Attachment 872043 Details for Bug 1218948

before update..

dmeg before 20240120.txt (text/plain), 69.99 KB, created by Johan Dot on 2024-01-20 20:19:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Johan Dot

Created: 2024-01-20 20:19:59 UTC

Size: 69.99 KB

patch

obsolete

>  Driver: "r8169"
>  Driver Modules: "r8169"
>  Device File: eth8
>  HW Address: 00:1e:2a:cc:5d:26
>  Permanent HW Address: 00:1e:2a:cc:5d:26
>  Link detected: no
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (Ethernet controller)
>
>68: None 00.0: 10701 Ethernet
>  [Created at net.126]
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.uM+AX2qsXeC
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:14.4/0000:03:07.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "skge"
>  Driver Modules: "skge"
>  Device File: eth0
>  HW Address: 00:0c:46:46:6f:b0
>  Permanent HW Address: 00:0c:46:46:6f:b0
>  Link detected: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #36 (Ethernet controller)
>
>69: None 07.0: 10701 Ethernet
>  [Created at net.126]
>  Unique ID: JOwO.ndpeucax6V1
>  Parent ID: ADDn.8YN5_CVPV_0
>  SysFS ID: /class/net/eth7
>  SysFS Device Link: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "ax88179_178a"
>  Driver Modules: "ax88179_178a"
>  Device File: eth7
>  HW Address: a0:ce:c8:fc:e4:38
>  Permanent HW Address: a0:ce:c8:fc:e4:38
>  Link detected: no
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #57 (Ethernet controller)
>ghost:~ # ^C
>ghost:~ # dmesg
>[    0.000000] Linux version 5.14.21-150500.55.39-default (geeko@buildhost) (gcc (SUSE Linux) 7.5.0, GNU ld (GNU Binutils; SUSE Linux Enterprise 15) 2.41.0.20230908-150100.7.46) #1 SMP PREEMPT_DYNAMIC Tue Dec 5 10:06:35 UTC 2023 (2e4092e)
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.39-default root=UUID=4fdc1f47-d63f-4db9-ba0f-5f036df049a3 splash=silent quiet nomodeset mitigations=auto
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff8ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000cff90000-0x00000000cffa7fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000cffa8000-0x00000000cffcffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.5 present.
>[    0.000000] DMI: System manufacturer System Product Name/M4A78 PRO, BIOS 1701    08/16/2010
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2809.267 MHz processor
>[    0.005856] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.005860] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.014103] AGP: No AGP bridge found
>[    0.014181] last_pfn = 0x320000 max_arch_pfn = 0x400000000
>[    0.014286] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.014458] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
>[    0.014472] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
>[    0.018713] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
>[    0.018739] Using GB pages for direct mapping
>[    0.018941] RAMDISK: [mem 0x32563000-0x352a8fff]
>[    0.018949] ACPI: Early table checksum verification disabled
>[    0.018952] ACPI: RSDP 0x00000000000FB8B0 000024 (v02 ACPIAM)
>[    0.018958] ACPI: XSDT 0x00000000CFF90100 00005C (v01 081610 XSDT1259 20100816 MSFT 00000097)
>[    0.018965] ACPI: FACP 0x00000000CFF90290 0000F4 (v03 081610 FACP1259 20100816 MSFT 00000097)
>[    0.018972] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20220331/tbfadt-624)
>[    0.018977] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20220331/tbfadt-569)
>[    0.018982] ACPI: DSDT 0x00000000CFF90450 00DC0B (v01 A1150  A1150000 00000000 INTL 20060113)
>[    0.018986] ACPI: FACS 0x00000000CFFA8000 000040
>[    0.018990] ACPI: FACS 0x00000000CFFA8000 000040
>[    0.018993] ACPI: APIC 0x00000000CFF90390 00007C (v01 081610 APIC1259 20100816 MSFT 00000097)
>[    0.018997] ACPI: MCFG 0x00000000CFF90410 00003C (v01 081610 OEMMCFG  20100816 MSFT 00000097)
>[    0.019001] ACPI: OEMB 0x00000000CFFA8040 000072 (v01 081610 OEMB1259 20100816 MSFT 00000097)
>[    0.019005] ACPI: SRAT 0x00000000CFF9F450 0000E8 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
>[    0.019009] ACPI: HPET 0x00000000CFF9F540 000038 (v01 081610 OEMHPET  20100816 MSFT 00000097)
>[    0.019013] ACPI: SSDT 0x00000000CFF9F580 00088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
>[    0.019016] ACPI: Reserving FACP table memory at [mem 0xcff90290-0xcff90383]
>[    0.019018] ACPI: Reserving DSDT table memory at [mem 0xcff90450-0xcff9e05a]
>[    0.019020] ACPI: Reserving FACS table memory at [mem 0xcffa8000-0xcffa803f]
>[    0.019022] ACPI: Reserving FACS table memory at [mem 0xcffa8000-0xcffa803f]
>[    0.019023] ACPI: Reserving APIC table memory at [mem 0xcff90390-0xcff9040b]
>[    0.019024] ACPI: Reserving MCFG table memory at [mem 0xcff90410-0xcff9044b]
>[    0.019026] ACPI: Reserving OEMB table memory at [mem 0xcffa8040-0xcffa80b1]
>[    0.019027] ACPI: Reserving SRAT table memory at [mem 0xcff9f450-0xcff9f537]
>[    0.019029] ACPI: Reserving HPET table memory at [mem 0xcff9f540-0xcff9f577]
>[    0.019030] ACPI: Reserving SSDT table memory at [mem 0xcff9f580-0xcff9fe0b]
>[    0.019099] SRAT: PXM 0 -> APIC 0x00 -> Node 0
>[    0.019101] SRAT: PXM 0 -> APIC 0x01 -> Node 0
>[    0.019102] SRAT: PXM 0 -> APIC 0x02 -> Node 0
>[    0.019103] SRAT: PXM 0 -> APIC 0x03 -> Node 0
>[    0.019106] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
>[    0.019109] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
>[    0.019111] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x32fffffff]
>[    0.019113] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
>[    0.019116] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x31fffffff] -> [mem 0x00000000-0x31fffffff]
>[    0.019129] NODE_DATA(0) allocated [mem 0x31ffd3000-0x31fffdfff]
>[    0.019580] Zone ranges:
>[    0.019581]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.019583]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.019585]   Normal   [mem 0x0000000100000000-0x000000031fffffff]
>[    0.019587]   Device   empty
>[    0.019589] Movable zone start for each node
>[    0.019594] Early memory node ranges
>[    0.019595]   node   0: [mem 0x0000000000001000-0x000000000009efff]
>[    0.019596]   node   0: [mem 0x0000000000100000-0x00000000cff8ffff]
>[    0.019598]   node   0: [mem 0x0000000100000000-0x000000031fffffff]
>[    0.019601] Initmem setup node 0 [mem 0x0000000000001000-0x000000031fffffff]
>[    0.019609] On node 0, zone DMA: 1 pages in unavailable ranges
>[    0.019683] On node 0, zone DMA: 97 pages in unavailable ranges
>[    0.041912] On node 0, zone Normal: 112 pages in unavailable ranges
>[    0.042052] ACPI: PM-Timer IO Port: 0x808
>[    0.042072] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>[    0.042075] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.042078] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.042083] ACPI: Using ACPI (MADT) for SMP configuration information
>[    0.042085] ACPI: HPET id: 0x8300 base: 0xfed00000
>[    0.042090] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
>[    0.042108] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.042111] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.042113] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
>[    0.042114] PM: hibernation: Registered nosave memory: [mem 0x000e6000-0x000fffff]
>[    0.042116] PM: hibernation: Registered nosave memory: [mem 0xcff90000-0xcffa7fff]
>[    0.042118] PM: hibernation: Registered nosave memory: [mem 0xcffa8000-0xcffcffff]
>[    0.042119] PM: hibernation: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
>[    0.042120] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xffefffff]
>[    0.042122] PM: hibernation: Registered nosave memory: [mem 0xfff00000-0xffffffff]
>[    0.042124] [mem 0xd0000000-0xffefffff] available for PCI devices
>[    0.042125] Booting paravirtualized kernel on bare hardware
>[    0.042130] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.048186] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
>[    0.049467] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
>[    0.049478] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
>[    0.049481] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
>[    0.049525] Fallback order for Node 0: 0 
>[    0.049532] Built 1 zonelists, mobility grouping on.  Total pages: 3031697
>[    0.049535] Policy zone: Normal
>[    0.049537] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.39-default root=UUID=4fdc1f47-d63f-4db9-ba0f-5f036df049a3 splash=silent quiet nomodeset mitigations=auto
>[    0.049619] Booted with the nomodeset parameter. Only the system framebuffer will be available
>[    0.049638] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.39-default splash=silent", will be passed to user space.
>[    0.049640] printk: log_buf_len individual max cpu contribution: 32768 bytes
>[    0.049642] printk: log_buf_len total cpu_extra contributions: 163840 bytes
>[    0.049643] printk: log_buf_len min size: 262144 bytes
>[    0.051139] printk: log_buf_len: 524288 bytes
>[    0.051141] printk: early log buf free: 254320(97%)
>[    0.057331] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
>[    0.060430] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
>[    0.060504] mem auto-init: stack:off, heap alloc:off, heap free:off
>[    0.060506] AGP: Checking aperture...
>[    0.068743] AGP: No AGP bridge found
>[    0.068745] AGP: Node 0: aperture [bus addr 0xc8000000-0xc9ffffff] (32MB)
>[    0.068749] Aperture pointing to e820 RAM. Ignoring.
>[    0.068750] AGP: Your BIOS doesn't leave an aperture memory hole
>[    0.068751] AGP: Please enable the IOMMU option in the BIOS setup
>[    0.068752] AGP: This costs you 64MB of RAM
>[    0.068754] AGP: Mapping aperture over RAM [mem 0xc8000000-0xcbffffff] (65536KB)
>[    0.068758] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcbffffff]
>[    0.068843] software IO TLB: area num 8.
>[    0.135544] Memory: 3306464K/12319928K available (14336K kernel code, 3421K rwdata, 9368K rodata, 2868K init, 18132K bss, 453344K reserved, 0K cma-reserved)
>[    0.135553] random: get_random_u64 called from __kmem_cache_create+0x28/0x470 with crng_init=0
>[    0.135800] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
>[    0.135839] ftrace: allocating 43196 entries in 169 pages
>[    0.154978] ftrace: allocated 169 pages with 4 groups
>[    0.155518] Dynamic Preempt: none
>[    0.155571] rcu: Preemptible hierarchical RCU implementation.
>[    0.155572] rcu:     RCU event tracing is enabled.
>[    0.155573] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
>[    0.155575]  Trampoline variant of Tasks RCU enabled.
>[    0.155576]  Rude variant of Tasks RCU enabled.
>[    0.155576]  Tracing variant of Tasks RCU enabled.
>[    0.155578] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
>[    0.155579] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
>[    0.161135] NR_IRQS: 524544, nr_irqs: 472, preallocated irqs: 16
>[    0.161541] spurious 8259A interrupt: IRQ7.
>[    0.161559] Console: colour dummy device 80x25
>[    0.161578] printk: console [tty0] enabled
>[    0.161608] ACPI: Core revision 20220331
>[    0.161727] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
>[    0.161747] APIC: Switch to symmetric I/O mode setup
>[    0.162216] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.181748] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x287e7331246, max_idle_ns: 440795302241 ns
>[    0.181758] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.53 BogoMIPS (lpj=11237068)
>[    0.181782] LVT offset 0 assigned for vector 0xf9
>[    0.181787] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
>[    0.181789] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
>[    0.181793] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>[    0.181796] Spectre V2 : Mitigation: Retpolines
>[    0.181797] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>[    0.181798] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
>[    0.181803] x86/fpu: x87 FPU will use FXSAVE
>[    0.194653] Freeing SMP alternatives memory: 36K
>[    0.194663] pid_max: default: 32768 minimum: 301
>[    0.194717] LSM: Security Framework initializing
>[    0.194762] AppArmor: AppArmor initialized
>[    0.194866] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
>[    0.194932] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
>[    0.309724] smpboot: CPU0: AMD Athlon(tm) II X4 630 Processor (family: 0x10, model: 0x5, stepping: 0x2)
>[    0.309753] Performance Events: AMD PMU driver.
>[    0.309753] ... version:                0
>[    0.309753] ... bit width:              48
>[    0.309753] ... generic registers:      4
>[    0.309753] ... value mask:             0000ffffffffffff
>[    0.309753] ... max period:             00007fffffffffff
>[    0.309753] ... fixed-purpose events:   0
>[    0.309753] ... event mask:             000000000000000f
>[    0.309753] signal: max sigframe size: 1440
>[    0.309753] rcu: Hierarchical SRCU implementation.
>[    0.309753] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>[    0.309753] smp: Bringing up secondary CPUs ...
>[    0.309753] x86: Booting SMP configuration:
>[    0.309753] .... node  #0, CPUs:      #1 #2 #3
>[    0.313785] smp: Brought up 1 node, 4 CPUs
>[    0.313788] smpboot: Max logical packages: 2
>[    0.313790] smpboot: Total of 4 processors activated (22474.13 BogoMIPS)
>[    0.369566] node 0 deferred pages initialised in 52ms
>[    0.370423] devtmpfs: initialized
>[    0.370423] x86/mm: Memory block size: 128MB
>[    0.370956] ACPI: PM: Registering ACPI NVS region [mem 0xcffa8000-0xcffcffff] (163840 bytes)
>[    0.370956] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.370956] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
>[    0.370956] pinctrl core: initialized pinctrl subsystem
>[    0.370956] PM: RTC time: 12:54:52, date: 2024-01-20
>[    0.370956] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>[    0.371051] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
>[    0.371058] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
>[    0.371064] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
>[    0.371085] audit: initializing netlink subsys (disabled)
>[    0.371109] audit: type=2000 audit(1705755292.208:1): state=initialized audit_enabled=0 res=1
>[    0.371109] thermal_sys: Registered thermal governor 'fair_share'
>[    0.371109] thermal_sys: Registered thermal governor 'bang_bang'
>[    0.371109] thermal_sys: Registered thermal governor 'step_wise'
>[    0.371109] thermal_sys: Registered thermal governor 'user_space'
>[    0.371109] cpuidle: using governor ladder
>[    0.371109] cpuidle: using governor menu
>[    0.371109] node 0 link 0: io port [1000, ffffff]
>[    0.371109] TOM: 00000000d0000000 aka 3328M
>[    0.371109] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
>[    0.371109] node 0 link 0: mmio [a0000, bffff]
>[    0.371109] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
>[    0.371109] node 0 link 0: mmio [f0000000, fbbfffff]
>[    0.371109] node 0 link 0: mmio [fbc00000, fbdfffff]
>[    0.371109] node 0 link 0: mmio [fbe00000, ffefffff]
>[    0.371109] TOM2: 0000000330000000 aka 13056M
>[    0.371109] bus: [bus 00-07] on node 0 link 0
>[    0.371109] bus: 00 [io  0x0000-0xffff]
>[    0.371109] bus: 00 [mem 0x000a0000-0x000bffff]
>[    0.371109] bus: 00 [mem 0xd0000000-0xdfffffff]
>[    0.371109] bus: 00 [mem 0xf0000000-0xffffffff]
>[    0.371109] bus: 00 [mem 0x330000000-0xfcffffffff]
>[    0.371109] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.373778] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.373784] PCI: not using MMCONFIG
>[    0.373793] PCI: Using configuration type 1 for base access
>[    0.373794] PCI: Using configuration type 1 for extended access
>[    0.374133] mtrr: your CPUs had inconsistent fixed MTRR settings
>[    0.374135] mtrr: your CPUs had inconsistent variable MTRR settings
>[    0.374136] mtrr: probably your BIOS does not setup all CPUs.
>[    0.374136] mtrr: corrected configuration.
>[    0.375364] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
>[    0.375379] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.375379] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.484183] ACPI: Added _OSI(Module Device)
>[    0.484183] ACPI: Added _OSI(Processor Device)
>[    0.484183] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.484183] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.484183] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.484183] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[    0.484183] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
>[    0.493711] ACPI: 2 ACPI AML tables successfully acquired and loaded
>[    0.722529] ACPI: Interpreter enabled
>[    0.722560] ACPI: PM: (supports S0 S1 S3 S4 S5)
>[    0.722562] ACPI: Using IOAPIC for interrupt routing
>[    0.722601] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.722770] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.722797] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.722799] PCI: Using E820 reservations for host bridge windows
>[    0.723175] ACPI: Enabled 7 GPEs in block 00 to 1F
>[    0.730981] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.730994] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
>[    0.731099] acpi PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff window] (conflicts with Adapter ROM [mem 0x000cf000-0x000d07ff])
>[    0.731410] PCI host bridge to bus 0000:00
>[    0.731412] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.731414] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.731416] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.731418] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
>[    0.731420] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
>[    0.731423] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.731441] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
>[    0.731551] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
>[    0.731645] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
>[    0.731661] pci 0000:00:06.0: enabling Extended Tags
>[    0.731685] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>[    0.731781] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
>[    0.731798] pci 0000:00:11.0: reg 0x10: [io  0xb000-0xb007]
>[    0.731808] pci 0000:00:11.0: reg 0x14: [io  0xa000-0xa003]
>[    0.731817] pci 0000:00:11.0: reg 0x18: [io  0x9000-0x9007]
>[    0.731826] pci 0000:00:11.0: reg 0x1c: [io  0x8000-0x8003]
>[    0.731835] pci 0000:00:11.0: reg 0x20: [io  0x7000-0x700f]
>[    0.731844] pci 0000:00:11.0: reg 0x24: [mem 0xfbbffc00-0xfbbfffff]
>[    0.731866] pci 0000:00:11.0: set SATA to AHCI mode
>[    0.731965] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
>[    0.731981] pci 0000:00:12.0: reg 0x10: [mem 0xfbbfd000-0xfbbfdfff]
>[    0.732103] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
>[    0.732119] pci 0000:00:12.1: reg 0x10: [mem 0xfbbfe000-0xfbbfefff]
>[    0.732245] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
>[    0.732261] pci 0000:00:12.2: reg 0x10: [mem 0xfbbff800-0xfbbff8ff]
>[    0.732339] pci 0000:00:12.2: supports D1 D2
>[    0.732340] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>[    0.732422] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
>[    0.732438] pci 0000:00:13.0: reg 0x10: [mem 0xfbbfb000-0xfbbfbfff]
>[    0.732559] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
>[    0.732575] pci 0000:00:13.1: reg 0x10: [mem 0xfbbfc000-0xfbbfcfff]
>[    0.732700] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
>[    0.732716] pci 0000:00:13.2: reg 0x10: [mem 0xfbbff400-0xfbbff4ff]
>[    0.732793] pci 0000:00:13.2: supports D1 D2
>[    0.732795] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>[    0.732879] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
>[    0.733030] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
>[    0.733046] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
>[    0.733055] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
>[    0.733064] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
>[    0.733073] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
>[    0.733082] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
>[    0.733101] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>[    0.733103] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>[    0.733104] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>[    0.733106] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>[    0.733203] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
>[    0.733224] pci 0000:00:14.2: reg 0x10: [mem 0xfbbf4000-0xfbbf7fff 64bit]
>[    0.733289] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>[    0.733363] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
>[    0.733520] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
>[    0.733625] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
>[    0.733641] pci 0000:00:14.5: reg 0x10: [mem 0xfbbfa000-0xfbbfafff]
>[    0.733776] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
>[    0.733818] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
>[    0.733857] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
>[    0.733897] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
>[    0.733937] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
>[    0.733990] pci_bus 0000:01: extended config space not accessible
>[    0.734031] pci 0000:01:05.0: [1002:9610] type 00 class 0x030000
>[    0.734038] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
>[    0.734042] pci 0000:01:05.0: reg 0x14: [io  0xc000-0xc0ff]
>[    0.734046] pci 0000:01:05.0: reg 0x18: [mem 0xfbde0000-0xfbdeffff]
>[    0.734054] pci 0000:01:05.0: reg 0x24: [mem 0xfbc00000-0xfbcfffff]
>[    0.734065] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.734076] pci 0000:01:05.0: supports D1 D2
>[    0.734133] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
>[    0.734139] pci 0000:01:05.1: reg 0x10: [mem 0xfbdfc000-0xfbdfffff]
>[    0.734167] pci 0000:01:05.1: supports D1 D2
>[    0.734226] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.734230] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>[    0.734232] pci 0000:00:01.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
>[    0.734236] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.734297] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
>[    0.734319] pci 0000:02:00.0: reg 0x10: [mem 0xfbec0000-0xfbefffff 64bit]
>[    0.734329] pci 0000:02:00.0: reg 0x18: [io  0xdc00-0xdc7f]
>[    0.734377] pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
>[    0.734424] pci 0000:02:00.0: PME# supported from D3hot D3cold
>[    0.734520] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.734530] pci 0000:00:06.0: PCI bridge to [bus 02]
>[    0.734533] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
>[    0.734535] pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
>[    0.734548] pci_bus 0000:03: extended config space not accessible
>[    0.734580] pci 0000:03:06.0: [10ec:8169] type 00 class 0x020000
>[    0.734601] pci 0000:03:06.0: reg 0x10: [io  0xe800-0xe8ff]
>[    0.734613] pci 0000:03:06.0: reg 0x14: [mem 0xfbfffc00-0xfbfffcff]
>[    0.734664] pci 0000:03:06.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
>[    0.734702] pci 0000:03:06.0: supports D1 D2
>[    0.734703] pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
>[    0.734759] pci 0000:03:07.0: [1148:4320] type 00 class 0x020000
>[    0.734780] pci 0000:03:07.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff]
>[    0.734792] pci 0000:03:07.0: reg 0x14: [io  0xe400-0xe4ff]
>[    0.734844] pci 0000:03:07.0: reg 0x30: [mem 0xfbfa0000-0xfbfbffff pref]
>[    0.734888] pci 0000:03:07.0: supports D1 D2
>[    0.734890] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.734971] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
>[    0.734975] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
>[    0.734978] pci 0000:00:14.4:   bridge window [mem 0xfbf00000-0xfbffffff]
>[    0.734982] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
>[    0.734985] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
>[    0.734987] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
>[    0.734989] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
>[    0.734991] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
>[    0.736167] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
>[    0.736225] ACPI: PCI: Interrupt link LNKB configured for IRQ 4
>[    0.736280] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
>[    0.736334] ACPI: PCI: Interrupt link LNKD configured for IRQ 7
>[    0.736389] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
>[    0.736390] ACPI: PCI: Interrupt link LNKE disabled
>[    0.736443] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
>[    0.736497] ACPI: PCI: Interrupt link LNKG configured for IRQ 10
>[    0.736552] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
>[    0.736554] ACPI: PCI: Interrupt link LNKH disabled
>[    0.737816] iommu: Default domain type: Passthrough 
>[    0.737854] pps_core: LinuxPPS API ver. 1 registered
>[    0.737855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.737858] PTP clock support registered
>[    0.737874] EDAC MC: Ver: 3.0.0
>[    0.737954] NetLabel: Initializing
>[    0.737954] NetLabel:  domain hash size = 128
>[    0.737954] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.737954] NetLabel:  unlabeled traffic allowed by default
>[    0.737954] PCI: Using ACPI for IRQ routing
>[    0.745762] PCI: pci_cache_line_size set to 64 bytes
>[    0.745766] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.745769] e820: reserve RAM buffer [mem 0xcff90000-0xcfffffff]
>[    0.750318] pci 0000:01:05.0: vgaarb: setting as boot VGA device
>[    0.750318] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.750318] pci 0000:01:05.0: vgaarb: bridge control possible
>[    0.750318] vgaarb: loaded
>[    0.750318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.750318] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>[    0.753766] clocksource: Switched to clocksource tsc-early
>[    0.763717] VFS: Disk quotas dquot_6.6.0
>[    0.763740] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.763871] AppArmor: AppArmor Filesystem Enabled
>[    0.763897] pnp: PnP ACPI init
>[    0.764385] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.764392] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.764647] system 00:03: [io  0x04d0-0x04d1] has been reserved
>[    0.764650] system 00:03: [io  0x040b] has been reserved
>[    0.764652] system 00:03: [io  0x04d6] has been reserved
>[    0.764654] system 00:03: [io  0x0c00-0x0c01] has been reserved
>[    0.764655] system 00:03: [io  0x0c14] has been reserved
>[    0.764657] system 00:03: [io  0x0c50-0x0c51] has been reserved
>[    0.764659] system 00:03: [io  0x0c52] has been reserved
>[    0.764661] system 00:03: [io  0x0c6c] has been reserved
>[    0.764662] system 00:03: [io  0x0c6f] has been reserved
>[    0.764664] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
>[    0.764666] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
>[    0.764667] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
>[    0.764669] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
>[    0.764671] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
>[    0.764673] system 00:03: [io  0x0800-0x089f] has been reserved
>[    0.764674] system 00:03: [io  0x0b00-0x0b3f] has been reserved
>[    0.764676] system 00:03: [io  0x0b00-0x0b0f] has been reserved
>[    0.764678] system 00:03: [io  0x0b20-0x0b3f] has been reserved
>[    0.764680] system 00:03: [io  0x0900-0x090f] has been reserved
>[    0.764682] system 00:03: [io  0x0910-0x091f] has been reserved
>[    0.764684] system 00:03: [io  0xfe00-0xfefe] has been reserved
>[    0.764687] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
>[    0.764689] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
>[    0.765438] system 00:04: [io  0x0230-0x023f] has been reserved
>[    0.765441] system 00:04: [io  0x0290-0x029f] has been reserved
>[    0.765443] system 00:04: [io  0x0f40-0x0f4f] has been reserved
>[    0.765445] system 00:04: [io  0x0a30-0x0a3f] has been reserved
>[    0.765520] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.765841] pnp 00:06: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x000c0000-0x000dffff]
>[    0.765864] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.765866] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
>[    0.765868] system 00:06: [mem 0x00100000-0xcfffffff] could not be reserved
>[    0.765870] system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
>[    0.766015] pnp: PnP ACPI: found 7 devices
>[    0.772021] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.772110] NET: Registered PF_INET protocol family
>[    0.772723] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
>[    0.774582] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
>[    0.774640] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
>[    0.774969] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
>[    0.775302] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.775539] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
>[    0.775614] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
>[    0.775707] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
>[    0.775873] NET: Registered PF_UNIX/PF_LOCAL protocol family
>[    0.775882] NET: Registered PF_XDP protocol family
>[    0.775907] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.775912] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>[    0.775915] pci 0000:00:01.0:   bridge window [mem 0xfbc00000-0xfbdfffff]
>[    0.775918] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.775922] pci 0000:00:06.0: PCI bridge to [bus 02]
>[    0.775923] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
>[    0.775926] pci 0000:00:06.0:   bridge window [mem 0xfbe00000-0xfbefffff]
>[    0.775931] pci 0000:00:14.4: PCI bridge to [bus 03]
>[    0.775933] pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
>[    0.775938] pci 0000:00:14.4:   bridge window [mem 0xfbf00000-0xfbffffff]
>[    0.775948] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.775950] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.775952] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.775954] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff window]
>[    0.775956] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
>[    0.775958] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>[    0.775960] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbdfffff]
>[    0.775962] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.775964] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>[    0.775965] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
>[    0.775967] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
>[    0.775969] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
>[    0.775971] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
>[    0.775973] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
>[    0.775974] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.775976] pci_bus 0000:03: resource 7 [mem 0xd0000000-0xdfffffff window]
>[    0.775978] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window]
>[    0.776053] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
>[    0.830773] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x690 took 53422 usecs
>[    0.862767] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x690 took 31223 usecs
>[    0.894760] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x690 took 31039 usecs
>[    0.922772] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x690 took 27336 usecs
>[    0.950763] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x690 took 27116 usecs
>[    0.950835] pci 0000:01:05.1: D0 power state depends on 0000:01:05.0
>[    0.950851] PCI: CLS 64 bytes, default 64
>[    0.950950] Trying to unpack rootfs image as initramfs...
>[    0.961558] PCI-DMA: Disabling AGP.
>[    0.961674] PCI-DMA: aperture base @ c8000000 size 65536 KB
>[    0.961676] PCI-DMA: using GART IOMMU.
>[    0.961678] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>[    0.963498] ACPI: bus type thunderbolt registered
>[    0.963647] LVT offset 1 assigned for vector 0x400
>[    0.963656] LVT offset 1 assigned
>[    0.963917] perf: AMD IBS detected (0x0000001f)
>[    0.964465] Initialise system trusted keyrings
>[    0.964479] Key type blacklist registered
>[    0.964564] workingset: timestamp_bits=36 max_order=22 bucket_order=0
>[    0.966258] zbud: loaded
>[    0.966688] integrity: Platform Keyring initialized
>[    1.202441] Freeing initrd memory: 46360K
>[    1.917810] tsc: Refined TSC clocksource calibration: 2809.473 MHz
>[    1.917828] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x287f35c47de, max_idle_ns: 440795275350 ns
>[    1.917882] clocksource: Switched to clocksource tsc
>[    2.010188] Key type asymmetric registered
>[    2.010195] Asymmetric key parser 'x509' registered
>[    2.010261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
>[    2.010370] io scheduler mq-deadline registered
>[    2.010372] io scheduler kyber registered
>[    2.010403] io scheduler bfq registered
>[    2.010895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    2.011443] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    2.013214] Non-volatile memory driver v1.3
>[    2.013239] Linux agpgart interface v0.103
>[    2.013705] i8042: PNP: No PS/2 controller found.
>[    2.013706] i8042: Probing ports directly.
>[    2.014065] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.014070] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.014151] mousedev: PS/2 mouse device common for all mice
>[    2.014211] rtc_cmos 00:01: RTC can wake from S4
>[    2.014433] rtc_cmos 00:01: registered as rtc0
>[    2.014454] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    2.014480] amd_pstate: driver load is disabled, boot with specific mode to enable this
>[    2.014541] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.014571] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
>[    2.014573] vesafb: scrolling: redraw
>[    2.014574] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>[    2.014597] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
>[    2.014692] Console: switching to colour frame buffer device 160x64
>[    2.171281] fb0: VESA VGA frame buffer device
>[    2.171301] hid: raw HID events driver (C) Jiri Kosina
>[    2.171367] drop_monitor: Initializing network drop monitor service
>[    2.188560] NET: Registered PF_INET6 protocol family
>[    2.194209] Segment Routing with IPv6
>[    2.194214] RPL Segment Routing with IPv6
>[    2.194638] microcode: microcode updated early to new patch_level=0x010000db
>[    2.194671] microcode: CPU0: patch_level=0x010000db
>[    2.194683] microcode: CPU1: patch_level=0x010000db
>[    2.194692] microcode: CPU2: patch_level=0x010000db
>[    2.194699] microcode: CPU3: patch_level=0x010000db
>[    2.194706] microcode: Microcode Update Driver: v2.2.
>[    2.194712] IPI shorthand broadcast: enabled
>[    2.194726] sched_clock: Marking stable (2194308557, 275043)->(2199311065, -4727465)
>[    2.194871] registered taskstats version 1
>[    2.194945] Loading compiled-in X.509 certificates
>[    2.194988] Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: a746b64b6cb71f13385638055f46162bac632acd'
>[    2.195056] zswap: loaded using pool lzo/zbud
>[    2.195128] page_owner is disabled
>[    2.195199] Key type ._fscrypt registered
>[    2.195201] Key type .fscrypt registered
>[    2.195202] Key type fscrypt-provisioning registered
>[    2.200439] Key type encrypted registered
>[    2.200448] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.200467] ima: No TPM chip found, activating TPM-bypass!
>[    2.200473] Loading compiled-in module X.509 certificates
>[    2.200519] Loaded X.509 cert 'SUSE Linux Enterprise Secure Boot Signkey: a746b64b6cb71f13385638055f46162bac632acd'
>[    2.200522] ima: Allocated hash algorithm: sha256
>[    2.200535] ima: No architecture policies found
>[    2.200545] evm: Initialising EVM extended attributes:
>[    2.200546] evm: security.selinux
>[    2.200547] evm: security.SMACK64 (disabled)
>[    2.200548] evm: security.SMACK64EXEC (disabled)
>[    2.200549] evm: security.SMACK64TRANSMUTE (disabled)
>[    2.200550] evm: security.SMACK64MMAP (disabled)
>[    2.200551] evm: security.apparmor
>[    2.200552] evm: security.ima
>[    2.200553] evm: security.capability
>[    2.200554] evm: HMAC attrs: 0x1
>[    2.200832] PM:   Magic number: 8:634:936
>[    2.201085] RAS: Correctable Errors collector initialized.
>[    2.203078] Freeing unused decrypted memory: 2028K
>[    2.204019] Freeing unused kernel image (initmem) memory: 2868K
>[    2.225842] Write protecting the kernel read-only data: 24576k
>[    2.226204] Freeing unused kernel image (rodata/data gap) memory: 872K
>[    2.226217] Run /init as init process
>[    2.226218]   with arguments:
>[    2.226220]     /init
>[    2.226221]   with environment:
>[    2.226221]     HOME=/
>[    2.226222]     TERM=linux
>[    2.226223]     BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.55.39-default
>[    2.226224]     splash=silent
>[    2.240181] systemd[1]: systemd 249.16+suse.195.gb473c02cc0 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
>[    2.240325] systemd[1]: Detected architecture x86-64.
>[    2.240328] systemd[1]: Running in initial RAM disk.
>[    2.270165] systemd[1]: Hostname set to <ghost>.
>[    2.362362] systemd[1]: Queued start job for default target Initrd Default Target.
>[    2.369333] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.369357] systemd[1]: Reached target Initrd /usr File System.
>[    2.369429] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.369437] systemd[1]: Reached target Local File Systems.
>[    2.369462] random: systemd: uninitialized urandom read (16 bytes read)
>[    2.369470] systemd[1]: Reached target Slice Units.
>[    2.369494] systemd[1]: Reached target Swaps.
>[    2.369516] systemd[1]: Reached target Timer Units.
>[    2.369654] systemd[1]: Listening on Journal Socket (/dev/log).
>[    2.369787] systemd[1]: Listening on Journal Socket.
>[    2.369918] systemd[1]: Listening on udev Control Socket.
>[    2.370016] systemd[1]: Listening on udev Kernel Socket.
>[    2.370039] systemd[1]: Reached target Socket Units.
>[    2.371684] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
>[    2.373432] systemd[1]: Starting Create List of Static Device Nodes...
>[    2.375755] systemd[1]: Starting Journal Service...
>[    2.377537] systemd[1]: Starting Load Kernel Modules...
>[    2.379545] systemd[1]: Starting Setup Virtual Console...
>[    2.380766] systemd[1]: Finished Create List of Static Device Nodes.
>[    2.382508] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    2.399352] systemd[1]: Finished Create Static Device Nodes in /dev.
>[    2.419399] systemd[1]: Started Journal Service.
>[    2.456336] SCSI subsystem initialized
>[    2.458523] alua: device handler registered
>[    2.460116] emc: device handler registered
>[    2.461712] rdac: device handler registered
>[    2.473261] device-mapper: uevent: version 1.0.3
>[    2.473373] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
>[    2.650798] random: crng init done
>[    2.650806] random: 7 urandom warning(s) missed due to ratelimiting
>[    2.781773] raid6: sse2x4   gen()  8239 MB/s
>[    2.849772] raid6: sse2x4   xor()  2274 MB/s
>[    2.917770] raid6: sse2x2   gen()  7999 MB/s
>[    2.985764] raid6: sse2x2   xor()  6269 MB/s
>[    3.053771] raid6: sse2x1   gen()  6431 MB/s
>[    3.121765] raid6: sse2x1   xor()  4337 MB/s
>[    3.121769] raid6: using algorithm sse2x4 gen() 8239 MB/s
>[    3.121771] raid6: .... xor() 2274 MB/s, rmw enabled
>[    3.121773] raid6: using intx1 recovery algorithm
>[    3.123296] xor: measuring software checksum speed
>[    3.124017]    prefetch64-sse  : 13812 MB/sec
>[    3.124775]    generic_sse     : 13030 MB/sec
>[    3.124777] xor: using function: prefetch64-sse (13812 MB/sec)
>[    3.285815] Btrfs loaded, crc32c=crc32c-generic, assert=on, zoned=yes
>[    3.429206] libata version 3.00 loaded.
>[    3.440027] ahci 0000:00:11.0: version 3.0
>[    3.440367] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>[    3.440372] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>[    3.450257] ACPI: bus type USB registered
>[    3.450300] usbcore: registered new interface driver usbfs
>[    3.450310] usbcore: registered new interface driver hub
>[    3.450330] usbcore: registered new device driver usb
>[    3.455838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    3.457272] ehci-pci: EHCI PCI platform driver
>[    3.459460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    3.462063] QUIRK: Enable AMD PLL fix
>[    3.462105] ehci-pci 0000:00:12.2: EHCI Host Controller
>[    3.462116] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
>[    3.462124] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    3.462126] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
>[    3.462138] ehci-pci 0000:00:12.2: debug port 1
>[    3.462197] ehci-pci 0000:00:12.2: irq 17, io mem 0xfbbff800
>[    3.462526] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
>[    3.462641] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
>[    3.464164] sp5100-tco: probe of sp5100-tco failed with error -16
>[    3.464898] scsi host0: ahci
>[    3.481802] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
>[    3.481900] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
>[    3.481904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.481906] usb usb1: Product: EHCI Host Controller
>[    3.481908] usb usb1: Manufacturer: Linux 5.14.21-150500.55.39-default ehci_hcd
>[    3.481910] usb usb1: SerialNumber: 0000:00:12.2
>[    3.482075] hub 1-0:1.0: USB hub found
>[    3.482083] hub 1-0:1.0: 6 ports detected
>[    3.482613] ehci-pci 0000:00:13.2: EHCI Host Controller
>[    3.482623] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
>[    3.482629] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>[    3.482631] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
>[    3.482643] ehci-pci 0000:00:13.2: debug port 1
>[    3.482695] ehci-pci 0000:00:13.2: irq 19, io mem 0xfbbff400
>[    3.499715] scsi host1: ahci
>[    3.499836] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
>[    3.499887] scsi host2: pata_atiixp
>[    3.500049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
>[    3.500052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.500054] usb usb2: Product: EHCI Host Controller
>[    3.500056] usb usb2: Manufacturer: Linux 5.14.21-150500.55.39-default ehci_hcd
>[    3.500057] usb usb2: SerialNumber: 0000:00:13.2
>[    3.500196] hub 2-0:1.0: USB hub found
>[    3.500203] hub 2-0:1.0: 6 ports detected
>[    3.501878] ACPI: bus type drm_connector registered
>[    3.501989] ohci-pci: OHCI PCI platform driver
>[    3.502257] ohci-pci 0000:00:12.0: OHCI PCI host controller
>[    3.502269] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
>[    3.502334] ohci-pci 0000:00:12.0: irq 16, io mem 0xfbbfd000
>[    3.535288] scsi host3: ahci
>[    3.676182] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
>[    3.699446] scsi host4: pata_atiixp
>[    3.699519] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>[    3.699522] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>[    3.703637] scsi host5: ahci
>[    3.703711] ata1: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffd00 irq 22
>[    3.703714] ata2: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffd80 irq 22
>[    3.703717] ata3: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffe00 irq 22
>[    3.703720] ata4: SATA max UDMA/133 abar m1024@0xfbbffc00 port 0xfbbffe80 irq 22
>[    3.703788] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
>[    3.703791] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.703793] usb usb3: Product: OHCI PCI host controller
>[    3.703795] usb usb3: Manufacturer: Linux 5.14.21-150500.55.39-default ohci_hcd
>[    3.703796] usb usb3: SerialNumber: 0000:00:12.0
>[    3.703939] hub 3-0:1.0: USB hub found
>[    3.703950] hub 3-0:1.0: 3 ports detected
>[    3.710136] ohci-pci 0000:00:12.1: OHCI PCI host controller
>[    3.710154] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
>[    3.710199] ohci-pci 0000:00:12.1: irq 16, io mem 0xfbbfe000
>[    3.870719] ata6.00: ATA-8: WDC WD5000AAKX-22ERMA0, 17.01H17, max UDMA/133
>[    3.870729] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    3.873910] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-2 1H17 PQ: 0 ANSI: 5
>[    3.874234] scsi 4:0:0:0: Attached scsi generic sg0 type 0
>[    3.894488] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
>[    3.894495] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.894498] usb usb4: Product: OHCI PCI host controller
>[    3.894500] usb usb4: Manufacturer: Linux 5.14.21-150500.55.39-default ohci_hcd
>[    3.894501] usb usb4: SerialNumber: 0000:00:12.1
>[    3.894696] hub 4-0:1.0: USB hub found
>[    3.894706] hub 4-0:1.0: 3 ports detected
>[    3.895084] ohci-pci 0000:00:13.0: OHCI PCI host controller
>[    3.895091] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
>[    3.895144] ohci-pci 0000:00:13.0: irq 18, io mem 0xfbbfb000
>[    3.957817] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    3.961904] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
>[    3.961908] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.961910] usb usb5: Product: OHCI PCI host controller
>[    3.961912] usb usb5: Manufacturer: Linux 5.14.21-150500.55.39-default ohci_hcd
>[    3.961913] usb usb5: SerialNumber: 0000:00:13.0
>[    3.962080] hub 5-0:1.0: USB hub found
>[    3.962090] hub 5-0:1.0: 3 ports detected
>[    3.962511] ohci-pci 0000:00:13.1: OHCI PCI host controller
>[    3.962518] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
>[    3.962553] ohci-pci 0000:00:13.1: irq 18, io mem 0xfbbfc000
>[    4.024481] ata3: SATA link down (SStatus 0 SControl 300)
>[    4.029861] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
>[    4.029875] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.029877] usb usb6: Product: OHCI PCI host controller
>[    4.029879] usb usb6: Manufacturer: Linux 5.14.21-150500.55.39-default ohci_hcd
>[    4.029881] usb usb6: SerialNumber: 0000:00:13.1
>[    4.030141] hub 6-0:1.0: USB hub found
>[    4.030151] hub 6-0:1.0: 3 ports detected
>[    4.030732] ohci-pci 0000:00:14.5: OHCI PCI host controller
>[    4.030742] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
>[    4.030792] ohci-pci 0000:00:14.5: irq 18, io mem 0xfbbfa000
>[    4.093865] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
>[    4.093873] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.093876] usb usb7: Product: OHCI PCI host controller
>[    4.093877] usb usb7: Manufacturer: Linux 5.14.21-150500.55.39-default ohci_hcd
>[    4.093879] usb usb7: SerialNumber: 0000:00:14.5
>[    4.094035] hub 7-0:1.0: USB hub found
>[    4.094044] hub 7-0:1.0: 2 ports detected
>[    4.185835] ata4: softreset failed (device not ready)
>[    4.186890] ata4: applying PMP SRST workaround and retrying
>[    4.189816] ata2: softreset failed (device not ready)
>[    4.190872] ata2: applying PMP SRST workaround and retrying
>[    4.271677] usb 1-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
>[    4.271685] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.271687] usb 1-1: Product: AX88179A
>[    4.271689] usb 1-1: Manufacturer: ASIX
>[    4.271691] usb 1-1: SerialNumber: 00000000000001
>[    4.293821] ata1: softreset failed (device not ready)
>[    4.294874] ata1: applying PMP SRST workaround and retrying
>[    4.349832] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    4.349864] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    4.351039] ata4.00: ATA-8: WDC WD8000AARS-00Y5B1, 80.00A80, max UDMA/133
>[    4.351353] ata4.00: 1562824368 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    4.353564] ata4.00: configured for UDMA/133
>[    4.356591] ata2.00: HPA detected: current 234439535, native 234441648
>[    4.356601] ata2.00: ATA-8: KINGSTON SV300S37A120G, 608ABBF0, max UDMA/133
>[    4.387606] ata2.00: 234439535 sectors, multi 1: LBA48 NCQ (depth 32), AA
>[    4.394078] ata2.00: configured for UDMA/133
>[    4.453816] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    4.456726] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
>[    4.457028] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    4.460585] ata1.00: configured for UDMA/133
>[    4.460783] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5
>[    4.461190] scsi 0:0:0:0: Attached scsi generic sg1 type 0
>[    4.461395] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
>[    4.461696] scsi 1:0:0:0: Attached scsi generic sg2 type 0
>[    4.461927] scsi 5:0:0:0: Direct-Access     ATA      WDC WD8000AARS-0 0A80 PQ: 0 ANSI: 5
>[    4.462247] scsi 5:0:0:0: Attached scsi generic sg3 type 0
>[    4.483865] sd 0:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
>[    4.483883] sd 0:0:0:0: [sdb] Write Protect is off
>[    4.483885] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    4.483902] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.483924] sd 0:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
>[    4.484007] sd 5:0:0:0: [sdd] 1562824368 512-byte logical blocks: (800 GB/745 GiB)
>[    4.484028] sd 5:0:0:0: [sdd] Write Protect is off
>[    4.484031] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    4.484046] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.484069] sd 5:0:0:0: [sdd] Preferred minimum I/O size 512 bytes
>[    4.484159] sd 1:0:0:0: [sdc] 234439535 512-byte logical blocks: (120 GB/112 GiB)
>[    4.484168] sd 1:0:0:0: [sdc] Write Protect is off
>[    4.484170] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    4.484183] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.484202] sd 1:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
>[    4.484460] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    4.484486] sd 4:0:0:0: [sda] Write Protect is off
>[    4.484488] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.484504] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.484524] sd 4:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[    4.496859] sd 1:0:0:0: [sdc] Attached SCSI disk
>[    4.532623]  sdb: sdb1 sdb2 sdb3
>[    4.532877] sd 0:0:0:0: [sdb] Attached SCSI disk
>[    4.542513]  sda: sda1
>[    4.542690] sd 4:0:0:0: [sda] Attached SCSI disk
>[    4.677821] usb 3-2: new low-speed USB device number 2 using ohci-pci
>[    4.873873] usb 3-2: New USB device found, idVendor=0603, idProduct=00f2, bcdDevice= 1.12
>[    4.873882] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.873884] usb 3-2: Product: USB Keyboard
>[    4.873886] usb 3-2: Manufacturer: NOVATEK
>[    4.896122] usbcore: registered new interface driver usbhid
>[    4.896130] usbhid: USB HID core driver
>[    5.031501]  sdd: sdd1
>[    5.031694] sd 5:0:0:0: [sdd] Attached SCSI disk
>[    5.037593] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:0603:00F2.0001/input/input3
>[    5.094092] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:12.0-2/input0
>[    5.094322] input: NOVATEK USB Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:0603:00F2.0002/input/input4
>[    5.153975] input: NOVATEK USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:0603:00F2.0002/input/input5
>[    5.154035] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:0603:00F2.0002/input/input6
>[    5.154133] hid-generic 0003:0603:00F2.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:12.0-2/input1
>[    5.389832] usb 3-3: new low-speed USB device number 3 using ohci-pci
>[    5.622913] usb 3-3: New USB device found, idVendor=09da, idProduct=0006, bcdDevice= 0.01
>[    5.622921] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    5.622923] usb 3-3: Product: USB Wheel Mouse
>[    5.622925] usb 3-3: Manufacturer: A4Tech
>[    5.636707] input: A4Tech USB Wheel Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:09DA:0006.0003/input/input7
>[    5.636826] a4tech 0003:09DA:0006.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Wheel Mouse] on usb-0000:00:12.0-3/input0
>[    5.720994] BTRFS: device fsid 4fdc1f47-d63f-4db9-ba0f-5f036df049a3 devid 1 transid 1637398 /dev/sdb2 scanned by (udev-worker) (325)
>[    5.804428] BTRFS info (device sdb2): disk space caching is enabled
>[    5.804436] BTRFS info (device sdb2): has skinny extents
>[    7.041000] systemd-journald[175]: Received SIGTERM from PID 1 (systemd).
>[    8.649343] systemd[1]: systemd 249.16+suse.195.gb473c02cc0 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR -IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
>[    8.649479] systemd[1]: Detected architecture x86-64.
>[    8.965355] systemd-sysv-generator[475]: SysV service '/etc/init.d/ez-ipupdate' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[   10.821945] systemd[1]: /usr/lib/systemd/system/rpc-statd.service:14: PIDFile= references a path below legacy directory /var/run/, updating /var/run/rpc.statd.pid \xe2\x86\x92 /run/rpc.statd.pid; please update the unit file accordingly.
>[   11.026167] systemd[1]: initrd-switch-root.service: Deactivated successfully.
>[   11.026445] systemd[1]: Stopped Switch Root.
>[   11.027220] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
>[   11.027997] systemd[1]: Created slice Slice /system/getty.
>[   11.028871] systemd[1]: Created slice Slice /system/modprobe.
>[   11.029271] systemd[1]: Created slice User and Session Slice.
>[   11.029616] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[   11.029834] systemd[1]: Stopped target Switch Root.
>[   11.029888] systemd[1]: Stopped target Initrd File Systems.
>[   11.029925] systemd[1]: Stopped target Initrd Root File System.
>[   11.030047] systemd[1]: Reached target Slice Units.
>[   11.030109] systemd[1]: Reached target System Time Set.
>[   11.030213] systemd[1]: Reached target Local Verity Protected Volumes.
>[   11.030361] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[   11.046469] systemd[1]: Listening on LVM2 poll daemon socket.
>[   11.059008] systemd[1]: Listening on RPCbind Server Activation Socket.
>[   11.059182] systemd[1]: Reached target RPC Port Mapper.
>[   11.059349] systemd[1]: Listening on initctl Compatibility Named Pipe.
>[   11.083249] systemd[1]: Listening on udev Control Socket.
>[   11.083516] systemd[1]: Listening on udev Kernel Socket.
>[   11.084780] systemd[1]: Mounting Huge Pages File System...
>[   11.086367] systemd[1]: Mounting POSIX Message Queue File System...
>[   11.087885] systemd[1]: Mounting NFSD configuration filesystem...
>[   11.089454] systemd[1]: Mounting Kernel Debug File System...
>[   11.091005] systemd[1]: Mounting Kernel Trace File System...
>[   11.091432] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
>[   11.093510] systemd[1]: Starting Create List of Static Device Nodes...
>[   11.095652] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[   11.097812] systemd[1]: Starting Load Kernel Module configfs...
>[   11.099857] systemd[1]: Starting Load Kernel Module drm...
>[   11.102050] systemd[1]: Starting Load Kernel Module fuse...
>[   11.102368] systemd[1]: plymouth-start.service: Deactivated successfully.
>[   11.102472] systemd[1]: plymouth-start.service: Unit process 318 (plymouthd) remains running after unit stopped.
>[   11.102672] systemd[1]: Stopped Show Plymouth Boot Screen.
>[   11.102992] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
>[   11.103056] systemd[1]: Reached target Local Encrypted Volumes.
>[   11.103206] systemd[1]: plymouth-switch-root.service: Deactivated successfully.
>[   11.103350] systemd[1]: Stopped Plymouth switch root service.
>[   11.103607] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
>[   11.103713] systemd[1]: Stopped File System Check on Root Device.
>[   11.103879] systemd[1]: Stopped Journal Service.
>[   11.139279] systemd[1]: Listening on Syslog Socket.
>[   11.141652] systemd[1]: Starting Journal Service...
>[   11.143902] systemd[1]: Starting Load Kernel Modules...
>[   11.145951] systemd[1]: Starting Remount Root and Kernel File Systems...
>[   11.147928] systemd[1]: Starting Coldplug All udev Devices...
>[   11.150294] systemd[1]: Finished Create List of Static Device Nodes.
>[   11.150819] systemd[1]: modprobe@drm.service: Deactivated successfully.
>[   11.151085] systemd[1]: Finished Load Kernel Module drm.
>[   11.151778] systemd[1]: haveged.service: Scheduled restart job, restart counter is at 1.
>[   11.151811] systemd[1]: Stopped Entropy Daemon based on the HAVEGE algorithm.
>[   11.153676] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
>[   11.288970] systemd[1]: modprobe@configfs.service: Deactivated successfully.
>[   11.289302] systemd[1]: Finished Load Kernel Module configfs.
>[   11.290876] systemd[1]: Mounting Kernel Configuration File System...
>[   11.306601] systemd[1]: Mounted Huge Pages File System.
>[   11.306907] systemd[1]: Mounted POSIX Message Queue File System.
>[   11.307083] systemd[1]: Mounted Kernel Debug File System.
>[   11.307236] systemd[1]: Mounted Kernel Trace File System.
>[   11.307392] systemd[1]: Mounted Kernel Configuration File System.
>[   11.314675] fuse: init (API version 7.34)
>[   11.315646] systemd[1]: modprobe@fuse.service: Deactivated successfully.
>[   11.315988] systemd[1]: Finished Load Kernel Module fuse.
>[   11.317560] systemd[1]: Mounting FUSE Control File System...
>[   11.321446] systemd[1]: Mounted FUSE Control File System.
>[   11.330380] BTRFS info (device sdb2): disk space caching is enabled
>[   11.333001] systemd[1]: Finished Remount Root and Kernel File Systems.
>[   11.357260] systemd[1]: Condition check resulted in One time configuration for iscsi.service being skipped.
>[   11.357382] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
>[   11.390213] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
>[   11.390301] systemd[1]: Condition check resulted in Create System Users being skipped.
>[   11.391919] systemd[1]: Starting Create Static Device Nodes in /dev...
>[   11.392481] systemd[1]: Started Journal Service.
>[   11.468188] RPC: Registered named UNIX socket transport module.
>[   11.468194] RPC: Registered udp transport module.
>[   11.468195] RPC: Registered tcp transport module.
>[   11.468196] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   11.950063] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   12.676807] acpi_cpufreq: overriding BIOS provided _PSD data
>[   12.705538] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20220331/utaddress-213)
>[   12.705568] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20220331/utaddress-213)
>[   12.705583] ACPI: OSL: Resource conflict; ACPI support missing from driver?
>[   12.906540] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
>[   12.906675] ACPI: button: Power Button [PWRB]
>[   12.906731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
>[   12.921985] ACPI: button: Power Button [PWRF]
>[   13.231392] skge: 1.14 addr 0xfbff8000 irq 22 chip Yukon-Lite rev 7
>[   13.231720] skge 0000:03:07.0 eth0: addr 00:0c:46:46:6f:b0
>[   13.285458] input: PC Speaker as /devices/platform/pcspkr/input/input10
>[   13.830647] libphy: r8169: probed
>[   13.830892] r8169 0000:03:06.0 eth2: RTL8110s, 00:1e:2a:cc:5d:26, XID 040, IRQ 21
>[   13.830897] r8169 0000:03:06.0 eth2: jumbo features [frames: 7146 bytes, tx checksumming: ok]
>[   13.833818] r8169 0000:03:06.0 eth8: renamed from eth2
>[   13.976747] kvm: Nested Virtualization enabled
>[   13.976754] SVM: kvm: Nested Paging enabled
>[   14.177037] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11
>[   14.353209] MCE: In-kernel MCE decoding enabled.
>[   14.437840] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
>[   14.437851] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   14.437854] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
>[   14.437856] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
>[   14.437858] snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x21
>[   14.437859] snd_hda_codec_via hdaudioC0D0:    inputs:
>[   14.437861] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
>[   14.437863] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
>[   14.437864] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
>[   14.437866] snd_hda_codec_via hdaudioC0D0:      CD=0x1f
>[   14.461816] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
>[   14.461887] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
>[   14.461938] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
>[   14.461988] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
>[   14.462037] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
>[   14.462082] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
>[   14.462134] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
>[   14.462181] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
>[   14.974985] SGI XFS with ACLs, security attributes, quota, no debug enabled
>[   14.986786] XFS (sdd1): Mounting V5 Filesystem
>[   15.032125] XFS (sda1): Mounting V5 Filesystem
>[   15.059253] XFS (sdc): Mounting V5 Filesystem
>[   15.080029] ax88179_178a 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
>[   15.253446] XFS (sdc): Ending clean mount
>[   15.255079] xfs filesystem being mounted at /mnt/vm2 supports timestamps until 2038 (0x7fffffff)
>[   15.284271] XFS (sdd1): Ending clean mount
>[   15.284328] xfs filesystem being mounted at /mnt/vm supports timestamps until 2038 (0x7fffffff)
>[   15.380228] Adding 2103292k swap on /dev/sdb1.  Priority:-2 extents:1 across:2103292k FS
>[   15.391029] ax88179_178a 1-1:1.0 eth2: register 'ax88179_178a' at usb-0000:00:12.2-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, a0:ce:c8:fc:e4:38
>[   15.391142] usbcore: registered new interface driver ax88179_178a
>[   15.397242] ax88179_178a 1-1:1.0 eth7: renamed from eth2
>[   15.456478] XFS (sda1): Ending clean mount
>[   15.458558] xfs filesystem being mounted at /mnt/vol3 supports timestamps until 2038 (0x7fffffff)
>[   16.153214] audit: type=1400 audit(1705755307.984:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=871 comm="apparmor_parser"
>[   16.154973] audit: type=1400 audit(1705755307.988:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=872 comm="apparmor_parser"
>[   16.154997] audit: type=1400 audit(1705755307.988:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=872 comm="apparmor_parser"
>[   16.358609] audit: type=1400 audit(1705755308.192:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=870 comm="apparmor_parser"
>[   16.361570] audit: type=1400 audit(1705755308.192:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="php-fpm" pid=873 comm="apparmor_parser"
>[   16.367095] systemd-journald[492]: Received client request to flush runtime journal.
>[   16.415043] audit: type=1400 audit(1705755308.248:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-dcerpcd" pid=879 comm="apparmor_parser"
>[   16.444992] audit: type=1400 audit(1705755308.276:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=878 comm="apparmor_parser"
>[   16.517492] audit: type=1400 audit(1705755308.348:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd-classic" pid=881 comm="apparmor_parser"
>[   16.517585] audit: type=1400 audit(1705755308.348:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-rpcd" pid=880 comm="apparmor_parser"
>[   16.521544] audit: type=1400 audit(1705755308.352:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=883 comm="apparmor_parser"
>[   17.465101] XFS (sdb3): Mounting V5 Filesystem
>[   17.805082] XFS (sdb3): Ending clean mount
>[   17.805153] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
>[   19.713796] vboxdrv: loading out-of-tree module taints kernel.
>[   19.715209] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
>[   19.740639] vboxdrv: Found 4 processor cores/threads
>[   19.758257] vboxdrv: TSC mode is Invariant, tentative frequency 2809483979 Hz
>[   19.758272] vboxdrv: Successfully loaded version 7.0.12 r159484 (interface 0x00330004)
>[   20.035284] VBoxNetFlt: Successfully started.
>[   20.108794] VBoxNetAdp: Successfully started.
>[   25.324280] bpfilter: Loaded bpfilter_umh pid 1111
>[   25.324701] Started bpfilter
>[   26.168301] No iBFT detected.
>[   31.558473] skge 0000:03:07.0 eth0: enabling interface
>[   31.564197] ATL1E 0000:02:00.0 eth1: NIC Link is Up <1000 Mbps Full Duplex>
>[   31.619164] NET: Registered PF_PACKET protocol family
>[   34.274061] skge 0000:03:07.0 eth0: Link is up at 1000 Mbps, full duplex, flow control none
>[   58.247580] NFSD: Using UMH upcall client tracking operations.
>[   58.247593] NFSD: starting 90-second grace period (net f0000098)
>[   67.343396] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
>[  423.624752] SUPR0GipMap: fGetGipCpu=0xb
>[  423.914045] vboxdrv: ffffb49586b9d000 VMMR0.r0
>[  424.382989] vboxdrv: ffffb495884a4000 VBoxDDR0.r0
>[  424.480507] VBoxNetFlt: attached to 'eth0' / 00:0c:46:46:6f:b0
>[  424.481409] VBoxNetFlt: attached to 'eth1' / 90:e6:ba:ee:e7:6e
>[  424.492314] device eth0 entered promiscuous mode
>[  424.492561] device eth1 entered promiscuous mode
>[  907.860780] BTRFS warning (device sdb2): qgroup rescan init failed, qgroup is not enabled
>[ 2153.667893] systemd-sysv-generator[27081]: SysV service '/etc/init.d/ez-ipupdate' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[ 2159.417641] st: Version 20160209, fixed bufsize 32768, s/g segs 256
>[ 2187.704393] systemd-sysv-generator[27275]: SysV service '/etc/init.d/ez-ipupdate' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
>[17649.639374] lp: driver loaded but no devices found
>[17649.650648] ppdev: user-space parallel port driver
>[17649.900660] lp: driver loaded but no devices found

Actions: View

Attachments on bug 1218948: 872040 | 872041 | 872042 | 872043 | 872047 | 872060 | 872085 | 872086 | 872087 | 872088 | 872089 | 872399 | 872537 | 872538 | 872539 | 872540 | 872678 | 872679 | 872680 | 872681