Bugzilla – Attachment 873290 Details for
Bug 1220909
No game controllers detected
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
dmesg for kernel 6.7.4
dmesg6.7.4.txt (text/plain), 105.13 KB, created by
Ryan Stucki
on 2024-03-07 05:27:09 UTC
(
hide
)
Description:
dmesg for kernel 6.7.4
Filename:
MIME Type:
Creator:
Ryan Stucki
Created:
2024-03-07 05:27:09 UTC
Size:
105.13 KB
patch
obsolete
>[ 0.000000] Linux version 6.7.4-1-default (geeko@buildhost) (gcc (SUSE Linux) 13.2.1 20240125 [revision fc7d87e0ffadca49bec29b2107c1efd0da6b6ded], GNU ld (GNU Binutils; openSUSE Tumbleweed) 2.41.0.20230908-1) #1 SMP PREEMPT_DYNAMIC Tue Feb 6 05:32:37 UTC 2024 (01735a3) >[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7.4-1-default root=UUID=c56a0148-8cb4-4555-a664-a8d9a48a0821 splash=silent mitigations=auto quiet security=apparmor >[ 0.000000] BIOS-provided physical RAM map: >[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable >[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a0c1fff] usable >[ 0.000000] BIOS-e820: [mem 0x000000007a0c2000-0x000000007a90efff] reserved >[ 0.000000] BIOS-e820: [mem 0x000000007a90f000-0x000000007a91efff] ACPI data >[ 0.000000] BIOS-e820: [mem 0x000000007a91f000-0x000000007aef2fff] ACPI NVS >[ 0.000000] BIOS-e820: [mem 0x000000007aef3000-0x000000007b5a7fff] reserved >[ 0.000000] BIOS-e820: [mem 0x000000007b5a8000-0x000000007b5a8fff] usable >[ 0.000000] BIOS-e820: [mem 0x000000007b5a9000-0x000000007b62efff] reserved >[ 0.000000] BIOS-e820: [mem 0x000000007b62f000-0x000000007bffffff] usable >[ 0.000000] BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved >[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved >[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved >[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable >[ 0.000000] NX (Execute Disable) protection: active >[ 0.000000] APIC: Static calls initialized >[ 0.000000] e820: update [mem 0x7086e018-0x7088c457] usable ==> usable >[ 0.000000] e820: update [mem 0x7086e018-0x7088c457] usable ==> usable >[ 0.000000] e820: update [mem 0x7085f018-0x7086d057] usable ==> usable >[ 0.000000] e820: update [mem 0x7085f018-0x7086d057] usable ==> usable >[ 0.000000] extended physical RAM map: >[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable >[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000007085f017] usable >[ 0.000000] reserve setup_data: [mem 0x000000007085f018-0x000000007086d057] usable >[ 0.000000] reserve setup_data: [mem 0x000000007086d058-0x000000007086e017] usable >[ 0.000000] reserve setup_data: [mem 0x000000007086e018-0x000000007088c457] usable >[ 0.000000] reserve setup_data: [mem 0x000000007088c458-0x000000007a0c1fff] usable >[ 0.000000] reserve setup_data: [mem 0x000000007a0c2000-0x000000007a90efff] reserved >[ 0.000000] reserve setup_data: [mem 0x000000007a90f000-0x000000007a91efff] ACPI data >[ 0.000000] reserve setup_data: [mem 0x000000007a91f000-0x000000007aef2fff] ACPI NVS >[ 0.000000] reserve setup_data: [mem 0x000000007aef3000-0x000000007b5a7fff] reserved >[ 0.000000] reserve setup_data: [mem 0x000000007b5a8000-0x000000007b5a8fff] usable >[ 0.000000] reserve setup_data: [mem 0x000000007b5a9000-0x000000007b62efff] reserved >[ 0.000000] reserve setup_data: [mem 0x000000007b62f000-0x000000007bffffff] usable >[ 0.000000] reserve setup_data: [mem 0x000000007c000000-0x000000008fffffff] reserved >[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved >[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved >[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000087fffffff] usable >[ 0.000000] efi: EFI v2.4 by American Megatrends >[ 0.000000] efi: ESRT=0x7b54d318 ACPI=0x7ab41000 ACPI 2.0=0x7ab41000 SMBIOS=0xf05e0 SMBIOS 3.0=0x7b3ef000 MOKvar=0x765d0000 >[ 0.000000] efi: Remove mem31: MMIO range=[0x80000000-0x8fffffff] (256MB) from e820 map >[ 0.000000] e820: remove [mem 0x80000000-0x8fffffff] reserved >[ 0.000000] efi: Not removing mem32: MMIO range=[0xfed1c000-0xfed44fff] (164KB) from e820 map >[ 0.000000] efi: Remove mem33: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map >[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved >[ 0.000000] secureboot: Secure boot disabled >[ 0.000000] SMBIOS 3.0.0 present. >[ 0.000000] DMI: SZMZ X99-S3/X99-S3, BIOS 5.11 10/14/2021 >[ 0.000000] tsc: Fast TSC calibration using PIT >[ 0.000000] tsc: Detected 2200.038 MHz processor >[ 0.000651] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved >[ 0.000654] e820: remove [mem 0x000a0000-0x000fffff] usable >[ 0.000663] last_pfn = 0x880000 max_arch_pfn = 0x400000000 >[ 0.000669] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs >[ 0.000672] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT >[ 0.001178] last_pfn = 0x7c000 max_arch_pfn = 0x400000000 >[ 0.011180] found SMP MP-table at [mem 0x000fce50-0x000fce5f] >[ 0.011195] esrt: Reserving ESRT space from 0x000000007b54d318 to 0x000000007b54d350. >[ 0.011203] e820: update [mem 0x765d0000-0x765d0fff] usable ==> reserved >[ 0.011218] Using GB pages for direct mapping >[ 0.011736] secureboot: Secure boot disabled >[ 0.011737] RAMDISK: [mem 0x70894000-0x73ecafff] >[ 0.011743] ACPI: Early table checksum verification disabled >[ 0.011746] ACPI: RSDP 0x000000007AB41000 000024 (v02 ALASKA) >[ 0.011752] ACPI: XSDT 0x000000007AB41090 00009C (v01 ALASKA A M I 01072009 AMI 00010013) >[ 0.011759] ACPI: FACP 0x000000007AB73F80 00010C (v05 ALASKA A M I 01072009 AMI 00010013) >[ 0.011766] ACPI: DSDT 0x000000007AB411C0 032DBD (v02 ALASKA A M I 01072009 INTL 20091013) >[ 0.011771] ACPI: FACS 0x000000007AEF1F80 000040 >[ 0.011774] ACPI: APIC 0x000000007AB74090 0002C0 (v03 ALASKA A M I 01072009 AMI 00010013) >[ 0.011778] ACPI: FPDT 0x000000007AB74350 000044 (v01 ALASKA A M I 01072009 AMI 00010013) >[ 0.011782] ACPI: FIDT 0x000000007AB74398 00009C (v01 ALASKA A M I 01072009 AMI 00010013) >[ 0.011786] ACPI: MCFG 0x000000007AB74438 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) >[ 0.011790] ACPI: SSDT 0x000000007AB74478 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) >[ 0.011794] ACPI: UEFI 0x000000007AB747E8 000042 (v01 ALASKA A M I 01072009 00000000) >[ 0.011798] ACPI: HPET 0x000000007AB74830 000038 (v01 ALASKA A M I 00000001 INTL 20091013) >[ 0.011802] ACPI: MSCT 0x000000007AB74868 000090 (v01 ALASKA A M I 00000001 INTL 20091013) >[ 0.011806] ACPI: SLIT 0x000000007AB748F8 00002D (v01 ALASKA A M I 00000001 INTL 20091013) >[ 0.011810] ACPI: SRAT 0x000000007AB74928 001158 (v03 ALASKA A M I 00000001 INTL 20091013) >[ 0.011814] ACPI: WDDT 0x000000007AB75A80 000040 (v01 ALASKA A M I 00000000 INTL 20091013) >[ 0.011818] ACPI: SSDT 0x000000007AB75AC0 015159 (v02 ALASKA PmMgt 00000001 INTL 20120913) >[ 0.011822] ACPI: NITR 0x000000007AB8AC20 000071 (v02 ALASKA A M I 00000001 INTL 20091013) >[ 0.011826] ACPI: DMAR 0x000000007AB8AC98 0000DC (v01 ALASKA A M I 00000001 INTL 20091013) >[ 0.011829] ACPI: Reserving FACP table memory at [mem 0x7ab73f80-0x7ab7408b] >[ 0.011831] ACPI: Reserving DSDT table memory at [mem 0x7ab411c0-0x7ab73f7c] >[ 0.011832] ACPI: Reserving FACS table memory at [mem 0x7aef1f80-0x7aef1fbf] >[ 0.011833] ACPI: Reserving APIC table memory at [mem 0x7ab74090-0x7ab7434f] >[ 0.011834] ACPI: Reserving FPDT table memory at [mem 0x7ab74350-0x7ab74393] >[ 0.011835] ACPI: Reserving FIDT table memory at [mem 0x7ab74398-0x7ab74433] >[ 0.011836] ACPI: Reserving MCFG table memory at [mem 0x7ab74438-0x7ab74473] >[ 0.011837] ACPI: Reserving SSDT table memory at [mem 0x7ab74478-0x7ab747e4] >[ 0.011838] ACPI: Reserving UEFI table memory at [mem 0x7ab747e8-0x7ab74829] >[ 0.011839] ACPI: Reserving HPET table memory at [mem 0x7ab74830-0x7ab74867] >[ 0.011840] ACPI: Reserving MSCT table memory at [mem 0x7ab74868-0x7ab748f7] >[ 0.011841] ACPI: Reserving SLIT table memory at [mem 0x7ab748f8-0x7ab74924] >[ 0.011841] ACPI: Reserving SRAT table memory at [mem 0x7ab74928-0x7ab75a7f] >[ 0.011842] ACPI: Reserving WDDT table memory at [mem 0x7ab75a80-0x7ab75abf] >[ 0.011843] ACPI: Reserving SSDT table memory at [mem 0x7ab75ac0-0x7ab8ac18] >[ 0.011844] ACPI: Reserving NITR table memory at [mem 0x7ab8ac20-0x7ab8ac90] >[ 0.011845] ACPI: Reserving DMAR table memory at [mem 0x7ab8ac98-0x7ab8ad73] >[ 0.011878] SRAT: PXM 0 -> APIC 0x00 -> Node 0 >[ 0.011880] SRAT: PXM 0 -> APIC 0x02 -> Node 0 >[ 0.011881] SRAT: PXM 0 -> APIC 0x04 -> Node 0 >[ 0.011881] SRAT: PXM 0 -> APIC 0x06 -> Node 0 >[ 0.011882] SRAT: PXM 0 -> APIC 0x08 -> Node 0 >[ 0.011883] SRAT: PXM 0 -> APIC 0x0a -> Node 0 >[ 0.011884] SRAT: PXM 0 -> APIC 0x10 -> Node 0 >[ 0.011885] SRAT: PXM 0 -> APIC 0x12 -> Node 0 >[ 0.011886] SRAT: PXM 0 -> APIC 0x14 -> Node 0 >[ 0.011887] SRAT: PXM 0 -> APIC 0x16 -> Node 0 >[ 0.011888] SRAT: PXM 0 -> APIC 0x18 -> Node 0 >[ 0.011889] SRAT: PXM 0 -> APIC 0x20 -> Node 0 >[ 0.011889] SRAT: PXM 0 -> APIC 0x22 -> Node 0 >[ 0.011890] SRAT: PXM 0 -> APIC 0x24 -> Node 0 >[ 0.011891] SRAT: PXM 0 -> APIC 0x26 -> Node 0 >[ 0.011892] SRAT: PXM 0 -> APIC 0x28 -> Node 0 >[ 0.011893] SRAT: PXM 0 -> APIC 0x2a -> Node 0 >[ 0.011894] SRAT: PXM 0 -> APIC 0x30 -> Node 0 >[ 0.011895] SRAT: PXM 0 -> APIC 0x32 -> Node 0 >[ 0.011895] SRAT: PXM 0 -> APIC 0x34 -> Node 0 >[ 0.011896] SRAT: PXM 0 -> APIC 0x36 -> Node 0 >[ 0.011897] SRAT: PXM 0 -> APIC 0x38 -> Node 0 >[ 0.011898] SRAT: PXM 0 -> APIC 0x01 -> Node 0 >[ 0.011899] SRAT: PXM 0 -> APIC 0x03 -> Node 0 >[ 0.011900] SRAT: PXM 0 -> APIC 0x05 -> Node 0 >[ 0.011901] SRAT: PXM 0 -> APIC 0x07 -> Node 0 >[ 0.011901] SRAT: PXM 0 -> APIC 0x09 -> Node 0 >[ 0.011902] SRAT: PXM 0 -> APIC 0x0b -> Node 0 >[ 0.011903] SRAT: PXM 0 -> APIC 0x11 -> Node 0 >[ 0.011904] SRAT: PXM 0 -> APIC 0x13 -> Node 0 >[ 0.011905] SRAT: PXM 0 -> APIC 0x15 -> Node 0 >[ 0.011906] SRAT: PXM 0 -> APIC 0x17 -> Node 0 >[ 0.011907] SRAT: PXM 0 -> APIC 0x19 -> Node 0 >[ 0.011907] SRAT: PXM 0 -> APIC 0x21 -> Node 0 >[ 0.011908] SRAT: PXM 0 -> APIC 0x23 -> Node 0 >[ 0.011909] SRAT: PXM 0 -> APIC 0x25 -> Node 0 >[ 0.011910] SRAT: PXM 0 -> APIC 0x27 -> Node 0 >[ 0.011911] SRAT: PXM 0 -> APIC 0x29 -> Node 0 >[ 0.011912] SRAT: PXM 0 -> APIC 0x2b -> Node 0 >[ 0.011913] SRAT: PXM 0 -> APIC 0x31 -> Node 0 >[ 0.011913] SRAT: PXM 0 -> APIC 0x33 -> Node 0 >[ 0.011914] SRAT: PXM 0 -> APIC 0x35 -> Node 0 >[ 0.011915] SRAT: PXM 0 -> APIC 0x37 -> Node 0 >[ 0.011916] SRAT: PXM 0 -> APIC 0x39 -> Node 0 >[ 0.011926] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] >[ 0.011928] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff] >[ 0.011935] NUMA: Initialized distance table, cnt=1 >[ 0.011938] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff] >[ 0.011951] NODE_DATA(0) allocated [mem 0x87ffd4000-0x87fffefff] >[ 0.012237] Zone ranges: >[ 0.012238] DMA [mem 0x0000000000001000-0x0000000000ffffff] >[ 0.012241] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] >[ 0.012243] Normal [mem 0x0000000100000000-0x000000087fffffff] >[ 0.012244] Device empty >[ 0.012245] Movable zone start for each node >[ 0.012249] Early memory node ranges >[ 0.012250] node 0: [mem 0x0000000000001000-0x000000000009ffff] >[ 0.012252] node 0: [mem 0x0000000000100000-0x000000007a0c1fff] >[ 0.012253] node 0: [mem 0x000000007b5a8000-0x000000007b5a8fff] >[ 0.012254] node 0: [mem 0x000000007b62f000-0x000000007bffffff] >[ 0.012255] node 0: [mem 0x0000000100000000-0x000000087fffffff] >[ 0.012260] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] >[ 0.012265] On node 0, zone DMA: 1 pages in unavailable ranges >[ 0.012294] On node 0, zone DMA: 96 pages in unavailable ranges >[ 0.015809] On node 0, zone DMA32: 5350 pages in unavailable ranges >[ 0.015830] On node 0, zone DMA32: 134 pages in unavailable ranges >[ 0.016316] On node 0, zone Normal: 16384 pages in unavailable ranges >[ 0.016542] ACPI: PM-Timer IO Port: 0x408 >[ 0.016556] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >[ 0.016558] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) >[ 0.016559] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) >[ 0.016560] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) >[ 0.016561] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) >[ 0.016561] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) >[ 0.016562] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) >[ 0.016564] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) >[ 0.016564] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) >[ 0.016565] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) >[ 0.016566] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) >[ 0.016567] ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1]) >[ 0.016568] ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1]) >[ 0.016569] ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1]) >[ 0.016570] ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1]) >[ 0.016571] ACPI: LAPIC_NMI (acpi_id[0x28] high edge lint[0x1]) >[ 0.016572] ACPI: LAPIC_NMI (acpi_id[0x2a] high edge lint[0x1]) >[ 0.016572] ACPI: LAPIC_NMI (acpi_id[0x30] high edge lint[0x1]) >[ 0.016573] ACPI: LAPIC_NMI (acpi_id[0x32] high edge lint[0x1]) >[ 0.016574] ACPI: LAPIC_NMI (acpi_id[0x34] high edge lint[0x1]) >[ 0.016575] ACPI: LAPIC_NMI (acpi_id[0x36] high edge lint[0x1]) >[ 0.016576] ACPI: LAPIC_NMI (acpi_id[0x38] high edge lint[0x1]) >[ 0.016577] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >[ 0.016578] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) >[ 0.016579] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) >[ 0.016580] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) >[ 0.016581] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) >[ 0.016581] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) >[ 0.016582] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) >[ 0.016583] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) >[ 0.016584] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) >[ 0.016585] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) >[ 0.016586] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) >[ 0.016587] ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1]) >[ 0.016588] ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1]) >[ 0.016589] ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1]) >[ 0.016590] ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1]) >[ 0.016590] ACPI: LAPIC_NMI (acpi_id[0x29] high edge lint[0x1]) >[ 0.016591] ACPI: LAPIC_NMI (acpi_id[0x2b] high edge lint[0x1]) >[ 0.016592] ACPI: LAPIC_NMI (acpi_id[0x31] high edge lint[0x1]) >[ 0.016593] ACPI: LAPIC_NMI (acpi_id[0x33] high edge lint[0x1]) >[ 0.016594] ACPI: LAPIC_NMI (acpi_id[0x35] high edge lint[0x1]) >[ 0.016595] ACPI: LAPIC_NMI (acpi_id[0x37] high edge lint[0x1]) >[ 0.016596] ACPI: LAPIC_NMI (acpi_id[0x39] high edge lint[0x1]) >[ 0.016605] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 >[ 0.016611] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 >[ 0.016614] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >[ 0.016616] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >[ 0.016622] ACPI: Using ACPI (MADT) for SMP configuration information >[ 0.016623] ACPI: HPET id: 0x8086a701 base: 0xfed00000 >[ 0.016627] TSC deadline timer available >[ 0.016628] smpboot: Allowing 44 CPUs, 0 hotplug CPUs >[ 0.016642] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] >[ 0.016644] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] >[ 0.016646] PM: hibernation: Registered nosave memory: [mem 0x7085f000-0x7085ffff] >[ 0.016648] PM: hibernation: Registered nosave memory: [mem 0x7086d000-0x7086dfff] >[ 0.016649] PM: hibernation: Registered nosave memory: [mem 0x7086e000-0x7086efff] >[ 0.016650] PM: hibernation: Registered nosave memory: [mem 0x7088c000-0x7088cfff] >[ 0.016652] PM: hibernation: Registered nosave memory: [mem 0x765d0000-0x765d0fff] >[ 0.016654] PM: hibernation: Registered nosave memory: [mem 0x7a0c2000-0x7a90efff] >[ 0.016655] PM: hibernation: Registered nosave memory: [mem 0x7a90f000-0x7a91efff] >[ 0.016655] PM: hibernation: Registered nosave memory: [mem 0x7a91f000-0x7aef2fff] >[ 0.016656] PM: hibernation: Registered nosave memory: [mem 0x7aef3000-0x7b5a7fff] >[ 0.016658] PM: hibernation: Registered nosave memory: [mem 0x7b5a9000-0x7b62efff] >[ 0.016660] PM: hibernation: Registered nosave memory: [mem 0x7c000000-0x7fffffff] >[ 0.016661] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xfed1bfff] >[ 0.016661] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] >[ 0.016662] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff] >[ 0.016664] [mem 0x80000000-0xfed1bfff] available for PCI devices >[ 0.016666] Booting paravirtualized kernel on bare hardware >[ 0.016668] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns >[ 0.023278] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:44 nr_cpu_ids:44 nr_node_ids:1 >[ 0.027219] percpu: Embedded 70 pages/cpu s249856 r8192 d28672 u524288 >[ 0.027228] pcpu-alloc: s249856 r8192 d28672 u524288 alloc=1*2097152 >[ 0.027231] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 >[ 0.027238] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 >[ 0.027244] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 >[ 0.027251] pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31 >[ 0.027257] pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39 >[ 0.027264] pcpu-alloc: [0] 40 41 42 43 >[ 0.027288] Kernel command line: BOOT_IMAGE=/vmlinuz-6.7.4-1-default root=UUID=c56a0148-8cb4-4555-a664-a8d9a48a0821 splash=silent mitigations=auto quiet security=apparmor >[ 0.027390] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.7.4-1-default splash=silent", will be passed to user space. >[ 0.027412] random: crng init done >[ 0.027413] printk: log_buf_len individual max cpu contribution: 32768 bytes >[ 0.027415] printk: log_buf_len total cpu_extra contributions: 1409024 bytes >[ 0.027415] printk: log_buf_len min size: 262144 bytes >[ 0.029102] printk: log_buf_len: 2097152 bytes >[ 0.029103] printk: early log buf free: 244928(93%) >[ 0.033113] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) >[ 0.035125] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) >[ 0.036075] Fallback order for Node 0: 0 >[ 0.036083] Built 1 zonelists, mobility grouping on. Total pages: 8235753 >[ 0.036084] Policy zone: Normal >[ 0.036086] mem auto-init: stack:off, heap alloc:off, heap free:off >[ 0.036096] software IO TLB: area num 64. >[ 0.064510] Memory: 1914336K/33466572K available (16384K kernel code, 2958K rwdata, 12676K rodata, 4240K init, 4500K bss, 869296K reserved, 0K cma-reserved) >[ 0.064923] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=44, Nodes=1 >[ 0.064940] Kernel/User page tables isolation: enabled >[ 0.064998] ftrace: allocating 46665 entries in 183 pages >[ 0.074952] ftrace: allocated 183 pages with 6 groups >[ 0.075824] Dynamic Preempt: voluntary >[ 0.075998] rcu: Preemptible hierarchical RCU implementation. >[ 0.075999] rcu: RCU event tracing is enabled. >[ 0.076000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=44. >[ 0.076001] Trampoline variant of Tasks RCU enabled. >[ 0.076002] Rude variant of Tasks RCU enabled. >[ 0.076002] Tracing variant of Tasks RCU enabled. >[ 0.076003] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. >[ 0.076004] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=44 >[ 0.079270] NR_IRQS: 524544, nr_irqs: 1184, preallocated irqs: 16 >[ 0.079517] rcu: srcu_init: Setting srcu_struct sizes based on contention. >[ 0.079641] Console: colour dummy device 80x25 >[ 0.079644] printk: legacy console [tty0] enabled >[ 0.079733] ACPI: Core revision 20230628 >[ 0.079982] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns >[ 0.079994] APIC: Switch to symmetric I/O mode setup >[ 0.079995] DMAR: Host address width 46 >[ 0.079997] DMAR: DRHD base: 0x000000fbffd000 flags: 0x0 >[ 0.080005] DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap 8d2008c10ef0466 ecap f0205b >[ 0.080008] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 >[ 0.080013] DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df >[ 0.080015] DMAR: RMRR base: 0x0000007b404000 end: 0x0000007b414fff >[ 0.080017] DMAR: ATSR flags: 0x0 >[ 0.080018] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 >[ 0.080021] DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1 >[ 0.080023] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1 >[ 0.080024] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 >[ 0.080026] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. >[ 0.080027] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. >[ 0.080652] DMAR-IR: Enabled IRQ remapping in xapic mode >[ 0.080653] x2apic: IRQ remapping doesn't support X2APIC mode >[ 0.080662] APIC: Switched APIC routing to: physical flat >[ 0.081188] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >[ 0.096663] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb6569a3e9, max_idle_ns: 440795244253 ns >[ 0.096669] Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.41 BogoMIPS (lpj=7333460) >[ 0.096700] CPU0: Thermal monitoring enabled (TM1) >[ 0.096778] process: using mwait in idle threads >[ 0.096782] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 >[ 0.096784] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 >[ 0.096787] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization >[ 0.096790] Spectre V2 : Mitigation: Retpolines >[ 0.096791] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch >[ 0.096792] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT >[ 0.096792] Spectre V2 : Enabling Restricted Speculation for firmware calls >[ 0.096794] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier >[ 0.096795] Spectre V2 : User space: Mitigation: STIBP via prctl >[ 0.096797] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl >[ 0.096805] MDS: Mitigation: Clear CPU buffers >[ 0.096806] TAA: Mitigation: Clear CPU buffers >[ 0.096807] MMIO Stale Data: Mitigation: Clear CPU buffers >[ 0.096811] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' >[ 0.096813] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' >[ 0.096814] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' >[ 0.096815] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 >[ 0.096817] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. >[ 0.117049] Freeing SMP alternatives memory: 40K >[ 0.117052] pid_max: default: 45056 minimum: 352 >[ 0.120737] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,bpf,integrity >[ 0.120756] landlock: Up and running. >[ 0.120756] Yama: becoming mindful. >[ 0.120774] AppArmor: AppArmor initialized >[ 0.120778] LSM support for eBPF active >[ 0.120880] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) >[ 0.120929] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) >[ 0.121410] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz (family: 0x6, model: 0x4f, stepping: 0x1) >[ 0.121590] RCU Tasks: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1. >[ 0.121609] RCU Tasks Rude: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1. >[ 0.121629] RCU Tasks Trace: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1. >[ 0.121646] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. >[ 0.121670] ... version: 3 >[ 0.121671] ... bit width: 48 >[ 0.121672] ... generic registers: 4 >[ 0.121673] ... value mask: 0000ffffffffffff >[ 0.121674] ... max period: 00007fffffffffff >[ 0.121675] ... fixed-purpose events: 3 >[ 0.121676] ... event mask: 000000070000000f >[ 0.121810] signal: max sigframe size: 1776 >[ 0.121829] Estimated ratio of average max frequency by base frequency (times 1024): 1536 >[ 0.121879] rcu: Hierarchical SRCU implementation. >[ 0.121880] rcu: Max phase no-delay instances is 1000. >[ 0.123675] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. >[ 0.124062] smp: Bringing up secondary CPUs ... >[ 0.124167] smpboot: x86: Booting SMP configuration: >[ 0.124169] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 #42 #43 >[ 0.146708] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. >[ 0.146713] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. >[ 0.146714] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. >[ 0.150051] smp: Brought up 1 node, 44 CPUs >[ 0.150051] smpboot: Max logical packages: 1 >[ 0.150051] smpboot: Total of 44 processors activated (193680.15 BogoMIPS) >[ 0.170774] node 0 deferred pages initialised in 17ms >[ 0.170987] devtmpfs: initialized >[ 0.170987] x86/mm: Memory block size: 128MB >[ 0.175041] ACPI: PM: Registering ACPI NVS region [mem 0x7a91f000-0x7aef2fff] (6111232 bytes) >[ 0.175041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns >[ 0.175041] futex hash table entries: 16384 (order: 8, 1048576 bytes, linear) >[ 0.175041] pinctrl core: initialized pinctrl subsystem >[ 0.175041] PM: RTC time: 05:01:00, date: 2024-03-07 >[ 0.175041] NET: Registered PF_NETLINK/PF_ROUTE protocol family >[ 0.175041] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations >[ 0.175041] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations >[ 0.175041] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations >[ 0.175041] audit: initializing netlink subsys (disabled) >[ 0.175041] audit: type=2000 audit(1709787660.093:1): state=initialized audit_enabled=0 res=1 >[ 0.175041] thermal_sys: Registered thermal governor 'fair_share' >[ 0.175041] thermal_sys: Registered thermal governor 'bang_bang' >[ 0.175041] thermal_sys: Registered thermal governor 'step_wise' >[ 0.175041] thermal_sys: Registered thermal governor 'user_space' >[ 0.175041] cpuidle: using governor ladder >[ 0.175041] cpuidle: using governor menu >[ 0.176731] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it >[ 0.176734] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 >[ 0.176870] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) >[ 0.176876] PCI: not using MMCONFIG >[ 0.176877] PCI: Using configuration type 1 for base access >[ 0.178030] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' >[ 0.178032] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. >[ 0.178032] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages >[ 0.178032] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page >[ 0.178032] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages >[ 0.178032] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page >[ 0.178032] ACPI: Added _OSI(Module Device) >[ 0.178032] ACPI: Added _OSI(Processor Device) >[ 0.178032] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.178032] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.241103] ACPI: 3 ACPI AML tables successfully acquired and loaded >[ 0.245842] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored >[ 0.292332] ACPI: _OSC evaluated successfully for all CPUs >[ 0.292929] ACPI: Interpreter enabled >[ 0.292944] ACPI: PM: (supports S0 S4 S5) >[ 0.292946] ACPI: Using IOAPIC for interrupt routing >[ 0.296122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) >[ 0.303001] [Firmware Info]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources >[ 0.303004] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved as EfiMemoryMappedIO >[ 0.303005] MMCONFIG [mem 0x80000000-0x8fffffff] reserved to work around lack of ACPI motherboard _CRS >[ 0.303018] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug >[ 0.303019] PCI: Using E820 reservations for host bridge windows >[ 0.303971] ACPI: Enabled 4 GPEs in block 00 to 3F >[ 0.357709] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) >[ 0.357716] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] >[ 0.360303] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR DPC] >[ 0.361875] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] >[ 0.361877] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration >[ 0.361926] PCI host bridge to bus 0000:ff >[ 0.361928] pci_bus 0000:ff: root bus resource [bus ff] >[ 0.361944] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 >[ 0.362040] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 >[ 0.362123] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 >[ 0.362204] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 >[ 0.362285] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 >[ 0.362366] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 >[ 0.362444] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 >[ 0.362524] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 >[ 0.362604] pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000 >[ 0.362682] pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000 >[ 0.362761] pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000 >[ 0.362839] pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000 >[ 0.362918] pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000 >[ 0.362995] pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000 >[ 0.363074] pci 0000:ff:0d.2: [8086:6fea] type 00 class 0x088000 >[ 0.363155] pci 0000:ff:0d.3: [8086:6feb] type 00 class 0x088000 >[ 0.363234] pci 0000:ff:0d.4: [8086:6fec] type 00 class 0x088000 >[ 0.363314] pci 0000:ff:0d.5: [8086:6fed] type 00 class 0x088000 >[ 0.363397] pci 0000:ff:0d.6: [8086:6fee] type 00 class 0x088000 >[ 0.363475] pci 0000:ff:0d.7: [8086:6fef] type 00 class 0x088000 >[ 0.363554] pci 0000:ff:0e.0: [8086:6ff0] type 00 class 0x088000 >[ 0.363634] pci 0000:ff:0e.1: [8086:6ff1] type 00 class 0x088000 >[ 0.363712] pci 0000:ff:0e.2: [8086:6ff2] type 00 class 0xffffff >[ 0.363792] pci 0000:ff:0e.3: [8086:6ff3] type 00 class 0xffffff >[ 0.363870] pci 0000:ff:0e.4: [8086:6ff4] type 00 class 0xffffff >[ 0.363949] pci 0000:ff:0e.5: [8086:6ff5] type 00 class 0xffffff >[ 0.364030] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 >[ 0.364108] pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000 >[ 0.364187] pci 0000:ff:0f.2: [8086:6ffa] type 00 class 0x088000 >[ 0.364265] pci 0000:ff:0f.3: [8086:6ffb] type 00 class 0x088000 >[ 0.364344] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 >[ 0.364425] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 >[ 0.364504] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 >[ 0.364584] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 >[ 0.364663] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 >[ 0.364745] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 >[ 0.364824] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 >[ 0.364903] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 >[ 0.364982] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 >[ 0.365022] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 >[ 0.365105] pci 0000:ff:12.4: [8086:6f60] type 00 class 0x088000 >[ 0.365145] pci 0000:ff:12.5: [8086:6f38] type 00 class 0x110100 >[ 0.365239] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 >[ 0.365411] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 >[ 0.365511] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 >[ 0.365608] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 >[ 0.365704] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 >[ 0.365788] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 >[ 0.365871] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 >[ 0.365968] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 >[ 0.366067] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 >[ 0.366163] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 >[ 0.366258] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 >[ 0.366341] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 >[ 0.366422] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 >[ 0.366503] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 >[ 0.366595] pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000 >[ 0.366767] pci 0000:ff:16.1: [8086:6f79] type 00 class 0x088000 >[ 0.366867] pci 0000:ff:16.2: [8086:6f6a] type 00 class 0x088000 >[ 0.366966] pci 0000:ff:16.3: [8086:6f6b] type 00 class 0x088000 >[ 0.367068] pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000 >[ 0.367151] pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000 >[ 0.367241] pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000 >[ 0.367413] pci 0000:ff:17.1: [8086:6fd1] type 00 class 0x088000 >[ 0.367515] pci 0000:ff:17.2: [8086:6fd2] type 00 class 0x088000 >[ 0.367613] pci 0000:ff:17.3: [8086:6fd3] type 00 class 0x088000 >[ 0.367710] pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000 >[ 0.367793] pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000 >[ 0.367875] pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000 >[ 0.367958] pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000 >[ 0.368051] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 >[ 0.368132] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 >[ 0.368213] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 >[ 0.368294] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 >[ 0.368334] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 >[ 0.368421] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 >[ 0.368505] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 >[ 0.382406] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) >[ 0.382412] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] >[ 0.382744] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] >[ 0.383380] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] >[ 0.383381] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration >[ 0.384155] PCI host bridge to bus 0000:00 >[ 0.384158] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] >[ 0.384160] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] >[ 0.384162] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] >[ 0.384163] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] >[ 0.384165] pci_bus 0000:00: root bus resource [bus 00-fe] >[ 0.384195] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 >[ 0.384376] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 >[ 0.384465] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold >[ 0.384755] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 >[ 0.384846] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold >[ 0.384991] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 >[ 0.385080] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold >[ 0.385340] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 >[ 0.385466] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 >[ 0.385621] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 >[ 0.385737] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020 >[ 0.385757] pci 0000:00:05.4: reg 0x10: [mem 0xfbf1a000-0xfbf1afff] >[ 0.385913] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 >[ 0.385945] pci 0000:00:14.0: reg 0x10: [mem 0xfbf00000-0xfbf0ffff 64bit] >[ 0.386042] pci 0000:00:14.0: PME# supported from D3hot D3cold >[ 0.386203] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 >[ 0.386276] pci 0000:00:16.0: reg 0x10: [mem 0xfbf19000-0xfbf1900f 64bit] >[ 0.386549] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold >[ 0.386691] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 >[ 0.386719] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf18000-0xfbf183ff] >[ 0.386847] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold >[ 0.386945] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 >[ 0.386972] pci 0000:00:1b.0: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit] >[ 0.387054] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >[ 0.387151] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 >[ 0.387263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >[ 0.387364] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 >[ 0.387476] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold >[ 0.387574] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 >[ 0.387686] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >[ 0.387796] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 >[ 0.387916] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold >[ 0.388036] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 >[ 0.388064] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf17000-0xfbf173ff] >[ 0.388192] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold >[ 0.388295] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100 >[ 0.388550] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 >[ 0.388574] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] >[ 0.388589] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] >[ 0.388604] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] >[ 0.388619] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] >[ 0.388634] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] >[ 0.388649] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf16000-0xfbf167ff] >[ 0.388691] pci 0000:00:1f.2: PME# supported from D3hot >[ 0.388782] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 >[ 0.388808] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf15000-0xfbf150ff 64bit] >[ 0.388834] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] >[ 0.389130] pci 0000:00:01.0: PCI bridge to [bus 01] >[ 0.389336] pci 0000:00:01.1: PCI bridge to [bus 02] >[ 0.389561] pci 0000:03:00.0: [1002:1478] type 01 class 0x060400 >[ 0.389586] pci 0000:03:00.0: reg 0x10: [mem 0xfbb00000-0xfbb03fff] >[ 0.389632] pci 0000:03:00.0: enabling Extended Tags >[ 0.389713] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold >[ 0.389775] pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:03.0 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link) >[ 0.389879] pci 0000:00:03.0: PCI bridge to [bus 03-05] >[ 0.389882] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] >[ 0.389885] pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfbbfffff] >[ 0.389888] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.389936] pci 0000:04:00.0: [1002:1479] type 01 class 0x060400 >[ 0.390006] pci 0000:04:00.0: enabling Extended Tags >[ 0.390087] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold >[ 0.390216] pci 0000:03:00.0: PCI bridge to [bus 04-05] >[ 0.390221] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] >[ 0.390224] pci 0000:03:00.0: bridge window [mem 0xfb900000-0xfbafffff] >[ 0.390228] pci 0000:03:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.390272] pci 0000:05:00.0: [1002:73ff] type 00 class 0x030000 >[ 0.390304] pci 0000:05:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] >[ 0.390326] pci 0000:05:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] >[ 0.390342] pci 0000:05:00.0: reg 0x20: [io 0xe000-0xe0ff] >[ 0.390357] pci 0000:05:00.0: reg 0x24: [mem 0xfb900000-0xfb9fffff] >[ 0.390372] pci 0000:05:00.0: reg 0x30: [mem 0xfba00000-0xfba1ffff pref] >[ 0.390378] pci 0000:05:00.0: enabling Extended Tags >[ 0.390409] pci 0000:05:00.0: BAR 0: assigned to efifb >[ 0.390417] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] >[ 0.390465] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold >[ 0.390527] pci 0000:05:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:03.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) >[ 0.390603] pci 0000:05:00.1: [1002:ab28] type 00 class 0x040300 >[ 0.390627] pci 0000:05:00.1: reg 0x10: [mem 0xfba20000-0xfba23fff] >[ 0.390714] pci 0000:05:00.1: enabling Extended Tags >[ 0.390772] pci 0000:05:00.1: PME# supported from D1 D2 D3hot D3cold >[ 0.390873] pci 0000:04:00.0: PCI bridge to [bus 05] >[ 0.390877] pci 0000:04:00.0: bridge window [io 0xe000-0xefff] >[ 0.390880] pci 0000:04:00.0: bridge window [mem 0xfb900000-0xfbafffff] >[ 0.390885] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.390956] pci 0000:00:1c.0: PCI bridge to [bus 06] >[ 0.391026] pci 0000:07:00.0: [1106:3483] type 00 class 0x0c0330 >[ 0.391064] pci 0000:07:00.0: reg 0x10: [mem 0xfbe00000-0xfbe00fff 64bit] >[ 0.391201] pci 0000:07:00.0: PME# supported from D0 D3cold >[ 0.391288] pci 0000:00:1c.1: PCI bridge to [bus 07] >[ 0.391293] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] >[ 0.391366] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000 >[ 0.391399] pci 0000:08:00.0: reg 0x10: [io 0xd000-0xd0ff] >[ 0.391447] pci 0000:08:00.0: reg 0x18: [mem 0xfbd04000-0xfbd04fff 64bit] >[ 0.391476] pci 0000:08:00.0: reg 0x20: [mem 0xfbd00000-0xfbd03fff 64bit] >[ 0.391591] pci 0000:08:00.0: supports D1 D2 >[ 0.391593] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold >[ 0.391799] pci 0000:00:1c.2: PCI bridge to [bus 08] >[ 0.391803] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] >[ 0.391806] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] >[ 0.391901] pci 0000:09:00.0: [15b7:501a] type 00 class 0x010802 >[ 0.391941] pci 0000:09:00.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit] >[ 0.392004] pci 0000:09:00.0: reg 0x20: [mem 0xfbc04000-0xfbc040ff 64bit] >[ 0.392177] pci 0000:09:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) >[ 0.392266] pci 0000:00:1c.4: PCI bridge to [bus 09] >[ 0.392270] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] >[ 0.392340] pci_bus 0000:00: on NUMA node 0 >[ 0.393313] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 >[ 0.393382] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 >[ 0.393445] ACPI: PCI: Interrupt link LNKC configured for IRQ 3 >[ 0.393508] ACPI: PCI: Interrupt link LNKD configured for IRQ 5 >[ 0.393571] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 >[ 0.393572] ACPI: PCI: Interrupt link LNKE disabled >[ 0.393634] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 >[ 0.393636] ACPI: PCI: Interrupt link LNKF disabled >[ 0.393698] ACPI: PCI: Interrupt link LNKG configured for IRQ 7 >[ 0.393761] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 >[ 0.393762] ACPI: PCI: Interrupt link LNKH disabled >[ 0.393966] iommu: Default domain type: Passthrough >[ 0.393966] pps_core: LinuxPPS API ver. 1 registered >[ 0.393966] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> >[ 0.393966] PTP clock support registered >[ 0.393966] EDAC MC: Ver: 3.0.0 >[ 0.393966] efivars: Registered efivars operations >[ 0.393966] NetLabel: Initializing >[ 0.393966] NetLabel: domain hash size = 128 >[ 0.393966] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO >[ 0.393966] NetLabel: unlabeled traffic allowed by default >[ 0.393966] mctp: management component transport protocol core >[ 0.393966] NET: Registered PF_MCTP protocol family >[ 0.393966] PCI: Using ACPI for IRQ routing >[ 0.400242] PCI: pci_cache_line_size set to 64 bytes >[ 0.400389] e820: reserve RAM buffer [mem 0x7085f018-0x73ffffff] >[ 0.400392] e820: reserve RAM buffer [mem 0x7086e018-0x73ffffff] >[ 0.400393] e820: reserve RAM buffer [mem 0x765d0000-0x77ffffff] >[ 0.400394] e820: reserve RAM buffer [mem 0x7a0c2000-0x7bffffff] >[ 0.400396] e820: reserve RAM buffer [mem 0x7b5a9000-0x7bffffff] >[ 0.400443] pci 0000:05:00.0: vgaarb: setting as boot VGA device >[ 0.400443] pci 0000:05:00.0: vgaarb: bridge control possible >[ 0.400443] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none >[ 0.400443] vgaarb: loaded >[ 0.400443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 >[ 0.400443] hpet0: 8 comparators, 64-bit 14.318180 MHz counter >[ 0.402140] clocksource: Switched to clocksource tsc-early >[ 0.402305] VFS: Disk quotas dquot_6.6.0 >[ 0.402331] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >[ 0.402478] AppArmor: AppArmor Filesystem Enabled >[ 0.402510] pnp: PnP ACPI init >[ 0.402510] system 00:01: [io 0x0500-0x057f] has been reserved >[ 0.402510] system 00:01: [io 0x0400-0x047f] has been reserved >[ 0.402510] system 00:01: [io 0x0580-0x059f] has been reserved >[ 0.402510] system 00:01: [io 0x0600-0x061f] has been reserved >[ 0.402510] system 00:01: [io 0x0880-0x0883] has been reserved >[ 0.402510] system 00:01: [io 0x0800-0x081f] has been reserved >[ 0.402510] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved >[ 0.402510] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved >[ 0.402510] system 00:01: [mem 0xff000000-0xffffffff] has been reserved >[ 0.402510] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved >[ 0.402510] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved >[ 0.402510] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved >[ 0.402510] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved >[ 0.402510] system 00:02: [io 0x0a00-0x0a0f] has been reserved >[ 0.402510] system 00:02: [io 0x0a10-0x0a1f] has been reserved >[ 0.402510] system 00:02: [io 0x0a20-0x0a2f] has been reserved >[ 0.402510] system 00:02: [io 0x0a30-0x0a3f] has been reserved >[ 0.402510] pnp 00:05: [dma 0 disabled] >[ 0.402510] pnp: PnP ACPI: found 6 devices >[ 0.408003] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns >[ 0.408094] NET: Registered PF_INET protocol family >[ 0.408309] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) >[ 0.412116] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) >[ 0.412149] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) >[ 0.412157] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) >[ 0.412411] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) >[ 0.412778] TCP: Hash tables configured (established 262144 bind 65536) >[ 0.412988] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) >[ 0.413057] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) >[ 0.413127] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) >[ 0.413274] NET: Registered PF_UNIX/PF_LOCAL protocol family >[ 0.413281] NET: Registered PF_XDP protocol family >[ 0.413309] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 >[ 0.413313] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 >[ 0.413316] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 >[ 0.413324] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff] >[ 0.413328] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] >[ 0.413331] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] >[ 0.413333] pci 0000:00:01.0: PCI bridge to [bus 01] >[ 0.413358] pci 0000:00:01.1: PCI bridge to [bus 02] >[ 0.413383] pci 0000:04:00.0: PCI bridge to [bus 05] >[ 0.413389] pci 0000:04:00.0: bridge window [io 0xe000-0xefff] >[ 0.413399] pci 0000:04:00.0: bridge window [mem 0xfb900000-0xfbafffff] >[ 0.413407] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.413419] pci 0000:03:00.0: PCI bridge to [bus 04-05] >[ 0.413421] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] >[ 0.413431] pci 0000:03:00.0: bridge window [mem 0xfb900000-0xfbafffff] >[ 0.413438] pci 0000:03:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.413451] pci 0000:00:03.0: PCI bridge to [bus 03-05] >[ 0.413453] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] >[ 0.413462] pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfbbfffff] >[ 0.413468] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.413480] pci 0000:00:1c.0: PCI bridge to [bus 06] >[ 0.413482] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] >[ 0.413492] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff] >[ 0.413499] pci 0000:00:1c.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] >[ 0.413512] pci 0000:00:1c.1: PCI bridge to [bus 07] >[ 0.413521] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff] >[ 0.413540] pci 0000:00:1c.2: PCI bridge to [bus 08] >[ 0.413542] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] >[ 0.413552] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] >[ 0.413570] pci 0000:00:1c.4: PCI bridge to [bus 09] >[ 0.413580] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] >[ 0.413600] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] >[ 0.413602] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] >[ 0.413603] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] >[ 0.413605] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] >[ 0.413606] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] >[ 0.413608] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfbbfffff] >[ 0.413609] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.413611] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] >[ 0.413612] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfbafffff] >[ 0.413613] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.413615] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] >[ 0.413616] pci_bus 0000:05: resource 1 [mem 0xfb900000-0xfbafffff] >[ 0.413618] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] >[ 0.413619] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] >[ 0.413621] pci_bus 0000:06: resource 1 [mem 0x90000000-0x901fffff] >[ 0.413622] pci_bus 0000:06: resource 2 [mem 0x90200000-0x903fffff 64bit pref] >[ 0.413624] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff] >[ 0.413625] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] >[ 0.413626] pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff] >[ 0.413628] pci_bus 0000:09: resource 1 [mem 0xfbc00000-0xfbcfffff] >[ 0.413915] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] >[ 0.433935] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7b0 took 18858 usecs >[ 0.453926] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7b0 took 19488 usecs >[ 0.453955] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes >[ 0.454026] pci 0000:05:00.1: D0 power state depends on 0000:05:00.0 >[ 0.454288] DMAR: [Firmware Bug]: RMRR entry for device 07:00.0 is broken - applying workaround >[ 0.454293] Trying to unpack rootfs image as initramfs... >[ 0.454294] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >[ 0.454296] software IO TLB: mapped [mem 0x000000006c85f000-0x000000007085f000] (64MB) >[ 0.460603] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 655360 ms ovfl timer >[ 0.460605] RAPL PMU: hw unit of domain package 2^-14 Joules >[ 0.463044] Initialise system trusted keyrings >[ 0.463053] Key type blacklist registered >[ 0.463086] workingset: timestamp_bits=36 max_order=23 bucket_order=0 >[ 0.463094] zbud: loaded >[ 0.463329] integrity: Platform Keyring initialized >[ 0.463332] integrity: Machine keyring initialized >[ 0.479687] Key type asymmetric registered >[ 0.479689] Asymmetric key parser 'x509' registered >[ 0.641266] Freeing initrd memory: 55516K >[ 0.646946] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) >[ 0.646997] io scheduler mq-deadline registered >[ 0.646998] io scheduler kyber registered >[ 0.647013] io scheduler bfq registered >[ 0.649332] pcieport 0000:00:01.0: PME: Signaling with IRQ 25 >[ 0.649407] pcieport 0000:00:01.0: AER: enabled with IRQ 25 >[ 0.649727] pcieport 0000:00:01.1: PME: Signaling with IRQ 26 >[ 0.649793] pcieport 0000:00:01.1: AER: enabled with IRQ 26 >[ 0.650111] pcieport 0000:00:03.0: PME: Signaling with IRQ 28 >[ 0.650178] pcieport 0000:00:03.0: AER: enabled with IRQ 28 >[ 0.650410] pcieport 0000:00:1c.0: PME: Signaling with IRQ 29 >[ 0.650441] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ >[ 0.650669] pcieport 0000:00:1c.1: PME: Signaling with IRQ 30 >[ 0.650902] pcieport 0000:00:1c.2: PME: Signaling with IRQ 31 >[ 0.651117] pcieport 0000:00:1c.4: PME: Signaling with IRQ 32 >[ 0.651550] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >[ 0.651661] Monitor-Mwait will be used to enter C-1 state >[ 0.651668] ACPI: \_SB_.SCK0.CP00: Found 1 idle states >[ 0.658906] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled >[ 0.659081] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A >[ 0.660396] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A >[ 0.662684] Non-volatile memory driver v1.3 >[ 0.662687] Linux agpgart interface v0.103 >[ 0.662882] ACPI: bus type drm_connector registered >[ 0.666296] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 >[ 0.668547] serio: i8042 KBD port at 0x60,0x64 irq 1 >[ 0.668552] serio: i8042 AUX port at 0x60,0x64 irq 12 >[ 0.668676] mousedev: PS/2 mouse device common for all mice >[ 0.668734] rtc_cmos 00:00: RTC can wake from S4 >[ 0.668968] rtc_cmos 00:00: registered as rtc0 >[ 0.669009] rtc_cmos 00:00: setting system clock to 2024-03-07T05:01:01 UTC (1709787661) >[ 0.669038] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram >[ 0.669457] intel_pstate: Intel P-state driver initializing >[ 0.671485] ledtrig-cpu: registered to indicate activity on CPUs >[ 0.671748] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 >[ 0.676720] Console: switching to colour frame buffer device 240x67 >[ 0.679606] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device >[ 0.682041] hid: raw HID events driver (C) Jiri Kosina >[ 0.682176] drop_monitor: Initializing network drop monitor service >[ 0.694302] NET: Registered PF_INET6 protocol family >[ 0.701497] Segment Routing with IPv6 >[ 0.701498] RPL Segment Routing with IPv6 >[ 0.701504] In-situ OAM (IOAM) with IPv6 >[ 0.704517] microcode: Current revision: 0x0b000040 >[ 0.704519] microcode: Updated early from: 0x0b000021 >[ 0.705210] resctrl: L3 allocation detected >[ 0.705211] resctrl: L3 monitoring detected >[ 0.705251] IPI shorthand broadcast: enabled >[ 0.706491] sched_clock: Marking stable (704748798, 453404)->(1113829590, -408627388) >[ 0.706719] registered taskstats version 1 >[ 0.707366] Loading compiled-in X.509 certificates >[ 0.707404] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e' >[ 0.709385] page_owner is disabled >[ 0.709460] Key type .fscrypt registered >[ 0.709462] Key type fscrypt-provisioning registered >[ 0.731917] Key type encrypted registered >[ 0.731921] AppArmor: AppArmor sha1 policy hashing enabled >[ 0.732113] ima: No TPM chip found, activating TPM-bypass! >[ 0.732116] Loading compiled-in module X.509 certificates >[ 0.732141] Loaded X.509 cert 'openSUSE Secure Boot Signkey: fd9f2c12e599d67cc7f9067541adf426b712469e' >[ 0.732144] ima: Allocated hash algorithm: sha256 >[ 0.732154] ima: No architecture policies found >[ 0.732164] evm: Initialising EVM extended attributes: >[ 0.732164] evm: security.selinux >[ 0.732166] evm: security.SMACK64 (disabled) >[ 0.732167] evm: security.SMACK64EXEC (disabled) >[ 0.732167] evm: security.SMACK64TRANSMUTE (disabled) >[ 0.732168] evm: security.SMACK64MMAP (disabled) >[ 0.732169] evm: security.apparmor >[ 0.732170] evm: security.ima >[ 0.732171] evm: security.capability >[ 0.732171] evm: HMAC attrs: 0x1 >[ 0.871472] PM: Magic number: 0:994:10 >[ 0.871694] memory memory54: hash matches >[ 0.876765] RAS: Correctable Errors collector initialized. >[ 0.876939] clk: Disabling unused clocks >[ 0.878818] Freeing unused decrypted memory: 2028K >[ 0.879832] Freeing unused kernel image (initmem) memory: 4240K >[ 0.897148] Write protecting the kernel read-only data: 30720k >[ 0.898067] Freeing unused kernel image (rodata/data gap) memory: 1660K >[ 0.898124] Run /init as init process >[ 0.898126] with arguments: >[ 0.898128] /init >[ 0.898130] with environment: >[ 0.898132] HOME=/ >[ 0.898133] TERM=linux >[ 0.898135] BOOT_IMAGE=/vmlinuz-6.7.4-1-default >[ 0.898137] splash=silent >[ 0.938719] systemd[1]: systemd 254.9+suse.30.g31f1148f75 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified) >[ 0.938732] systemd[1]: Detected architecture x86-64. >[ 0.938738] systemd[1]: Running in initrd. >[ 0.939048] systemd[1]: Hostname set to <Odin>. >[ 1.377161] systemd[1]: bpf-lsm: LSM BPF program attached >[ 1.448758] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. >[ 1.463806] tsc: Refined TSC clocksource calibration: 2199.997 MHz >[ 1.463830] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb6300e510, max_idle_ns: 440795316804 ns >[ 1.463892] clocksource: Switched to clocksource tsc >[ 1.478668] systemd[1]: Queued start job for default target Initrd Default Target. >[ 1.528201] systemd[1]: Created slice Slice /system/systemd-cryptsetup. >[ 1.528283] systemd[1]: Expecting device /dev/disk/by-uuid/1b1796f3-d7c2-47a6-bf14-9da8e1dd71f1... >[ 1.528292] systemd[1]: Expecting device /dev/disk/by-uuid/DBDF-3DBE... >[ 1.528300] systemd[1]: Expecting device /dev/disk/by-uuid/c56a0148-8cb4-4555-a664-a8d9a48a0821... >[ 1.528314] systemd[1]: Expecting device /dev/disk/by-uuid/cb27a849-fbe5-4a87-8b69-b5c844061dbe... >[ 1.528322] systemd[1]: Expecting device /dev/disk/by-uuid/fffd8d8d-df9c-4322-8b38-0cafe32392a1... >[ 1.528353] systemd[1]: Reached target Initrd /usr File System. >[ 1.528389] systemd[1]: Reached target Slice Units. >[ 1.528406] systemd[1]: Reached target Swaps. >[ 1.528420] systemd[1]: Reached target Timer Units. >[ 1.528566] systemd[1]: Listening on Journal Socket (/dev/log). >[ 1.528717] systemd[1]: Listening on Journal Socket. >[ 1.528910] systemd[1]: Listening on Network Service Netlink Socket. >[ 1.529065] systemd[1]: Listening on udev Control Socket. >[ 1.529182] systemd[1]: Listening on udev Kernel Socket. >[ 1.529202] systemd[1]: Reached target Socket Units. >[ 1.530181] systemd[1]: Starting Create List of Static Device Nodes... >[ 1.531294] systemd[1]: Starting OpenSSH server daemon... >[ 1.531763] (sshd[517]: sshd.service: Referenced but unset environment variable evaluates to an empty string: CRYPTO_POLICY, OPTIONS >[ 1.532895] systemd[1]: Starting Journal Service... >[ 1.533987] systemd[1]: Starting Load Kernel Modules... >[ 1.534902] systemd[1]: Starting Generate network units from Kernel command line... >[ 1.535835] systemd[1]: Starting Virtual Console Setup... >[ 1.542492] systemd-journald[519]: Collecting audit messages is disabled. >[ 1.564041] systemd[1]: Finished Create List of Static Device Nodes. >[ 1.564429] systemd[1]: Started OpenSSH server daemon. >[ 1.593958] systemd[1]: Finished Load Kernel Modules. >[ 1.594121] systemd[1]: Started Journal Service. >[ 2.127002] device-mapper: uevent: version 1.0.3 >[ 2.127083] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com >[ 2.193788] raid6: avx2x4 gen() 26825 MB/s >[ 2.250456] raid6: avx2x2 gen() 27905 MB/s >[ 2.307122] raid6: avx2x1 gen() 21604 MB/s >[ 2.307123] raid6: using algorithm avx2x2 gen() 27905 MB/s >[ 2.363789] raid6: .... xor() 16255 MB/s, rmw enabled >[ 2.363790] raid6: using avx2x2 recovery algorithm >[ 2.364634] xor: automatically using best checksumming function avx >[ 2.532751] Btrfs loaded, assert=on, zoned=yes, fsverity=yes >[ 2.901448] cryptd: max_cpu_qlen set to 1000 >[ 2.915630] ACPI: bus type USB registered >[ 2.915661] usbcore: registered new interface driver usbfs >[ 2.915668] usbcore: registered new interface driver hub >[ 2.915691] usbcore: registered new device driver usb >[ 2.935537] AVX2 version of gcm_enc/dec engaged. >[ 2.935727] SCSI subsystem initialized >[ 2.938838] nvme nvme0: pci function 0000:09:00.0 >[ 2.938892] AES CTR mode by8 optimization enabled >[ 2.948189] nvme nvme0: allocated 32 MiB host memory buffer. >[ 2.949938] nvme nvme0: 16/0/0 default/read/poll queues >[ 2.954517] nvme0n1: p1 p2 p3 p4 >[ 3.002657] ehci-pci 0000:00:1a.0: EHCI Host Controller >[ 3.002668] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 >[ 3.002680] ehci-pci 0000:00:1a.0: debug port 2 >[ 3.006597] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf18000 >[ 3.020463] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >[ 3.020514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 >[ 3.020517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 3.020518] usb usb1: Product: EHCI Host Controller >[ 3.020519] usb usb1: Manufacturer: Linux 6.7.4-1-default ehci_hcd >[ 3.020520] usb usb1: SerialNumber: 0000:00:1a.0 >[ 3.020682] hub 1-0:1.0: USB hub found >[ 3.020692] hub 1-0:1.0: 2 ports detected >[ 3.021026] ehci-pci 0000:00:1d.0: EHCI Host Controller >[ 3.021034] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 >[ 3.021045] ehci-pci 0000:00:1d.0: debug port 2 >[ 3.024957] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf17000 >[ 3.037134] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >[ 3.037182] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 >[ 3.037185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 3.037188] usb usb2: Product: EHCI Host Controller >[ 3.037190] usb usb2: Manufacturer: Linux 6.7.4-1-default ehci_hcd >[ 3.037192] usb usb2: SerialNumber: 0000:00:1d.0 >[ 3.037359] hub 2-0:1.0: USB hub found >[ 3.037368] hub 2-0:1.0: 2 ports detected >[ 3.040003] alua: device handler registered >[ 3.042101] rdac: device handler registered >[ 3.042101] xhci_hcd 0000:00:14.0: xHCI Host Controller >[ 3.042110] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 >[ 3.043178] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 >[ 3.043234] emc: device handler registered >[ 3.043427] xhci_hcd 0000:00:14.0: xHCI Host Controller >[ 3.043431] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 >[ 3.043433] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed >[ 3.043466] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 >[ 3.043472] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 3.043474] usb usb3: Product: xHCI Host Controller >[ 3.043475] usb usb3: Manufacturer: Linux 6.7.4-1-default xhci-hcd >[ 3.043476] usb usb3: SerialNumber: 0000:00:14.0 >[ 3.043601] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control >[ 3.043717] hub 3-0:1.0: USB hub found >[ 3.043734] hub 3-0:1.0: 14 ports detected >[ 3.048157] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 >[ 3.048161] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 3.048163] usb usb4: Product: xHCI Host Controller >[ 3.048164] usb usb4: Manufacturer: Linux 6.7.4-1-default xhci-hcd >[ 3.048165] usb usb4: SerialNumber: 0000:00:14.0 >[ 3.048269] hub 4-0:1.0: USB hub found >[ 3.048282] hub 4-0:1.0: 6 ports detected >[ 3.050578] xhci_hcd 0000:07:00.0: xHCI Host Controller >[ 3.050584] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5 >[ 3.050669] xhci_hcd 0000:07:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 >[ 3.050872] xhci_hcd 0000:07:00.0: xHCI Host Controller >[ 3.050876] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 >[ 3.050878] xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed >[ 3.050905] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07 >[ 3.050907] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 3.050908] usb usb5: Product: xHCI Host Controller >[ 3.050910] usb usb5: Manufacturer: Linux 6.7.4-1-default xhci-hcd >[ 3.050910] usb usb5: SerialNumber: 0000:07:00.0 >[ 3.051001] hub 5-0:1.0: USB hub found >[ 3.051007] hub 5-0:1.0: 1 port detected >[ 3.051101] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07 >[ 3.051103] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >[ 3.051105] usb usb6: Product: xHCI Host Controller >[ 3.051106] usb usb6: Manufacturer: Linux 6.7.4-1-default xhci-hcd >[ 3.051107] usb usb6: SerialNumber: 0000:07:00.0 >[ 3.051219] hub 6-0:1.0: USB hub found >[ 3.051228] hub 6-0:1.0: 4 ports detected >[ 3.059876] r8169 0000:08:00.0 eth0: RTL8168h/8111h, 00:e6:bc:aa:1e:5b, XID 541, IRQ 55 >[ 3.059881] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] >[ 3.065567] r8169 0000:08:00.0 enp8s0: renamed from eth0 >[ 3.066453] libata version 3.00 loaded. >[ 3.070699] ahci 0000:00:1f.2: version 3.0 >[ 3.070893] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xc impl SATA mode >[ 3.070896] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst >[ 3.080899] scsi host0: ahci >[ 3.081027] scsi host1: ahci >[ 3.081127] scsi host2: ahci >[ 3.081232] scsi host3: ahci >[ 3.081330] scsi host4: ahci >[ 3.081429] scsi host5: ahci >[ 3.081473] ata1: DUMMY >[ 3.081474] ata2: DUMMY >[ 3.081475] ata3: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16200 irq 56 lpm-pol 0 >[ 3.081477] ata4: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16280 irq 56 lpm-pol 0 >[ 3.081478] ata5: DUMMY >[ 3.081478] ata6: DUMMY >[ 3.273794] usb 1-1: new high-speed USB device number 2 using ehci-pci >[ 3.287128] usb 2-1: new high-speed USB device number 2 using ehci-pci >[ 3.297130] usb 3-3: new high-speed USB device number 2 using xhci_hcd >[ 3.300461] usb 5-1: new high-speed USB device number 2 using xhci_hcd >[ 3.393251] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 3.393268] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >[ 3.393555] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1.SPT2._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330) >[ 3.393586] ACPI Error: Aborting method \_SB.PCI0.SAT1.SPT2._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529) >[ 3.393917] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1.SPT3._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330) >[ 3.394008] ACPI Error: Aborting method \_SB.PCI0.SAT1.SPT3._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529) >[ 3.394033] ata4.00: ATA-11: WDC WDS200T2B0B-00YS70, 415020WD, max UDMA/133 >[ 3.394477] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA >[ 3.395968] ata4.00: Features: Dev-Sleep >[ 3.396849] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1.SPT3._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330) >[ 3.396870] ACPI Error: Aborting method \_SB.PCI0.SAT1.SPT3._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529) >[ 3.399164] ata4.00: configured for UDMA/133 >[ 3.420107] ata3.00: ATA-9: ST2000DX002-2DV164, CC41, max UDMA/133 >[ 3.427516] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 >[ 3.427519] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >[ 3.427818] hub 1-1:1.0: USB hub found >[ 3.427888] hub 1-1:1.0: 6 ports detected >[ 3.429373] ata3.00: NCQ Send/Recv Log not supported >[ 3.429374] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA >[ 3.437515] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 >[ 3.437518] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >[ 3.437682] hub 2-1:1.0: USB hub found >[ 3.437763] hub 2-1:1.0: 8 ports detected >[ 3.441968] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT1.SPT2._GTF.DSSP], AE_NOT_FOUND (20230628/psargs-330) >[ 3.441992] ACPI Error: Aborting method \_SB.PCI0.SAT1.SPT2._GTF due to previous error (AE_NOT_FOUND) (20230628/psparse-529) >[ 3.448228] usb 5-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 >[ 3.448231] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 >[ 3.448233] usb 5-1: Product: USB2.0 Hub >[ 3.448980] hub 5-1:1.0: USB hub found >[ 3.449088] hub 5-1:1.0: 4 ports detected >[ 3.477778] ata3.00: NCQ Send/Recv Log not supported >[ 3.477782] ata3.00: configured for UDMA/133 >[ 3.477882] scsi 2:0:0:0: Direct-Access ATA ST2000DX002-2DV1 CC41 PQ: 0 ANSI: 5 >[ 3.478144] sd 2:0:0:0: Attached scsi generic sg0 type 0 >[ 3.478300] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) >[ 3.478307] sd 2:0:0:0: [sda] 4096-byte physical blocks >[ 3.478320] sd 2:0:0:0: [sda] Write Protect is off >[ 3.478323] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 >[ 3.478340] scsi 3:0:0:0: Direct-Access ATA WDC WDS200T2B0B 20WD PQ: 0 ANSI: 5 >[ 3.478341] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >[ 3.478364] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes >[ 3.478709] sd 3:0:0:0: Attached scsi generic sg1 type 0 >[ 3.478720] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) >[ 3.478733] sd 3:0:0:0: [sdb] Write Protect is off >[ 3.478737] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >[ 3.478752] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >[ 3.478773] sd 3:0:0:0: [sdb] Preferred minimum I/O size 512 bytes >[ 3.480533] sdb: sdb1 >[ 3.480611] sd 3:0:0:0: [sdb] Attached SCSI disk >[ 3.481869] sda: sda1 >[ 3.481939] sd 2:0:0:0: [sda] Attached SCSI disk >[ 3.571233] usb 6-3: new SuperSpeed USB device number 2 using xhci_hcd >[ 3.600908] usb 6-3: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21 >[ 3.600911] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 3.600913] usb 6-3: Product: 4-Port USB 3.0 Hub >[ 3.600914] usb 6-3: Manufacturer: Generic >[ 3.607851] hub 6-3:1.0: USB hub found >[ 3.609189] hub 6-3:1.0: 4 ports detected >[ 3.678562] usb 3-3: New USB device found, idVendor=0c50, idProduct=e916, bcdDevice= 1.00 >[ 3.678565] usb 3-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 >[ 3.678567] usb 3-3: Product: USB 2.0 Camera >[ 3.678569] usb 3-3: Manufacturer: Sonix Technology Co., Ltd. >[ 3.678570] usb 3-3: SerialNumber: SN0001 >[ 3.733796] usb 5-1.3: new high-speed USB device number 3 using xhci_hcd >[ 3.838271] usb 5-1.3: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21 >[ 3.838274] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 3.838276] usb 5-1.3: Product: 4-Port USB 2.0 Hub >[ 3.838277] usb 5-1.3: Manufacturer: Generic >[ 3.839417] hub 5-1.3:1.0: USB hub found >[ 3.840209] hub 5-1.3:1.0: 4 ports detected >[ 3.907503] usb 6-3.3: new SuperSpeed USB device number 3 using xhci_hcd >[ 3.952324] usb 6-3.3: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.13 >[ 3.952327] usb 6-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >[ 3.952329] usb 6-3.3: Product: USB3.0 Hub >[ 3.952330] usb 6-3.3: Manufacturer: VIA Labs, Inc. >[ 3.952331] usb 6-3.3: SerialNumber: 000000000 >[ 3.954605] hub 6-3.3:1.0: USB hub found >[ 3.954930] hub 6-3.3:1.0: 4 ports detected >[ 4.120461] usb 5-1.3.1: new full-speed USB device number 4 using xhci_hcd >[ 4.246358] usb 5-1.3.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 >[ 4.246362] usb 5-1.3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 >[ 4.246364] usb 5-1.3.1: Product: CSR8510 A10 >[ 4.337129] usb 5-1.3.3: new high-speed USB device number 5 using xhci_hcd >[ 4.428935] usb 5-1.3.3: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.13 >[ 4.428939] usb 5-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >[ 4.428941] usb 5-1.3.3: Product: USB2.0 Hub >[ 4.428942] usb 5-1.3.3: Manufacturer: VIA Labs, Inc. >[ 4.428943] usb 5-1.3.3: SerialNumber: 000000000 >[ 4.429907] hub 5-1.3.3:1.0: USB hub found >[ 4.430066] hub 5-1.3.3:1.0: 4 ports detected >[ 4.640460] usb 5-1.3.4: new full-speed USB device number 6 using xhci_hcd >[ 4.738487] usb 5-1.3.4: New USB device found, idVendor=28de, idProduct=1142, bcdDevice= 0.01 >[ 4.738490] usb 5-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 4.738492] usb 5-1.3.4: Product: Steam Controller >[ 4.738493] usb 5-1.3.4: Manufacturer: Valve Software >[ 5.130461] usb 5-1.3.3.1: new full-speed USB device number 7 using xhci_hcd >[ 5.277991] usb 5-1.3.3.1: New USB device found, idVendor=413c, idProduct=1003, bcdDevice= 2.00 >[ 5.277994] usb 5-1.3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 5.277996] usb 5-1.3.3.1: Product: Dell USB Keyboard Hub >[ 5.277997] usb 5-1.3.3.1: Manufacturer: Dell >[ 5.284505] hub 5-1.3.3.1:1.0: USB hub found >[ 5.285491] hub 5-1.3.3.1:1.0: 3 ports detected >[ 5.413791] usb 5-1.3.3.2: new full-speed USB device number 8 using xhci_hcd >[ 5.562118] usb 5-1.3.3.2: New USB device found, idVendor=062a, idProduct=4102, bcdDevice= 1.03 >[ 5.562122] usb 5-1.3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 >[ 5.562123] usb 5-1.3.3.2: Product: 2.4G Wireless Mouse >[ 5.562125] usb 5-1.3.3.2: Manufacturer: MOSART Semi. >[ 5.627132] usb 5-1.3.3.1.1: new full-speed USB device number 9 using xhci_hcd >[ 5.725369] usb 5-1.3.3.1.1: New USB device found, idVendor=413c, idProduct=2010, bcdDevice= 2.00 >[ 5.725373] usb 5-1.3.3.1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 >[ 5.725374] usb 5-1.3.3.1.1: Product: Dell USB Keyboard >[ 5.725375] usb 5-1.3.3.1.1: Manufacturer: Dell >[ 5.973541] [drm] amdgpu kernel modesetting enabled. >[ 5.973710] amdgpu: Virtual CRAT table created for CPU >[ 5.973723] amdgpu: Topology: Add CPU node >[ 5.974004] [drm] initializing kernel modesetting (DIMGREY_CAVEFISH 0x1002:0x73FF 0x1EAE:0x6505 0xC7). >[ 5.974019] [drm] register mmio base: 0xFB900000 >[ 5.974021] [drm] register mmio size: 1048576 >[ 5.977309] [drm] add ip block number 0 <nv_common> >[ 5.977311] [drm] add ip block number 1 <gmc_v10_0> >[ 5.977312] [drm] add ip block number 2 <navi10_ih> >[ 5.977313] [drm] add ip block number 3 <psp> >[ 5.977314] [drm] add ip block number 4 <smu> >[ 5.977316] [drm] add ip block number 5 <dm> >[ 5.977317] [drm] add ip block number 6 <gfx_v10_0> >[ 5.977318] [drm] add ip block number 7 <sdma_v5_2> >[ 5.977319] [drm] add ip block number 8 <vcn_v3_0> >[ 5.977320] [drm] add ip block number 9 <jpeg_v3_0> >[ 5.977340] amdgpu 0000:05:00.0: No more image in the PCI ROM >[ 5.977362] amdgpu 0000:05:00.0: amdgpu: Fetched VBIOS from ROM BAR >[ 5.977364] amdgpu: ATOM BIOS: 113-23L86HMD2-D02 >[ 5.992100] usbcore: registered new interface driver usbhid >[ 5.992103] usbhid: USB HID core driver >[ 5.995478] input: Valve Software Steam Controller Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.4/5-1.3.4:1.0/0003:28DE:1142.0001/input/input3 >[ 6.023797] Generic FE-GE Realtek PHY r8169-0-800:00: attached PHY driver (mii_bus:phy_addr=r8169-0-800:00, irq=MAC) >[ 6.039516] [drm] VCN(0) decode is enabled in VM mode >[ 6.039519] [drm] VCN(0) encode is enabled in VM mode >[ 6.053952] input: Valve Software Steam Controller Mouse as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.4/5-1.3.4:1.0/0003:28DE:1142.0001/input/input4 >[ 6.054025] hid-generic 0003:28DE:1142.0001: input,hidraw0: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input0 >[ 6.054167] hid-generic 0003:28DE:1142.0002: hiddev96,hidraw1: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input1 >[ 6.054299] hid-generic 0003:28DE:1142.0003: hiddev97,hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input2 >[ 6.054436] hid-generic 0003:28DE:1142.0004: hiddev98,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input3 >[ 6.054568] hid-generic 0003:28DE:1142.0005: hiddev99,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input4 >[ 6.054832] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.3/5-1.3.3.2/5-1.3.3.2:1.0/0003:062A:4102.0006/input/input5 >[ 6.054920] input: MOSART Semi. 2.4G Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.3/5-1.3.3.2/5-1.3.3.2:1.0/0003:062A:4102.0006/input/input6 >[ 6.071673] [drm] JPEG decode is enabled in VM mode >[ 6.087330] Console: switching to colour dummy device 80x25 >[ 6.110555] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.3/5-1.3.3.2/5-1.3.3.2:1.0/0003:062A:4102.0006/input/input7 >[ 6.110681] hid-generic 0003:062A:4102.0006: input,hiddev100,hidraw5: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:07:00.0-1.3.3.2/input0 >[ 6.110979] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.3/5-1.3.3.1/5-1.3.3.1.1/5-1.3.3.1.1:1.0/0003:413C:2010.0007/input/input8 >[ 6.127858] amdgpu 0000:05:00.0: vgaarb: deactivate vga console >[ 6.127862] amdgpu 0000:05:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) >[ 6.127933] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit >[ 6.127940] amdgpu 0000:05:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) >[ 6.127942] amdgpu 0000:05:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF >[ 6.127950] [drm] Detected VRAM RAM=8176M, BAR=256M >[ 6.127951] [drm] RAM width 128bits GDDR6 >[ 6.128046] [drm] amdgpu: 8176M of VRAM memory ready >[ 6.128048] [drm] amdgpu: 15998M of GTT memory ready. >[ 6.128061] [drm] GART: num cpu pages 131072, num gpu pages 131072 >[ 6.128158] [drm] PCIE GART of 512M enabled (table at 0x0000008000800000). >[ 6.167372] hid-generic 0003:413C:2010.0007: input,hidraw6: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:07:00.0-1.3.3.1.1/input0 >[ 6.167822] input: Dell Dell USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.3/5-1.3.3.1/5-1.3.3.1.1/5-1.3.3.1.1:1.1/0003:413C:2010.0008/input/input9 >[ 6.221056] r8169 0000:08:00.0 enp8s0: Link is Down >[ 6.223893] input: Dell Dell USB Keyboard System Control as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.3/5-1.3.3.1/5-1.3.3.1.1/5-1.3.3.1.1:1.1/0003:413C:2010.0008/input/input10 >[ 6.223985] hid-generic 0003:413C:2010.0008: input,hidraw7: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:07:00.0-1.3.3.1.1/input1 >[ 7.658305] input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:1c.1/0000:07:00.0/usb5/5-1/5-1.3/5-1.3.4/5-1.3.4:1.0/0003:28DE:1142.0001/input/input11 >[ 7.660075] amdgpu 0000:05:00.0: amdgpu: STB initialized to 2048 entries >[ 7.660130] [drm] Loading DMUB firmware via PSP: version=0x02020020 >[ 7.660468] [drm] use_doorbell being set to: [true] >[ 7.660479] [drm] use_doorbell being set to: [true] >[ 7.660488] [drm] Found VCN firmware Version ENC: 1.30 DEC: 3 VEP: 0 Revision: 4 >[ 7.660494] amdgpu 0000:05:00.0: amdgpu: Will use PSP to load VCN firmware >[ 7.714076] hid-steam 0003:28DE:1142.0001: input,hidraw0: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input0 >[ 7.714399] hid-steam 0003:28DE:1142.0002: hiddev96: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input1 >[ 7.714623] hid-steam 0003:28DE:1142.0009: hidraw1: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input1 >[ 7.728923] [drm] reserve 0xa00000 from 0x81fd000000 for PSP TMR >[ 7.770466] hid-steam 0003:28DE:1142.0002: Steam wireless receiver connected >[ 7.771833] hid-steam 0003:28DE:1142.0003: hiddev97: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input2 >[ 7.772046] hid-steam 0003:28DE:1142.000A: hidraw2: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input2 >[ 7.827131] hid-steam 0003:28DE:1142.0003: Steam wireless receiver connected >[ 7.828692] hid-steam 0003:28DE:1142.0004: hiddev98: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input3 >[ 7.828916] hid-steam 0003:28DE:1142.000B: hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input3 >[ 7.832758] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available >[ 7.850406] amdgpu 0000:05:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available >[ 7.850427] amdgpu 0000:05:00.0: amdgpu: smu driver if version = 0x0000000f, smu fw if version = 0x00000013, smu fw program = 0, version = 0x003b3100 (59.49.0) >[ 7.850433] amdgpu 0000:05:00.0: amdgpu: SMU driver if version not matched >[ 7.850465] amdgpu 0000:05:00.0: amdgpu: use vbios provided pptable >[ 7.883796] hid-steam 0003:28DE:1142.0004: Steam wireless receiver connected >[ 7.885430] hid-steam 0003:28DE:1142.0005: hiddev99: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input4 >[ 7.885638] hid-steam 0003:28DE:1142.000C: hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:07:00.0-1.3.4/input4 >[ 7.899476] amdgpu 0000:05:00.0: amdgpu: SMU is initialized successfully! >[ 7.899778] [drm] Display Core v3.2.259 initialized on DCN 3.0.2 >[ 7.899781] [drm] DP-HDMI FRL PCON supported >[ 7.900930] [drm] DMUB hardware initialized: version=0x02020020 >[ 7.940465] hid-steam 0003:28DE:1142.0005: Steam wireless receiver connected >[ 8.001522] [drm] kiq ring mec 2 pipe 1 q 0 >[ 8.005662] [drm] VCN decode and encode initialized successfully(under DPG Mode). >[ 8.006490] [drm] JPEG decode initialized successfully. >[ 8.040264] amdgpu: HMM registered 8176MB device memory >[ 8.045090] kfd kfd: amdgpu: Allocated 3969056 bytes on gart >[ 8.045104] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 >[ 8.045259] amdgpu: Virtual CRAT table created for GPU >[ 8.045409] amdgpu: Topology: Add dGPU node [0x73ff:0x1002] >[ 8.045411] kfd kfd: amdgpu: added device 1002:73ff >[ 8.045428] amdgpu 0000:05:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 8, active_cu_number 28 >[ 8.045432] amdgpu 0000:05:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 >[ 8.045434] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 >[ 8.045435] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 >[ 8.045436] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 >[ 8.045437] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 >[ 8.045438] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 >[ 8.045439] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 >[ 8.045440] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 >[ 8.045441] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 >[ 8.045443] amdgpu 0000:05:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0 >[ 8.045444] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 >[ 8.045445] amdgpu 0000:05:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0 >[ 8.045446] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8 >[ 8.045447] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8 >[ 8.045448] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8 >[ 8.045449] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8 >[ 8.047324] amdgpu 0000:05:00.0: amdgpu: Using BACO for runtime pm >[ 8.047756] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:05:00.0 on minor 1 >[ 8.056955] fbcon: amdgpudrmfb (fb0) is primary device >[ 8.057380] [drm] DSC precompute is not needed. >[ 8.282740] Console: switching to colour frame buffer device 240x67 >[ 8.317553] amdgpu 0000:05:00.0: [drm] fb0: amdgpudrmfb frame buffer device >[ 9.640648] r8169 0000:08:00.0 enp8s0: Link is Up - 1Gbps/Full - flow control rx/tx >[ 9.647231] NET: Registered PF_PACKET protocol family >[ 17.550681] BTRFS: device fsid c56a0148-8cb4-4555-a664-a8d9a48a0821 devid 1 transid 447961 /dev/mapper/cr_root scanned by mount (1294) >[ 17.551093] BTRFS info (device dm-1): first mount of filesystem c56a0148-8cb4-4555-a664-a8d9a48a0821 >[ 17.551106] BTRFS info (device dm-1): using crc32c (crc32c-intel) checksum algorithm >[ 17.551113] BTRFS info (device dm-1): using free space tree >[ 17.583113] BTRFS info (device dm-1): enabling ssd optimizations >[ 18.385777] systemd-journald[519]: Received SIGTERM from PID 1 (systemd). >[ 18.517805] systemd[1]: systemd 254.9+suse.30.g31f1148f75 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON -UTMP +SYSVINIT default-hierarchy=unified) >[ 18.517811] systemd[1]: Detected architecture x86-64. >[ 18.983824] systemd[1]: bpf-lsm: LSM BPF program attached >[ 19.220552] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. >[ 19.260764] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid â /run/teamviewerd.pid; please update the unit file accordingly. >[ 19.480968] systemd[1]: systemd-ask-password-plymouth.service: Deactivated successfully. >[ 19.497794] systemd[1]: initrd-switch-root.service: Deactivated successfully. >[ 19.524009] systemd[1]: Stopped Switch Root. >[ 19.525460] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. >[ 19.526204] systemd[1]: Created slice Slice /system/getty. >[ 19.526723] systemd[1]: Created slice Slice /system/modprobe. >[ 19.527246] systemd[1]: Created slice Slice /system/systemd-fsck. >[ 19.527469] systemd[1]: Created slice User and Session Slice. >[ 19.527748] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. >[ 19.527796] systemd[1]: Expecting device /dev/disk/by-id/ata-ST2000DX002-2DV164_Z4Z7T69A-part1... >[ 19.527824] systemd[1]: Expecting device /dev/disk/by-id/ata-WDC_WDS200T2B0B-00YS70_22163P801447-part1... >[ 19.527846] systemd[1]: Expecting device /dev/disk/by-uuid/1b1796f3-d7c2-47a6-bf14-9da8e1dd71f1... >[ 19.527869] systemd[1]: Expecting device /dev/disk/by-uuid/DBDF-3DBE... >[ 19.527893] systemd[1]: Expecting device /dev/mapper/cr_pictures... >[ 19.527916] systemd[1]: Expecting device /dev/mapper/cr_userdir... >[ 19.527953] systemd[1]: Reached target Block Device Preparation for /dev/mapper/cr_root. >[ 19.527988] systemd[1]: Reached target Block Device Preparation for /dev/mapper/cr_swap. >[ 19.528047] systemd[1]: Stopped target Switch Root. >[ 19.528088] systemd[1]: Stopped target Initrd File Systems. >[ 19.528117] systemd[1]: Stopped target Initrd Root File System. >[ 19.528146] systemd[1]: Reached target Local Integrity Protected Volumes. >[ 19.528214] systemd[1]: Reached target Remote File Systems. >[ 19.528253] systemd[1]: Reached target Slice Units. >[ 19.528298] systemd[1]: Reached target System Time Set. >[ 19.528368] systemd[1]: Reached target Local Verity Protected Volumes. >[ 19.528503] systemd[1]: Listening on Device-mapper event daemon FIFOs. >[ 19.529183] systemd[1]: Listening on LVM2 poll daemon socket. >[ 19.555141] systemd[1]: Listening on RPCbind Server Activation Socket. >[ 19.555229] systemd[1]: Reached target RPC Port Mapper. >[ 19.556981] systemd[1]: Listening on Process Core Dump Socket. >[ 19.557396] systemd[1]: Listening on udev Control Socket. >[ 19.557581] systemd[1]: Listening on udev Kernel Socket. >[ 19.558628] systemd[1]: Activating swap /dev/mapper/cr_swap... >[ 19.559707] systemd[1]: Mounting Huge Pages File System... >[ 19.560744] systemd[1]: Mounting POSIX Message Queue File System... >[ 19.561873] systemd[1]: Mounting Kernel Debug File System... >[ 19.562876] systemd[1]: Mounting Kernel Trace File System... >[ 19.563735] Adding 2095104k swap on /dev/mapper/cr_swap. Priority:-2 extents:1 across:2095104k SS >[ 19.564501] systemd[1]: Starting Create List of Static Device Nodes... >[ 19.565678] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... >[ 19.567040] systemd[1]: Starting Load Kernel Module configfs... >[ 19.568398] systemd[1]: Starting Load Kernel Module drm... >[ 19.569662] systemd[1]: Starting Load Kernel Module efi_pstore... >[ 19.571013] systemd[1]: Starting Load Kernel Module fuse... >[ 19.572293] systemd[1]: Starting Load Kernel Module nvme_fabrics... >[ 19.572516] systemd[1]: plymouth-start.service: Deactivated successfully. >[ 19.572560] systemd[1]: plymouth-start.service: Unit process 919 (plymouthd) remains running after unit stopped. >[ 19.583204] fuse: init (API version 7.39) >[ 19.637262] systemd[1]: Stopped Show Plymouth Boot Screen. >[ 19.637602] systemd[1]: Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). >[ 19.637655] systemd[1]: plymouth-switch-root.service: Deactivated successfully. >[ 19.637709] systemd[1]: Stopped Plymouth switch root service. >[ 19.637867] systemd[1]: systemd-fsck-root.service: Deactivated successfully. >[ 19.637917] systemd[1]: Stopped File System Check on Root Device. >[ 19.639879] systemd[1]: Starting Journal Service... >[ 19.641303] systemd[1]: Starting Load Kernel Modules... >[ 19.642495] systemd[1]: Starting Remount Root and Kernel File Systems... >[ 19.643790] systemd[1]: Starting Coldplug All udev Devices... >[ 19.648782] systemd[1]: Activated swap /dev/mapper/cr_swap. >[ 19.650128] systemd[1]: Mounted Huge Pages File System. >[ 19.650394] systemd[1]: Mounted POSIX Message Queue File System. >[ 19.650678] systemd[1]: Mounted Kernel Debug File System. >[ 19.651579] systemd[1]: Mounted Kernel Trace File System. >[ 19.652351] systemd-journald[1364]: Collecting audit messages is disabled. >[ 19.683904] systemd[1]: Finished Create List of Static Device Nodes. >[ 19.684278] systemd[1]: Started Journal Service. >[ 20.298219] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input12 >[ 20.298305] ACPI: button: Power Button [PWRB] >[ 20.298341] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13 >[ 20.298423] ACPI: button: Power Button [PWRF] >[ 20.345395] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20230628/utaddress-204) >[ 20.345405] ACPI: OSL: Resource conflict; ACPI support missing from driver? >[ 20.345409] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20230628/utaddress-204) >[ 20.345414] ACPI: OSL: Resource conflict; ACPI support missing from driver? >[ 20.345519] lpc_ich: Resource conflict(s) found affecting gpio_ich >[ 20.354498] input: PC Speaker as /devices/platform/pcspkr/input/input14 >[ 20.355128] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) >[ 20.355240] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt >[ 20.363725] i2c i2c-9: 4/4 memory slots populated (from DMI) >[ 20.363802] mei_me 0000:00:16.0: enabling device (0000 -> 0002) >[ 20.401533] mei_me 0000:00:16.0: H_RST is set = 0x80000015 >[ 20.420851] systemd-journald[1364]: Received client request to flush runtime journal. >[ 20.467581] systemd-journald[1364]: /var/log/journal/f92d34784c34412aa3f93a50c0aa409e/system.journal: Journal file uses a different sequence number ID, rotating. >[ 20.467588] systemd-journald[1364]: Rotating system journal. >[ 20.529921] audit: type=1400 audit(1709787681.354:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1736 comm="apparmor_parser" >[ 20.530841] audit: type=1400 audit(1709787681.358:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1728 comm="apparmor_parser" >[ 20.531063] audit: type=1400 audit(1709787681.358:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1729 comm="apparmor_parser" >[ 20.531069] audit: type=1400 audit(1709787681.358:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1729 comm="apparmor_parser" >[ 20.531103] audit: type=1400 audit(1709787681.358:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lessopen.sh" pid=1740 comm="apparmor_parser" >[ 20.531346] audit: type=1400 audit(1709787681.358:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="dovecot-anvil" pid=1741 comm="apparmor_parser" >[ 20.531509] audit: type=1400 audit(1709787681.358:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unix-chkpwd" pid=1739 comm="apparmor_parser" >[ 20.531641] audit: type=1400 audit(1709787681.358:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=1738 comm="apparmor_parser" >[ 20.531778] audit: type=1400 audit(1709787681.358:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=1726 comm="apparmor_parser" >[ 20.532041] audit: type=1400 audit(1709787681.358:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="samba-bgqd" pid=1731 comm="apparmor_parser" >[ 20.541863] iTCO_vendor_support: vendor-support=0 >[ 20.542188] gpio_ich gpio_ich.2.auto: GPIO from 512 to 587 >[ 20.544270] mc: Linux media interface: v0.10 >[ 22.530462] mei_me 0000:00:16.0: wait hw ready failed >[ 22.530504] mei_me 0000:00:16.0: hw_start failed ret = -62 fw status = 00004191 167B0100 00000200 00000000 00000000 00000000 >[ 22.530534] mei_me 0000:00:16.0: H_RST is set = 0x80000015 >[ 24.663788] mei_me 0000:00:16.0: wait hw ready failed >[ 24.663823] mei_me 0000:00:16.0: hw_start failed ret = -62 fw status = 00004191 167B0100 00000200 00000000 00000000 00000000 >[ 24.663844] mei_me 0000:00:16.0: H_RST is set = 0x80000015 >[ 26.797130] mei_me 0000:00:16.0: wait hw ready failed >[ 26.797169] mei_me 0000:00:16.0: hw_start failed ret = -62 fw status = 00004191 167B0100 00000200 00000000 00000000 00000000 >[ 26.797188] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device >[ 26.797193] mei_me 0000:00:16.0: reset failed ret = -19 >[ 26.797196] mei_me 0000:00:16.0: link layer initialization failed. >[ 26.797199] mei_me 0000:00:16.0: init hw failure. >[ 26.797289] mei_me 0000:00:16.0: initialization failed. >[ 26.807214] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460) >[ 26.807404] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) >[ 26.827291] videodev: Linux video capture interface: v2.00 >[ 26.905344] Bluetooth: Core ver 2.22 >[ 26.905372] NET: Registered PF_BLUETOOTH protocol family >[ 26.905373] Bluetooth: HCI device and connection manager initialized >[ 26.905380] Bluetooth: HCI socket layer initialized >[ 26.905383] Bluetooth: L2CAP socket layer initialized >[ 26.905386] Bluetooth: SCO socket layer initialized >[ 26.905451] spi-nor spi0.0: w25q128 (16384 Kbytes) >[ 26.908800] EXT4-fs (nvme0n1p4): mounted filesystem 1b1796f3-d7c2-47a6-bf14-9da8e1dd71f1 r/w with ordered data mode. Quota mode: none. >[ 26.911104] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) >[ 26.911678] snd_hda_intel 0000:05:00.1: Force to non-snoop mode >[ 26.912606] Creating 1 MTD partitions on "intel-spi": >[ 26.912611] 0x000000000000-0x000001000000 : "BIOS" >[ 26.918038] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 >[ 26.918047] EDAC sbridge: Seeking for: PCI ID 8086:6fa0 >[ 26.918053] EDAC sbridge: Seeking for: PCI ID 8086:6f60 >[ 26.918057] EDAC sbridge: Seeking for: PCI ID 8086:6f60 >[ 26.918061] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 >[ 26.918065] EDAC sbridge: Seeking for: PCI ID 8086:6fa8 >[ 26.918068] EDAC sbridge: Seeking for: PCI ID 8086:6f71 >[ 26.918072] EDAC sbridge: Seeking for: PCI ID 8086:6f71 >[ 26.918075] EDAC sbridge: Seeking for: PCI ID 8086:6faa >[ 26.918079] EDAC sbridge: Seeking for: PCI ID 8086:6faa >[ 26.918082] EDAC sbridge: Seeking for: PCI ID 8086:6fab >[ 26.918086] EDAC sbridge: Seeking for: PCI ID 8086:6fab >[ 26.918089] EDAC sbridge: Seeking for: PCI ID 8086:6fac >[ 26.918094] EDAC sbridge: Seeking for: PCI ID 8086:6fad >[ 26.918099] EDAC sbridge: Seeking for: PCI ID 8086:6f68 >[ 26.918103] EDAC sbridge: Seeking for: PCI ID 8086:6f68 >[ 26.918106] EDAC sbridge: Seeking for: PCI ID 8086:6f79 >[ 26.918110] EDAC sbridge: Seeking for: PCI ID 8086:6f79 >[ 26.918113] EDAC sbridge: Seeking for: PCI ID 8086:6f6a >[ 26.918117] EDAC sbridge: Seeking for: PCI ID 8086:6f6a >[ 26.918120] EDAC sbridge: Seeking for: PCI ID 8086:6f6b >[ 26.918124] EDAC sbridge: Seeking for: PCI ID 8086:6f6b >[ 26.918127] EDAC sbridge: Seeking for: PCI ID 8086:6f6c >[ 26.918132] EDAC sbridge: Seeking for: PCI ID 8086:6f6d >[ 26.918137] EDAC sbridge: Seeking for: PCI ID 8086:6ffc >[ 26.918140] EDAC sbridge: Seeking for: PCI ID 8086:6ffc >[ 26.918144] EDAC sbridge: Seeking for: PCI ID 8086:6ffd >[ 26.918148] EDAC sbridge: Seeking for: PCI ID 8086:6ffd >[ 26.918151] EDAC sbridge: Seeking for: PCI ID 8086:6faf >[ 26.918155] EDAC sbridge: Seeking for: PCI ID 8086:6faf >[ 26.918229] EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT) >[ 26.918295] EDAC MC1: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#1: DEV 0000:ff:12.4 (INTERRUPT) >[ 26.918296] EDAC sbridge: Ver: 1.1.2 >[ 26.919270] usbcore: registered new interface driver btusb >[ 26.925075] snd_hda_intel 0000:05:00.1: bound 0000:05:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) >[ 26.930061] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card2/input15 >[ 26.930127] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card2/input16 >[ 26.930185] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card2/input17 >[ 26.930229] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card2/input18 >[ 26.930314] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card2/input19 >[ 26.930855] intel_rapl_common: Found RAPL domain package >[ 26.933148] EXT4-fs (dm-2): mounted filesystem 2c6c75a5-48c9-40e5-ac0f-cbb24dbeb412 r/w with ordered data mode. Quota mode: none. >[ 26.933925] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb >[ 26.933932] Bluetooth: hci0: LMP ver=6 subver=22bb; manufacturer=10 >[ 26.937723] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line >[ 26.937728] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >[ 26.937730] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) >[ 26.937732] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 >[ 26.937733] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 >[ 26.937734] snd_hda_codec_realtek hdaudioC1D0: inputs: >[ 26.937736] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 >[ 26.937737] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 >[ 26.937738] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a >[ 26.951085] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 >[ 26.951153] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 >[ 26.951200] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 >[ 26.951237] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 >[ 26.951272] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24 >[ 26.951316] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25 >[ 26.951356] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26 >[ 26.951403] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input27 >[ 27.066371] usb 3-3: 3:1: cannot get freq at ep 0x84 >[ 27.069573] usbcore: registered new interface driver snd-usb-audio >[ 27.070173] usb 3-3: Found UVC 1.00 device USB 2.0 Camera (0c50:e916) >[ 27.072063] usb 3-3: Failed to query (GET_INFO) UVC control 5 on unit 1: 0 (exp. 1). >[ 27.072337] usb 3-3: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1). >[ 27.072462] usb 3-3: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1). >[ 27.072587] usb 3-3: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1). >[ 27.080779] input: USB 2.0 Camera: USB Camera as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input28 >[ 27.080833] usbcore: registered new interface driver uvcvideo >[ 27.417581] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled >[ 27.419926] XFS (dm-3): Mounting V5 Filesystem b4f0ec69-66b0-49be-aa25-b0cd0141e92b >[ 27.675316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >[ 27.675321] Bluetooth: BNEP filters: protocol multicast >[ 27.675327] Bluetooth: BNEP socket layer initialized >[ 27.676513] Bluetooth: MGMT ver 1.22 >[ 27.680353] NET: Registered PF_ALG protocol family >[ 27.968279] NET: Registered PF_QIPCRTR protocol family >[ 27.979925] XFS (dm-3): Ending clean mount >[ 28.364881] bpfilter: Loaded bpfilter_umh pid 2139 >[ 28.365227] Started bpfilter >[ 31.087580] systemd-journald[1364]: /var/log/journal/f92d34784c34412aa3f93a50c0aa409e/user-1000.journal: Journal file uses a different sequence number ID, rotating. >[ 32.622028] block nvme0n1: No UUID available providing old NGUID >[ 34.131682] show_signal: 51 callbacks suppressed >[ 34.131684] traps: chrome[2910] trap int3 ip:5565bf633a40 sp:7fff58ae6890 error:0 in chrome[5565bdae5000+af1a000] >[ 34.438820] usb 3-3: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3). >[ 34.962239] usb 3-3: 3:1: cannot get freq at ep 0x84 >[ 35.182115] usb 3-3: 3:1: cannot get freq at ep 0x84 >[ 35.663971] Bluetooth: RFCOMM TTY layer initialized >[ 35.663980] Bluetooth: RFCOMM socket layer initialized >[ 35.663983] Bluetooth: RFCOMM ver 1.11 >[ 35.729520] usb 3-3: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3). >[ 35.738734] usb 3-3: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3). >[ 35.744375] usb 3-3: Failed to query (GET_DEF) UVC control 12 on unit 1: 0 (exp. 3). >[ 642.193153] BTRFS info (device dm-1): qgroup scan completed (inconsistency flag cleared) >[ 1344.961516] hid-steam 0003:28DE:1142.0002: Steam Controller 'FC6222371C' connected >[ 1345.287765] input: Microsoft X-Box 360 pad 0 as /devices/virtual/input/input29 >[ 1426.178614] hid-steam 0003:28DE:1142.0002: Steam Controller 'FC6222371C' disconnected >[ 1483.793320] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] >[ 1484.008768] ppdev: user-space parallel port driver >[ 1484.010264] lp0: using parport0 (polling). >[ 1484.322523] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] >[ 1484.543243] lp0: using parport0 (polling). >[ 1484.627524] st: Version 20160209, fixed bufsize 32768, s/g segs 256
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 1220909
:
873235
|
873236
|
873237
| 873290 |
873291
|
873292