Attachment 84235 Details for Bug 175702

boot.msg

boot.msg (text/plain), 33.29 KB, created by Antonis Stylianou on 2006-05-18 23:04:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Antonis Stylianou

Created: 2006-05-18 23:04:31 UTC

Size: 33.29 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.16.13-4-smp
>Loaded 22189 symbols from /boot/System.map-2.6.16.13-4-smp.
>Symbols match kernel version 2.6.16.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.16.13-4-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Wed May 3 04:53:23 UTC 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
><4> BIOS-e820: 000000003fe80000 - 000000003fe93000 (ACPI data)
><4> BIOS-e820: 000000003fe93000 - 000000003ff00000 (ACPI NVS)
><4> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
><4> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
><4> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
><5>126MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000f65e0
><7>On node 0 totalpages: 261760
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 32384 pages, LIFO batch:7
><6>DMI present.
><6>Using APIC driver default
><6>Intel MultiProcessor Specification v1.4
><6>    Virtual Wire compatibility mode.
><6>OEM ID: INTEL    Product ID: Napa ERB     APIC at: 0xFEE00000
><4>Processor #0 6:14 APIC version 20
><4>WARNING: maxcpus limit of 0 reached. Processor ignored.
><4>Processor #1 6:14 APIC version 20
><4>WARNING: maxcpus limit of 0 reached. Processor ignored.
><6>I/O APIC #2 Version 32 at 0xFEC00000.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><3>SMP mptable: no processors registered!
><3>BIOS bug, MP table errors detected!...
><3>... disabling SMP support. (tell your hw vendor)
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/sdb2 vga=normal ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3
><4>Found and enabled local APIC!
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 1995.302 MHz processor.
><6>Using tsc for high-res timesource
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1031028k/1047040k available (1612k kernel code, 15328k reserved, 730k data, 188k init, 129536k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 4000.10 BogoMIPS (lpj=8000208)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
><7>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
><4>monitor/mwait feature present.
><4>using mwait in idle threads.
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 2048K
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><7>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2327k freed
><4>CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
><5>SMP motherboard not detected.
><6>Brought up 1 CPUs
><4>migration_cost=0
><6>NET: Registered protocol family 16
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd873, last bus=9
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20060127
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><4>PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
><4>Please report the result to linux-kernel to fix this permanently
><6>PCI: Using IRQ router PIIX/ICH [8086/27b9] at 0000:00:1f.0
><6>PCI: Found IRQ 10 for device 0000:00:1f.1
><6>PCI: Sharing IRQ 10 with 0000:00:1d.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.2
><6>PCI: Sharing IRQ 10 with 0000:00:1f.3
><6>PCI: Sharing IRQ 10 with 0000:08:06.1
><3>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
><3>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
><3>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
><3>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
><3>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
><3>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
><3>PCI: Cannot allocate resource region 0 of device 0000:06:00.0
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><4>Setting up standard PCI resources
><3>PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: d0000000-d1ffffff
><6>  PREFETCH window: c0000000-cfffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.2
><6>  IO window: disabled.
><6>  MEM window: 52000000-520fffff
><6>  PREFETCH window: disabled.
><4>PCI: Bus 9, cardbus bridge: 0000:08:06.0
><4>  IO window: 00002400-000024ff
><4>  IO window: 00002800-000028ff
><4>  PREFETCH window: 50000000-51ffffff
><4>  MEM window: 54000000-55ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 2000-2fff
><6>  MEM window: d2000000-d20fffff
><6>  PREFETCH window: 50000000-51ffffff
><6>PCI: Found IRQ 11 for device 0000:00:01.0
><6>PCI: Sharing IRQ 11 with 0000:00:1c.1
><6>PCI: Sharing IRQ 11 with 0000:00:1d.3
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>PCI: Found IRQ 4 for device 0000:00:1c.0
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>PCI: Found IRQ 11 for device 0000:00:1c.1
><6>PCI: Sharing IRQ 11 with 0000:00:01.0
><6>PCI: Sharing IRQ 11 with 0000:00:1d.3
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>PCI: Enabling device 0000:00:1c.2 (0100 -> 0102)
><6>PCI: Found IRQ 3 for device 0000:00:1c.2
><6>PCI: Sharing IRQ 3 with 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:06:00.0
><6>PCI: Sharing IRQ 3 with 0000:08:06.0
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>PCI: Found IRQ 3 for device 0000:08:06.0
><6>PCI: Sharing IRQ 3 with 0000:00:1c.2
><6>PCI: Sharing IRQ 3 with 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:06:00.0
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1147978159.712:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><4>0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
><6>PCI: Found IRQ 11 for device 0000:00:01.0
><6>PCI: Sharing IRQ 11 with 0000:00:1c.1
><6>PCI: Sharing IRQ 11 with 0000:00:1d.3
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><6>PCI: Found IRQ 4 for device 0000:00:1c.0
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><6>PCI: Found IRQ 11 for device 0000:00:1c.1
><6>PCI: Sharing IRQ 11 with 0000:00:1d.3
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><6>PCI: Found IRQ 3 for device 0000:00:1c.2
><6>PCI: Sharing IRQ 3 with 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:06:00.0
><6>PCI: Sharing IRQ 3 with 0000:08:06.0
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.2:pcie00]
><7>Allocate Port Service[0000:00:1c.2:pcie02]
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>floppy0: no floppy controllers found
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 188k freed
><4>Write protecting the kernel read-only data: 287k
><6>Unknown option ''
><6>ide_setup: ide=nodma : Prevented DMA
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><4>Driver 'sd' needs updating - please use bus_type methods
><6>ICH7: IDE controller at PCI slot 0000:00:1f.1
><6>PCI: Found IRQ 10 for device 0000:00:1f.1
><6>PCI: Sharing IRQ 10 with 0000:00:1d.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.2
><6>PCI: Sharing IRQ 10 with 0000:00:1f.3
><6>PCI: Sharing IRQ 10 with 0000:08:06.1
><6>ICH7: chipset revision 1
><6>ICH7: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
><7>Probing IDE interface ide0...
><4>hda: HL-DT-ST DVDRAM GSA-4082N, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>libata version 1.20 loaded.
><7>ahci 0000:00:1f.2: version 1.2
><6>PCI: Found IRQ 10 for device 0000:00:1f.2
><6>PCI: Sharing IRQ 10 with 0000:00:1d.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.3
><6>PCI: Sharing IRQ 10 with 0000:08:06.1
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
><6>ata1: SATA max UDMA/133 cmd 0xF8812500 ctl 0x0 bmdma 0x0 irq 97
><6>ata2: SATA max UDMA/133 cmd 0xF8812580 ctl 0x0 bmdma 0x0 irq 97
><6>ata3: SATA max UDMA/133 cmd 0xF8812600 ctl 0x0 bmdma 0x0 irq 97
><6>ata4: SATA max UDMA/133 cmd 0xF8812680 ctl 0x0 bmdma 0x0 irq 97
><6>ata1: SATA link up 1.5 Gbps (SStatus 113)
><7>ata1: dev 0 cfg 00:045a 49:0f00 82:706b 83:7c09 84:6023 85:7069 86:3c09 87:6023 88:203f 93:0000
><6>ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
><7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
><6>ata1: dev 0 configured for UDMA/100
><7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
><6>scsi0 : ahci
><6>ata2: SATA link down (SStatus 0)
><6>scsi1 : ahci
><6>ata3: SATA link up 1.5 Gbps (SStatus 113)
><7>ata3: dev 0 cfg 00:045a 49:0f00 82:706b 83:7c09 84:6023 85:7069 86:3c09 87:6023 88:203f 93:0000
><6>ata3: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
><7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
><6>ata3: dev 0 configured for UDMA/100
><7>sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0x00000000
><6>scsi2 : ahci
><6>ata4: SATA link down (SStatus 0)
><6>scsi3 : ahci
><5>  Vendor: ATA       Model: HTS541080G9SA00   Rev: MB4O
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda: sda1 sda2 sda3
><5>sd 0:0:0:0: Attached scsi disk sda
><5>  Vendor: ATA       Model: HTS541080G9SA00   Rev: MB4O
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><6> sdb: sdb1 sdb2
><5>sd 2:0:0:0: Attached scsi disk sdb
><5>sd 2:0:0:0: Attached scsi generic sg1 type 0
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sdb2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>Adding 2104472k swap on /dev/sdb1.  Priority:-1 extents:1 across:2104472k
><6>PCI: Found IRQ 7 for device 0000:00:1b.0
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><4>ieee80211_crypt: module not supported by Novell, setting U taint flag.
><7>ieee80211_crypt: registered algorithm 'NULL'
><6>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
><6>e100: Copyright(c) 1999-2005 Intel Corporation
><4>ieee80211: module not supported by Novell, setting U taint flag.
><6>ieee80211: 802.11 data/management/control stack, git-1.1.7
><6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
><4>ipw3945: module not supported by Novell, setting U taint flag.
><6>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 0.0.73d
><6>ipw3945: Copyright(c) 2003-2006 Intel Corporation
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><7>ieee1394: Initialized config rom entry `ip1394'
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>USB Universal Host Controller Interface driver v2.3
><6>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
><6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
><6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
><6>Uniform CD-ROM driver Revision: 3.20
><6>PCI: Found IRQ 5 for device 0000:00:1d.0
><6>PCI: Sharing IRQ 5 with 0000:00:1d.7
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001800
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>PCI: Found IRQ 10 for device 0000:00:1d.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.3
><6>PCI: Sharing IRQ 10 with 0000:08:06.1
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>PCI: Found IRQ 3 for device 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:06:00.0
><6>PCI: Sharing IRQ 3 with 0000:08:06.0
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.2: irq 3, io base 0x00001840
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.2
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>PCI: Found IRQ 11 for device 0000:00:1d.3
><6>PCI: Sharing IRQ 11 with 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001860
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.16.13-4-smp uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.3
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>PCI: Found IRQ 3 for device 0000:06:00.0
><6>PCI: Sharing IRQ 3 with 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:08:06.0
><7>PCI: Setting latency timer of device 0000:06:00.0 to 64
><6>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
><6>agpgart: Detected an Intel 945GM Chipset.
><6>agpgart: AGP aperture is 256M @ 0x0
><6>usb 4-1: new full speed USB device using uhci_hcd and address 2
><3>ipw3945: ipw3945.ucode load failed: Reason -2
><3>ipw3945: Could not read microcode: -2
><4>ipw3945: probe of 0000:06:00.0 failed with error -2
><6>PCI: Found IRQ 3 for device 0000:06:00.0
><6>PCI: Sharing IRQ 3 with 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:08:06.0
><7>PCI: Setting latency timer of device 0000:06:00.0 to 64
><6>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
><3>ipw3945: ipw3945.ucode load failed: Reason -2
><3>ipw3945: Could not read microcode: -2
><4>ipw3945: probe of 0000:06:00.0 failed with error -2
><6>PCI: Found IRQ 10 for device 0000:08:06.1
><6>PCI: Sharing IRQ 10 with 0000:00:1d.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.1
><6>PCI: Sharing IRQ 10 with 0000:00:1f.3
><6>PCI: Found IRQ 5 for device 0000:00:1d.7
><6>PCI: Sharing IRQ 5 with 0000:00:1d.0
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
><6>ehci_hcd 0000:00:1d.7: irq 5, io mem 0xd2404000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb5: new device found, idVendor=0000, idProduct=0000
><6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: EHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.16.13-4-smp ehci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.7
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 8 ports detected
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d2007000-d20077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>PCI: Found IRQ 3 for device 0000:08:06.0
><6>PCI: Sharing IRQ 3 with 0000:00:1d.2
><6>PCI: Sharing IRQ 3 with 0000:06:00.0
><6>Yenta: CardBus bridge found at 0000:08:06.0 [103c:30a5]
><6>Yenta: ISA IRQ mask 0x0200, PCI irq 3
><6>Socket status: 30000006
><6>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
><6>cs: IO port probe 0x2000-0x2fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
><6>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
><6>PCI: Found IRQ 6 for device 0000:08:08.0
><7>PCI: Setting latency timer of device 0000:08:08.0 to 64
><6>e100: eth0: e100_probe: addr 0xd2006000, irq 6, MAC addr 00:0F:B0:FD:18:D2
><6>hw_random hardware driver 1.0.0 loaded
><3>usb 4-1: device not accepting address 2, error -71
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
><7>dm-netlink version 0.0.2 loaded
><6>usb 4-1: new full speed USB device using uhci_hcd and address 4
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[633f0200193c407e]
><6>usb 4-1: new device found, idVendor=03f0, idProduct=171d
><6>usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 4-1: Product: HP Integrated Module
><6>usb 4-1: Manufacturer: Broadcom Corp
><6>usb 4-1: configuration #1 chosen from 1 choice
><6>Bluetooth: Core ver 2.8
><6>NET: Registered protocol family 31
><6>Bluetooth: HCI device and connection manager initialized
><6>Bluetooth: HCI socket layer initialized
><6>Bluetooth: HCI USB driver ver 2.9
><6>usbcore: registered new driver hci_usb
><6>loop: loaded (max 8 devices)
><6>NTFS driver 2.1.26 [Flags: R/W MODULE].
><6>Bluetooth: L2CAP ver 2.8
><6>Bluetooth: L2CAP socket layer initialized
><6>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
><6>NTFS volume version 3.1.
><6>Bluetooth: RFCOMM socket layer initialized
><6>Bluetooth: RFCOMM TTY layer initialized
><6>Bluetooth: RFCOMM ver 1.7
><6>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
><5>audit(1147978186.009:2): AppArmor (version 2.0-19.43r6320) initialized
><4>
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu May 18 21:49:39 2006
>
>Configuring serial ports...
>Configured serial ports
>doneActivating swap-devices in /etc/fstab...
>doneStarting udevd udevd-event[1444]: run_program: exec of program '/lib/udev/ipw3945d.sh' failed
>
>done
>Loading required kernel modules
>doneActivating device mapper...
>done
>Starting MD Raid done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8)
>/dev/sda2 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
>doneLoading AppArmor module done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor profiles done
>Setting up the hardware clockdone
>Retry device configurationdone
>Setting up hostname 'antonisuse'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
><notice>killproc: kill(829,29)
>Creating /var/log/boot.msg
>donedone
>Starting Firewall Initialization (phase 1 of 2) Activating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(829,3)
>
>Boot logging started on /dev/tty1(/dev/console) at Thu May 18 18:49:50 2006
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 3
>Loading AppArmor profiles - AppArmor already loaded with profiles. Not loading profiles. warning
>acpid: no ACPI support in kernelskipped
><notice>
>INIT: Entering runlevel: 3
>
>
>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
>Initializing random number generatordone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting D-BUS daemondone
>Starting resource managerdone
>Starting irqbalance unused
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Starting the DHCP DBUS Daemon<notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
>done
>Starting the NetworkManager<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
>dhcdbd: dbus_svc_init failed: (null) (null)
>
>done
>Starting the NetworkManagerDispatcher<notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
>done
><notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
>mDNSResponder (Engineering Build) (Apr 23 2006 01:49:36) [2443]: starting
>
>Starting mdnsddone
>mDNSResponder: Unable to parse DNS server list. Unicast DNS-SD unavailable
>
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Starting ZENworks Management Daemondone
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Importing Net File System (NFS)unused
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/sbin/auditd ]
>Starting auditd done
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Checking/updating CPU microcode done
>Starting nfsboot (sm-notify) done
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
>Starting mail service (Postfix)done
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=3 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting powersaved: done
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
>Mount SMB/ CIFS File Systems unused
>Starting SMPPPDdone
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=normal RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N acpi=off LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/sdb2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Loading keymap i386/qwerty/us.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneStarting SSH daemondone
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>SuSEfirewall2: Warning: no interface active
>done
>Master Resource Control: runlevel 3 has been reached
>Skipped services in runlevel 3: acpid irq_balancer nfs smbfs splash
><notice>killproc: kill(2319,3)

Actions: View

Attachments on bug 175702: 83608 | 84234 | 84235 | 85167 | 85168 | 85451 | 86279 | 100885 | 100886 | 100887 | 100888