Bugzilla – Attachment 74956 Details for
Bug 156399
Cannot connect to wlan using (k) networkmanager
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
output of various commands regarding hardware, wlan and ndiswrapper
miscwlaninfo.txt (text/plain), 4.81 KB, created by
Martin Schlander
on 2006-03-24 16:55:36 UTC
(
hide
)
Description:
output of various commands regarding hardware, wlan and ndiswrapper
Filename:
MIME Type:
Creator:
Martin Schlander
Created:
2006-03-24 16:55:36 UTC
Size:
4.81 KB
patch
obsolete
>linux-ycug:/home/cb400f # ifconfig >eth0 Link encap:Ethernet HWaddr 00:D0:59:65:46:30 > inet addr:192.168.1.181 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::2d0:59ff:fe65:4630/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:405 errors:0 dropped:0 overruns:0 frame:0 > TX packets:45 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:51772 (50.5 Kb) TX bytes:5324 (5.1 Kb) > >lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:85 errors:0 dropped:0 overruns:0 frame:0 > TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:6046 (5.9 Kb) TX bytes:6046 (5.9 Kb) > >wlan0 Link encap:Ethernet HWaddr 00:0C:41:C7:54:04 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 b) TX bytes:328 (328.0 b) > Interrupt:11 Memory:32000000-32002000 > > > > > > >linux-ycug:/home/cb400f # iwconfig >lo no wireless extensions. > >eth0 no wireless extensions. > >wlan0 IEEE 802.11g ESSID:"Linux Wireless" > Mode:Managed Frequency:2.462 GHz Access Point: 00:90:4C:7E:00:64 > Bit Rate:54 Mb/s Tx-Power:25 dBm > RTS thr:2347 B Fragment thr:2346 B > Encryption key:off > Power Management:off > Link Quality:100/100 Signal level:-45 dBm Noise level:-256 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >sit0 no wireless extensions. > > > > > > > >linux-ycug:/home/cb400f # lspci >00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) >00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) >00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) >00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) >00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) >00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) >00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) >00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) >00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) >00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 09) >00:09.1 Serial controller: Agere Systems LT WinModem >01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) >02:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) > > > > > >linux-ycug:/home/cb400f # dmesg | grep ndis >ndiswrapper: module not supported by Novell, setting U taint flag. >ndiswrapper version 1.10 loaded (preempt=no,smp=no) >ndiswrapper: driver lsbcmnds (The Linksys Group, Inc.,02/14/2005, 3.90.36.0) loaded >ndiswrapper: using irq 11 >wlan0: ndiswrapper ethernet device 00:0c:41:c7:54:04 using driver lsbcmnds, 14E4:4320:1737:4320.5.conf >linux-ycug:/home/cb400f # > > > > > >linux-ycug:/home/cb400f # ndiswrapper -l >Installed drivers: >lsbcmnds driver installed, hardware present >linux-ycug:/home/cb400f # > > > > > >linux-ycug:/home/cb400f # lsmod | grep ndis >ndiswrapper 157996 0 >usbcore 109700 3 ndiswrapper,uhci_hcd >linux-ycug:/home/cb400f # > > > > > >linux-ycug:/home/cb400f # hwinfo --wlan >13: PCI 200.0: 0280 Network controller > [Created at pci.295] > UDI: /org/freedesktop/Hal/devices/pci_14e4_4320 > Unique ID: y9sn.zznVtj+CUf6 > Parent ID: 8otl.+rVhPC2vpUF > SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 > SysFS BusID: 0000:02:00.0 > Hardware Class: network > Model: "Linksys WPC54G" > Hotplug: CardBus > Socket: 0 > Vendor: pci 0x14e4 "Broadcom" > Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller" > SubVendor: pci 0x1737 "Linksys" > SubDevice: pci 0x4320 "WPC54G" > Revision: 0x03 > Driver: "ndiswrapper" > Device File: wlan0 > Features: WLAN > Memory Range: 0x32000000-0x32001fff (rw,non-prefetchable) > IRQ: 11 (no events) > HW Address: 00:0c:41:c7:54:04 > Link detected: no > WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 > WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 > WLAN bitrates: 6 9 12 18 > WLAN encryption modes: WEP40 WEP104 > WLAN authentication modes: open sharedkey wpa-psk wpa-eap > Module Alias: "pci:v000014E4d00004320sv00001737sd00004320bc02sc80i00" > Config Status: cfg=no, avail=yes, need=no, active=unknown > Attached to: #3 (CardBus bridge) >linux-ycug:/home/cb400f # > > > >
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 156399
:
71945
|
71968
|
71969
|
74955
| 74956