Attachment 72214 Details for Bug 156115

boot.msg for default kotd whith nolapic

boot.msg.default.nolapic (text/plain), 18.91 KB, created by michel munnix on 2006-03-10 11:14:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: michel munnix

Created: 2006-03-10 11:14:30 UTC

Size: 18.91 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.16-rc5-git9-20060309130028-default
>Loaded 21276 symbols from /boot/System.map-2.6.16-rc5-git9-20060309130028-default.
>Symbols match kernel version 2.6.16.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.16-rc5-git9-20060309130028-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Thu Mar 9 13:00:28 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
><4> BIOS-e820: 000000000bff0000 - 000000000bffec00 (ACPI data)
><4> BIOS-e820: 000000000bffec00 - 000000000c000000 (ACPI NVS)
><4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>191MB LOWMEM available.
><6>No mptable found.
><7>On node 0 totalpages: 49136
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 45040 pages, LIFO batch:7
><7>  HighMem zone: 0 pages, LIFO batch:0
><6>DMI 2.3 present.
><4>Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/hda6 splash=verbose desktop noresume showopts apm=off acpi=off nolapic
><6>bootsplash: verbose mode.
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 1024 (order: 10, 16384 bytes)
><4>Detected 597.847 MHz processor.
><6>Using tsc for high-res timesource
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
><6>Memory: 189348k/196544k available (1489k kernel code, 6660k reserved, 609k data, 156k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 1197.29 BogoMIPS (lpj=2394586)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 128K
><7>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>CPU: Intel Celeron (Coppermine) stepping 06
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2246k freed
><6>NET: Registered protocol family 16
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd9af, last bus=3
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20060127
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><7>Boot video device is 0000:00:04.0
><6>PCI: Using IRQ router PIIX/ICH [8086/7198] at 0000:00:07.0
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><4>PCI: Bus 1, cardbus bridge: 0000:00:02.0
><4>  IO window: 00001000-000010ff
><4>  IO window: 00001400-000014ff
><4>  PREFETCH window: 10000000-11ffffff
><4>  MEM window: 12000000-13ffffff
><6>PCI: Found IRQ 11 for device 0000:00:02.0
><6>PCI: Sharing IRQ 11 with 0000:00:04.0
><6>IBM machine detected. Enabling interrupts during APM calls.
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: disabled on user request.
><6>audit: initializing netlink socket (disabled)
><5>audit(1141988137.016:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a National Semiconductor PC87306
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
><6>input: TPPS/2 IBM TrackPoint as /class/input/input1
><6>input: PC Speaker as /class/input/input2
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
><4>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
><4>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
><6>TCP: Hash tables configured (established 8192 bind 8192)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI Shortcut mode
><6>Freeing unused kernel memory: 156k freed
><4>Write protecting the kernel read-only data: 281k
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>PIIX4: IDE controller at PCI slot 0000:00:07.1
><6>PIIX4: chipset revision 0
><6>PIIX4: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:DMA
><7>Probing IDE interface ide0...
><4>hda: IBM-DJSA-210, ATA DISK drive
><4>hdb: CD-224E, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 128KiB
><6>hda: 19640880 sectors (10056 MB) w/384KiB Cache, CHS=20784/15/63, UDMA(33)
><6>hda: cache flushes not supported
><6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
><5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda6: using ordered data mode
><4>reiserfs: using flush barriers
><5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda6: checking transaction log (hda6)
><4>reiserfs: disabling flush barriers on hda6
><5>ReiserFS: hda6: Using r5 hash to sort names
><6>Adding 1959888k swap on /dev/hda7.  Priority:-1 extents:1 across:1959888k
><6>parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
><6>lp0: using parport0 (polling).
><6>PCI: Found IRQ 11 for device 0000:00:03.0
><6>PCI: Sharing IRQ 11 with 0000:00:03.1
><4>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
><6>0000:00:03.0: 3Com PCI 3c556B Laptop Hurricane at cc87a400. Vers LK1.1.19
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>PCI: Found IRQ 11 for device 0000:00:00.1
><7>PCI: Setting latency timer of device 0000:00:00.1 to 64
><6>USB Universal Host Controller Interface driver v2.3
><6>hdb: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><6>intel8x0_measure_ac97_clock: measured 56598 usecs
><6>intel8x0: clocking to 48000
><6>PCI: Found IRQ 11 for device 0000:00:07.2
><6>uhci_hcd 0000:00:07.2: UHCI Host Controller
><6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16-rc5-git9-20060309130028-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:07.2
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>PCI: Found IRQ 11 for device 0000:00:02.0
><6>PCI: Sharing IRQ 11 with 0000:00:04.0
><6>Yenta: CardBus bridge found at 0000:00:02.0 [1014:01d6]
><6>Yenta: adjusting diagnostic: 40 -> 60
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:02.0, mfunc 0x01c21000, devctl 0x66
><6>Yenta: ISA IRQ mask 0x06b8, PCI irq 11
><6>Socket status: 30000006
><6>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
><3>piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt your serial eeprom! Refusing to load module!
><4>piix4_smbus: probe of 0000:00:07.3 failed with error -1
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
><7>dm-netlink version 0.0.2 loaded
><6>loop: loaded (max 8 devices)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Mar 10 10:55:46 2006
>
>Configuring serial ports...
>Configured serial ports
>doneActivating swap-devices in /etc/fstab...
>donedone
><notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/bin DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/udevd ]
>Starting MD Raid mdadm: No arrays found in config file
>failed
>Starting udevd done
>Activating device mapper...
>Creating /dev/mapper/control character device with major:10 minor:63.
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>nothing was mounted
>doneLoading AppArmor module done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles Loading required kernel modules
>doneSetting up the hardware clockdone
>done
>done
>Setting up hostname 'linux'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>Creating /var/log/boot.msg
>done<notice>killproc: kill(722,29)
>Activating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>done
>System Boot Control: The system has been set up
>Failed features: boot.md
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(722,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Fri Mar 10 10:56:06 2006
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>
>INIT: Entering runlevel: 5
>
>
><notice> /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
>Starting D-BUS daemondone
>startproc: execve (/usr/bin/dbus-daemon) [acpid: no ACPI support in kernelskipped
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 acpi=off HOME=/ SHLVL=2 SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=25 acpi=off HOME=/ SHLVL=2 SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Initializing random number generatordone
>Starting HAL daemondone
>Loading keymap i386/azerty/be-latin1.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneSetting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>done    eth0      device: 3Com Corporation 3c556B CardBus [Tornado] (rev 20)
>    eth0      configuration: eth-id-00:01:03:84:86:6e
>    eth0      is controlled by ifplugd
>waiting
>    eth0      device: 3Com Corporation 3c556B CardBus [Tornado] (rev 20)
>    eth0      configuration: eth-id-00:01:03:84:86:6e
>    eth0      ifplugd is running
>    eth0      cable is connected
>    eth0      IP address: 10.3.3.233/16
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
>Starting mdnsddone
>Starting ZENworks Management Daemondone
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Importing Net File System (NFS)unused
>Mount SMB/ CIFS File Systems unused
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/auditd ]
>Starting auditd done
>Starting nfsboot (sm-notify) done
>Checking/updating CPU microcode done
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
> PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>Starting powersaved: done
>Try to get initial date and time via NTP from 10.3.3.3done
>Starting network time protocol daemon (NTPD)done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
><notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=fr_FR.UTF-8 PREVLEVEL=N LINES=25 acpi=off HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>Starting service kdmdone
><notice>checkproc: /opt/kde3/bin/kdm 2952
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Starting mail service (Postfix)done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: acpid smbfs nfs splash
><notice>killproc: kill(1755,3)

Actions: View

Attachments on bug 156115: 71798 | 71908 | 71910 | 71940 | 72213 | 72214 | 72215 | 72285 | 74904 | 75882 | 75898 | 75914 | 75928 | 82509