Attachment 73849 Details for Bug 155561

dmesg output

dmesg.txt (text/plain), 22.02 KB, created by K. De Hoop on 2006-03-19 18:19:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: K. De Hoop

Created: 2006-03-19 18:19:10 UTC

Size: 22.02 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/md1 vga=0x31a selinux=0    resume=/dev/sda5  splash=silent showopts)
>Linux version 2.6.13-15.8-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Feb 7 11:07:24 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa7c0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x12000530 MSFT 0x00000097) @ 0x000000007ffb0000
>ACPI: FADT (v001 A M I  OEMFACP  0x12000530 MSFT 0x00000097) @ 0x000000007ffb0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x12000530 MSFT 0x00000097) @ 0x000000007ffb0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x12000530 MSFT 0x00000097) @ 0x000000007ffc0040
>ACPI: DSDT (v001  A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
>On node 0 totalpages: 524111
>  DMA zone: 3999 pages, LIFO batch:1
>  Normal zone: 520112 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 80000000:7f780000)
>Checking aperture...
>CPU 0: aperture @ f0000000 size 128 MB
>Built 1 zonelists
>Kernel command line: root=/dev/md1 vga=0x31a selinux=0    resume=/dev/sda5  splash=silent showopts
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1802.398 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Memory: 2054644k/2096832k available (2291k kernel code, 41384k reserved, 827k data, 176k init)
>Calibrating delay using timer specific routine.. 3613.10 BogoMIPS (lpj=7226205)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>Using local APIC timer interrupts.
>Detected 12.516 MHz APIC timer.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 128M @ 0xf0000000
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fb000000-fbffffff
>  PREFETCH window: f8000000-f9ffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1142791777.708:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20000100000, using 10240k, total 32768k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI0 PS2K PS2M UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 176k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>logips2pp: Detected unknown logitech mouse model 127
>libata version 1.12 loaded.
>input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
>sata_via version 1.1
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
>PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
>sata_via(0000:00:0f.0): routed to hard irq line 9
>ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC000 irq 169
>ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xC008 irq 169
>ata1: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:407f
>ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
>ata1(0): applying bridge limits
>ata1: dev 0 configured for UDMA/100
>scsi0 : sata_via
>ata2: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:407f
>ata2: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
>ata2: dev 0 configured for UDMA/133
>scsi1 : sata_via
>  Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 21.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 >
>Losing some ticks... checking if CPU frequency changed.
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sdb: drive cache: write back
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1])
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x2
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>md: raid1 personality registered as nr 3
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb6 ...
>md:  adding sdb6 ...
>md: sdb2 has different UUID to sdb6
>md: sdb1 has different UUID to sdb6
>md:  adding sda6 ...
>md: sda2 has different UUID to sdb6
>md: sda1 has different UUID to sdb6
>md: created md2
>md: bind<sda6>
>md: bind<sdb6>
>md: running: <sdb6><sda6>
>md: personality 2 is not loaded!
>md: do_md_run() returned -22
>md: md2 stopped.
>md: unbind<sdb6>
>md: export_rdev(sdb6)
>md: unbind<sda6>
>md: export_rdev(sda6)
>md: considering sdb2 ...
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdb2
>md:  adding sda2 ...
>md: sda1 has different UUID to sdb2
>md: created md1
>md: bind<sda2>
>md: bind<sdb2>
>md: running: <sdb2><sda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>ReiserFS: md1: found reiserfs format "3.6" with standard journal
>ReiserFS: md1: using ordered data mode
>ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: md1: checking transaction log (md1)
>ReiserFS: md1: Using r5 hash to sort names
>md: md2 stopped.
>md: bind<sdb6>
>md: bind<sda6>
>md: raid0 personality registered as nr 2
>md2: setting max_sectors to 64, segment boundary to 16383
>raid0: looking at sda6
>raid0:   comparing sda6(65657536) with sda6(65657536)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdb6
>raid0:   comparing sdb6(65657536) with sda6(65657536)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 131315072 blocks.
>raid0 : conf->hash_spacing is 131315072 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: Autodetecting RAID arrays.
>md: could not bd_claim sdb6.
>md: could not bd_claim sda6.
>md: autorun ...
>md: ... autorun DONE.
>Adding 514040k swap on /dev/sda5.  Priority:-1 extents:1
>Adding 514040k swap on /dev/sdb5.  Priority:-2 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: md0: found reiserfs format "3.6" with standard journal
>ReiserFS: md0: using ordered data mode
>ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: md0: checking transaction log (md0)
>ReiserFS: md0: Using r5 hash to sort names
>ReiserFS: md2: found reiserfs format "3.6" with standard journal
>ReiserFS: md2: using ordered data mode
>ReiserFS: md2: journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: md2: checking transaction log (md2)
>ReiserFS: md2: Using r5 hash to sort names
>parport0: PC-style at 0x378 [PCSPP]
>lp0: using parport0 (polling).
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff803cf500(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 177
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:09.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xa800. Vers LK1.1.19
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185
>0000:00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xb400. Vers LK1.1.19
>sk98lin: no version for "struct_module" found: kernel tainted.
>sk98lin: module not supported by Novell, setting U taint flag.
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193
>sk98lin: Network Device Driver v8.30.2.3
>(C)Copyright 1999-2005 Marvell(R).
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193
>eth2: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
>      PrefPort:A  RlmtMode:Check Link State
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
>PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 201, io base 0x0000d800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201
>PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 201, io base 0x0000e000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 201
>PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 201, io base 0x0000e400
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201
>PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 9
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.4: irq 201, io mem 0xfaf00000
>ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
>PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
>matroxfb: Matrox G450 detected
>matroxfb: probe of 0000:01:00.0 failed with error -1
>Driver for 1-wire Dallas network protocol.
>matrox_w1 0000:01:00.0: Matrox G400 GPIO transport layer for 1-wire.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185
>eth2: network connection up using port A
>    speed:           1000
>    autonegotiation: yes
>    duplex mode:     full
>    flowctrl:        symmetric
>    role:            master
>    irq moderation:  disabled
>    scatter-gather:  enabled
>    tx-checksum:     enabled
>    rx-checksum:     enabled
>    rx-polling:      enabled
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>vmmon: module not supported by Novell, setting U taint flag.
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[5590]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[5590]: Module vmmon: initialized
>vmnet: module not supported by Novell, setting U taint flag.
>/dev/vmnet: open called by PID 5639 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth2: enabling the bridge
>bridge-eth2: up
>bridge-eth2: already up
>bridge-eth2: attached
>/dev/vmnet: open called by PID 5661 (vmnet-bridge)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>bridge-eth1: enabling the bridge
>bridge-eth1: up
>bridge-eth1: already up
>bridge-eth1: attached
>/dev/vmnet: open called by PID 5666 (vmnet-bridge)
>/dev/vmnet: hub 2 does not exist, allocating memory.
>/dev/vmnet: port on hub 2 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
>powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
>cpu_init done, current fid 0xa, vid 0x6
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>[drm] Initialized drm 1.0.0 20040925
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
>[drm] Initialized mga 3.1.0 20021029 on minor 0: 
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Device is in legacy mode, falling back to 2.x
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>/dev/vmnet: open called by PID 5970 (vmware-vmx)
>eth0: Setting promiscuous mode.
>device eth0 entered promiscuous mode
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 2 successfully opened
>/dev/vmnet: open called by PID 5970 (vmware-vmx)
>eth1: Setting promiscuous mode.
>device eth1 entered promiscuous mode
>bridge-eth1: enabled promiscuous mode
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 5970 (vmware-vmx)
>device eth2 entered promiscuous mode
>bridge-eth2: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>/dev/vmmon[6032]: fast clock rate 0 -> 19
>eth2: no IPv6 routers present
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>/dev/vmmon[6032]: fast clock rate 19 -> 0
>/dev/vmmon[6032]: fast clock rate 0 -> 100
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>printk: 3 messages suppressed.
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>/dev/vmmon[6032]: fast clock rate 100 -> 101
>end_request: I/O error, dev fd0, sector 0
>floppy0: disk absent or changed during operation
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>/dev/vmmon[6032]: fast clock rate 101 -> 100

Actions: View

Attachments on bug 155561: 73849 | 73850 | 73851 | 73852 | 73853 | 73854 | 74171