/sda1.  Priority:-1 extents:1 across:385520k
>lp: driver loaded but no devices found
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>PCI: Found IRQ 10 for device 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:10.1
>PCI: Sharing IRQ 10 with 0000:00:12.0
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Linux agpgart interface v0.101 (c) Dave Jones
>Yenta: CardBus bridge found at 0000:00:0c.0 [1734:109b]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0c.0, mfunc 0x01ac1b22, devctl 0x64
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Yenta TI: socket 0000:00:0c.0 probing PCI interrupt failed, trying to fix
>USB Universal Host Controller Interface driver v2.3
>Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
>Yenta: no PCI IRQ, CardBus support disabled for this socket.
>Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
>ieee1394: Initialized config rom entry `ip1394'
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 0
>Socket status: 30000006
>PCI: Found IRQ 10 for device 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:10.1
>PCI: Sharing IRQ 10 with 0000:00:12.0
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 10, io base 0x00001440
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc3-git3-2-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:10.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Found IRQ 10 for device 0000:00:10.1
>PCI: Sharing IRQ 10 with 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:12.0
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 10, io base 0x00001460
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc3-git3-2-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>via82xx: Assuming DXS channels with 48k fixed sample rate.
>         Please try dxs_support=5 option
>         and report if it works on your machine.
>         For more details, read ALSA-Configuration.txt.
>PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
>PCI: Found IRQ 5 for device 0000:00:11.5
>PCI: Sharing IRQ 5 with 0000:00:06.0
>PCI: Sharing IRQ 5 with 0000:00:0c.2
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:11.6
>PCI: Via IRQ fixup for 0000:00:11.5, from 255 to 5
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>PCI: Found IRQ 5 for device 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:06.0
>PCI: Sharing IRQ 5 with 0000:00:0c.2
>PCI: Sharing IRQ 5 with 0000:00:11.5
>PCI: Sharing IRQ 5 with 0000:00:11.6
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:10.4: irq 5, io mem 0xd0002800
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc3-git3-2-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:10.4
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>agpgart: Detected VIA P4M800CE chipset
>agpgart: AGP aperture is 256M @ 0xe0000000
>PCI: Enabling device 0000:00:0c.2 (0010 -> 0012)
>
>PCI: IRQ 5 for device 0000:00:0c.2 doesn't match PIRQ mask - try pci=usepirqmask
><6>PCI: Found IRQ 5 for device 0000:00:0c.2
>PCI: Sharing IRQ 5 with 0000:00:06.0
>PCI: Sharing IRQ 5 with 0000:00:10.4
>PCI: Sharing IRQ 5 with 0000:00:11.5
>PCI: Sharing IRQ 5 with 0000:00:11.6
>PCI: Setting latency timer of device 0000:00:0c.2 to 64
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[d0002000-d00027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>PCI: Found IRQ 10 for device 0000:00:12.0
>PCI: Sharing IRQ 10 with 0000:00:0c.0
>PCI: Sharing IRQ 10 with 0000:00:0f.1
>PCI: Sharing IRQ 10 with 0000:00:10.0
>PCI: Sharing IRQ 10 with 0000:00:10.1
>eth0: VIA Rhine II at 0x12000, 00:40:ca:d8:b0:88, IRQ 10.
>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040ca013470e7e4]
>loop: loaded (max 8 devices)
>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>ReiserFS: sda5: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda5: checking transaction log (sda5)
>ReiserFS: sda5: Using r5 hash to sort names
>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1141141717.761:2): AppArmor (version 2.0-19.43r6152) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (5621 buckets, 44968 max) - 232 bytes per conntrack
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Lid Switch [LID]
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 already at revision 0x20 (current=0x20)
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow: This module only works with AMD K7 CPUs
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 141970: 69642 | 70663 | 70664