Attachment 71591 Details for Bug 155761

dmesg after boot

dmesg (text/plain), 17.09 KB, created by Forgotten User ZhJd0F0L3x on 2006-03-07 15:58:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User ZhJd0F0L3x

Created: 2006-03-07 15:58:42 UTC

Size: 17.09 KB

patch

obsolete

>Linux version 2.6.16-rc5-git2-2-default (geeko@buildhost) (gcc version 4.1.0 20060223 (prerelease) (SUSE Linux)) #1 Tue Feb 28 09:16:17 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable)
> BIOS-e820: 000000001fdf0000 - 000000001fdfb000 (ACPI data)
> BIOS-e820: 000000001fdfb000 - 000000001fe00000 (ACPI NVS)
> BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>509MB LOWMEM available.
>found SMP MP-table at 000f7b00
>On node 0 totalpages: 130544
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 126448 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI present.
>APIC enabled because system is MP or new enough
>ACPI: RSDP (v000 SONY                                  ) @ 0x000f7ad0
>ACPI: RSDT (v001   SONY       F0 0x20031107 PTL  0x00000000) @ 0x1fdf6c69
>ACPI: FADT (v001   SONY       F0 0x20031107 PTL  0x01000000) @ 0x1fdfaf3c
>ACPI: MADT (v001   SONY       F0 0x20031107 PTL  0x00000000) @ 0x1fdfafb0
>ACPI: DSDT (v001   SONY       F0 0x20031107 PTL  0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda7 vga=0x317 selinux=0    sysrq=yes resume=/dev/hda2  splash=silent
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 2806.812 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512080k/522176k available (1553k kernel code, 9524k reserved, 621k data, 160k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5620.05 BogoMIPS (lpj=11240111)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2265k freed
> not found!
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Uncovering SIS963 that hid as a SIS503 (compatible=1)
>Enabling SiS 96x SMBus.
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: Embedded Controller [EC0] (gpe 21) interrupt mode.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:04: ioport range 0x8000-0x808f could not be reserved
>pnp: 00:04: ioport range 0x8090-0x80ff has been reserved
>pnp: 00:04: ioport range 0x8100-0x811f has been reserved
>pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f5000000-f5ffffff
>  PREFETCH window: f6000000-fbffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00002400-000024ff
>  IO window: 00002800-000028ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 32000000-33ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
>  IO window: 00002c00-00002cff
>  IO window: 00003000-000030ff
>  PREFETCH window: 34000000-35ffffff
>  MEM window: 36000000-37ffffff
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 177
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>PCI: Enabling device 0000:00:0a.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> IRQ 177
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1141749901.136:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xf8000000, mapped to 0xe0880000, using 6144k, total 32768k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:f7f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 80290 bytes,<6>...found (1024x768, 32624 bytes, v3).
>Console: switching to colour frame buffer device 93x45
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 185
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PWRB COMA  EC0 USB0 USB1 USB2 USB3  ACM  AUD  LAN  CB0  CB1 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 160k freed
>Write protecting the kernel read-only data: 286k
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>SIS5513: chipset revision 0
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: IC25N060ATMR04-0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>Probing IDE interface ide1...
>hdc: SONY CD-RW/DVD-ROM CRX830E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C2])
>ACPI Error (acpi_utils-0377): Expecting a [Package], found type C [20060127]
>ACPI Warning (acpi_thermal-0385): Invalid passive threshold [20060127]
>ACPI: Thermal Zone [ATF0] (58 C)
>Attempting manual resume
>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
>ReiserFS: hda7: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda7: checking transaction log (hda7)
>ReiserFS: hda7: Using r5 hash to sort names
>Adding 1020116k swap on /dev/hda2.  Priority:-1 extents:1 across:1020116k
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 185
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>i2c-sis96x version 1.0.0
>sis900.c: v1.08.09 Sep. 19 2005
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>intel8x0_measure_ac97_clock: measured 55363 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:00:0a.0 [104d:814e]
>Yenta: ISA IRQ mask 0x0438, PCI irq 177
>Socket status: 30000006
>ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:00:0a.1 [104d:814e]
>Yenta: ISA IRQ mask 0x0438, PCI irq 177
>Socket status: 30000006
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 193
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>PCI: cache line size of 128 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:03.3: irq 193, io mem 0xf4003000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc5-git2-2-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:03.3
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 201
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 201, io mem 0xf4000000
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-rc5-git2-2-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:03.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-6: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 209
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 209, io mem 0xf4001000
>usb 1-6: new device found, idVendor=054c, idProduct=014d
>usb 1-6: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-6: Product: USB Memory Stick Slot
>usb 1-6: Manufacturer: Sony
>usb 1-6: SerialNumber: 0052379288879104
>usb 1-6: configuration #1 chosen from 1 choice
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-rc5-git2-2-default ohci_hcd
>usb usb3: SerialNumber: 0000:00:03.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>loop: loaded (max 8 devices)
>NTFS driver 2.1.26 [Flags: R/W MODULE].
>PCI: Enabling device 0000:00:03.2 (0010 -> 0012)
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 217
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 217, io mem 0xf4002000
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16-rc5-git2-2-default ohci_hcd
>usb usb4: SerialNumber: 0000:00:03.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
>agpgart: Detected SiS 648 chipset
>agpgart: AGP aperture is 64M @ 0xf0000000
>ACPI (acpi_bus-0199): Device is not power manageable [20060127]
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 225
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 225, 08:00:46:d2:3c:99.
>NTFS volume version 3.1.
>NTFS-fs warning (device hda1): load_system_files(): Volume is dirty.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ieee1394: Initialized config rom entry `ip1394'
>SCSI subsystem initialized
>ACPI: PCI Interrupt 0000:00:0a.2[A] -> GSI 17 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177]  MMIO=[f4005000-f40057ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
>audit(1141749928.929:2): AppArmor (version 2.0-19.43r6152) initialized
>
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08004603019bd123]
>  Vendor: Sony      Model: MSC-U04           Rev: 3.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi removable disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>ACPI Sony Notebook Control Driver v0.2 successfully installed
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>IA-32 Microcode Update Driver v1.14 unregistered
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>powernow: This module only works with AMD K7 CPUs
>eth0: Media Link On 100mbps full-duplex 
>NET: Registered protocol family 17

Actions: View

Attachments on bug 155761: 71591 | 71592