Attachment 74794 Details for Bug 121899

dmesg text file for new kernel

dmesg-2.6.16.txt (text/plain), 18.75 KB, created by jonah naylor on 2006-03-23 19:32:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jonah naylor

Created: 2006-03-23 19:32:43 UTC

Size: 18.75 KB

patch

obsolete

>Linux version 2.6.16-20060322151841-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Wed Mar 22 15:18:41 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002bff0000 (usable)
> BIOS-e820: 000000002bff0000 - 000000002bffffc0 (ACPI data)
> BIOS-e820: 000000002bffffc0 - 000000002c000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>703MB LOWMEM available.
>No mptable found.
>On node 0 totalpages: 180208
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 176112 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.3 present.
>IO/L-APIC allowed because system is MP or new enough
>ATI board detected. Disabling timer routing over 8254.
>ACPI: RSDP (v000 OID_00                                ) @ 0x000e6010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x2bffb60f
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x2bfffa90
>ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x2bfffb20
>ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x2bfffb90
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x2bffb822
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030522) @ 0x2bffb647
>ACPI: DSDT (v001 TOSINV   Avani2 0x00001004 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent  showopts
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2800.565 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 709420k/720832k available (1488k kernel code, 10804k reserved, 606k data, 156k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5606.86 BogoMIPS (lpj=11213733)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 04
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1673k freed
> not found!
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xe9964, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNK0] (IRQs 5 7 10 *11)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11)
>ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 10 11)
>ACPI: Embedded Controller [EC0] (gpe 7) interrupt mode.
>ACPI: Power Resource [PUT2] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: Power Resource [PFA1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:07: ioport range 0x200-0x20f has been reserved
>pnp: 00:07: ioport range 0x280-0x29f has been reserved
>pnp: 00:07: ioport range 0x40b-0x40b has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: e0000000-efffffff
>  PREFETCH window: a0000000-afffffff
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 0000a400-0000a4ff
>  IO window: 0000a800-0000a8ff
>  PREFETCH window: 90000000-91ffffff
>  MEM window: d2000000-d3ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-bfff
>  MEM window: d0000000-dfffffff
>  PREFETCH window: 90000000-9fffffff
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 177
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1143141394.880:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xa0000000, mapped to 0xec880000, using 6144k, total 65472k
>vesafb: mode is 1024x768x16, linelength=2048, pages=41
>vesafb: protected mode interface info at c000:51d1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 7, 524288 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
> LID USB0 USB1 USB2 MC97  P2P LAN0 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 156k freed
>Write protecting the kernel read-only data: 281k
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: HTS424040M9AT00, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide_acpi_hwif_get_handle: ENTER: device ide0
>ide_get_dev_handle: ENTER: pci 00:14.1
>ide_get_dev_handle: for dev=0x14.1, addr=0x140001, parent=0xdff61800, *handle=0xdffe67a0
>ide_acpi_hwif_get_handle: chan adr=0: handle=0xdffe64a0
>ide_acpi_init: ACPI methods disabled on boot
>hda: max request size: 512KiB
>hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>Probing IDE interface ide1...
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
>synaptics: Toshiba Satellite Pro A60 detected, limiting rate to 40pps.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide_acpi_hwif_get_handle: ENTER: device ide1
>ide_get_dev_handle: ENTER: pci 00:14.1
>ide_get_dev_handle: for dev=0x14.1, addr=0x140001, parent=0xdff61800, *handle=0xdffe67a0
>ide_acpi_hwif_get_handle: chan adr=1: handle=0xdffe6360
>ide_acpi_init: ACPI methods disabled on boot
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI Error (acpi_processor-0488): Getting cpuindex for acpiid 0x1 [20060127]
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Thermal Zone [THZN] (63 C)
>ACPI: Fan [FAN1] (off)
>Attempting manual resume
>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>ReiserFS: hda2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda2: checking transaction log (hda2)
>ReiserFS: hda2: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1052216k swap on /dev/hda1.  Priority:-1 extents:1 across:1052216k
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 177
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 177, io mem 0x30000000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-20060322151841-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected Ati IGP7000/M chipset
>agpgart: AGP aperture is 64M @ 0xb0000000
>ip_tables: (C) 2000-2006 Netfilter Core Team
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 177
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 177, io mem 0xf0001000
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16-20060322151841-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (5631 buckets, 45048 max) - 232 bytes per conntrack
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 177
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 177, io mem 0xf0002000
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16-20060322151841-default ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-2: new device found, idVendor=07ab, idProduct=fccd
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: FHD-Classic
>usb 1-2: Manufacturer: Freecom Technologies
>usb 1-2: SerialNumber: FW436_0B29140042F9AA27
>usb 1-2: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
>ALSA sound/pci/atiixp.c:518: atiixp: codec reset timeout
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>usb 2-3: new device found, idVendor=046d, idProduct=c00e
>usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3: Product: USB-PS/2 Optical Mouse
>usb 2-3: Manufacturer: Logitech
>usb 2-3: configuration #1 chosen from 1 choice
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>8139cp: pci dev 0000:02:07.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp: Try the "8139too" driver instead.
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 19 (level, low) -> IRQ 177
>8139too Fast Ethernet driver 0.9.27
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[d0000000-d00007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 18 (level, low) -> IRQ 201
>eth0: RealTek RTL8139 at 0xed338000, 00:a0:d1:b6:50:cc, IRQ 201
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
>Yenta: ISA IRQ mask 0x0c78, PCI irq 177
>Socket status: 30000020
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
>cs: IO port probe 0xa000-0xbfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xdfffffff
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
>pccard: CardBus card inserted into slot 0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d1b650cc]
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-3
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x220-0x227 0x300-0x307 0x310-0x317
>cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcd7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>bootsplash: status on console 0 changed to on
>  Vendor: HDS72251  Model: 6VLAT20           Rev: V34O
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>usb-storage: device scan complete
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Driver 'sd' needs updating - please use bus_type methods
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>usb 1-2: reset high speed USB device using ehci_hcd and address 2
>ACPI: AC Adapter [AC] (off-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 not 'upgrading' to earlier revision 0x13 (current=0x14)
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>usb 1-2: failed to restore interface 0 altsetting 0 (error=-110)
>usb 1-2: USB disconnect, address 2
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
>sd 0:0:0:0: Attached scsi disk sda
>usb 1-2: new high speed USB device using ehci_hcd and address 4
>usb 1-2: device descriptor read/64, error -71
>usb 1-2: new device found, idVendor=07ab, idProduct=fccd
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: FHD-Classic
>usb 1-2: Manufacturer: Freecom Technologies
>usb 1-2: SerialNumber: FW436_0B29140042F9AA27
>usb 1-2: configuration #1 chosen from 1 choice
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>powernow: This module only works with AMD K7 CPUs
>ACPI Exception (osl-0933): AE_TIME, Failed to acquire semaphore[dffe6d60|1|0], AE_TIME [20060127]
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>  Vendor: HDS72251  Model: 6VLAT20           Rev: V34O
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 1:0:0:0: Attached scsi disk sda
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>usb-storage: device scan complete
>sonypi: Sony Programmable I/O Controller Driver v1.26.

Actions: View

Attachments on bug 121899: 53784 | 53785 | 54204 | 54205 | 74794 | 75368