Attachment 84155 Details for Bug 176249

dmesg from SuSE 9.3 x86_64 live

dmesg9.3.txt (text/plain), 17.48 KB, created by Ridvan Agar on 2006-05-18 16:47:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ridvan Agar

Created: 2006-05-18 16:47:34 UTC

Size: 17.48 KB

patch

obsolete

>Linux version 2.6.11.4-20a-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Wed Mar 23 21:52:37 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fea0000 (usable)
> BIOS-e820: 000000003fea0000 - 000000003feaf000 (ACPI data)
> BIOS-e820: 000000003feaf000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6bf0
>On node 0 totalpages: 261792
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:16
>  HighMem zone: 32416 pages, LIFO batch:7
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6c50
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x3fea9389
>ACPI: FADT (v001 Clevo           0x06040000 PTL  0x00000003) @ 0x3feaee21
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x3feaee95
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x3feaeefd
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3feaef65
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x3feaef8d
>ACPI: SSDT (v001 PTLTD  ACPIHT   0x06040000  LTP 0x00000001) @ 0x3feaefc9
>ACPI: DSDT (v001  INTEL GRANTSDL 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: INTEL    Product ID: GRANTSDALE   APIC at: 0xFEE00000
>Processor #0 15:4 APIC version 20
>I/O APIC #2 Version 32 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=lilive initrd=inlive64 splash=silent x11i=vesa lang=de
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 3592.013 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 995084k/1047168k available (1865k kernel code, 51344k reserved, 659k data, 204k init, 129664k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 7110.65 BogoMIPS (lpj=3555328)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000659d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000659d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000659d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Pentium(R) 4 CPU 3.60GHz stepping 03
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 39189k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0c20)
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd951, last bus=10
>PCI: Using MMCONFIG
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050211
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>request_module: runaway loop modprobe char-major-1-3
>request_module: runaway loop modprobe char-major-1-11
>request_module: runaway loop modprobe char-major-1-3
>request_module: runaway loop modprobe char-major-1-11
>request_module: runaway loop modprobe char-major-1-3
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 11) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 11) *10
>ACPI: Embedded Controller [EC] (gpe 29)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1147976981.832:0): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>NET: Registered protocol family 1
>PM: Checking swsusp image.
>PM: Resume from disk failed.
>ACPI wakeup devices: 
> LID SLPB PWRB CRD0 LANC AZAL 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>libata version 1.10 loaded.
>cloop: Initializing cloop v2.01
>cloop: loaded (max 8 devices)
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10
>ICH6: chipset revision 3
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>input: AT Translated Set 2 keyboard on isa0060/serio0
>hda: MATSHITADVD-RAM UJ-845S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>cloop: losetup_file: 142423 blocks, 16384 bytes/block, largest block is 16397 bytes.
>ISO 9660 Extensions: RRIP_1991A
>Synaptics Touchpad, model: 1
> Firmware: 5.9
> 180 degree mounted touchpad
> Sensor: 35
> new absolute packet format
> Touchpad has extended capability bits
> -> multifinger detection
> -> palm detection
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>hw_random hardware driver 1.0.0 loaded
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel 915G Chipset.
>agpgart: Maximum main memory to use for agp memory: 940M
>agpgart: AGP aperture is 256M @ 0x0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x1800
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x3000
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x3020
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: irq 11, io base 0x3040
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xb0004000
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>sata_promise version 1.01
>ACPI: PCI interrupt 0000:0a:02.0[A] -> GSI 11 (level, low) -> IRQ 11
>sata_promise PATA port found
>ata1: SATA max UDMA/133 cmd 0xF89FE200 ctl 0xF89FE238 bmdma 0x0 irq 11
>ata2: SATA max UDMA/133 cmd 0xF89FE280 ctl 0xF89FE2B8 bmdma 0x0 irq 11
>ata3: PATA max UDMA/133 cmd 0xF89FE300 ctl 0xF89FE338 bmdma 0x0 irq 11
>ieee1394: Initialized config rom entry `ip1394'
>ata1: no device found (phy stat 00000000)
>scsi0 : sata_promise
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_promise
>usb 5-4: new high speed USB device using ehci_hcd and address 3
>ata3: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3c48 87:4023 88:203f
>ata3: dev 0 ATA-6, max UDMA/100, 117210240 sectors: LBA48
>ata3: dev 1 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3c48 87:4023 88:203f
>ata3: dev 1 ATA-6, max UDMA/100, 117210240 sectors: LBA48
>ata3: dev 0 configured for UDMA/100
>ata3: dev 1 configured for UDMA/100
>scsi2 : sata_promise
>  Vendor: ATA       Model: HTS726060M9AT00   Rev: MH4O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  Vendor: ATA       Model: HTS726060M9AT00   Rev: MH4O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>PCI: Enabling device 0000:0a:00.0 (0000 -> 0002)
>ACPI: PCI interrupt 0000:0a:00.0[A] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:0a:00.0 [1558:0900]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0a:00.0, mfunc 0x00001002, devctl 0x64
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
>PCI: Enabling device 0000:0a:01.0 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI interrupt 0000:0a:01.0[A] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:0a:01.0 to 64
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[b3004000-b30047ff]  Max Packet=[2048]
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI interrupt 0000:0a:03.0[A] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:0a:03.0 to 64
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xf8aea800, 00:90:f5:3f:75:5f, IRQ 11
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090f5000040245f]
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
>SCSI device sdb: 117210240 512-byte hdwr sectors (60012 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 117210240 512-byte hdwr sectors (60012 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 sdb6 >
>Attached scsi disk sdb at scsi2, channel 0, id 1, lun 0
>Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi2, channel 0, id 1, lun 0,  type 0
>Capability LSM initialized
>st: Version 20041025, fixed bufsize 32768, s/g segs 256
>load_module: err 0xffffffef (dont worry)
>load_module: err 0xffffffef (dont worry)
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>load_module: err 0xffffffef (dont worry)
>ieee1394: raw1394: /dev/raw1394 device initialized
>usbcore: registered new driver hiddev
>video1394: Installed video1394 module
>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>Initializing USB Mass Storage driver...
>scsi3 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0x800-0x80f: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0xa00-0xaff: clean.
>  Vendor: GENERIC   Model: USB Storage-SMC   Rev: I16A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0
>Attached scsi generic sg2 at scsi3, channel 0, id 0, lun 0,  type 0
>  Vendor: GENERIC   Model: USB Storage-CFC   Rev: I16A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdd at scsi3, channel 0, id 0, lun 1
>Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 1,  type 0
>  Vendor: GENERIC   Model: USB Storage-SDC   Rev: I16A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sde at scsi3, channel 0, id 0, lun 2
>Attached scsi generic sg4 at scsi3, channel 0, id 0, lun 2,  type 0
>  Vendor: GENERIC   Model: USB Storage-MSC   Rev: I16A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdf at scsi3, channel 0, id 0, lun 3
>Attached scsi generic sg5 at scsi3, channel 0, id 0, lun 3,  type 0
>usb-storage: device scan complete
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c033d600(lo)
>IPv6 over IPv4 tunneling driver
>Disabled Privacy Extensions on device f7ca0000(sit0)
>usbcore: registered new driver snd-usb-audio
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
>usbcore: registered new driver usbserial_generic
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
>Non-volatile memory driver v1.2
>ACPI: AC Adapter [ADP0] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Processor [CPU0] (supports 8 throttling states)
>    ACPI-0484: *** Warning: Error getting cpuindex for acpiid 0x1
>ACPI: Thermal Zone [THM0] (71 C)
>powernow: This module only works with AMD K7 CPUs
>r8169: eth0: link up
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.

Actions: View

Attachments on bug 176249: 83772 | 83773 | 84155 | 84156 | 103107