Attachment 71081 Details for Bug 154839

boot.msg from 10.1 beta5

boot.msg (text/plain), 10.47 KB, created by Roger Larsson on 2006-03-02 21:33:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Roger Larsson

Created: 2006-03-02 21:33:03 UTC

Size: 10.47 KB

patch

obsolete

><5>Linux version 2.6.16-rc4-3-default (geeko@buildhost) (gcc version 4.1.0 20060218 (prerelease) (SUSE Linux)) #1 Mon Feb 20 15:56:05 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
><4> BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
><4> BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
><4> BIOS-e820: 00000000fffe9400 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>127MB LOWMEM available.
><6>No mptable found.
><7>On node 0 totalpages: 32752
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 28656 pages, LIFO batch:7
><7>  HighMem zone: 0 pages, LIFO batch:0
><6>DMI 2.1 present.
><6>APIC disabled because your old system seems to be old
><6>overwrite with "apic"
><7>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f71e0
><7>ACPI: RSDT (v001 PTLTD    RSDT   0x00000000  LTP 0x00000000) @ 0x07ffbcf9
><7>ACPI: FADT (v001 IBM    430BX    0x00000000 PTL  0x000f4240) @ 0x07fffb65
><7>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x00000000  LTP 0x00000001) @ 0x07fffbd9
><7>ACPI: DSDT (v001    IBM      BT2 0x00000000 MSFT 0x01000007) @ 0x00000000
><3>ACPI: BIOS age (1999) fails cutoff (2001), acpi=force is required to enable ACPI
><4>ACPI: Disabling ACPI support
><4>Allocating PCI resources starting at 10000000 (gap: 08000000:f7fe9400)
><4>Built 1 zonelists
><5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,08000600.spl splash=silent vga=0x314
><6>bootsplash: silent mode.
><6>Enabling fast FPU save and restore... done.
><6>Initializing CPU#0
><4>PID hash table entries: 512 (order: 9, 8192 bytes)
><4>Detected 331.752 MHz processor.
><6>Using tsc for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
><6>Memory: 118372k/131008k available (1553k kernel code, 12084k reserved, 625k data, 160k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 664.84 BogoMIPS (lpj=1329687)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 256K
><7>CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>CPU: Intel Mobile Pentium II stepping 0a
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 8098k freed
><6>NET: Registered protocol family 16
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=4
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20060127
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI quirk: region 1000-103f claimed by PIIX4 ACPI
><4>PCI quirk: region 1040-104f claimed by PIIX4 SMB
><4>PIIX4 devres E PIO at 03b8-03bf
><4>PIIX4 devres G PIO at 002e-002f
><7>Boot video device is 0000:01:00.0
><6>PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:02.0
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: fe400000-febfffff
><6>  PREFETCH window: de000000-deffffff
><4>PCI: Bus 2, cardbus bridge: 0000:00:03.0
><4>  IO window: 00001400-000014ff
><4>  IO window: 00001800-000018ff
><4>  PREFETCH window: 12000000-13ffffff
><4>  MEM window: 14000000-15ffffff
><4>PCI: Bus 6, cardbus bridge: 0000:00:03.1
><4>  IO window: 00001c00-00001cff
><4>  IO window: 00002000-000020ff
><4>  PREFETCH window: 16000000-17ffffff
><4>  MEM window: 18000000-19ffffff
><6>PCI: Found IRQ 11 for device 0000:00:03.0
><6>PCI: Sharing IRQ 11 with 0000:00:03.1
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:03.0 to 64
><6>PCI: Found IRQ 11 for device 0000:00:03.1
><6>PCI: Sharing IRQ 11 with 0000:00:03.0
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:03.1 to 64
><6>Simple Boot Flag at 0x40 set to 0x1
><6>IBM machine detected. Enabling interrupts during APM calls.
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><6>audit: initializing netlink socket (disabled)
><5>audit(1141316248.356:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>Limiting direct PCI/PCI transfers.
><6>vesafb: framebuffer at 0xde000000, mapped to 0xc8880000, using 2496k, total 2496k
><6>vesafb: mode is 800x600x16, linelength=1600, pages=1
><6>vesafb: protected mode interface info at c000:a670
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 79463 bytes,<6>...found (800x600, 19227 bytes, v3).
><4>Console: switching to colour frame buffer device 84x34
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a National Semiconductor PC87306
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>IBM TrackPoint firmware: 0x0b, buttons: 3/3
><6>input: TPPS/2 IBM TrackPoint as /class/input/input1
><6>input: PC Speaker as /class/input/input2
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
><4>TCP established hash table entries: 8192 (order: 5, 131072 bytes)
><4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
><6>TCP: Hash tables configured (established 8192 bind 8192)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI Shortcut mode
><6>Freeing unused kernel memory: 160k freed
><4>Write protecting the kernel read-only data: 286k
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><6>st: Version 20050830, fixed bufsize 32768, s/g segs 256
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>Non-volatile memory driver v1.2
><6>NET: Registered protocol family 17
><6>loop: loaded (max 8 devices)
><4>end_request: I/O error, dev fd0, sector 0
><4>end_request: I/O error, dev fd0, sector 0
><6>PIIX4: IDE controller at PCI slot 0000:00:02.1
><6>PIIX4: chipset revision 1
><6>PIIX4: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0xfc90-0xfc97, BIOS settings: hda:pio, hdb:pio
><6>    ide1: BM-DMA at 0xfc98-0xfc9f, BIOS settings: hdc:pio, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: IBM-DBCA-206480, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 128KiB
><6>hda: 12685680 sectors (6495 MB) w/420KiB Cache, CHS=13424/15/63, UDMA(33)
><6>hda: cache flushes not supported
><6> hda: hda1 hda2 < hda5 hda6 >
><7>Probing IDE interface ide1...
><4>hdc: CRN-8241B, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><6>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
><6>Uniform CD-ROM driver Revision: 3.20
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>USB Universal Host Controller Interface driver v2.3
><6>PCI: Found IRQ 11 for device 0000:00:02.2
><6>uhci_hcd 0000:00:02.2: UHCI Host Controller
><6>uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:02.2: irq 11, io base 0x0000fca0
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16-rc4-3-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.2
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>Initializing USB Mass Storage driver...
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><6>PCI: Found IRQ 11 for device 0000:00:03.0
><6>PCI: Sharing IRQ 11 with 0000:00:03.1
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><6>Yenta: CardBus bridge found at 0000:00:03.0 [1014:0138]
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:03.0, mfunc 0x00002000, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0698, PCI irq 11
><6>Socket status: 30000006
><6>PCI: Found IRQ 11 for device 0000:00:03.1
><6>PCI: Sharing IRQ 11 with 0000:00:03.0
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><6>Yenta: CardBus bridge found at 0000:00:03.1 [1014:0138]
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:03.1, mfunc 0x00002000, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0698, PCI irq 11
><6>Socket status: 30000010
><5>pccard: PCMCIA card inserted into slot 1
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>cs: memory probe 0xa0000000-0xa0ffffff: clean.
><5>pcmcia: registering new device pcmcia1.0
><4>end_request: I/O error, dev fd0, sector 0
><4>end_request: I/O error, dev fd0, sector 0
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><7>ISO 9660 Extensions: RRIP_1991A

Actions: View

Attachments on bug 154839: 71079 | 71081 | 71510