Attachment 80706 Details for Bug 116382

serial console of the crash

nosmp_crash.txt (text/plain), 10.09 KB, created by Joachim Deguara on 2006-04-28 08:19:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Deguara

Created: 2006-04-28 08:19:17 UTC

Size: 10.09 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda1 selinux=0      splash=silent nosmp console=ttyS0,57600)
>Linux version 2.6.16-rc6-git1-4-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Tue Mar 14 18:04:33 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
> BIOS-e820: 00000000dfff0000 - 00000000dffff000 (ACPI data)
> BIOS-e820: 00000000dffff000 - 00000000e0000000 (ACPI NVS)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: PXM 1 -> APIC 2 -> Node 1
>SRAT: PXM 1 -> APIC 3 -> Node 1
>SRAT: Node 0 PXM 0 100000-e0000000
>SRAT: Node 1 PXM 1 120000000-220000000
>SRAT: Node 0 PXM 0 100000-120000000
>SRAT: Node 0 PXM 0 0-120000000
>Bootmem setup node 0 0000000000000000-0000000120000000
>Bootmem setup node 1 0000000120000000-0000000220000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3 15:1 APIC version 16
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x05] address[0xfebff000] gsi_base[24])
>IOAPIC[1]: apic_id 5, version 17, address 0xfebff000, GSI 24-27
>ACPI: IOAPIC (id[0x06] address[0xfebfe000] gsi_base[28])
>IOAPIC[2]: apic_id 6, version 17, address 0xfebfe000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e2000000 (gap: e0000000:1f780000)
>Checking aperture...
>CPU 0: aperture @ e0000000 size 256 MB
>CPU 1: aperture @ e0000000 size 256 MB
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>Built 2 zonelists
>Kernel command line: root=/dev/sda1 selinux=0      splash=silent nosmp console=ttyS0,57600
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>Disabling vsyscall due to use of PM timer
>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
>time.c: Detected 2188.695 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Memory: 8247308k/8912896k available (1868k kernel code, 140848k reserved, 868k data, 184k init)
>Calibrating delay using timer specific routine.. 4388.34 BogoMIPS (lpj=8776697)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Node 0 -> Core 0
>checking if image is initramfs... it is
>Freeing initrd memory: 2429k freed
> not found!
>SMP mode deactivated, forcing use of dummy APIC emulation.
>SMP disabled
>Brought up 1 CPUs
>testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
>migration_cost=0
>DMI 2.3 present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ e0000000 size 262144 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 256MB of IOMMU area in the AGP aperture
>PCI: Bridge: 0000:00:06.0
>  IO window: 9000-bfff
>  MEM window: fc900000-feafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: fc800000-fc8fffff
>  PREFETCH window: ff500000-ff5fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1146240136.508:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. pci_msi_quirk set.
>PCI: MSI quirk detected. pci_msi_quirk set.
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>input: PC Speaker as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI1 USB0 USB1 MBE0 PS2K PS2M UAR1 UAR2 GOLA GLAN GOLB SMBC AC97 MODM PWRB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 337k
>Starting udevd
>Creating devices
>Loading ide-core
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Loading ide-disk
>Loading scsi_mod
>SCSI subsystem initialized
>Loading sd_mod
>Loading amd74xxAMD8111: IDE controller at PCI slot 0000:00:07.1
>
>AMD8111: chipset revision 3
>AMD8111: not 100% native mode: will probe irqs later
>AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>hda: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Loading libata
>Loading sata_sil
>ERROR: Unable to locate IOAPIC for GSI 19
>No IOAPIC for GSI 19
>ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 0
>ata1: SATA max UDMA/100 cmd 0xFFFFC2000001CC80 ctl 0xFFFFC2000001CC8A bmdma 0xFFFFC2000001CC00 irq 0
>ata2: SATA max UDMA/100 cmd 0xFFFFC2000001CCC0 ctl 0xFFFFC2000001CCCA bmdma 0xFFFFC2000001CC08 irq 0
>ata3: SATA max UDMA/100 cmd 0xFFFFC2000001CE80 ctl 0xFFFFC2000001CE8A bmdma 0xFFFFC2000001CE00 irq 0
>ata4: SATA max UDMA/100 cmd 0xFFFFC2000001CEC0 ctl 0xFFFFC2000001CECA bmdma 0xFFFFC2000001CE08 irq 0
>Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 
><ffffffff8024d524>{make_class_name+34}
>PGD 11b15a067 PUD 11b1fd067 PMD 0 
>Oops: 0000 [1] SMP 
>last sysfs file: /block/ram9/uevent
>CPU 0 
>Modules linked in: sata_sil libata amd74xx sd_mod scsi_mod ide_disk ide_core
>Pid: 738, comm: modprobe Not tainted 2.6.16-rc6-git1-4-smp #1
>RIP: 0010:[<ffffffff8024d524>] <ffffffff8024d524>{make_class_name+34}
>RSP: 0000:ffff81011b2cda78  EFLAGS: 00010296
>RAX: ffffffff88059b00 RBX: fffffffffffffff4 RCX: ffffffffffffffff
>RDX: ffff81011b254388 RSI: ffffffffffffffff RDI: 0000000000000000
>RBP: ffff81011b254388 R08: 0000000000000000 R09: ffffc2000001ce08
>R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff88059b88
>R13: ffffffff88059ac0 R14: 0000000000000000 R15: 0000000000000000
>FS:  00002b9e874886d0(0000) GS:ffffffff80439000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000000 CR3: 000000011b253000 CR4: 00000000000006e0
>Process modprobe (pid: 738, threadinfo ffff81011b2cc000, task ffff81011bfe1810)
>Stack: ffffc2000001cec0 ffffc2000001ceca 00000000000000d4 ffff81011b254388 
>       ffffffff88059b78 ffffffff8024d7a1 00000000ffffffff ffff81011b254388 
>       ffff81011b254000 0000000000000246 
>Call Trace: <ffffffff8024d7a1>{class_device_del+188}
>       <ffffffff8024d85c>{class_device_unregister+9} <ffffffff88038989>{:scsi_mod:scsi_remove_host+228}
>       <ffffffff88073b28>{:libata:ata_host_remove+16} <ffffffff880771bb>{:libata:ata_device_add+2516}
>       <ffffffff88088599>{:sata_sil:sil_init_one+918} <ffffffff801f05cd>{pci_device_probe+247}
>       <ffffffff8024cbe4>{driver_probe_device+82} <ffffffff8024cd3f>{__driver_attach+142}
>       <ffffffff8024ccb1>{__driver_attach+0} <ffffffff8024c5ec>{bus_for_each_dev+67}
>       <ffffffff8024c25c>{bus_add_driver+126} <ffffffff801f07d6>{__pci_register_driver+128}
>       <ffffffff801518e7>{stop_machine_run+56} <ffffffff8014ac57>{sys_init_module+6184}
>       <ffffffff801570ed>{__generic_file_aio_read+334} <ffffffff8016736a>{do_mmap_pgoff+1522}
>       <ffffffff80179090>{vfs_read+203} <ffffffff8010a7aa>{system_call+126}
>
>Code: f2 ae 48 8b 45 60 48 89 ca 48 89 f1 be d0 00 00 00 48 f7 d2 
>RIP <ffffffff8024d524>{make_class_name+34} RSP <ffff81011b2cda78>
>CR2: 0000000000000000
> /init: line 434:   738 Killed   <6>ACPI: Processor [CPU1] (supports               m 8 throttling statesodprobe sata_sil)
> $params
>Loading processor
>Loading thermal
>Loading fan
>Waiting for udev to settle: . ok
>Loading reiserfs
>Waiting for udev to settle: . ok
>Waiting for device /dev/sda1 to appear: ..........not found -- exiting to /bin/sh
>$

Actions: View

Attachments on bug 116382: 80706