Attachment 71866 Details for Bug 156266

/var/log/boot.msg

boot.msg (text/plain), 46.38 KB, created by Juergen Orschiedt on 2006-03-08 21:38:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Juergen Orschiedt

Created: 2006-03-08 21:38:13 UTC

Size: 46.38 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.16-rc5-git8-3-default
>Loaded 21275 symbols from /boot/System.map-2.6.16-rc5-git8-3-default.
>Symbols match kernel version 2.6.16.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.16-rc5-git8-3-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Mon Mar 6 23:43:36 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000007ffd1800 (usable)
><4> BIOS-e820: 000000007ffd1800 - 0000000080000000 (reserved)
><4> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
><4> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
><4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
><5>1151MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>No mptable found.
><7>On node 0 totalpages: 524241
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 294865 pages, LIFO batch:31
><6>DMI 2.3 present.
><6>APIC enabled because system is MP or new enough
><7>ACPI: RSDP (v000 DELL                                  ) @ 0x000fc9b0
><7>ACPI: RSDT (v001 DELL    CPi R   0x27d50a02 ASL  0x00000061) @ 0x7ffd1f90
><7>ACPI: FADT (v001 DELL    CPi R   0x27d50a02 ASL  0x00000061) @ 0x7ffd2c00
><7>ACPI: MADT (v001 DELL    CPi R   0x27d50a02 ASL  0x00000047) @ 0x7ffd3400
><7>ACPI: ASF! (v016 DELL    CPi R   0x27d50a02 ASL  0x00000061) @ 0x7ffd3000
><7>ACPI: MCFG (v016 DELL    CPi R   0x27d50a02 ASL  0x00000061) @ 0x7ffd33c0
><7>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x7ffd23e6
><7>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x7ffd220e
><7>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030522) @ 0x7ffd2013
><7>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><4>Processor #0 6:13 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/sda3 vga=0x314 selinux=0    resume=/dev/sda2  splash=silent
><6>bootsplash: silent mode.
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 1995.468 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 2073636k/2096964k available (1489k kernel code, 22060k reserved, 605k data, 156k init, 1179460k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 4000.18 BogoMIPS (lpj=8000360)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
><7>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 2048K
><7>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2164k freed
><4> not found!
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfb5be, last bus=10
><6>PCI: Using MMCONFIG
><6>ACPI: Subsystem revision 20060127
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><4>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
><4>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><4>PCI: Bus #04 (-#07) may be hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 15 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
><6>pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
><6>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
><6>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
><6>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
><6>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
><6>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
><6>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
><6>pnp: 00:08: ioport range 0x900-0x90f has been reserved
><6>pnp: 00:08: ioport range 0x910-0x91f has been reserved
><6>pnp: 00:08: ioport range 0x920-0x92f has been reserved
><6>pnp: 00:08: ioport range 0x93c-0x93f has been reserved
><6>pnp: 00:08: ioport range 0x940-0x97f has been reserved
><6>pnp: 00:0e: ioport range 0x930-0x93b has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: d000-dfff
><6>  MEM window: dfd00000-dfefffff
><6>  PREFETCH window: d0000000-d7ffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: dfc00000-dfcfffff
><6>  PREFETCH window: disabled.
><4>PCI: Bus 4, cardbus bridge: 0000:03:01.0
><4>  IO window: 00002000-000020ff
><4>  IO window: 00002400-000024ff
><4>  PREFETCH window: 88000000-89ffffff
><4>  MEM window: 8a000000-8bffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 2000-2fff
><6>  MEM window: dfb00000-dfbfffff
><6>  PREFETCH window: 88000000-89ffffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
><6>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1141838105.216:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>Allocate Port Service[0000:00:1c.0:pcie03]
><6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 65472k
><6>vesafb: mode is 800x600x16, linelength=1600, pages=67
><6>vesafb: protected mode interface info at c000:5ad3
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><4>Console: switching to colour frame buffer device 100x37
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 209
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 524288 (order: 9, 2097152 bytes)
><4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
><6>TCP: Hash tables configured (established 524288 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI Shortcut mode
><4>ACPI wakeup devices: 
><4> LID PBTN PCI0 USB0 USB1 USB2 USB4 USB3 MODM PCIE  NIC 
><6>ACPI: (supports S0 S3 S4 S5)
><6>Freeing unused kernel memory: 156k freed
><4>Write protecting the kernel read-only data: 281k
><5>SCSI subsystem initialized
><7>libata version 1.20 loaded.
><7>ahci 0000:00:1f.2: version 1.2
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 209
><4>ahci: probe of 0000:00:1f.2 failed with error -12
><7>ata_piix 0000:00:1f.2: version 1.05
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 209
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
><7>ata1: dev 0 cfg 49:2f00 82:346b 83:5b09 84:4003 85:3469 86:1a09 87:4003 88:203f
><6>ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA
><6>ata1(0): applying bridge limits
><6>ata1: dev 0 configured for UDMA/100
><6>scsi0 : ata_piix
><5>  Vendor: ATA       Model: WDC WD800VE-75HD  Rev: 11.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
><6>input: PS/2 Mouse as /class/input/input2
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda:<6>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
><4> sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
><5>sd 0:0:0:0: Attached scsi disk sda
><6>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><7>ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
><6>ata2: dev 0 ATAPI, max UDMA/33
><6>ata2: dev 0 configured for UDMA/33
><6>scsi1 : ata_piix
><5>  Vendor: _NEC      Model: DVD+-RW ND-6650A  Rev: 102C
><5>  Type:   CD-ROM                             ANSI SCSI revision: 05
><5> 1:0:0:0: Attached scsi generic sg1 type 5
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><4>ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x1 [20060127]
><6>ACPI: Thermal Zone [THM] (70 C)
><4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><4>Attempting manual resume
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>Adding 2104504k swap on /dev/sda2.  Priority:-1 extents:1 across:2104504k
><6>parport: PnPBIOS parport detected.
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>lp0: using parport0 (interrupt-driven).
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>USB Universal Host Controller Interface driver v2.3
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bf80
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16-rc5-git8-3-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.0
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
><6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><3>hw_random: cannot enable RNG, aborting
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000bf60
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.16-rc5-git8-3-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><4>ieee80211_crypt: module not supported by Novell, setting U taint flag.
><7>ieee80211_crypt: registered algorithm 'NULL'
><4>ieee80211: module not supported by Novell, setting U taint flag.
><6>ieee80211: 802.11 data/management/control stack, git-1.1.7
><6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
><4>ipw2200: module not supported by Novell, setting U taint flag.
><6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10
><6>ipw2200: Copyright(c) 2003-2005 Intel Corporation
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000bf40
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.16-rc5-git8-3-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.2
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000bf20
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.16-rc5-git8-3-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.3
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb 2-1: new full speed USB device using uhci_hcd and address 2
><6>tg3.c:v3.49 (Feb 2, 2006)
><6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:22:c3:ed:80
><6>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
><6>eth0: dma_rwctrl[76180000]
><6>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1e.2 to 64
><6>usb 2-1: new device found, idVendor=413c, idProduct=8103
><6>usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>eth0 renamed to eth1
><6>usb 4-1: new full speed USB device using uhci_hcd and address 2
><6>usb 4-1: new device found, idVendor=046d, idProduct=c041
><6>usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 4-1: Product: USB Gaming Mouse
><6>usb 4-1: Manufacturer: Logitech
><6>usb 4-1: configuration #1 chosen from 1 choice
><6>Bluetooth: Core ver 2.8
><6>NET: Registered protocol family 31
><6>Bluetooth: HCI device and connection manager initialized
><6>Bluetooth: HCI socket layer initialized
><6>usb 4-2: new full speed USB device using uhci_hcd and address 3
><6>intel8x0_measure_ac97_clock: measured 54098 usecs
><6>intel8x0: clocking to 48000
><6>agpgart: Detected an Intel 915GM Chipset.
><6>agpgart: AGP aperture is 256M @ 0x0
><6>Bluetooth: HCI USB driver ver 2.9
><6>usb 4-2: new device found, idVendor=04b4, idProduct=6560
><6>usb 4-2: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 4-2: configuration #1 chosen from 1 choice
><6>hub 4-2:1.0: USB hub found
><6>hub 4-2:1.0: 4 ports detected
><6>usb 4-2.2: new full speed USB device using uhci_hcd and address 4
><6>usb 4-2.2: new device found, idVendor=04cf, idProduct=8818
><6>usb 4-2.2: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 4-2.2: Product: USB Mass Storage Device
><6>usb 4-2.2: Manufacturer: Myson Century, Inc.
><6>usb 4-2.2: SerialNumber: 100
><6>usb 4-2.2: configuration #1 chosen from 1 choice
><6>usb 4-2.3: new full speed USB device using uhci_hcd and address 5
><6>Initializing USB Mass Storage driver...
><6>usb 4-2.3: new device found, idVendor=0d49, idProduct=5000
><6>usb 4-2.3: new device strings: Mfr=1, Product=3, SerialNumber=2
><6>usb 4-2.3: Product: 5000XT v01.00.00
><6>usb 4-2.3: Manufacturer: Maxtor
><6>usb 4-2.3: SerialNumber: WD-WMAEJ1033
><6>usb 4-2.3: configuration #1 chosen from 1 choice
><6>usb 4-2.4: new full speed USB device using uhci_hcd and address 6
><6>usb 4-2.4: new device found, idVendor=067b, idProduct=3507
><6>usb 4-2.4: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 4-2.4: Manufacturer: ASSMANN Electronic GmbH
><6>usb 4-2.4: SerialNumber: 200508B1FD7
><6>usb 4-2.4: configuration #1 chosen from 1 choice
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
><6>usbcore: registered new driver hci_usb
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
><6>ehci_hcd 0000:00:1d.7: irq 169, io mem 0xffa80800
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb5: new device found, idVendor=0000, idProduct=0000
><6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: EHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.16-rc5-git8-3-default ehci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.7
><6>usb 4-1: USB disconnect, address 2
><6>usbcore: registered new driver hiddev
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 8 ports detected
><6>usb 4-2: USB disconnect, address 3
><6>usb 4-2.2: USB disconnect, address 4
><6>usb 4-2.3: USB disconnect, address 5
><6>usb 4-2.4: USB disconnect, address 6
><6>usb 2-1: USB disconnect, address 2
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 177
><6>Yenta: CardBus bridge found at 0000:03:01.0 [1028:0182]
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:03:01.0, mfunc 0x01111122, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0c78, PCI irq 177
><6>Socket status: 30000820
><6>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
><6>cs: IO port probe 0x2000-0x2fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xdfb00000 - 0xdfbfffff
><6>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
><6>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 209
><6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
><6>eth0 renamed to eth2
><6>usb 5-8: new high speed USB device using ehci_hcd and address 4
><6>usb 5-8: new device found, idVendor=04b4, idProduct=6560
><6>usb 5-8: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 5-8: configuration #1 chosen from 1 choice
><6>hub 5-8:1.0: USB hub found
><6>hub 5-8:1.0: 4 ports detected
><5>pccard: CardBus card inserted into slot 0
><6>cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 0x370-0x37f
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>usb 2-1: new full speed USB device using uhci_hcd and address 3
><6>Linux video capture interface: v1.00
><6>usb 2-1: new device found, idVendor=413c, idProduct=8103
><6>usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>saa7130/34: v4l2 driver version 0.2.14 loaded
><4>PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
><6>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 177
><6>saa7133[0]: found at 0000:04:00.0, rev: 240, irq: 177, latency: 0, mmio: 0x8a000000
><7>PCI: Setting latency timer of device 0000:04:00.0 to 64
><6>saa7133[0]: subsystem: 4e42:0502, board: LifeView/Typhoon FlyDVB-T Duo Cardbus [card=60,autodetected]
><6>saa7133[0]: board init: gpio is e010000
><6>saa7133[0]: i2c eeprom 00: 42 4e 02 05 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
><6>saa7133[0]: i2c eeprom 10: 00 ff 22 0f ff 20 ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 81 ff ff ff ff
><6>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 40: ff 1c 00 c0 ff 10 ff ff c2 96 00 16 22 15 ff ff
><6>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><6>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
><3>tuner: tuner_debug is deprecated and will be removed in 2.6.17.
><3>tuner: use the debug option instead.
><6>usb 4-1: new full speed USB device using uhci_hcd and address 7
><7>tuner 0-004b: Setting mode_mask to 0x0e
><6>tuner 0-004b: chip found @ 0x96 (saa7133[0])
><7>tuner 0-004b: Calling set_type_addr for type=54, addr=0xff, mode=0x04
><7>tuner 0-004b: tuner 0x4b: called during i2c_client register by adapter's attach_inform
><6>tuner 0-004b: setting tuner address to 61
><6>tuner 0-004b: tuner: type set to tda8290+75
><6>usb 4-1: new device found, idVendor=046d, idProduct=c041
><6>usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 4-1: Product: USB Gaming Mouse
><6>usb 4-1: Manufacturer: Logitech
><6>usb 4-1: configuration #1 chosen from 1 choice
><7>tuner 0-004b: saa7133[0] tuner I2C addr 0x96 with type 54 used for 0x0e
><6>saa7133[0]: registered device video0 [v4l2]
><6>saa7133[0]: registered device vbi0
><6>saa7133[0]: registered device radio0
><6>input: Logitech USB Gaming Mouse as /class/input/input4
><6>input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.3-1
><6>hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.3-1
><6>usb 5-8.2: new high speed USB device using ehci_hcd and address 5
><6>usb 5-8.2: new device found, idVendor=04cf, idProduct=8818
><6>usb 5-8.2: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 5-8.2: Product: USB Mass Storage Device
><6>usb 5-8.2: Manufacturer: Myson Century, Inc.
><6>usb 5-8.2: SerialNumber: 100
><6>usb 5-8.2: configuration #1 chosen from 1 choice
><6>scsi2 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 5
><7>usb-storage: waiting for device to settle before scanning
><4>DVB: registering new adapter (saa7133[0]).
><4>DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
><6>saa7134 ALSA driver for DMA sound loaded
><6>saa7133[0]/alsa: saa7133[0] at 0x8a000000 irq 177 registered as card 1
><6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
><7>dm-netlink version 0.0.2 loaded
><6>usb 5-8.3: new high speed USB device using ehci_hcd and address 6
><6>usb 5-8.3: new device found, idVendor=0d49, idProduct=5000
><6>usb 5-8.3: new device strings: Mfr=1, Product=3, SerialNumber=2
><6>usb 5-8.3: Product: 5000XT v01.00.00
><6>usb 5-8.3: Manufacturer: Maxtor
><6>usb 5-8.3: SerialNumber: WD-WMAEJ1033
><6>usb 5-8.3: configuration #1 chosen from 1 choice
><6>scsi3 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 6
><7>usb-storage: waiting for device to settle before scanning
><6>usb 5-8.4: new high speed USB device using ehci_hcd and address 7
><6>loop: loaded (max 8 devices)
><6>usb 5-8.4: new device found, idVendor=067b, idProduct=3507
><6>usb 5-8.4: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 5-8.4: Manufacturer: ASSMANN Electronic GmbH
><6>usb 5-8.4: SerialNumber: 200508B1FD7
><6>usb 5-8.4: configuration #1 chosen from 1 choice
><6>scsi4 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 7
><7>usb-storage: waiting for device to settle before scanning
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda6, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda5, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda8, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>AppArmor: AppArmor (version 2.0-19.43r6152) initialized
><5>audit(1141838126.505:2): AppArmor (version 2.0-19.43r6152) initialized
><4>
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Mar  8 17:15:13 2006
>
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneActivating swap-devices in /etc/fstab...
>doneStarting MD Raid done
>done
>Starting udevd <notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/bin vga=0x314 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/sbin/udevd ]
>udevd-event[1990]: run_program: exec of program '/usr/sbin/alsactl' failed
>
>udevd-event[2456]: run_program: exec of program '/usr/sbin/alsactl' failed
>
>done
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>/dev/disk/by-uuid/c63e5b63-93ff-42d1-bf0f-a48b5f48b346: clean, 66/34136 files, 28250/136520 blocks
>/dev/disk/by-uuid/0d994cff-7c44-48fa-8ccb-629f0debe62b: clean, 261123/5259264 files, 8471653/10500477 blocks
>/dev/disk/by-uuid/459cd972-b73d-425c-964b-16ae09ac5ff3: clean, 125419/502944 files, 850554/1004054 blocks
>/dev/disk/by-uuid/0b1cb11f-a92d-423a-b0c3-11cf882914f9: clean, 203657/1050400 files, 1334030/2098482 blocks
>/dev/disk/by-uuid/0d97a67b-1bbd-43b2-a558-426397ec3365: clean, 14308/1114112 files, 1198172/2227002 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)
>/dev/sda7 on /home type ext3 (rw)
>/dev/sda6 on /opt type ext3 (rw,acl,user_xattr)
>/dev/sda5 on /usr type ext3 (rw,acl,user_xattr)
>/dev/sda8 on /var type ext3 (rw,acl,user_xattr)
>tmpfs on /dev/shm type tmpfs (rw)
>doneSetting up the hardware clockdone
>Loading required kernel modules
>doneRetry device configurationdone
>Loading AppArmor module done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
><notice>killproc: kill(912,29)
>Creating /var/log/boot.msg
>doneSetting up hostname 'TuX-JO01'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>Activating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(912,3)
>
>INIT: Entering runlevel: 5
>
>
><notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon
>Boot logging started on /dev/tty1(/dev/console) at Wed Mar  8 18:15:34 2006
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>udevd already runningdone
> --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
><notice>checkproc: /sbin/udevd 1014
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 SPLASH=no splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda3 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Starting D-BUS daemondone
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/sbin/acpid ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 SPLASH=no splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda3 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>acpid: loading ACPI modules ( ) done
>Starting acpid done
><notice>startproc: execve (/usr/sbin/micasad.sh) [ /usr/sbin/micasad.sh ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/micasad.sh ]
>Initializing random number generatordone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting miCASA daemon
>done
>Starting HAL daemondone
><notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
><notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
>Starting the NetworkManagerdone
>Starting the NetworkManagerDispatcherdone
><notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
>Starting mdnsddone
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/sbin/auditd ]
>Starting auditd done
>Starting ZENworks Management Daemondone
>Starting Samba NMB daemon <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
>done
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
>Importing Net File System (NFS)unused
><notice>startproc: execve (/usr/sbin/gpm) [ /usr/sbin/gpm -m /dev/input/mice -t exps2 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/gpm ]
>Starting console mouse support (gpm)done
>Starting cvslockd <notice>startproc: execve (/usr/bin/cvslockd) [ /usr/bin/cvslockd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/bin/cvslockd ]
>done
>Starting service IrDALoading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done<notice>startproc: execve (/usr/sbin/irattach) [ /usr/sbin/irattach /dev/ttyS1 -s ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/irattach ]
><notice>checkproc: /usr/sbin/NetworkManager 3066
>done
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
><notice>checkproc: /usr/sbin/NetworkManager 3066
>done
>Checking/updating CPU microcode done
>Starting nfsboot (sm-notify) done
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>Try to get initial date and time via NTP from ptbtime1.ptb.deError : Temporary failure in name resolution
>failed
>Starting network time protocol daemon (NTPD)done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
>Starting mail service (Postfix)done
>Starting service MySQL <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ LC_CTYPE= splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
>Starting Samba SMB daemon done
>done
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
>Mount SMB/ CIFS File Systems unused
><notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
>Starting SMPPPDdone
>VMware Workstation is installed, but it has not been (correctly) configured
>for the running kernel. To (re-)configure it, invoke the
>following command: /usr/bin/vmware-config.pl.
>
><notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
><notice>startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/X11R6/bin/gnome splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
>Starting service gdmdone
>Starting INET services. (xinetd)done
>done
>Master Resource Control: runlevel 5 has been reached
>Failed services in runlevel 5: vmware
>Skipped services in runlevel 5: nfs smbfs ufsd
><notice>killproc: kill(2888,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Mar  8 19:22:15 2006
>
>Master Resource Control: previous runlevel: 5, switching to runlevel: 3
><notice>killproc: kill(3973,15)
>Shutting down service gdmdone
>/etc/init.d/kbd stopdone
>Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneMaster Resource Control: runlevel 3 has been reached
><notice>killproc: kill(11574,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Mar  8 19:22:21 2006
>
>Master Resource Control: previous runlevel: 3, switching to runlevel: 5
><notice>killproc: kill(2940,15)
><notice>killproc: kill(2923,15)
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=3 LINES=37 HOME=/ SHLVL=2 SPLASH=no splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda3 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Re-Starting syslog services<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=3 LINES=37 HOME=/ SHLVL=2 SPLASH=no splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda3 _=/sbin/startproc DAEMON=/sbin/klogd ]
>done
><notice>startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x314 RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=3 LINES=37 SHLVL=2 HOME=/ XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/X11R6/bin/gnome splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/sda3 selinux=0 _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
>Starting service gdmdone
>done
>Master Resource Control: runlevel 5 has been reached
><notice>killproc: kill(11690,3)

Actions: View

Attachments on bug 156266: 71866 | 71867 | 71868 | 71869 | 71870