Attachment 90098 Details for Bug 140904

Output of "dmesg" (PC booted, ehci_hcd unloaded, k3b started)

dmesg (text/plain), 13.32 KB, created by Ulrich Windl on 2006-06-19 07:25:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ulrich Windl

Created: 2006-06-19 07:25:41 UTC

Size: 13.32 KB

patch

obsolete

>Linux version 2.6.13-15.10-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Fri May 12 16:27:12 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ea800 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data)
> BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>On node 0 totalpages: 65520
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61424 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.2 present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6f10
>ACPI: RSDT (v001 PTLTD    RSDT   0x00000001  LTP 0x00000000) @ 0x0fffb7df
>ACPI: FADT (v001 HP     HolmesHZ 0x00000001 PTL  0x00000001) @ 0x0fffb80b
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x00000001  LTP 0x00000001) @ 0x0ffffbd9
>ACPI: DSDT (v001     HP HolmesHZ 0x00000001 MSFT 0x01000007) @ 0x00000000
>ACPI: BIOS age (1999) fails cutoff (2001), acpi=force is required to enable ACPI
>ACPI: acpi=force override
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: local apic disabled
>Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda5 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent acpi=force
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 16384 bytes)
>Detected 467.811 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 253912k/262080k available (2029k kernel code, 7532k reserved, 695k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 936.45 BogoMIPS (lpj=1872918)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel Celeron (Mendocino) stepping 05
>Enabling fast FPU save and restore... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1720k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0e20)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 9 10 *11 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 4 of device 0000:00:04.1
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f4200000-f4ffffff
>  PREFETCH window: f5000000-f5ffffff
>Simple Boot Flag value 0xff read from CMOS RAM was invalid
>Simple Boot Flag at 0x3b set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1150696723.292:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>Limiting direct PCI/PCI transfers.
>vesafb: framebuffer at 0xf5000000, mapped to 0xd0880000, using 6144k, total 8192k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:7580
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>pnp: Device 00:02 activated.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PCI0 COMA  USB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 204k freed
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:04.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: IBM-DTLA-305010, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 19746720 sectors (10110 MB) w/380KiB Cache, CHS=19590/16/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 < hda5 hda6 >
>Probing IDE interface ide1...
>hdc: CD-224E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1])
>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda5: found reiserfs format "3.6" with standard journal
>ReiserFS: hda5: using ordered data mode
>ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda5: checking transaction log (hda5)
>ReiserFS: hda5: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 522072k swap on /dev/hda1.  Priority:42 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:12.2[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: irq 11, io mem 0xf4101400
>ehci_hcd 0000:00:12.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x1080. Vers LK1.1.19
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:04.2: UHCI Host Controller
>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:04.2: irq 11, io base 0x00001000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:12.0: UHCI Host Controller
>uhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:12.0: irq 5, io base 0x00001020
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:12.1[B] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:12.1: UHCI Host Controller
>uhci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:12.1: irq 10, io base 0x00001060
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new high speed USB device using ehci_hcd and address 3
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new high speed USB device using ehci_hcd and address 4
>usb 1-1: device not accepting address 4, error -71
>usb 1-1: new high speed USB device using ehci_hcd and address 5
>usb 1-1: device not accepting address 5, error -71
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
>hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>ide: failed opcode was: unknown
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>loop: registered Twofish encryption 
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on loop0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 17
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (2047 buckets, 16376 max) - 248 bytes per conntrack
>ACPI: Power Button (FF) [PWRF]
>eth0: no IPv6 routers present
>novfs: module not supported by Novell, setting U taint flag.
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>gameport: CS46xx Gameport is pci0000:00:06.0/gameport0, speed 1217kHz
>ehci_hcd 0000:00:12.2: remove, state 1
>usb usb1: USB disconnect, address 1
>ehci_hcd 0000:00:12.2: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:12.2 disabled
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: FREECOM_  Model: DVD+/-RW4B        Rev: 1.33
>  Type:   CD-ROM                             ANSI SCSI revision: 00
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
>usb-storage: device scan complete
>Device sr0 not ready.

Actions: View

Attachments on bug 140904: 90098