Attachment 97633 Details for Bug 202903

Hardware info

hwinfo.txt (text/plain), 209.43 KB, created by Dénes Mátételki on 2006-08-31 13:41:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dénes Mátételki

Created: 2006-08-31 13:41:56 UTC

Size: 209.43 KB

patch

obsolete

>============ start debug info ============
>libhd version 13.0 (ia32)
>using /var/lib/hardware
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/hda1 vga=0x317    resume=/dev/hda2  splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -bios.vram -max -lxrc)
>shm: attached segment 8847364 at 0xb7bb6000
>>> hal.1: read hal data
>  hal: connected to: :1.61
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0_printer_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0_printer_noserial'
>  printer.commandset = { 'ACL' }
>  printer.description = 'HP LaserJet 1020'
>  printer.product = 'HP LaserJet 1020'
>  printer.vendor = 'Hewlett-Packard'
>  info.vendor = 'Hewlett-Packard'
>  linux.device_file = '/dev/usb/lp0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 2 (0x2)
>  printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0'
>  printer.device = '/dev/usb/lp0'
>  info.product = 'HP LaserJet 1020'
>  info.capabilities = { 'printer' }
>  info.category = 'printer'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0'
>  linux.sysfs_path = '/sys/class/usb/lp0'
>
>  1: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_usbraw'
>  linux.device_file = '/dev/bus/usb/001/003'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/001/003'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev1.3'
>
>  2: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Printer Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 7 (0x7)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usblp'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1008 (0x3f0)
>  usb.product_id = 11031 (0x2b17)
>  usb.vendor = 'Hewlett-Packard'
>  usb.product = 'USB Printer Interface'
>  usb.device_revision_bcd = 256 (0x100)
>  usb.max_power = 98 (0x62)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 3 (0x3)
>  usb.serial = 'FN1A2YT'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0'
>
>  3: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = 'FN1A2YT'
>  usb_device.linux.device_number = 3 (0x3)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 98 (0x62)
>  usb_device.device_revision_bcd = 256 (0x100)
>  info.product = 'HP LaserJet 1020'
>  usb_device.product = 'HP LaserJet 1020'
>  info.vendor = 'Hewlett-Packard'
>  usb_device.vendor = 'Hewlett-Packard'
>  usb_device.product_id = 11031 (0x2b17)
>  usb_device.vendor_id = 1008 (0x3f0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-3'
>
>  4: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_pcm_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_pcm_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/audio'
>  linux.device_file = '/dev/audio'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'VIA 8235'
>  oss.card_id = 'V8235'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  oss.device_file = '/dev/audio'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/audio'
>
>  5: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_pcm_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_pcm_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/dsp'
>  linux.device_file = '/dev/dsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'VIA 8235'
>  oss.card_id = 'V8235'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  oss.device_file = '/dev/dsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/dsp'
>
>  6: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_pcm_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_pcm_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/adsp'
>  linux.device_file = '/dev/adsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 1 (0x1)
>  oss.device_id = 'VIA 8235'
>  oss.card_id = 'V8235'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  oss.device_file = '/dev/adsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/adsp'
>
>  7: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_mixer__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_oss_mixer__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/mixer'
>  linux.device_file = '/dev/mixer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 OSS Control Device'
>  oss.type = 'mixer'
>  oss.device_id = 'VIA 8235'
>  oss.card_id = 'V8235'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  oss.device_file = '/dev/mixer'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/mixer'
>
>  8: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/seq'
>  linux.device_file = '/dev/snd/seq'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/seq'
>  info.product = 'ALSA Sequencer Device'
>  alsa.type = 'sequencer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/seq'
>
>  9: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 11 (0xb)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  10: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 11 (0xb)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  11: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = false
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'AMD Athlon(TM) MP 1600+'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  12: udi = '/org/freedesktop/Hal/devices/volume_uuid_41d3da95_0528_4239_90fc_408f8db8d543'
>  volume.unmount.valid_options = { 'lazy' }
>  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet' }
>  org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
>  org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' }
>  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
>  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
>  volume.ignore = false
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_41d3da95_0528_4239_90fc_408f8db8d543'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (reiserfs)'
>  volume.partition.media_size = 81964302336ull (0x1315740000ull)
>  volume.partition.start = 32256ull (0x7e00ull)
>  volume.size = 10742183424ull (0x28048b600ull)
>  volume.num_blocks = 20980827 (0x140245b)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.linux.is_device_mapper = false
>  volume.is_mounted_read_only = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = '41d3da95-0528-4239-90fc-408f8db8d543'
>  volume.fsversion = '3.6'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'reiserfs'
>  storage.model = ''
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  linux.sysfs_path_device = '/sys/block/hda/hda1'
>  linux.sysfs_path = '/sys/block/hda/hda1'
>
>  13: udi = '/org/freedesktop/Hal/devices/volume_part2_size_1077511680'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1077511680'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.partition.media_size = 81964302336ull (0x1315740000ull)
>  volume.partition.start = 10742215680ull (0x280493400ull)
>  volume.size = 1077511680ull (0x40398600ull)
>  volume.num_blocks = 2104515 (0x201cc3)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.linux.is_device_mapper = false
>  volume.is_mounted_read_only = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  storage.model = ''
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  linux.sysfs_path_device = '/sys/block/hda/hda2'
>  linux.sysfs_path = '/sys/block/hda/hda2'
>
>  14: udi = '/org/freedesktop/Hal/devices/volume_uuid_0f040428_b352_4938_8625_3537d5cda27a'
>  volume.unmount.valid_options = { 'lazy' }
>  volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet' }
>  org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' }
>  org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' }
>  org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' }
>  org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.Volume' }
>  volume.ignore = false
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_0f040428_b352_4938_8625_3537d5cda27a'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (reiserfs)'
>  volume.partition.media_size = 81964302336ull (0x1315740000ull)
>  volume.partition.start = 11819727360ull (0x2c082ba00ull)
>  volume.size = 70136962560ull (0x10547d1e00ull)
>  volume.num_blocks = 136986255 (0x82a3e8f)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 3 (0x3)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.linux.is_device_mapper = false
>  volume.is_mounted_read_only = false
>  volume.is_mounted = true
>  volume.mount_point = '/mnt/data'
>  volume.label = ''
>  volume.uuid = '0f040428-b352-4938-8625-3537d5cda27a'
>  volume.fsversion = '3.6'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'reiserfs'
>  storage.model = ''
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  block.is_volume = true
>  block.minor = 3 (0x3)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda3'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  linux.sysfs_path_device = '/sys/block/hda/hda3'
>  linux.sysfs_path = '/sys/block/hda/hda3'
>
>  15: udi = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'Maxtor 6Y080L0'
>  storage.size = 81964302336ull (0x1315740000ull)
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  storage.firmware_version = 'YAR41BW0'
>  storage.serial = 'Y2DWZGSE'
>  storage.vendor = ''
>  storage.model = 'Maxtor 6Y080L0'
>  storage.drive_type = 'disk'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  16: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/timer'
>  linux.device_file = '/dev/snd/timer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/timer'
>  info.product = 'ALSA Timer Device'
>  alsa.type = 'timer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/timer'
>
>  17: udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr_logicaldev_input'
>  input.product = 'PC Speaker'
>  info.product = 'PC Speaker'
>  linux.device_file = '/dev/input/event0'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event0'
>  info.capabilities = { 'input' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  linux.sysfs_path = '/sys/class/input/input0/event0'
>
>  18: udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (pcspkr)'
>  platform.id = 'pcspkr'
>  info.linux.driver = 'pcspkr'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/pcspkr'
>  linux.sysfs_path = '/sys/devices/platform/pcspkr'
>
>  19: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (vesafb.0)'
>  platform.id = 'vesafb.0'
>  info.linux.driver = 'vesafb'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/vesafb.0'
>  linux.sysfs_path = '/sys/devices/platform/vesafb.0'
>
>  20: udi = '/org/freedesktop/Hal/devices/platform_imacfb_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_imacfb_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (imacfb.0)'
>  platform.id = 'imacfb.0'
>  info.linux.driver = 'imacfb'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/imacfb.0'
>  linux.sysfs_path = '/sys/devices/platform/imacfb.0'
>
>  21: udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (serial8250)'
>  platform.id = 'serial8250'
>  info.linux.driver = 'serial8250'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/serial8250'
>  linux.sysfs_path = '/sys/devices/platform/serial8250'
>
>  22: udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (floppy.0)'
>  platform.id = 'floppy.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/floppy.0'
>  linux.sysfs_path = '/sys/devices/platform/floppy.0'
>
>  23: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  24: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input'
>  button.has_state = false
>  button.type = ''
>  info.addons = { 'hald-addon-keyboard' }
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard', 'button' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/input1/event1'
>
>  25: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  26: udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'
>  linux.subsystem = 'platform'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Platform Device (i8042)'
>  platform.id = 'i8042'
>  info.linux.driver = 'i8042'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'platform'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042'
>  linux.sysfs_path = '/sys/devices/platform/i8042'
>
>  27: udi = '/org/freedesktop/Hal/devices/pci_1106_3189'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3189'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT8377 [KT400/KT600 AGP] Host Bridge'
>  pci.product = 'VT8377 [KT400/KT600 AGP] Host Bridge'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32895 (0x807f)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12681 (0x3189)
>  info.linux.driver = 'agpgart-via'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  28: udi = '/org/freedesktop/Hal/devices/pci_1002_4966'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4966'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'RV250 If [Sapphire Radeon 9000 Pro]'
>  pci.subsys_vendor = 'PC Partner Limited'
>  info.product = 'Radeon RV250 If [Radeon 9000]'
>  pci.product = 'Radeon RV250 If [Radeon 9000]'
>  info.vendor = 'ATI Technologies Inc'
>  pci.vendor = 'ATI Technologies Inc'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 5963 (0x174b)
>  pci.subsys_product_id = 29046 (0x7176)
>  pci.vendor_id = 4098 (0x1002)
>  pci.product_id = 18790 (0x4966)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_b168'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>
>  29: udi = '/org/freedesktop/Hal/devices/pci_1002_496e'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1002_496e'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x7177)'
>  pci.subsys_vendor = 'PC Partner Limited'
>  info.product = 'Radeon RV250 [Radeon 9000] (Secondary)'
>  pci.product = 'Radeon RV250 [Radeon 9000] (Secondary)'
>  info.vendor = 'ATI Technologies Inc'
>  pci.vendor = 'ATI Technologies Inc'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 5963 (0x174b)
>  pci.subsys_product_id = 29047 (0x7177)
>  pci.vendor_id = 4098 (0x1002)
>  pci.product_id = 18798 (0x496e)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_b168'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1'
>
>  30: udi = '/org/freedesktop/Hal/devices/pci_1106_b168'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_b168'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'VT8235 PCI Bridge'
>  pci.product = 'VT8235 PCI Bridge'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 45416 (0xb168)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  31: udi = '/org/freedesktop/Hal/devices/net_00_50_bf_59_39_72'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_50_bf_59_39_72'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 346807679346ull (0x50bf593972ull)
>  info.product = 'Networking Interface'
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 3 (0x3)
>  net.address = '00:50:bf:59:39:72'
>  net.interface = 'eth1'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8029'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8029'
>  linux.sysfs_path = '/sys/class/net/eth1'
>
>  32: udi = '/org/freedesktop/Hal/devices/pci_10ec_8029'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8029'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'RTL-8029(AS)'
>  pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.'
>  info.product = 'RTL-8029(AS)'
>  pci.product = 'RTL-8029(AS)'
>  info.vendor = 'Realtek Semiconductor Co., Ltd.'
>  pci.vendor = 'Realtek Semiconductor Co., Ltd.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4332 (0x10ec)
>  pci.subsys_product_id = 32809 (0x8029)
>  pci.vendor_id = 4332 (0x10ec)
>  pci.product_id = 32809 (0x8029)
>  info.linux.driver = 'ne2k-pci'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
>
>  33: udi = '/org/freedesktop/Hal/devices/pci_109e_36e_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e_logicaldev_input'
>  button.has_state = false
>  button.type = ''
>  info.addons = { 'hald-addon-keyboard' }
>  input.product = 'bttv IR (card=34)'
>  info.product = 'bttv IR (card=34)'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.keyboard', 'button' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  input.physical_device = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  linux.sysfs_path = '/sys/class/input/input2/event2'
>
>  34: udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux_1'
>  linux.device_file = '/dev/video0'
>  linux.subsystem = 'video4linux'
>  linux.hotplug_type = 2 (0x2)
>  video4linux.device = '/dev/video0'
>  info.product = 'Video Device'
>  info.capabilities = { 'video4linux' }
>  info.category = 'video4linux'
>  info.parent = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  linux.sysfs_path = '/sys/class/video4linux/video0'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux_0'
>  linux.device_file = '/dev/vbi0'
>  linux.subsystem = 'video4linux'
>  linux.hotplug_type = 2 (0x2)
>  video4linux.device = '/dev/vbi0'
>  info.product = 'Video Device'
>  info.capabilities = { 'video4linux' }
>  info.category = 'video4linux'
>  info.parent = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  linux.sysfs_path = '/sys/class/video4linux/vbi0'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux'
>  info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux'
>  linux.device_file = '/dev/radio0'
>  linux.subsystem = 'video4linux'
>  linux.hotplug_type = 2 (0x2)
>  video4linux.device = '/dev/radio0'
>  info.product = 'Video Device'
>  info.capabilities = { 'video4linux' }
>  info.category = 'video4linux'
>  info.parent = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  linux.sysfs_path = '/sys/class/video4linux/radio0'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x217d)'
>  pci.subsys_vendor = 'Unknown (0x6606)'
>  info.product = 'Bt878 Video Capture'
>  pci.product = 'Bt878 Video Capture'
>  info.vendor = 'Brooktree Corporation'
>  pci.vendor = 'Brooktree Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 26118 (0x6606)
>  pci.subsys_product_id = 8573 (0x217d)
>  pci.vendor_id = 4254 (0x109e)
>  pci.product_id = 878 (0x36e)
>  info.linux.driver = 'bttv'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_109e_878'
>  info.udi = '/org/freedesktop/Hal/devices/pci_109e_878'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x217d)'
>  pci.subsys_vendor = 'Unknown (0x6606)'
>  info.product = 'Bt878 Audio Capture'
>  pci.product = 'Bt878 Audio Capture'
>  info.vendor = 'Brooktree Corporation'
>  pci.vendor = 'Brooktree Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 26118 (0x6606)
>  pci.subsys_product_id = 8573 (0x217d)
>  pci.vendor_id = 4254 (0x109e)
>  pci.product_id = 2168 (0x878)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1'
>
>  39: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:10.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0'
>
>  40: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0_usbraw'
>  linux.device_file = '/dev/bus/usb/002/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/002/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'
>
>  41: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:10.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/usb2'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_1106_3038_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_1'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0'
>
>  43: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:10.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0'
>
>  44: udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0_logicaldev_input'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'input'
>  resmgr.device = '/dev/input/event3'
>  input.product = 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
>  info.product = 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
>  linux.device_file = '/dev/input/event3'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event3'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0'
>  linux.sysfs_path = '/sys/class/input/input3/event3'
>
>  45: udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1118 (0x45e)
>  usb.product_id = 64 (0x40)
>  usb.vendor = 'Microsoft Corp.'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 768 (0x300)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0'
>
>  46: udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial_usbraw'
>  linux.device_file = '/dev/bus/usb/003/002'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/003/002'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev3.2'
>
>  47: udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_45e_40_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 336 (0x150)
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 100 (0x64)
>  usb_device.device_revision_bcd = 768 (0x300)
>  info.product = 'Wheel Mouse Optical'
>  usb_device.product = 'Wheel Mouse Optical'
>  info.vendor = 'Microsoft Corp.'
>  usb_device.vendor = 'Microsoft Corp.'
>  usb_device.product_id = 64 (0x40)
>  usb_device.vendor_id = 1118 (0x45e)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2'
>
>  48: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1_usbraw'
>  linux.device_file = '/dev/bus/usb/003/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/003/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev3.1'
>
>  49: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:10.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.1/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1/usb3'
>
>  50: udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.1'
>
>  51: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:10.2'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0'
>
>  52: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2_usbraw'
>  linux.device_file = '/dev/bus/usb/004/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/004/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev4.1'
>
>  53: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:10.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.18-rc4-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.2/usb4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2/usb4'
>
>  54: udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.2'
>
>  55: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.18-rc4-2-default ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 6 (0x6)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:10.3'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0'
>
>  56: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3_usbraw'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3_usbraw'
>  linux.device_file = '/dev/bus/usb/001/001'
>  linux.subsystem = 'usb_device'
>  linux.hotplug_type = 2 (0x2)
>  usbraw.device = '/dev/bus/usb/001/001'
>  info.product = 'USB Raw Device Access'
>  info.capabilities = { 'usbraw' }
>  info.category = 'usbraw'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3'
>  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'
>
>  57: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:00:10.3'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 6 (0x6)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.18-rc4-2-default ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.18-rc4-2-default ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3104'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.3/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3/usb1'
>
>  58: udi = '/org/freedesktop/Hal/devices/pci_1106_3104'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3104'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X motherboard rev 1.01'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'USB 2.0'
>  pci.product = 'USB 2.0'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12548 (0x3104)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.3'
>
>  59: udi = '/org/freedesktop/Hal/devices/pci_1106_3177'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3177'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT8235 ISA Bridge'
>  pci.product = 'VT8235 ISA Bridge'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12663 (0x3177)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:11.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.0'
>
>  60: udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:11.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1/ide0/0.0'
>
>  61: udi = '/org/freedesktop/Hal/devices/pci_1106_571'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X motherboard rev. 1.01'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'
>  pci.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 1393 (0x571)
>  info.linux.driver = 'VIA_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:11.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.1'
>
>  62: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_playback_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_playback_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D1p'
>  linux.device_file = '/dev/snd/pcmC0D1p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'VIA 8235'
>  alsa.card_id = 'V8235'
>  alsa.device = 1 (0x1)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  alsa.device_file = '/dev/snd/pcmC0D1p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D1p'
>
>  63: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_capture_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_capture_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D1c'
>  linux.device_file = '/dev/snd/pcmC0D1c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'VIA 8235'
>  alsa.card_id = 'V8235'
>  alsa.device = 1 (0x1)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  alsa.device_file = '/dev/snd/pcmC0D1c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D1c'
>
>  64: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_playback_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_playback_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0p'
>  linux.device_file = '/dev/snd/pcmC0D0p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'VIA 8235'
>  alsa.card_id = 'V8235'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  alsa.device_file = '/dev/snd/pcmC0D0p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'
>
>  65: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_capture_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_capture_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0c'
>  linux.device_file = '/dev/snd/pcmC0D0c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'VIA 8235 ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'VIA 8235'
>  alsa.card_id = 'V8235'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  alsa.device_file = '/dev/snd/pcmC0D0c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'
>
>  66: udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_control__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059_alsa_control__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/controlC0'
>  linux.device_file = '/dev/snd/controlC0'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'V8235 ALSA Control Device'
>  alsa.card_id = 'V8235'
>  alsa.type = 'control'
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  alsa.device_file = '/dev/snd/controlC0'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/controlC0'
>
>  67: udi = '/org/freedesktop/Hal/devices/computer'
>  info.callouts.add = { 'hal-storage-cleanup-all-mountpoints' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-standby', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = { 'num_seconds_to_sleep', '', '', '', '', 'enable_power_save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', '', '', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'Standby', 'Shutdown', 'Reboot', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.formfactor = 'desktop'
>  system.product = 'System Name System Version'
>  system.vendor = 'System Manufacturer'
>  smbios.chassis.type = 'Tower'
>  smbios.chassis.manufacturer = 'Chassis Manufacture'
>  smbios.system.uuid = 'Not Settable'
>  smbios.system.serial = 'SYS-1234567890'
>  smbios.system.version = 'System Version'
>  smbios.system.product = 'System Name'
>  smbios.system.manufacturer = 'System Manufacturer'
>  smbios.bios.release_date = '08/06/2003'
>  smbios.bios.version = 'ASUS A7V8X-X ACPI BIOS Revision 1006'
>  smbios.bios.vendor = 'Award Software, Inc.'
>  power_management.can_suspend_to_disk = true
>  power_management.can_suspend_to_ram = false
>  power_management.can_standby = true
>  power_management.can_hibernate = true
>  power_management.can_suspend = false
>  power_management.acpi.linux.version = '20060707'
>  power_management.type = 'acpi'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.18-rc4-2-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>
>  68: udi = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3059'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X Motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT8233/A/8235/8237 AC97 Audio Controller'
>  pci.product = 'VT8233/A/8235/8237 AC97 Audio Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12377 (0x3059)
>  info.linux.driver = 'VIA 82xx Audio'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:11.5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:11.5'
>
>  69: udi = '/org/freedesktop/Hal/devices/net_00_0e_a6_0d_0e_8d'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_0e_a6_0d_0e_8d'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 62915415693ull (0xea60d0e8dull)
>  info.product = 'Networking Interface'
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 2 (0x2)
>  net.address = '00:0e:a6:0d:0e:8d'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3065'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3065'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  70: udi = '/org/freedesktop/Hal/devices/pci_1106_3065'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3065'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'A7V8X-X Motherboard'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'VT6102 [Rhine-II]'
>  pci.product = 'VT6102 [Rhine-II]'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 32929 (0x80a1)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12389 (0x3065)
>  info.linux.driver = 'via-rhine'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:12.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:12.0'
>
>  71: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'System Board'
>  pnp.description = 'System Board'
>  pnp.id = 'PNP0c01'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  72: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PCI Bus'
>  pnp.description = 'PCI Bus'
>  pnp.id = 'PNP0a03'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  73: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  74: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  75: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  76: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  77: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  78: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  79: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PC standard floppy disk controller'
>  pnp.description = 'PC standard floppy disk controller'
>  pnp.id = 'PNP0700'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  80: udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'ECP printer port'
>  pnp.description = 'ECP printer port'
>  pnp.id = 'PNP0401'
>  info.linux.driver = 'parport_pc'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  81: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  82: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
>
>  83: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.id = 'PNP0303'
>  info.linux.driver = 'i8042 kbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
>
>  84: udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Joystick/Game port'
>  pnp.description = 'Joystick/Game port'
>  pnp.id = 'PNPb02f'
>  info.linux.driver = 'ns558'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0c'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0c'
>
>  85: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0d'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0d'
>----- hal device list end -----
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 1 disks
>  bios: 639k low mem
>/dev/mem[0x9fc00, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00400 bytes at 0x9fc00
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf39b0 - 0xf39ce -----
>  f39b0  5f 53 4d 5f 21 1f 02 03 5d 00 00 00 00 00 00 00  "_SM_!...]......."
>  f39c0  5f 44 4d 49 5f 76 70 05 e0 39 0f 00 32 00 23  "_DMI_vp..9..2.#"
>----- SMBIOS Entry Point end -----
>/dev/mem[0xf39e0, 1392]: mmap(, 4096,,,, 0xf3000) ok
>----- SMBIOS Structure Table 0xf39e0 - 0xf3f4f -----
>  f39e0  00 14 00 00 01 02 00 f0 03 03 80 de cb 7f 00 00  "................"
>  f39f0  00 00 07 00 41 77 61 72 64 20 53 6f 66 74 77 61  "....Award Softwa"
>  f3a00  72 65 2c 20 49 6e 63 2e 00 41 53 55 53 20 41 37  "re, Inc..ASUS A7"
>  f3a10  56 38 58 2d 58 20 41 43 50 49 20 42 49 4f 53 20  "V8X-X ACPI BIOS "
>  f3a20  52 65 76 69 73 69 6f 6e 20 31 30 30 36 00 30 38  "Revision 1006.08"
>  f3a30  2f 30 36 2f 32 30 30 33 00 00 01 19 01 00 01 02  "/06/2003........"
>  f3a40  03 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  f3a50  00 00 06 53 79 73 74 65 6d 20 4d 61 6e 75 66 61  "...System Manufa"
>  f3a60  63 74 75 72 65 72 00 53 79 73 74 65 6d 20 4e 61  "cturer.System Na"
>  f3a70  6d 65 00 53 79 73 74 65 6d 20 56 65 72 73 69 6f  "me.System Versio"
>  f3a80  6e 00 53 59 53 2d 31 32 33 34 35 36 37 38 39 30  "n.SYS-1234567890"
>  f3a90  00 00 02 08 02 00 01 02 03 04 41 53 55 53 54 65  "..........ASUSTe"
>  f3aa0  4b 20 43 6f 6d 70 75 74 65 72 20 49 4e 43 2e 00  "K Computer INC.."
>  f3ab0  41 37 56 38 58 2d 58 00 52 45 56 20 31 2e 78 78  "A7V8X-X.REV 1.xx"
>  f3ac0  00 78 78 78 78 78 78 78 78 78 78 78 00 00 03 11  ".xxxxxxxxxxx...."
>  f3ad0  03 00 01 07 02 03 04 03 03 03 02 02 00 00 02 43  "...............C"
>  f3ae0  68 61 73 73 69 73 20 4d 61 6e 75 66 61 63 74 75  "hassis Manufactu"
>  f3af0  72 65 00 43 68 61 73 73 69 73 20 56 65 72 73 69  "re.Chassis Versi"
>  f3b00  6f 6e 00 43 68 61 73 73 69 73 20 53 65 72 69 61  "on.Chassis Seria"
>  f3b10  6c 20 4e 75 6d 62 65 72 00 41 73 73 65 74 2d 31  "l Number.Asset-1"
>  f3b20  32 33 34 35 36 37 38 39 30 00 00 04 20 04 00 01  "234567890... ..."
>  f3b30  03 01 02 62 06 00 00 ff fb 83 03 03 a8 85 00 ca  "...b............"
>  f3b40  08 78 05 41 01 09 00 0a 00 ff ff 53 4f 43 4b 45  ".x.A.......SOCKE"
>  f3b50  54 20 41 00 41 75 74 68 65 6e 74 69 63 41 4d 44  "T A.AuthenticAMD"
>  f3b60  00 41 4d 44 20 41 74 68 6c 6f 6e 28 54 4d 29 20  ".AMD Athlon(TM) "
>  f3b70  4d 50 20 31 36 30 30 2b 00 00 05 16 05 00 03 01  "MP 1600+........"
>  f3b80  02 02 0a 1c 00 40 05 02 03 06 00 07 00 08 00 02  ".....@.........."
>  f3b90  00 00 06 0c 06 00 01 01 00 00 05 08 08 00 44 49  "..............DI"
>  f3ba0  4d 4d 20 31 00 00 06 0c 07 00 01 23 00 00 05 7f  "MM 1.......#...."
>  f3bb0  7f 00 44 49 4d 4d 20 32 00 00 06 0c 08 00 01 45  "..DIMM 2.......E"
>  f3bc0  00 00 05 7f 7f 00 44 49 4d 4d 20 33 00 00 07 13  "......DIMM 3...."
>  f3bd0  09 00 01 80 01 80 00 80 00 30 00 30 00 00 02 04  ".........0.0...."
>  f3be0  05 4c 31 20 43 61 63 68 65 00 00 07 13 0a 00 01  ".L1 Cache......."
>  f3bf0  81 01 00 20 00 01 30 00 30 00 00 02 04 05 4c 32  "... ..0.0.....L2"
>  f3c00  20 43 61 63 68 65 00 00 08 09 0b 00 01 16 00 00  " Cache.........."
>  f3c10  00 50 52 49 4d 41 52 59 20 49 44 45 2f 48 44 44  ".PRIMARY IDE/HDD"
>  f3c20  00 00 08 09 0c 00 01 16 00 00 00 53 45 43 4f 4e  "...........SECON"
>  f3c30  44 41 52 59 20 49 44 45 2f 48 44 44 00 00 08 09  "DARY IDE/HDD...."
>  f3c40  0d 00 01 17 00 00 00 46 4c 4f 50 50 59 00 00 08  ".......FLOPPY..."
>  f3c50  09 0e 00 00 00 01 12 10 55 53 42 31 00 00 08 09  "........USB1...."
>  f3c60  0f 00 00 00 01 12 10 55 53 42 32 00 00 08 09 10  ".......USB2....."
>  f3c70  00 00 00 01 12 10 55 53 42 33 00 00 08 09 11 00  "......USB3......"
>  f3c80  00 00 01 12 10 55 53 42 34 00 00 08 09 12 00 00  ".....USB4......."
>  f3c90  00 01 12 10 55 53 42 35 00 00 08 09 13 00 00 00  "....USB5........"
>  f3ca0  01 12 10 55 53 42 36 00 00 08 09 14 00 00 00 01  "...USB6........."
>  f3cb0  0f 0d 50 53 2f 32 20 4b 65 79 62 6f 61 72 64 00  "..PS/2 Keyboard."
>  f3cc0  00 08 09 15 00 00 00 01 0f 0e 50 53 2f 32 20 4d  "..........PS/2 M"
>  f3cd0  6f 75 73 65 00 00 08 09 16 00 00 00 01 05 05 50  "ouse...........P"
>  f3ce0  61 72 61 6c 6c 65 6c 20 50 6f 72 74 00 00 08 09  "arallel Port...."
>  f3cf0  17 00 00 00 01 08 08 53 65 72 69 61 6c 20 50 6f  ".......Serial Po"
>  f3d00  72 74 20 31 00 00 08 09 18 00 00 00 01 08 08 53  "rt 1...........S"
>  f3d10  65 72 69 61 6c 20 50 6f 72 74 20 32 00 00 08 09  "erial Port 2...."
>  f3d20  19 00 00 00 01 07 0c 4a 6f 79 73 74 69 63 6b 20  ".......Joystick "
>  f3d30  50 6f 72 74 00 00 08 09 1a 00 00 00 01 07 0b 4d  "Port...........M"
>  f3d40  49 44 49 20 50 6f 72 74 00 00 08 09 1b 00 00 00  "IDI Port........"
>  f3d50  01 1f 1d 4c 69 6e 65 20 49 6e 20 4a 61 63 6b 00  "...Line In Jack."
>  f3d60  00 08 09 1c 00 00 00 01 0b 1f 4c 41 4e 2d 30 30  "..........LAN-00"
>  f3d70  30 45 41 36 30 44 30 45 38 44 36 00 00 09 0d 1d  "0EA60D0E8D6....."
>  f3d80  00 01 06 05 03 03 01 00 06 01 50 43 49 20 31 00  "..........PCI 1."
>  f3d90  00 09 0d 1e 00 01 06 05 04 03 02 00 06 01 50 43  "..............PC"
>  f3da0  49 20 32 00 00 09 0d 1f 00 01 06 05 03 03 03 00  "I 2............."
>  f3db0  06 01 50 43 49 20 33 00 00 09 0d 20 00 01 06 05  "..PCI 3.... ...."
>  f3dc0  04 03 04 00 06 01 50 43 49 20 34 00 00 09 0d 21  "......PCI 4....!"
>  f3dd0  00 01 06 05 03 03 05 00 06 01 50 43 49 20 35 00  "..........PCI 5."
>  f3de0  00 09 0d 22 00 01 06 05 03 03 06 00 06 01 50 43  "..."..........PC"
>  f3df0  49 20 36 00 00 09 0d 23 00 01 11 05 04 03 07 00  "I 6....#........"
>  f3e00  04 00 41 47 50 00 00 0b 05 24 00 02 30 00 30 00  "..AGP....$..0.0."
>  f3e10  00 0d 16 25 00 01 01 00 00 00 00 00 00 00 00 00  "...%............"
>  f3e20  00 00 00 00 00 00 01 65 6e 7c 55 53 7c 69 73 6f  ".......en|US|iso"
>  f3e30  38 38 35 39 2d 31 00 00 0e 0e 26 00 01 04 04 00  "8859-1....&....."
>  f3e40  07 09 00 07 0a 00 43 70 75 20 4d 6f 64 75 6c 65  "......Cpu Module"
>  f3e50  00 00 0e 1d 27 00 01 10 27 00 11 28 00 14 2c 00  "....'...'..(..,."
>  f3e60  11 29 00 14 2d 00 11 2a 00 14 2e 00 13 2b 00 4d  ".)..-..*.....+.M"
>  f3e70  65 6d 6f 72 79 20 4d 6f 64 75 6c 65 20 53 65 74  "emory Module Set"
>  f3e80  00 00 10 0f 28 00 03 03 03 00 00 30 00 fe ff 03  "....(......0...."
>  f3e90  00 00 00 11 17 29 00 28 00 ff ff 40 00 40 00 00  ".....).(...@.@.."
>  f3ea0  01 09 01 01 00 03 80 00 00 00 44 44 52 20 31 00  "..........DDR 1."
>  f3eb0  00 11 17 2a 00 28 00 ff ff 00 00 00 00 00 00 09  "...*.(.........."
>  f3ec0  02 01 00 03 80 00 00 00 44 44 52 20 32 00 00 11  "........DDR 2..."
>  f3ed0  17 2b 00 28 00 ff ff 00 00 00 00 00 00 09 03 01  ".+.(............"
>  f3ee0  00 03 80 00 00 00 44 44 52 20 33 00 00 13 0f 2c  "......DDR 3....,"
>  f3ef0  00 00 00 00 00 ff ff 03 00 27 00 02 00 00 14 13  ".........'......"
>  f3f00  2d 00 00 00 00 00 ff ff 03 00 29 00 2b 00 01 00  "-.........).+..."
>  f3f10  00 00 00 7e 13 2e 00 00 00 04 00 ff ff 03 00 2a  "...~...........*"
>  f3f20  00 2b 00 02 00 00 00 00 7e 13 2f 00 00 00 04 00  ".+......~./....."
>  f3f30  ff ff 03 00 2b 00 2b 00 03 00 00 00 00 20 0b 30  "....+.+...... .0"
>  f3f40  00 00 00 00 00 00 00 00 00 00 7f 04 31 00 00 00  "............1..."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 14 00 00 01 02 00 f0 03 03 80 de cb 7f 00 00 00 00 07 00
>       str1: "Award Software, Inc."
>       str2: "ASUS A7V8X-X ACPI BIOS Revision 1006"
>       str3: "08/06/2003"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
>       str1: "System Manufacturer"
>       str2: "System Name"
>       str3: "System Version"
>       str4: "SYS-1234567890"
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str1: "ASUSTeK Computer INC."
>       str2: "A7V8X-X"
>       str3: "REV 1.xx"
>       str4: "xxxxxxxxxxx"
>  type 0x03 [0x0003]: 03 11 03 00 01 07 02 03 04 03 03 03 02 02 00 00 02
>       str1: "Chassis Manufacture"
>       str2: "Chassis Version"
>       str3: "Chassis Serial Number"
>       str4: "Asset-1234567890"
>  type 0x04 [0x0004]: 04 20 04 00 01 03 01 02 62 06 00 00 ff fb 83 03 03 a8 85 00 ca 08 78 05 41 01 09 00 0a 00 ff ff
>       str1: "SOCKET A"
>       str2: "AuthenticAMD"
>       str3: "AMD Athlon(TM) MP 1600+"
>  type 0x05 [0x0005]: 05 16 05 00 03 01 02 02 0a 1c 00 40 05 02 03 06 00 07 00 08 00 02
>  type 0x06 [0x0006]: 06 0c 06 00 01 01 00 00 05 08 08 00
>       str1: "DIMM 1"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 00 00 05 7f 7f 00
>       str1: "DIMM 2"
>  type 0x06 [0x0008]: 06 0c 08 00 01 45 00 00 05 7f 7f 00
>       str1: "DIMM 3"
>  type 0x07 [0x0009]: 07 13 09 00 01 80 01 80 00 80 00 30 00 30 00 00 02 04 05
>       str1: "L1 Cache"
>  type 0x07 [0x000a]: 07 13 0a 00 01 81 01 00 20 00 01 30 00 30 00 00 02 04 05
>       str1: "L2 Cache"
>  type 0x08 [0x000b]: 08 09 0b 00 01 16 00 00 00
>       str1: "PRIMARY IDE/HDD"
>  type 0x08 [0x000c]: 08 09 0c 00 01 16 00 00 00
>       str1: "SECONDARY IDE/HDD"
>  type 0x08 [0x000d]: 08 09 0d 00 01 17 00 00 00
>       str1: "FLOPPY"
>  type 0x08 [0x000e]: 08 09 0e 00 00 00 01 12 10
>       str1: "USB1"
>  type 0x08 [0x000f]: 08 09 0f 00 00 00 01 12 10
>       str1: "USB2"
>  type 0x08 [0x0010]: 08 09 10 00 00 00 01 12 10
>       str1: "USB3"
>  type 0x08 [0x0011]: 08 09 11 00 00 00 01 12 10
>       str1: "USB4"
>  type 0x08 [0x0012]: 08 09 12 00 00 00 01 12 10
>       str1: "USB5"
>  type 0x08 [0x0013]: 08 09 13 00 00 00 01 12 10
>       str1: "USB6"
>  type 0x08 [0x0014]: 08 09 14 00 00 00 01 0f 0d
>       str1: "PS/2 Keyboard"
>  type 0x08 [0x0015]: 08 09 15 00 00 00 01 0f 0e
>       str1: "PS/2 Mouse"
>  type 0x08 [0x0016]: 08 09 16 00 00 00 01 05 05
>       str1: "Parallel Port"
>  type 0x08 [0x0017]: 08 09 17 00 00 00 01 08 08
>       str1: "Serial Port 1"
>  type 0x08 [0x0018]: 08 09 18 00 00 00 01 08 08
>       str1: "Serial Port 2"
>  type 0x08 [0x0019]: 08 09 19 00 00 00 01 07 0c
>       str1: "Joystick Port"
>  type 0x08 [0x001a]: 08 09 1a 00 00 00 01 07 0b
>       str1: "MIDI Port"
>  type 0x08 [0x001b]: 08 09 1b 00 00 00 01 1f 1d
>       str1: "Line In Jack"
>  type 0x08 [0x001c]: 08 09 1c 00 00 00 01 0b 1f
>       str1: "LAN-000EA60D0E8D6"
>  type 0x09 [0x001d]: 09 0d 1d 00 01 06 05 03 03 01 00 06 01
>       str1: "PCI 1"
>  type 0x09 [0x001e]: 09 0d 1e 00 01 06 05 04 03 02 00 06 01
>       str1: "PCI 2"
>  type 0x09 [0x001f]: 09 0d 1f 00 01 06 05 03 03 03 00 06 01
>       str1: "PCI 3"
>  type 0x09 [0x0020]: 09 0d 20 00 01 06 05 04 03 04 00 06 01
>       str1: "PCI 4"
>  type 0x09 [0x0021]: 09 0d 21 00 01 06 05 03 03 05 00 06 01
>       str1: "PCI 5"
>  type 0x09 [0x0022]: 09 0d 22 00 01 06 05 03 03 06 00 06 01
>       str1: "PCI 6"
>  type 0x09 [0x0023]: 09 0d 23 00 01 11 05 04 03 07 00 04 00
>       str1: "AGP"
>  type 0x0b [0x0024]: 0b 05 24 00 02
>       str1: "0"
>       str2: "0"
>  type 0x0d [0x0025]: 0d 16 25 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
>       str1: "en|US|iso8859-1"
>  type 0x0e [0x0026]: 0e 0e 26 00 01 04 04 00 07 09 00 07 0a 00
>       str1: "Cpu Module"
>  type 0x0e [0x0027]: 0e 1d 27 00 01 10 27 00 11 28 00 14 2c 00 11 29 00 14 2d 00 11 2a 00 14 2e 00 13 2b 00
>       str1: "Memory Module Set"
>  type 0x10 [0x0028]: 10 0f 28 00 03 03 03 00 00 30 00 fe ff 03 00
>  type 0x11 [0x0029]: 11 17 29 00 28 00 ff ff 40 00 40 00 00 01 09 01 01 00 03 80 00 00 00
>       str1: "DDR 1"
>  type 0x11 [0x002a]: 11 17 2a 00 28 00 ff ff 00 00 00 00 00 00 09 02 01 00 03 80 00 00 00
>       str1: "DDR 2"
>  type 0x11 [0x002b]: 11 17 2b 00 28 00 ff ff 00 00 00 00 00 00 09 03 01 00 03 80 00 00 00
>       str1: "DDR 3"
>  type 0x13 [0x002c]: 13 0f 2c 00 00 00 00 00 ff ff 03 00 27 00 02
>  type 0x14 [0x002d]: 14 13 2d 00 00 00 00 00 ff ff 03 00 29 00 2b 00 01 00 00
>  type 0x7e [0x002e]: 7e 13 2e 00 00 00 04 00 ff ff 03 00 2a 00 2b 00 02 00 00
>  type 0x7e [0x002f]: 7e 13 2f 00 00 00 04 00 ff ff 03 00 2b 00 2b 00 03 00 00
>  type 0x20 [0x0030]: 20 0b 30 00 00 00 00 00 00 00 00
>  type 0x7f [0x0031]: 7f 04 31 00
>  smbios: stopped at end tag
>>> bios.3: smp
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 00 00 00 00 00 00 78 03 00 00 00 00 c0 9f  "........x......."
>  410  27 42 00 7f 02 00 00 20 00 00 1e 00 1e 00 00 00  "'B..... ........"
>  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  1a 00 c0 00 00 00 00 00 00 54 80 00 00 a0 00 00  ".........T......"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 03 00 00 c0 ff 1c 4f 09 00  ".....)0......O.."
>  470  00 00 00 00 00 01 00 00 14 14 14 14 01 01 01 01  "................"
>  480  1e 00 3e 00 2f 10 00 60 f9 11 0b 81 50 01 00 03  "..>./..`....P..."
>  490  00 00 00 00 00 00 10 12 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 9c 1f 00 c0 00 00 00 00  "................"
>  4b0  00 80 2c 02 00 00 00 00 00 00 00 00 ff 00 00 00  "..,............."
>  4c0  00 00 00 01 00 00 00 00 68 00 00 00 00 00 00 00  "........h......."
>  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9fc00 - 0x9ffff -----
>  9fc00  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fca0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fce0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd60  00 0d 09 00 00 02 00 80 00 00 00 00 00 00 00 00  "................"
>  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fea0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fff0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>>> bios.4: vbe
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 53248]: mmap(, 53248,,,, 0xc0000) ok
>vbe: BIOS chksum wrong
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:1f28: fb fc 80 fc a0 0f 84 29
>>> bios.4.1: vbe info
>vm86: using CPU emulation
>>> bios.5: 32
>  bios32: valid SD header at 0xf2040 (size 0x10, rev 0), SD at 0xf1960
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.18-rc4-2-default (geeko@buildhost) (gcc version 4.1.2 20060731 (prerelease) (SUSE Linux)) #1 Tue Aug 8 09:58:49 UTC 2006
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
>  <4> BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
>  <4> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
>  <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>255MB LOWMEM available.
>  <6>No mptable found.
>  <7>On node 0 totalpages: 65532
>  <7>  DMA zone: 4096 pages, LIFO batch:0
>  <7>  Normal zone: 61436 pages, LIFO batch:15
>  <6>DMI 2.3 present.
>  <7>ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5f50
>  <7>ACPI: RSDT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x0fffc000
>  <7>ACPI: FADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x0fffc0b2
>  <7>ACPI: BOOT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x0fffc030
>  <7>ACPI: MADT (v001 ASUS   A7V8X-X  0x42302e31 MSFT 0x31313031) @ 0x0fffc058
>  <7>ACPI: DSDT (v001   ASUS A7V8X-X  0x00001000 MSFT 0x0100000b) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0xe408
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>  <4>Processor #0 6:6 APIC version 16
>  <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>  <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>  <4>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>  <7>ACPI: IRQ0 used by override.
>  <7>ACPI: IRQ2 used by override.
>  <7>ACPI: IRQ9 used by override.
>  <4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>  <6>Using ACPI (MADT) for SMP configuration information
>  <4>Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
>  <4>Detected 1393.325 MHz processor.
>  <4>Built 1 zonelists.  Total pages: 65532
>  <5>Kernel command line: root=/dev/hda1 vga=0x317    resume=/dev/hda2  splash=silent
>  <6>bootsplash: silent mode.
>  <7>mapped APIC to ffffd000 (fee00000)
>  <7>mapped IOAPIC to ffffc000 (fec00000)
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 1024 (order: 10, 4096 bytes)
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>  <4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>  <6>Memory: 254108k/262128k available (1587k kernel code, 7520k reserved, 623k data, 172k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 2788.84 BogoMIPS (lpj=5577693)
>  <6>Security Framework v1.0.0 initialized
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>  <7>CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
>  <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>  <6>CPU: L2 Cache: 256K (64 bytes/line)
>  <7>CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <4>Compat vDSO mapped to ffffe000.
>  <4>CPU: AMD Athlon(TM) MP 1600+ stepping 02
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 2216k freed
>  <6>ACPI: Core revision 20060707
>  <4> not found!
>  <4>ENABLING IO-APIC IRQs
>  <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
>  <4>Setting up standard PCI resources
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using IOAPIC for interrupt routing
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12)
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <7>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>  <4>PCI quirk: region e400-e47f claimed by vt8235 PM
>  <4>PCI quirk: region e800-e80f claimed by vt8235 SMB
>  <7>Boot video device is 0000:01:00.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 14 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <6>pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
>  <6>pnp: 00:02: ioport range 0xe800-0xe81f could not be reserved
>  <6>pnp: 00:0d: ioport range 0x290-0x297 has been reserved
>  <6>pnp: 00:0d: ioport range 0x370-0x375 has been reserved
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: d000-dfff
>  <6>  MEM window: de000000-deffffff
>  <6>  PREFETCH window: e0000000-f7ffffff
>  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>  <4>TCP established hash table entries: 8192 (order: 3, 32768 bytes)
>  <4>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
>  <6>TCP: Hash tables configured (established 8192 bind 4096)
>  <6>TCP reno registered
>  <6>Simple Boot Flag at 0x3a set to 0x1
>  <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <5>audit(1157015910.672:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered (default)
>  <6>vesafb: framebuffer at 0xf0000000, mapped to 0xd0880000, using 6144k, total 131072k
>  <6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
>  <6>vesafb: protected mode interface info at c000:575a
>  <6>vesafb: pmi: set display start = c00c57ee, set palette = c00c583a
>  <6>vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47089 bytes,<6>...found (1024x768, 27542 bytes, v3).
>  <4>Console: switching to colour frame buffer device 124x44
>  <6>fb0: VESA VGA frame buffer device
>  <6>imacfb: framebuffer at 0x80010000, mapped to 0xd1080000, using 14175k, total 16384k
>  <6>imacfb: mode is 1680x1050x32, linelength=6912, pages=1
>  <6>imacfb: scrolling: redraw
>  <6>imacfb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>  <6>fb1: IMAC VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12ac
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a post-1991 82077
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>  <4>PNP: PS/2 controller doesn't have AUX irq; using default 12
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker as /class/input/input0
>  <6>input: AT Translated Set 2 keyboard as /class/input/input1
>  <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 4.39
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <6>ACPI: (supports S0 S1 S4 S5)
>  <6>Time: tsc clocksource has been installed.
>  <6>Freeing unused kernel memory: 172k freed
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <6>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>  <4>ACPI: Unable to derive IRQ for device 0000:00:11.1
>  <4>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>  <6>PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
>  <6>VP_IDE: chipset revision 6
>  <6>VP_IDE: not 100% native mode: will probe irqs later
>  <6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>  <6>    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: Maxtor 6Y080L0, ATA DISK drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: max request size: 128KiB
>  <6>hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
>  <6>hda: cache flushes supported
>  <6> hda: hda1 hda2 hda3
>  <7>Probing IDE interface ide1...
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <4>Attempting manual resume
>  <5>ReiserFS: hda1: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: hda1: using ordered data mode
>  <4>reiserfs: using flush barriers
>  <5>ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: hda1: checking transaction log (hda1)
>  <5>ReiserFS: hda1: Using r5 hash to sort names
>  <6>parport: PnPBIOS parport detected.
>  <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>  <6>lp0: using parport0 (interrupt-driven).
>  <6>gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 1147kHz
>  <6>Linux video capture interface: v2.00
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
>  <6>ehci_hcd 0000:00:10.3: EHCI Host Controller
>  <6>USB Universal Host Controller Interface driver v3.0
>  <6>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
>  <6>ehci_hcd 0000:00:10.3: irq 169, io mem 0xdd800000
>  <6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>  <6>usb usb1: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb1: Product: EHCI Host Controller
>  <6>usb usb1: Manufacturer: Linux 2.6.18-rc4-2-default ehci_hcd
>  <6>usb usb1: SerialNumber: 0000:00:10.3
>  <6>usb usb1: configuration #1 chosen from 1 choice
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 6 ports detected
>  <6>bttv: driver version 0.9.16 loaded
>  <6>bttv: using 8 buffers with 2080k (520 pages) each for capture
>  <6>via-rhine.c:v1.10-LK1.4.0 June-27-2006 Written by Donald Becker
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <6>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
>  <6>PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 9
>  <6>uhci_hcd 0000:00:10.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:10.0: irq 169, io base 0x0000b400
>  <6>usb usb2: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb2: Product: UHCI Host Controller
>  <6>usb usb2: Manufacturer: Linux 2.6.18-rc4-2-default uhci_hcd
>  <6>usb usb2: SerialNumber: 0000:00:10.0
>  <6>usb usb2: configuration #1 chosen from 1 choice
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
>  <6>PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 9
>  <6>uhci_hcd 0000:00:10.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>  <6>uhci_hcd 0000:00:10.1: irq 169, io base 0x0000b000
>  <6>usb usb3: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb3: Product: UHCI Host Controller
>  <6>usb usb3: Manufacturer: Linux 2.6.18-rc4-2-default uhci_hcd
>  <6>usb usb3: SerialNumber: 0000:00:10.1
>  <6>usb usb3: configuration #1 chosen from 1 choice
>  <6>hub 3-0:1.0: USB hub found
>  <6>hub 3-0:1.0: 2 ports detected
>  <6>ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>  <6>  http://www.scyld.com/network/ne2k-pci.html
>  <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>  <6>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
>  <6>PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 9
>  <6>uhci_hcd 0000:00:10.2: UHCI Host Controller
>  <6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>  <6>uhci_hcd 0000:00:10.2: irq 169, io base 0x0000a800
>  <6>usb usb4: new device found, idVendor=0000, idProduct=0000
>  <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb4: Product: UHCI Host Controller
>  <6>usb usb4: Manufacturer: Linux 2.6.18-rc4-2-default uhci_hcd
>  <6>usb usb4: SerialNumber: 0000:00:10.2
>  <6>usb usb4: configuration #1 chosen from 1 choice
>  <6>hub 4-0:1.0: USB hub found
>  <6>hub 4-0:1.0: 2 ports detected
>  <6>NET: Registered protocol family 23
>  <6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
>  <6>eth0: VIA Rhine II at 0x1a000, 00:0e:a6:0d:0e:8d, IRQ 177.
>  <6>eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
>  <6>bttv: Bt8xx card found (0).
>  <4>PCI: Enabling device 0000:00:0f.0 (0004 -> 0006)
>  <6>ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 185
>  <6>bttv0: Bt878 (rev 2) at 0000:00:0f.0, irq: 185, latency: 32, mmio: 0xdf800000
>  <6>bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 6606:217d
>  <6>bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]
>  <7>bttv0: gpio: en=00000000, out=00000000 in=00ffff07 [init]
>  <4>bttv0: using tuner=5
>  <6>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>  <6>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>  <6>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>  <6>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>  <4>via_ircc: module not supported by Novell, setting U taint flag.
>  <6>tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
>  <6>tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>  <6>bttv0: registered device video0
>  <6>bttv0: registered device vbi0
>  <6>bttv0: registered device radio0
>  <6>bttv0: PLL: 28636363 => 35468950 .. ok
>  <6>input: bttv IR (card=34) as /class/input/input2
>  <4>bttv-input: bttv IR (card=34) detected at pci-0000:00:0f.0/ir0
>  <6>agpgart: Detected VIA KT400/KT400A/KT600 chipset
>  <6>agpgart: AGP aperture is 64M @ 0xf8000000
>  <4>PCI: Enabling device 0000:00:0d.0 (0000 -> 0001)
>  <6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 193
>  <4>eth1: RealTek RTL-8029 found at 0xb800, IRQ 193, 00:50:BF:59:39:72.
>  <4>bt878: module not supported by Novell, setting U taint flag.
>  <6>bt878: AUDIO driver version 0.0.0 loaded
>  <6>bt878: Bt878 AUDIO function found (0).
>  <4>PCI: Enabling device 0000:00:0f.1 (0004 -> 0006)
>  <6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 18 (level, low) -> IRQ 185
>  <4>bt878_probe: card id=[0x217d6606], Unknown card.
>  <4>Exiting..
>  <6>ACPI: PCI interrupt for device 0000:00:0f.1 disabled
>  <4>bt878: probe of 0000:00:0f.1 failed with error -22
>  <6>usb 3-2: new low speed USB device using uhci_hcd and address 2
>  <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>  <6>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
>  <7>PCI: Setting latency timer of device 0000:00:11.5 to 64
>  <6>usb 3-2: new device found, idVendor=045e, idProduct=0040
>  <6>usb 3-2: new device strings: Mfr=1, Product=3, SerialNumber=0
>  <6>usb 3-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
>  <6>usb 3-2: Manufacturer: Microsoft
>  <6>usb 3-2: configuration #1 chosen from 1 choice
>  <3>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>  <3>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>  <3>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>  <3>ALSA sound/pci/via82xx.c:580: codec_read: codec 0 is not valid [0xfe0000]
>  <6>usbcore: registered new driver hiddev
>  <6>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
>  <6>input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.1-2
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>  <6>Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1 across:1052248k
>  <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>  <6>loop: loaded (max 8 devices)
>  <5>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: hda3: using ordered data mode
>  <4>reiserfs: using flush barriers
>  <5>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: hda3: checking transaction log (hda3)
>  <5>ReiserFS: hda3: Using r5 hash to sort names
>  <6>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>  <5>audit(1157015940.329:2): AppArmor (version 2.0-19.43r6320) initialized
>  <4>
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>ACPI: Power Button (CM) [PWRB]
>  <6>eth0: link down
>  <6>NET: Registered protocol family 17
>  <5>audit(1157015968.506:3): audit_pid=3680 old=0 by auid=4294967295
>  <6>NET: Registered protocol family 10
>  <6>lo: Disabled Privacy Extensions
>  <6>ADDRCONF(NETDEV_UP): eth0: link is not ready
>  <6>IPv6 over IPv4 tunneling driver
>  <6>powernow-k8: Processor cpuid 662 not supported
>  <6>bootsplash: status on console 0 changed to on
>  <7>eth1: no IPv6 routers present
>  <6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>  <6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>  <7>eth0: no IPv6 routers present
>  <6>usb 1-3: new high speed USB device using ehci_hcd and address 3
>  <6>usb 1-3: new device found, idVendor=03f0, idProduct=2b17
>  <6>usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>  <6>usb 1-3: Product: HP LaserJet 1020
>  <6>usb 1-3: Manufacturer: Hewlett-Packard
>  <6>usb 1-3: SerialNumber: FN1A2YT
>  <6>usb 1-3: configuration #1 chosen from 1 choice
>  <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
>  <6>usbcore: registered new driver usblp
>  <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>  <4>ip_tables: (C) 2000-2006 Netfilter Core Team
>  <5>SCSI subsystem initialized
>  <6>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc io=0x378 irq=none,none,none" -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: open(/dev/fd0) timed out
>misc.floppy: removing floppy entry 2 (timed out)
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  01f0-01f7 : ide0
>  0200-0207 : ns558-pnp
>  0290-0297 : pnp 00:0d
>  0370-0375 : pnp 00:0d
>  0378-037a : parport0
>  03c0-03df : vesafb
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  03f8-03ff : serial
>  a000-a0ff : 0000:00:12.0
>    a000-a0ff : via-rhine
>  a400-a40f : 0000:00:11.1
>    a400-a407 : ide0
>    a408-a40f : ide1
>  a800-a81f : 0000:00:10.2
>    a800-a81f : uhci_hcd
>  b000-b01f : 0000:00:10.1
>    b000-b01f : uhci_hcd
>  b400-b41f : 0000:00:10.0
>    b400-b41f : uhci_hcd
>  b800-b81f : 0000:00:0d.0
>    b800-b81f : ne2k-pci
>  d000-dfff : PCI Bus #01
>    d800-d8ff : 0000:01:00.0
>  e000-e0ff : 0000:00:11.5
>    e000-e0ff : VIA8233
>  e400-e47f : 0000:00:11.0
>    e400-e47f : motherboard
>      e400-e403 : ACPI PM1a_EVT_BLK
>      e404-e405 : ACPI PM1a_CNT_BLK
>      e408-e40b : ACPI PM_TMR
>      e420-e423 : ACPI GPE0_BLK
>  e800-e80f : 0000:00:11.0
>    e800-e807 : vt596_smbus
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:    3928163    IO-APIC-edge  timer
>    1:      11922    IO-APIC-edge  i8042
>    4:          3    IO-APIC-edge  serial
>    6:         19    IO-APIC-edge  floppy
>    8:          2    IO-APIC-edge  rtc
>    9:          0   IO-APIC-level  acpi
>   14:     288169    IO-APIC-edge  ide0
>  169:     119940   IO-APIC-level  ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4
>  177:         29   IO-APIC-level  eth0
>  185:          8   IO-APIC-level  bttv0
>  193:     157782   IO-APIC-level  eth1
>  201:     263609   IO-APIC-level  VIA8233
>  NMI:          0 
>  LOC:    3928161 
>  ERR:         12
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 6
>  model		: 6
>  model name	: AMD Athlon(TM) MP 1600+
>  stepping	: 2
>  cpu MHz		: 1393.325
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts
>  bogomips	: 2788.84
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0xfffc000
>  klog mem 0: 0xf827000
>  klog mem 1: 0x0
>  klog mem:   0xf827000
> -- <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> -- <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
> -- <4> BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
> -- <4> BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
> -- <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> -- <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> -- <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0xff9bc00
>  meminfo:    0xfa99000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xf0ea9dda7b440273) -----
>     i2c_adapter: /module/i2c_core
>           tuner: /devices/pci0000:00/0000:00:0f.0/i2c-0/0-0061
>           tuner: /module/tuner
>        tveeprom: /devices/pci0000:00/0000:00:0f.0/i2c-0/0-0050
>        tveeprom: /module/tveeprom
>       ide-cdrom: /module/ide_cd
>        ide-disk: /devices/pci0000:00/0000:00:11.1/ide0/0.0
>        ide-disk: /module/ide_disk
>  VIA 82xx Audio: /devices/pci0000:00/0000:00:11.5
>  VIA 82xx Audio: /module/snd_via82xx
>         VIA_IDE: /devices/pci0000:00/0000:00:11.1
>         VIA_IDE: /module/via82cxxx
>     agpgart-via: /devices/pci0000:00/0000:00:00.0
>     agpgart-via: /module/via_agp
>           bt878: /module/bt878
>            bttv: /devices/pci0000:00/0000:00:0f.0
>            bttv: /module/bttv
>        ehci_hcd: /devices/pci0000:00/0000:00:10.3
>        ehci_hcd: /module/ehci_hcd
>        ne2k-pci: /devices/pci0000:00/0000:00:0d.0
>        ne2k-pci: /module/ne2k_pci
>          shpchp: /module/shpchp
>        uhci_hcd: /devices/pci0000:00/0000:00:10.0
>        uhci_hcd: /devices/pci0000:00/0000:00:10.1
>        uhci_hcd: /devices/pci0000:00/0000:00:10.2
>        uhci_hcd: /module/uhci_hcd
>        via-ircc: /module/via_ircc
>       via-rhine: /devices/pci0000:00/0000:00:12.0
>       via-rhine: /module/via_rhine
>     vt596_smbus: /module/i2c_viapro
>           i8042: /devices/platform/i8042
>          imacfb: /devices/platform/imacfb.0
>          pcspkr: /devices/platform/pcspkr
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 kbd: /devices/pnp0/00:0b
>           ns558: /devices/pnp0/00:0c
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:02
>          system: /devices/pnp0/00:03
>          system: /devices/pnp0/00:0d
>           atkbd: /devices/platform/i8042/serio1
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
>          usbhid: /module/usbhid
>           usblp: /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0
>           usblp: /module/usblp
>             usb: /devices/pci0000:00/0000:00:10.3/usb1/1-3
>             usb: /devices/pci0000:00/0000:00:10.1/usb3/3-2
>             usb: /devices/pci0000:00/0000:00:10.3/usb1
>             usb: /devices/pci0000:00/0000:00:10.0/usb2
>             usb: /devices/pci0000:00/0000:00:10.1/usb3
>             usb: /devices/pci0000:00/0000:00:10.2/usb4
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00001106d00003189sv00001043sd0000807Fbc06sc00i00"
>    class = 0x60000
>    vendor = 0x1106
>    device = 0x3189
>    subvendor = 0x1043
>    subdevice = 0x807f
>    irq = 0
>    res[0] = 0xf8000000 0xfbffffff 0x1208
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v00001106d0000B168sv00000000sd00000000bc06sc04i00"
>    class = 0x60400
>    vendor = 0x1106
>    device = 0xb168
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:0d.0, bus_id = 0000:00:0d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0d.0
>    modalias = "pci:v000010ECd00008029sv000010ECsd00008029bc02sc00i00"
>    class = 0x20000
>    vendor = 0x10ec
>    device = 0x8029
>    subvendor = 0x10ec
>    subdevice = 0x8029
>    irq = 193
>    res[0] = 0xb800 0xb81f 0x101
>    config[64]
>  pci device: name = 0000:00:0f.0, bus_id = 0000:00:0f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0f.0
>    modalias = "pci:v0000109Ed0000036Esv00006606sd0000217Dbc04sc00i00"
>    class = 0x40000
>    vendor = 0x109e
>    device = 0x36e
>    subvendor = 0x6606
>    subdevice = 0x217d
>    irq = 185
>    res[0] = 0xdf800000 0xdf800fff 0x1208
>    config[64]
>  pci device: name = 0000:00:0f.1, bus_id = 0000:00:0f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:0f.1
>    modalias = "pci:v0000109Ed00000878sv00006606sd0000217Dbc04sc80i00"
>    class = 0x48000
>    vendor = 0x109e
>    device = 0x878
>    subvendor = 0x6606
>    subdevice = 0x217d
>    irq = 185
>    res[0] = 0xdf000000 0xdf000fff 0x1208
>    config[64]
>  pci device: name = 0000:00:10.0, bus_id = 0000:00:10.0, bus = pci
>    path = /devices/pci0000:00/0000:00:10.0
>    modalias = "pci:v00001106d00003038sv00001043sd000080A1bc0Csc03i00"
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 169
>    res[4] = 0xb400 0xb41f 0x101
>    config[64]
>  pci device: name = 0000:00:10.1, bus_id = 0000:00:10.1, bus = pci
>    path = /devices/pci0000:00/0000:00:10.1
>    modalias = "pci:v00001106d00003038sv00001043sd000080A1bc0Csc03i00"
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 169
>    res[4] = 0xb000 0xb01f 0x101
>    config[64]
>  pci device: name = 0000:00:10.2, bus_id = 0000:00:10.2, bus = pci
>    path = /devices/pci0000:00/0000:00:10.2
>    modalias = "pci:v00001106d00003038sv00001043sd000080A1bc0Csc03i00"
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 169
>    res[4] = 0xa800 0xa81f 0x101
>    config[64]
>  pci device: name = 0000:00:10.3, bus_id = 0000:00:10.3, bus = pci
>    path = /devices/pci0000:00/0000:00:10.3
>    modalias = "pci:v00001106d00003104sv00001043sd000080A1bc0Csc03i20"
>    class = 0xc0320
>    vendor = 0x1106
>    device = 0x3104
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 169
>    res[0] = 0xdd800000 0xdd8000ff 0x200
>    config[64]
>  pci device: name = 0000:00:11.0, bus_id = 0000:00:11.0, bus = pci
>    path = /devices/pci0000:00/0000:00:11.0
>    modalias = "pci:v00001106d00003177sv00001043sd000080A1bc06sc01i00"
>    class = 0x60100
>    vendor = 0x1106
>    device = 0x3177
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:11.1, bus_id = 0000:00:11.1, bus = pci
>    path = /devices/pci0000:00/0000:00:11.1
>    modalias = "pci:v00001106d00000571sv00001043sd000080A1bc01sc01i8a"
>    class = 0x1018a
>    vendor = 0x1106
>    device = 0x571
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 255
>    res[4] = 0xa400 0xa40f 0x101
>    config[64]
>  pci device: name = 0000:00:11.5, bus_id = 0000:00:11.5, bus = pci
>    path = /devices/pci0000:00/0000:00:11.5
>    modalias = "pci:v00001106d00003059sv00001043sd000080A1bc04sc01i00"
>    class = 0x40100
>    vendor = 0x1106
>    device = 0x3059
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 201
>    res[0] = 0xe000 0xe0ff 0x101
>    config[64]
>  pci device: name = 0000:00:12.0, bus_id = 0000:00:12.0, bus = pci
>    path = /devices/pci0000:00/0000:00:12.0
>    modalias = "pci:v00001106d00003065sv00001043sd000080A1bc02sc00i00"
>    class = 0x20000
>    vendor = 0x1106
>    device = 0x3065
>    subvendor = 0x1043
>    subdevice = 0x80a1
>    irq = 177
>    res[0] = 0xa000 0xa0ff 0x101
>    res[1] = 0xdd000000 0xdd0000ff 0x200
>    config[64]
>  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>    modalias = "pci:v00001002d00004966sv0000174Bsd00007176bc03sc00i00"
>    class = 0x30000
>    vendor = 0x1002
>    device = 0x4966
>    subvendor = 0x174b
>    subdevice = 0x7176
>    irq = 11
>    res[0] = 0xf0000000 0xf7ffffff 0x1208
>    res[1] = 0xd800 0xd8ff 0x101
>    res[2] = 0xde800000 0xde80ffff 0x200
>    res[6] = 0xeffe0000 0xefffffff 0x7202
>    config[64]
>  pci device: name = 0000:01:00.1, bus_id = 0000:01:00.1, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.1
>    modalias = "pci:v00001002d0000496Esv0000174Bsd00007177bc03sc80i00"
>    class = 0x38000
>    vendor = 0x1002
>    device = 0x496e
>    subvendor = 0x174b
>    subdevice = 0x7177
>    irq = 0
>    res[0] = 0xe0000000 0xe7ffffff 0x1208
>    res[1] = 0xde000000 0xde00ffff 0x200
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1106:3189:1043:807f:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 0
>  addr0 f8000000, size 04000000
>  00: 06 11 89 31 06 00 30 22 00 00 00 06 00 00 00 00  "...1..0"........"
>  10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 7f 80  "............C..."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 02 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 1106:b168:0000:0000:00
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 06 11 68 b1 07 00 30 22 00 00 04 06 00 00 01 00  "..h...0"........"
>  10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 00 00  "................"
>  20: 00 de f0 de 00 e0 f0 f7 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 08 00  "................"
>
>bus 00, slot 0d, func 0, vend:dev:s_vend:s_dev:rev 10ec:8029:10ec:8029:00
>class 02, sub_class 00 prog_if 00, hdr 0, flags <>, irq 193
>  addr0 0000b800, size 00000020
>  00: ec 10 29 80 01 00 00 02 00 00 00 02 00 00 00 00  "..)............."
>  10: 01 b8 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 29 80  "..............)."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00  "................"
>
>bus 00, slot 0f, func 0, vend:dev:s_vend:s_dev:rev 109e:036e:6606:217d:02
>class 04, sub_class 00 prog_if 00, hdr 0, flags <>, irq 185
>  addr0 df800000, size 00001000
>  00: 9e 10 6e 03 06 00 80 02 02 00 00 04 00 20 80 00  "..n.......... .."
>  10: 08 00 80 df 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 66 7d 21  ".............f}!"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 10 28  "...............("
>
>bus 00, slot 0f, func 1, vend:dev:s_vend:s_dev:rev 109e:0878:6606:217d:02
>class 04, sub_class 80 prog_if 00, hdr 0, flags <>, irq 185
>  addr0 df000000, size 00001000
>  00: 9e 10 78 08 00 00 80 02 02 00 80 04 00 20 80 00  "..x.......... .."
>  10: 08 00 00 df 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 66 7d 21  ".............f}!"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 04 ff  "................"
>
>bus 00, slot 10, func 0, vend:dev:s_vend:s_dev:rev 1106:3038:1043:80a1:80
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 169
>  addr4 0000b400, size 00000020
>  00: 06 11 38 30 17 00 10 02 80 00 03 0c 08 20 80 00  "..80......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 b4 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 09 01 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 00, slot 10, func 1, vend:dev:s_vend:s_dev:rev 1106:3038:1043:80a1:80
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 169
>  addr4 0000b000, size 00000020
>  00: 06 11 38 30 17 00 10 02 80 00 03 0c 08 20 80 00  "..80......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 b0 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 09 02 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 00, slot 10, func 2, vend:dev:s_vend:s_dev:rev 1106:3038:1043:80a1:80
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 169
>  addr4 0000a800, size 00000020
>  00: 06 11 38 30 17 00 10 02 80 00 03 0c 08 20 80 00  "..80......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 a8 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 09 03 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 00, slot 10, func 3, vend:dev:s_vend:s_dev:rev 1106:3104:1043:80a1:82
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 169
>  addr0 dd800000, size 00000100
>  00: 06 11 04 31 17 00 10 02 82 20 03 0c 10 20 00 00  "...1..... ... .."
>  10: 00 00 80 dd 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 04 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 00, slot 11, func 0, vend:dev:s_vend:s_dev:rev 1106:3177:1043:80a1:00
>class 06, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 0
>  00: 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00  "..w1............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 00, slot 11, func 1, vend:dev:s_vend:s_dev:rev 1106:0571:1043:80a1:06
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <pm>, irq 255
>  addr4 0000a400, size 00000010
>  00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00  "..q.......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 a4 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 00, slot 11, func 5, vend:dev:s_vend:s_dev:rev 1106:3059:1043:80a1:50
>class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 201
>  addr0 0000e000, size 00000100
>  00: 06 11 59 30 01 00 10 02 50 00 01 04 00 00 00 00  "..Y0....P......."
>  10: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 03 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 00, slot 12, func 0, vend:dev:s_vend:s_dev:rev 1106:3065:1043:80a1:74
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 177
>  addr0 0000a000, size 00000100
>  addr1 dd000000, size 00000100
>  00: 06 11 65 30 97 00 10 02 74 00 00 02 08 20 00 00  "..e0....t.... .."
>  10: 01 a0 00 00 00 00 00 dd 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a1 80  "............C..."
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 03 08  "....@..........."
>  40: 01 00  ".."
>
>bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1002:4966:174b:7176:01
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 11
>  addr0 f0000000, size 08000000
>  addr1 0000d800, size 00000100
>  addr2 de800000, size 00010000
>  00: 02 10 66 49 87 00 b0 02 01 00 00 03 08 40 80 00  "..fI.........@.."
>  10: 08 00 00 f0 01 d8 00 00 00 00 80 de 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 76 71  "............K.vq"
>  30: 00 00 fe ef 58 00 00 00 00 00 00 00 0b 01 08 00  "....X..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00 00 00 00 00 00 00 02 50  ".........P"
>
>bus 01, slot 00, func 1, vend:dev:s_vend:s_dev:rev 1002:496e:174b:7177:01
>class 03, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 0
>  addr0 e0000000, size 08000000
>  addr1 de000000, size 00010000
>  00: 02 10 6e 49 84 00 b0 02 01 00 80 03 08 40 00 00  "..nI.........@.."
>  10: 08 00 00 e0 00 00 00 de 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 77 71  "............K.wq"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00  ".."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> pci.3: macio
>sysfs: no such bus: macio
>>> pci.3: vio
>sysfs: no such bus: vio
>>> monitor.1: ddc
>>> monitor.2: bios
>>> monitor.3: pci
>>> monitor.4: internal db
>>> monitor.5: prom
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0c01
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0a03
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0c02
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0c02
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0200
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0b00
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0800
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0c04
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0700
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0401
>  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
>    path = /devices/pnp0/00:0a
>    id = PNP 0501
>  pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
>    path = /devices/pnp0/00:0b
>    id = PNP 0303
>  pnp device: name = 00:0c, bus_id = 00:0c, bus = pnp
>    path = /devices/pnp0/00:0c
>    id = PNP b02f
>  pnp device: name = 00:0d, bus_id = 00:0d, bus = pnp
>    path = /devices/pnp0/00:0d
>    id = PNP 0c02
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 RTS|DTR
>  1: uart:unknown port:000002F8 irq:3
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:0 0x0200 - 0x0207 (0x08) "ns558-pnp"
>i/o:0 0x0290 - 0x0297 (0x08) "pnp 00:0d"
>i/o:0 0x0370 - 0x0375 (0x06) "pnp 00:0d"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0xa000 - 0xa0ff (0x100) "0000:00:12.0"
>i/o:0 0xa000 - 0xa0ff (0x100) "via-rhine"
>i/o:0 0xa400 - 0xa40f (0x10) "0000:00:11.1"
>i/o:1 0xa400 - 0xa407 (0x08) "ide0"
>i/o:1 0xa408 - 0xa40f (0x08) "ide1"
>i/o:0 0xa800 - 0xa81f (0x20) "0000:00:10.2"
>i/o:0 0xa800 - 0xa81f (0x20) "uhci_hcd"
>i/o:0 0xb000 - 0xb01f (0x20) "0000:00:10.1"
>i/o:0 0xb000 - 0xb01f (0x20) "uhci_hcd"
>i/o:0 0xb400 - 0xb41f (0x20) "0000:00:10.0"
>i/o:0 0xb400 - 0xb41f (0x20) "uhci_hcd"
>i/o:0 0xb800 - 0xb81f (0x20) "0000:00:0d.0"
>i/o:0 0xb800 - 0xb81f (0x20) "ne2k-pci"
>i/o:0 0xd000 - 0xdfff (0x1000) "PCI Bus #01"
>i/o:0 0xd800 - 0xd8ff (0x100) "0000:01:00.0"
>i/o:0 0xe000 - 0xe0ff (0x100) "0000:00:11.5"
>i/o:0 0xe000 - 0xe0ff (0x100) "VIA8233"
>i/o:0 0xe400 - 0xe47f (0x80) "0000:00:11.0"
>i/o:0 0xe400 - 0xe47f (0x80) "motherboard"
>i/o:0 0xe400 - 0xe403 (0x04) "ACPI PM1a_EVT_BLK"
>i/o:0 0xe404 - 0xe405 (0x02) "ACPI PM1a_CNT_BLK"
>i/o:0 0xe408 - 0xe40b (0x04) "ACPI PM_TMR"
>i/o:0 0xe420 - 0xe423 (0x04) "ACPI GPE0_BLK"
>i/o:0 0xe800 - 0xe80f (0x10) "0000:00:11.0"
>i/o:0 0xe800 - 0xe807 (0x08) "vt596_smbus"
>irq:1  0 (  3928163) "timer"
>irq:0  1 (    11922) "i8042"
>irq:1  4 (        3) "serial"
>irq:1  6 (       19) "floppy"
>irq:1  8 (        2) "rtc"
>irq:0  9 (        0) "acpi"
>irq:1 14 (   288169) "ide0"
>irq:0 169 (   119940) "ehci_hcd:usb1" "uhci_hcd:usb2" "uhci_hcd:usb3" "uhci_hcd:usb4"
>irq:0 177 (       29) "eth0"
>irq:0 185 (        8) "bttv0"
>irq:0 193 (   157782) "eth1"
>irq:0 201 (   263609) "VIA8233"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	1912
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x50889c0dc54d3273) -----
>     i2c_adapter: /module/i2c_core
>           tuner: /devices/pci0000:00/0000:00:0f.0/i2c-0/0-0061
>           tuner: /module/tuner
>        tveeprom: /devices/pci0000:00/0000:00:0f.0/i2c-0/0-0050
>        tveeprom: /module/tveeprom
>       ide-cdrom: /module/ide_cd
>        ide-disk: /devices/pci0000:00/0000:00:11.1/ide0/0.0
>        ide-disk: /module/ide_disk
>  VIA 82xx Audio: /devices/pci0000:00/0000:00:11.5
>  VIA 82xx Audio: /module/snd_via82xx
>         VIA_IDE: /devices/pci0000:00/0000:00:11.1
>         VIA_IDE: /module/via82cxxx
>     agpgart-via: /devices/pci0000:00/0000:00:00.0
>     agpgart-via: /module/via_agp
>           bt878: /module/bt878
>            bttv: /devices/pci0000:00/0000:00:0f.0
>            bttv: /module/bttv
>        ehci_hcd: /devices/pci0000:00/0000:00:10.3
>        ehci_hcd: /module/ehci_hcd
>        ne2k-pci: /devices/pci0000:00/0000:00:0d.0
>        ne2k-pci: /module/ne2k_pci
>      parport_pc: /module/parport_pc
>          shpchp: /module/shpchp
>        uhci_hcd: /devices/pci0000:00/0000:00:10.0
>        uhci_hcd: /devices/pci0000:00/0000:00:10.1
>        uhci_hcd: /devices/pci0000:00/0000:00:10.2
>        uhci_hcd: /module/uhci_hcd
>        via-ircc: /module/via_ircc
>       via-rhine: /devices/pci0000:00/0000:00:12.0
>       via-rhine: /module/via_rhine
>     vt596_smbus: /module/i2c_viapro
>           i8042: /devices/platform/i8042
>          imacfb: /devices/platform/imacfb.0
>          pcspkr: /devices/platform/pcspkr
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 kbd: /devices/pnp0/00:0b
>           ns558: /devices/pnp0/00:0c
>      parport_pc: /devices/pnp0/00:09
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:02
>          system: /devices/pnp0/00:03
>          system: /devices/pnp0/00:0d
>           atkbd: /devices/platform/i8042/serio1
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
>          usbhid: /module/usbhid
>           usblp: /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0
>           usblp: /module/usblp
>             usb: /devices/pci0000:00/0000:00:10.3/usb1/1-3
>             usb: /devices/pci0000:00/0000:00:10.1/usb3/3-2
>             usb: /devices/pci0000:00/0000:00:10.3/usb1
>             usb: /devices/pci0000:00/0000:00:10.0/usb2
>             usb: /devices/pci0000:00/0000:00:10.1/usb3
>             usb: /devices/pci0000:00/0000:00:10.2/usb4
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:	
>drive speed:	
>drive # of slots:
>Can close tray:	
>Can open tray:	
>Can lock tray:	
>Can change speed:
>Can select disk:
>Can read multisession:
>Can read MCN:	
>Reports media changed:
>Can play audio:	
>Can write CD-R:	
>Can write CD-RW:
>Can read DVD:	
>Can write DVD-R:
>Can write DVD-RAM:
>Can read MRW:	
>Can write MRW:	
>Can write RAM:	
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     3     0   80043264 hda
>     3     1   10490413 hda1
>     3     2    1052257 hda2
>     3     3   68493127 hda3
>----- /proc/partitions end -----
>disks:
>  hda
>partitions:
>  hda1
>  hda2
>  hda3
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:11.1/ide0/0.0
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 64
>    block device: bus = ide, bus_id = 0.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:11.1/ide0/0.0
>>> block.5: /dev/hda
>>> block.5.1: /dev/hda geo
>  dev = /dev/hda, fd = 3
>  open ok, fd = 3
>/dev/hda: ioctl(geo) ok
>/dev/hda: ioctl(block size) ok
>/dev/hda: ioctl(disk size) ok
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:10.3/usb1/1-3
>  usb dev: /devices/pci0000:00/0000:00:10.1/usb3/3-2
>  usb dev: /devices/pci0000:00/0000:00:10.3/usb1
>  usb dev: /devices/pci0000:00/0000:00:10.0/usb2
>  usb dev: /devices/pci0000:00/0000:00:10.1/usb3
>  usb dev: /devices/pci0000:00/0000:00:10.2/usb4
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:10.3/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.18-rc4-2-default ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:00:10.3"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = 1-3:1.0, bus_id = 1-3:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0
>    modalias = "usb:v03F0p2B17d0100dc00dsc00dp00ic07isc01ip02"
>    bInterfaceNumber = 0
>    bInterfaceClass = 7
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 1-3:1.0 @ /devices/pci0000:00/0000:00:10.3/usb1/1-3
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x03f0
>    idProduct = 0x2b17
>    manufacturer = "Hewlett-Packard"
>    product = "HP LaserJet 1020"
>    serial = "FN1A2YT"
>    bcdDevice = 0100
>    speed = "480"
>  usb device: name = 1-3, bus_id = 1-3, bus = usb
>    path = /devices/pci0000:00/0000:00:10.3/usb1/1-3
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:10.0/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.18-rc4-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:10.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:10.1/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.18-rc4-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:10.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-2:1.0, bus_id = 3-2:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
>    modalias = "usb:v045Ep0040d0300dc00dsc00dp00ic03isc01ip02"
>    bInterfaceNumber = 0
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 3-2:1.0 @ /devices/pci0000:00/0000:00:10.1/usb3/3-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x045e
>    idProduct = 0x0040
>    manufacturer = "Microsoft"
>    product = "Microsoft 3-Button Mouse with IntelliEye(TM)"
>    bcdDevice = 0300
>    speed = "1.5"
>  usb device: name = 3-2, bus_id = 3-2, bus = usb
>    path = /devices/pci0000:00/0000:00:10.1/usb3/3-2
>  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:10.2/usb4
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.18-rc4-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:10.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:10.3/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:10.0/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:10.1/usb3
>  usb device: name = usb4, bus_id = usb4, bus = usb
>    path = /devices/pci0000:00/0000:00:10.2/usb4
>>> usb.3.1: joydev mod
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/input0/event0
>    dev = 13:64
>    input device: bus = platform, bus_id = pcspkr driver = pcspkr
>      path = /devices/platform/pcspkr
>  input: name = event1, path = /class/input/input1/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event2, path = /class/input/input2/event2
>    dev = 13:66
>    input device: bus = pci, bus_id = 0000:00:0f.0 driver = bttv
>      path = /devices/pci0000:00/0000:00:0f.0
>  input: name = event3, path = /class/input/input3/event3
>    dev = 13:67
>    input device: bus = usb, bus_id = 3-2:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
>  input: name = mouse0, path = /class/input/input3/mouse0
>    dev = 13:32
>    input device: bus = usb, bus_id = 3-2:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
>>> usb.3.4: lp
>  usb: name = lp0, path = /class/usb/lp0
>    dev = 180:0
>    usb device: bus = usb, bus_id = 1-3:1.0 driver = usblp
>      path = /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0
>  usb/lp: bus = 1, dev_nr = 3
>  usb/lp: vend = 0x03f0, prod = 0x2b17
>  usb/lp: "MFG:Hewlett-Packard;MDL:HP LaserJet 1020;CMD:ACL;CLS:PRINTER;DES:HP LaserJet 1020;"
>  usb/lp: vend = Hewlett-Packard, prod = HP LaserJet 1020, descr = HP LaserJet 1020, serial = 
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 160086528
>  chs default: 158816/16/63
>  chs legacy: 1024/255/63
>  caps: fixed edd 
>  attached: #0 
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> modem.1: serial
>******  started child process 3541 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>******  stopped child process 3541 (120s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 3543 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>******  stopped child process 3543 (19s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  S: Sysfs=/class/input/input0
>  H: Handlers=kbd event0 
>  B: EV=40001
>  B: SND=6
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  S: Sysfs=/class/input/input1
>  H: Handlers=kbd event1 
>  B: EV=120013
>  B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
>  B: MSC=10
>  B: LED=7
>  
>  I: Bus=0001 Vendor=6606 Product=217d Version=0001
>  N: Name="bttv IR (card=34)"
>  P: Phys=pci-0000:00:0f.0/ir0
>  S: Sysfs=/class/input/input2
>  H: Handlers=kbd event2 
>  B: EV=100003
>  B: KEY=10afc336 2150a48 0 0 0 404 80010000 190 4801 1e0000 4400 100000 10000ffc
>  
>  I: Bus=0003 Vendor=045e Product=0040 Version=0300
>  N: Name="Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)"
>  P: Phys=usb-0000:00:10.1-2/input0
>  S: Sysfs=/class/input/input3
>  H: Handlers=mouse0 event3 
>  B: EV=7
>  B: KEY=70000 0 0 0 0 0 0 0 0
>  B: REL=103
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 000000040200000003802078f840d001feffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 1, name = bttv IR (card=34)
>  handlers = kbd event2
>  key = 10afc33602150a4800000000000000000000000000000404800100000000019000004801001e0000000044000010000010000ffc
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
>  handlers = mouse0 event3
>  key = 000700000000000000000000000000000000000000000000000000000000000000000000
>  rel = 00000103
>  mouse buttons = 3
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 6
>  model		: 6
>  model name	: AMD Athlon(TM) MP 1600+
>  stepping	: 2
>  cpu MHz		: 1393.325
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow ts
>  bogomips	: 2788.84
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>>> fb.1: read info
>fb: size 1024 x 768
>fb: timing 78.65 MHz, 59.95 kHz, 75.69 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:0e:a6:0d:0e:8d
>    net device: path = /devices/pci0000:00/0000:00:12.0
>    ethtool driver: via-rhine
>    ethtool    bus: 0000:00:12.0
>  net interface: name = eth1, classname = net, path = /class/net/eth1
>    type = 1
>    hw_addr = 00:50:bf:59:39:72
>    net device: path = /devices/pci0000:00/0000:00:0d.0
>    ethtool driver: ne2k-pci
>    ethtool    bus: 0000:00:0d.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: ethtool link state: 1
>  eth1: GLINK ethtool error: Operation not supported
>  lo: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>eth1: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>eth1: Sending PADI packet
>Timeout waiting for PADO packets
>>> wlan.1: detecting wlan features
>>> wlan.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/hda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE
>  S: disk/by-path/pci-0000:00:11.1-ide-0:0
>  S: disk/by-id/edd-int13_dev80
>  E: ID_TYPE=disk
>  E: ID_MODEL=Maxtor_6Y080L0
>  E: ID_SERIAL=Y2DWZGSE
>  E: ID_REVISION=YAR41BW0
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:11.1-ide-0:0
>  E: ID_EDD=int13_dev80
>  
>  P: /block/hda/hda1
>  N: hda1
>  S: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part1
>  S: disk/by-path/pci-0000:00:11.1-ide-0:0-part1
>  S: disk/by-uuid/41d3da95-0528-4239-90fc-408f8db8d543
>  S: disk/by-id/edd-int13_dev80-part1
>  E: ID_TYPE=disk
>  E: ID_MODEL=Maxtor_6Y080L0
>  E: ID_SERIAL=Y2DWZGSE
>  E: ID_REVISION=YAR41BW0
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:11.1-ide-0:0
>  E: ID_EDD=int13_dev80
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=reiserfs
>  E: ID_FS_VERSION=3.6
>  E: ID_FS_UUID=41d3da95-0528-4239-90fc-408f8db8d543
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda2
>  N: hda2
>  S: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part2
>  S: disk/by-path/pci-0000:00:11.1-ide-0:0-part2
>  S: disk/by-id/edd-int13_dev80-part2
>  E: ID_TYPE=disk
>  E: ID_MODEL=Maxtor_6Y080L0
>  E: ID_SERIAL=Y2DWZGSE
>  E: ID_REVISION=YAR41BW0
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:11.1-ide-0:0
>  E: ID_EDD=int13_dev80
>  E: ID_FS_USAGE=other
>  E: ID_FS_TYPE=swap
>  E: ID_FS_VERSION=2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda3
>  N: hda3
>  S: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part3
>  S: disk/by-path/pci-0000:00:11.1-ide-0:0-part3
>  S: disk/by-uuid/0f040428-b352-4938-8625-3537d5cda27a
>  S: disk/by-id/edd-int13_dev80-part3
>  E: ID_TYPE=disk
>  E: ID_MODEL=Maxtor_6Y080L0
>  E: ID_SERIAL=Y2DWZGSE
>  E: ID_REVISION=YAR41BW0
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:11.1-ide-0:0
>  E: ID_EDD=int13_dev80
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=reiserfs
>  E: ID_FS_VERSION=3.6
>  E: ID_FS_UUID=0f040428-b352-4938-8625-3537d5cda27a
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /class/input/input0/event0
>  N: input/event0
>  S: input/by-path/platform-pcspkr-event-
>  E: ID_PATH=platform-pcspkr
>  
>  P: /class/input/input1/event1
>  N: input/event1
>  S: input/by-path/platform-i8042-serio-1-event-
>  E: ID_PATH=platform-i8042-serio-1
>  
>  P: /class/input/input2/event2
>  N: input/event2
>  S: input/by-path/pci-0000:00:0f.0--event-
>  E: ID_PATH=pci-0000:00:0f.0-
>  
>  P: /class/input/input3/event3
>  N: input/event3
>  S: input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-event-mouse
>  S: input/by-path/pci-0000:00:10.1-usb-0:2:1.0-event-mouse
>  E: ID_VENDOR=Microsoft
>  E: ID_MODEL=Microsoft_3-Button_Mouse_with_IntelliEye(TM)
>  E: ID_REVISION=0300
>  E: ID_SERIAL=Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye(TM)
>  E: ID_TYPE=hid
>  E: ID_BUS=usb
>  E: ID_CLASS=mouse
>  E: ID_PATH=pci-0000:00:10.1-usb-0:2:1.0
>  
>  P: /class/input/input3/mouse0
>  N: input/mouse0
>  S: input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-mouse
>  S: input/by-path/pci-0000:00:10.1-usb-0:2:1.0-mouse
>  E: ID_VENDOR=Microsoft
>  E: ID_MODEL=Microsoft_3-Button_Mouse_with_IntelliEye(TM)
>  E: ID_REVISION=0300
>  E: ID_SERIAL=Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye(TM)
>  E: ID_TYPE=hid
>  E: ID_BUS=usb
>  E: ID_CLASS=mouse
>  E: ID_PATH=pci-0000:00:10.1-usb-0:2:1.0
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/misc/device-mapper
>  N: device-mapper
>  S: mapper/control
>  
>  P: /class/sound/controlC0
>  N: snd/controlC0
>  
>  P: /class/sound/pcmC0D0c
>  N: snd/pcmC0D0c
>  
>  P: /class/sound/pcmC0D0p
>  N: snd/pcmC0D0p
>  
>  P: /class/sound/pcmC0D1c
>  N: snd/pcmC0D1c
>  
>  P: /class/sound/pcmC0D1p
>  N: snd/pcmC0D1p
>  
>  P: /class/sound/seq
>  N: snd/seq
>  
>  P: /class/sound/timer
>  N: snd/timer
>  
>  P: /class/usb/lp0
>  N: usb/lp0
>  S: usblp0
>  
>  P: /class/usb_device/usbdev1.1
>  N: bus/usb/001/001
>  
>  P: /class/usb_device/usbdev1.3
>  N: bus/usb/001/003
>  
>  P: /class/usb_device/usbdev2.1
>  N: bus/usb/002/001
>  
>  P: /class/usb_device/usbdev3.1
>  N: bus/usb/003/001
>  
>  P: /class/usb_device/usbdev3.2
>  N: bus/usb/003/002
>  
>  P: /class/usb_device/usbdev4.1
>  N: bus/usb/004/001
>  
>  P: /class/video4linux/radio0
>  N: radio0
>  S: radio
>  
>  P: /class/video4linux/vbi0
>  N: vbi0
>  S: vbi
>  
>  P: /class/video4linux/video0
>  N: video0
>  S: video
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE, disk/by-path/pci-0000:00:11.1-ide-0:0, disk/by-id/edd-int13_dev80
>/block/hda/hda1
>  name: hda1
>  links: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part1, disk/by-path/pci-0000:00:11.1-ide-0:0-part1, disk/by-uuid/41d3da95-0528-4239-90fc-408f8db8d543, disk/by-id/edd-int13_dev80-part1
>/block/hda/hda2
>  name: hda2
>  links: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part2, disk/by-path/pci-0000:00:11.1-ide-0:0-part2, disk/by-id/edd-int13_dev80-part2
>/block/hda/hda3
>  name: hda3
>  links: disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part3, disk/by-path/pci-0000:00:11.1-ide-0:0-part3, disk/by-uuid/0f040428-b352-4938-8625-3537d5cda27a, disk/by-id/edd-int13_dev80-part3
>/class/input/input0/event0
>  name: input/event0
>  links: input/by-path/platform-pcspkr-event-
>/class/input/input1/event1
>  name: input/event1
>  links: input/by-path/platform-i8042-serio-1-event-
>/class/input/input2/event2
>  name: input/event2
>  links: input/by-path/pci-0000:00:0f.0--event-
>/class/input/input3/event3
>  name: input/event3
>  links: input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-event-mouse, input/by-path/pci-0000:00:10.1-usb-0:2:1.0-event-mouse
>/class/input/input3/mouse0
>  name: input/mouse0
>  links: input/by-id/usb-Microsoft_Microsoft_3-Button_Mouse_with_IntelliEye_TM_-mouse, input/by-path/pci-0000:00:10.1-usb-0:2:1.0-mouse
>/class/input/mice
>  name: input/mice
>/class/misc/device-mapper
>  name: device-mapper
>  links: mapper/control
>/class/sound/controlC0
>  name: snd/controlC0
>/class/sound/pcmC0D0c
>  name: snd/pcmC0D0c
>/class/sound/pcmC0D0p
>  name: snd/pcmC0D0p
>/class/sound/pcmC0D1c
>  name: snd/pcmC0D1c
>/class/sound/pcmC0D1p
>  name: snd/pcmC0D1p
>/class/sound/seq
>  name: snd/seq
>/class/sound/timer
>  name: snd/timer
>/class/usb/lp0
>  name: usb/lp0
>  links: usblp0
>/class/usb_device/usbdev1.1
>  name: bus/usb/001/001
>/class/usb_device/usbdev1.3
>  name: bus/usb/001/003
>/class/usb_device/usbdev2.1
>  name: bus/usb/002/001
>/class/usb_device/usbdev3.1
>  name: bus/usb/003/001
>/class/usb_device/usbdev3.2
>  name: bus/usb/003/002
>/class/usb_device/usbdev4.1
>  name: bus/usb/004/001
>/class/video4linux/radio0
>  name: radio0
>  links: radio
>/class/video4linux/vbi0
>  name: vbi0
>  links: vbi
>/class/video4linux/video0
>  name: video0
>  links: video
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (ok)
>  prop read: rdCR.lZF+r4EgHp4 (ok)
>  prop read: rdCR.n_7QNeEnh23 (ok)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: YMnp.ecK7NLYWZ5D (failed)
>  old prop read: YMnp.ecK7NLYWZ5D (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3189 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_b168 (failed)
>  prop read: vSkL.i8os9252y4E (failed)
>  old prop read: vSkL.i8os9252y4E (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10ec_8029 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_109e_36e (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_109e_878 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038_1 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3104 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3177 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_571 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3059 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3065 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1002_4966 (failed)
>  prop read: VCu0.wr2IKR+O4T8 (failed)
>  old prop read: VCu0.wr2IKR+O4T8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1002_496e (failed)
>  prop read: NXNs.Zpcbh1eqBT0 (failed)
>  old prop read: NXNs.Zpcbh1eqBT0 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0a03 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_1 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0700 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0401 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0303 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNPb02f (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_41d3da95_0528_4239_90fc_408f8db8d543 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_part2_size_1077511680 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_0f040428_b352_4938_8625_3537d5cda27a (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0_printer_noserial (failed)
>  prop read: 2UT6.YU_k9Ob02i6 (failed)
>  old prop read: 2UT6.YU_k9Ob02i6 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_109e_36e_logicaldev_input (ok)
>  prop read: rdCR.j8NaKXDZtZ6 (ok)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_0e_a6_0d_0e_8d (ok)
>  prop read: /org/freedesktop/Hal/devices/net_00_50_bf_59_39_72 (ok)
>  prop read: ZsBS.GQNx7L4uPNA (ok)
>  prop read: wl2P.nfEXJulusj6 (ok)
>----- /proc/modules -----
>  lp 11588 0 - Live 0xd0871000
>  parport_pc 37348 1 - Live 0xd0f4f000
>  parport 34632 2 lp,parport_pc, Live 0xd0f6f000
>  joydev 9536 0 - Live 0xd0f01000
>  sg 32796 0 - Live 0xd0f65000
>  st 36508 0 - Live 0xd0f5b000
>  sd_mod 20496 0 - Live 0xd0f48000
>  sr_mod 15908 0 - Live 0xd0ec5000
>  scsi_mod 130568 4 sg,st,sd_mod,sr_mod, Live 0xd0ee0000
>  ide_cd 37920 0 - Live 0xd0ed5000
>  cdrom 34208 2 sr_mod,ide_cd, Live 0xd0ecb000
>  iptable_filter 3200 0 - Live 0xd0e84000
>  ip_tables 12488 1 iptable_filter, Live 0xd0eac000
>  x_tables 13828 1 ip_tables, Live 0xd0ea7000
>  usblp 13568 0 - Live 0xd0ea2000
>  binfmt_misc 10888 1 - Live 0xd0e8e000
>  ipv6 236256 16 - Live 0xd0f05000
>  snd_pcm_oss 48896 1 - Live 0xd0eb2000
>  snd_mixer_oss 17152 1 snd_pcm_oss, Live 0xd0e88000
>  snd_seq 53616 0 - Live 0xd0e93000
>  af_packet 20488 2 - Live 0xd2261000
>  asus_acpi 17180 0 - Live 0xd2254000
>  button 6928 0 - Live 0xd2228000
>  battery 10372 0 - Live 0xd2238000
>  ac 5380 0 - Live 0xd222b000
>  apparmor 53532 0 - Live 0xd2245000
>  aamatch_pcre 14464 1 apparmor, Live 0xd222e000
>  loop 15880 0 - Live 0xd1f71000
>  dm_mod 54840 0 - Live 0xd2070000
>  usbhid 44768 0 - Live 0xd20f7000
>  i2c_viapro 8340 0 - Live 0xd200e000
>  bt878 10920 0 - Live 0xd1f52000
>  tuner 57768 0 - Live 0xd2060000
>  snd_via82xx 28184 2 - Live 0xd2045000
>  snd_ac97_codec 91552 1 snd_via82xx, Live 0xd1ff6000
>  snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xd1fd8000
>  via_ircc 20500 0 - Live 0xd1fef000
>  snd_pcm 80136 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec, Live 0xd2030000
>  irda 113848 1 via_ircc, Live 0xd2013000
>  shpchp 35868 0 - Live 0xd1fe5000
>  pci_hotplug 30264 1 shpchp, Live 0xd1fc8000
>  snd_timer 22916 2 snd_seq,snd_pcm, Live 0xd1fd1000
>  ne2k_pci 11104 0 - Live 0xd1fc4000
>  8390 9472 1 ne2k_pci, Live 0xd1fc0000
>  snd_page_alloc 10504 2 snd_via82xx,snd_pcm, Live 0xd1fb3000
>  snd_mpu401_uart 8448 1 snd_via82xx, Live 0xd1faf000
>  snd_rawmidi 25216 1 snd_mpu401_uart, Live 0xd1fb8000
>  crc_ccitt 2304 1 irda, Live 0xd1f50000
>  via_agp 10112 1 - Live 0xd1f61000
>  snd_seq_device 8844 2 snd_seq,snd_rawmidi, Live 0xd1f5d000
>  agpgart 30896 1 via_agp, Live 0xd1f68000
>  snd 55556 12 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xd1fa0000
>  via_rhine 22532 0 - Live 0xd1f56000
>  bttv 164212 1 bt878, Live 0xd1f76000
>  video_buf 24452 1 bttv, Live 0xd1078000
>  firmware_class 9984 1 bttv, Live 0xd1f4a000
>  uhci_hcd 21772 0 - Live 0xd1f43000
>  ehci_hcd 29448 0 - Live 0xd1067000
>  ir_common 28036 1 bttv, Live 0xd1070000
>  compat_ioctl32 1536 1 bttv, Live 0xd104c000
>  i2c_algo_bit 8840 1 bttv, Live 0xd087c000
>  btcx_risc 5128 1 bttv, Live 0xd1036000
>  tveeprom 14480 1 bttv, Live 0xd1062000
>  mii 5632 1 via_rhine, Live 0xd102c000
>  soundcore 9440 2 snd, Live 0xd0875000
>  i2c_core 21008 5 i2c_viapro,tuner,bttv,i2c_algo_bit,tveeprom, Live 0xd105b000
>  usbcore 120580 5 usblp,usbhid,uhci_hcd,ehci_hcd, Live 0xd1f24000
>  videodev 22656 1 bttv, Live 0xd1054000
>  v4l1_compat 12420 1 videodev, Live 0xd1031000
>  v4l2_common 21120 3 tuner,bttv,videodev, Live 0xd1045000
>  ns558 4992 0 - Live 0xd0879000
>  gameport 14728 3 snd_via82xx,ns558, Live 0xd086c000
>  reiserfs 230016 2 - Live 0xd1e59000
>  edd 9924 0 - Live 0xd0850000
>  fan 4996 0 - Live 0xd081a000
>  via82cxxx 8836 0 [permanent], Live 0xd0847000
>  thermal 14600 0 - Live 0xd0842000
>  processor 25136 1 thermal, Live 0xd0822000
>  ide_disk 16384 4 - Live 0xd081d000
>  ide_core 123132 3 ide_cd,via82cxxx,ide_disk, Live 0xd1002000
>----- /proc/modules end -----
>  used irqs: 0,1,4,6,8,9,11,14,41,49,57,63
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.112]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (19 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.173]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Parallel Port 0: 0x378
>  Base Memory: 639 kB
>  PnP BIOS: PNP0C00
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xf1960
>  SMBIOS Version: 2.3
>  BIOS Info: #0
>    Vendor: "Award Software, Inc."
>    Version: "ASUS A7V8X-X ACPI BIOS Revision 1006"
>    Date: "08/06/2003"
>    Start Address: 0xf0000
>    ROM Size: 256 kB
>    Features: 0x0007000000007fcbde80
>      PCI supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      AGP supported
>  System Info: #1
>    Manufacturer: "System Manufacturer"
>    Product: "System Name"
>    Version: "System Version"
>    Serial: "SYS-1234567890"
>    UUID: undefined
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "ASUSTeK Computer INC."
>    Product: "A7V8X-X"
>    Version: "REV 1.xx"
>    Serial: "xxxxxxxxxxx"
>  Chassis Info: #3
>    Manufacturer: "Chassis Manufacture"
>    Version: "Chassis Version"
>    Serial: "Chassis Serial Number"
>    Asset Tag: "Asset-1234567890"
>    Type: 0x07 (Tower)
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x02 (Unknown)
>    OEM Info: 0x02000002
>  Processor Info: #4
>    Socket: "SOCKET A"
>    Socket Type: 0x01 (Other)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x01 (Other)
>    Manufacturer: "AuthenticAMD"
>    Version: "AMD Athlon(TM) MP 1600+"
>    Processor ID: 0x0383fbff00000662
>    Status: 0x01 (Enabled)
>    Voltage: 4.0 V
>    External Clock: 133 MHz
>    Max. Speed: 2250 MHz
>    Current Speed: 1400 MHz
>    L1 Cache: #9
>    L2 Cache: #10
>  Type 5 Record: #5
>    Data 00: 05 16 05 00 03 01 02 02 0a 1c 00 40 05 02 03 06
>    Data 10: 00 07 00 08 00 02
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 00 00 05 08 08 00
>    String 1: "DIMM 1"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 00 00 05 7f 7f 00
>    String 1: "DIMM 2"
>  Type 6 Record: #8
>    Data 00: 06 0c 08 00 01 45 00 00 05 7f 7f 00
>    String 1: "DIMM 3"
>  Cache Info: #9
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x04 (Data)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 128 kB
>    Current Size: 128 kB
>    Supported SRAM Types: 0x0030 (Pipeline Burst, Synchronous)
>    Current SRAM Type: 0x0030 (Pipeline Burst, Synchronous)
>  Cache Info: #10
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x04 (Data)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 8192 kB
>    Current Size: 256 kB
>    Supported SRAM Types: 0x0030 (Pipeline Burst, Synchronous)
>    Current SRAM Type: 0x0030 (Pipeline Burst, Synchronous)
>  Port Connector: #11
>    Internal Designator: "PRIMARY IDE/HDD"
>    Internal Connector: 0x16 (On Board IDE)
>  Port Connector: #12
>    Internal Designator: "SECONDARY IDE/HDD"
>    Internal Connector: 0x16 (On Board IDE)
>  Port Connector: #13
>    Internal Designator: "FLOPPY"
>    Internal Connector: 0x17 (On Board Floppy)
>  Port Connector: #14
>    Type: 0x10 (USB)
>    External Designator: "USB1"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #15
>    Type: 0x10 (USB)
>    External Designator: "USB2"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #16
>    Type: 0x10 (USB)
>    External Designator: "USB3"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #17
>    Type: 0x10 (USB)
>    External Designator: "USB4"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #18
>    Type: 0x10 (USB)
>    External Designator: "USB5"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #19
>    Type: 0x10 (USB)
>    External Designator: "USB6"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #20
>    Type: 0x0d (Keyboard Port)
>    External Designator: "PS/2 Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #21
>    Type: 0x0e (Mouse Port)
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #22
>    Type: 0x05 (Parallel Port ECP/EPP)
>    External Designator: "Parallel Port"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #23
>    Type: 0x08 (Serial Port 16550 Compatible)
>    External Designator: "Serial Port 1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #24
>    Type: 0x08 (Serial Port 16550 Compatible)
>    External Designator: "Serial Port 2"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #25
>    Type: 0x0c (Joy Stick Port)
>    External Designator: "Joystick Port"
>    External Connector: 0x07 (DB-15 pin female)
>  Port Connector: #26
>    Type: 0x0b (MIDI Port)
>    External Designator: "MIDI Port"
>    External Connector: 0x07 (DB-15 pin female)
>  Port Connector: #27
>    Type: 0x1d (Audio Port)
>    External Designator: "Line In Jack"
>    External Connector: 0x1f (Mini-jack [headphones])
>  Port Connector: #28
>    Type: 0x1f (Network Port)
>    External Designator: "LAN-000EA60D0E8D6"
>    External Connector: 0x0b (RJ-45)
>  System Slot: #29
>    Designation: "PCI 1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 1
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #30
>    Designation: "PCI 2"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x03 (Short)
>    Slot ID: 2
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #31
>    Designation: "PCI 3"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 3
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #32
>    Designation: "PCI 4"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x03 (Short)
>    Slot ID: 4
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #33
>    Designation: "PCI 5"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 5
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #34
>    Designation: "PCI 6"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 6
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #35
>    Designation: "AGP"
>    Type: 0x11 (AGP 4X)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x03 (Short)
>    Slot ID: 7
>    Characteristics: 0x0004 (3.3 V)
>  OEM Strings: #36
>    0
>    0
>  Language Info: #37
>    Languages: en|US|iso8859-1
>    Current: en|US|iso8859-1
>  Group Associations: #38
>    Group Name: "Cpu Module"
>    Items: #4, #9, #10
>  Group Associations: #39
>    Group Name: "Memory Module Set"
>    Items: #39, #40, #44, #41, #45, #42, #46, #43
>  Physical Memory Array: #40
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 3
>    Max. Size: 3 GB
>    ECC: 0x03 (None)
>  Memory Device: #41
>    Location: "DDR 1"
>    Memory Array: #40
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>  Memory Device: #42
>    Location: "DDR 2"
>    Memory Array: #40
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 0 bits
>    Size: No Memory Installed
>  Memory Device: #43
>    Location: "DDR 3"
>    Memory Array: #40
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 0 bits
>    Size: No Memory Installed
>  Memory Array Mapping: #44
>    Memory Array: #39
>    Partition Width: 2
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Memory Device Mapping: #45
>    Memory Device: #41
>    Array Mapping: #43
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Inactive Record: #46
>    Data 00: 7e 13 2e 00 00 00 04 00 ff ff 03 00 2a 00 2b 00
>    Data 10: 02 00 00
>  Inactive Record: #47
>    Data 00: 7e 13 2f 00 00 00 04 00 ff ff 03 00 2b 00 2b 00
>    Data 10: 03 00 00
>  Type 32 Record: #48
>    Data 00: 20 0b 30 00 00 00 00 00 00 00 00
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.59]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Formfactor: "desktop"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.192]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.206]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.219]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.230]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (3928163 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.241]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (2 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.251]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.262]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.304]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.61]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x0fffbfff (rw)
>  Memory Size: 256 MB
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>15: PCI(AGP) 00.0: 0600 Host bridge
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3189
>  Unique ID: qLht.TzIGd_qv8_F
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "ASUSTeK A7V8X motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3189 "VT8377 [KT400/KT600 AGP] Host Bridge"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x807f "A7V8X motherboard"
>  Driver: "agpgart-via"
>  Memory Range: 0xf8000000-0xfbffffff (rw,prefetchable)
>  Module Alias: "pci:v00001106d00003189sv00001043sd0000807Fbc06sc00i00"
>  Driver Info #0:
>    Driver Status: via_agp is active
>    Driver Activation Cmd: "modprobe via_agp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>16: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_b168
>  Unique ID: vSkL.i8os9252y4E
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "VIA VT8235 PCI Bridge"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0xb168 "VT8235 PCI Bridge"
>  Module Alias: "pci:v00001106d0000B168sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 0d.0: 0200 Ethernet controller
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_10ec_8029
>  Unique ID: JNkJ.GB4ZS2NjMdE
>  SysFS ID: /devices/pci0000:00/0000:00:0d.0
>  SysFS BusID: 0000:00:0d.0
>  Hardware Class: network
>  Model: "Realtek RTL-8029(AS)"
>  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
>  Device: pci 0x8029 "RTL-8029(AS)"
>  SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
>  SubDevice: pci 0x8029 "RTL-8029(AS)"
>  Driver: "ne2k-pci"
>  Device File: eth1
>  I/O Ports: 0xb800-0xb81f (rw)
>  IRQ: 193 (157782 events)
>  HW Address: 00:50:bf:59:39:72
>  Module Alias: "pci:v000010ECd00008029sv000010ECsd00008029bc02sc00i00"
>  Driver Info #0:
>    Driver Status: ne2k-pci is active
>    Driver Activation Cmd: "modprobe ne2k-pci"
>  Driver Info #1:
>    Driver Status: ne2k_pci is active
>    Driver Activation Cmd: "modprobe ne2k_pci"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>18: PCI 0f.0: 11200 TV Card
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_109e_36e
>  Unique ID: _+Pw.wlTYrAm4Az5
>  SysFS ID: /devices/pci0000:00/0000:00:0f.0
>  SysFS BusID: 0000:00:0f.0
>  Hardware Class: tv card
>  Model: "Brooktree Leadtek WinFast TV 2000"
>  Vendor: pci 0x109e "Brooktree Corporation"
>  Device: pci 0x036e "Bt878"
>  SubVendor: pci 0x6606 
>  SubDevice: pci 0x217d "Leadtek WinFast TV 2000"
>  Revision: 0x02
>  Driver: "bttv"
>  Memory Range: 0xdf800000-0xdf800fff (rw,prefetchable)
>  IRQ: 185 (8 events)
>  Module Alias: "pci:v0000109Ed0000036Esv00006606sd0000217Dbc04sc00i00"
>  Driver Info #0:
>    Driver Status: bttv is active
>    Driver Activation Cmd: "modprobe bttv"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>19: PCI 0f.1: 0480 Multimedia controller
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_109e_878
>  Unique ID: rKvl.w2ntEG4+w6F
>  SysFS ID: /devices/pci0000:00/0000:00:0f.1
>  SysFS BusID: 0000:00:0f.1
>  Hardware Class: unknown
>  Model: "Brooktree Bt878 Audio Capture"
>  Vendor: pci 0x109e "Brooktree Corporation"
>  Device: pci 0x0878 "Bt878 Audio Capture"
>  SubVendor: pci 0x6606 
>  SubDevice: pci 0x217d 
>  Revision: 0x02
>  Memory Range: 0xdf000000-0xdf000fff (rw,prefetchable,disabled)
>  IRQ: 185 (8 events)
>  Module Alias: "pci:v0000109Ed00000878sv00006606sd0000217Dbc04sc80i00"
>  Driver Info #0:
>    Driver Status: bt878 is active
>    Driver Activation Cmd: "modprobe bt878"
>  Driver Info #1:
>    Driver Status: btaudio is not active
>    Driver Activation Cmd: "modprobe btaudio"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>20: PCI 10.0: 0c03 USB Controller (UHCI)
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038_1
>  Unique ID: 37TO.EbaLH91RJ_1
>  SysFS ID: /devices/pci0000:00/0000:00:10.0
>  SysFS BusID: 0000:00:10.0
>  Hardware Class: usb controller
>  Model: "ASUSTeK A7V8X-X motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X motherboard"
>  Revision: 0x80
>  Driver: "uhci_hcd"
>  I/O Ports: 0xb400-0xb41f (rw)
>  IRQ: 169 (119940 events)
>  Module Alias: "pci:v00001106d00003038sv00001043sd000080A1bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>21: PCI 10.1: 0c03 USB Controller (UHCI)
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038_0
>  Unique ID: wRyD.EbaLH91RJ_1
>  SysFS ID: /devices/pci0000:00/0000:00:10.1
>  SysFS BusID: 0000:00:10.1
>  Hardware Class: usb controller
>  Model: "ASUSTeK A7V8X-X motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X motherboard"
>  Revision: 0x80
>  Driver: "uhci_hcd"
>  I/O Ports: 0xb000-0xb01f (rw)
>  IRQ: 169 (119940 events)
>  Module Alias: "pci:v00001106d00003038sv00001043sd000080A1bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>22: PCI 10.2: 0c03 USB Controller (UHCI)
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038
>  Unique ID: nmR3.EbaLH91RJ_1
>  SysFS ID: /devices/pci0000:00/0000:00:10.2
>  SysFS BusID: 0000:00:10.2
>  Hardware Class: usb controller
>  Model: "ASUSTeK A7V8X-X motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X motherboard"
>  Revision: 0x80
>  Driver: "uhci_hcd"
>  I/O Ports: 0xa800-0xa81f (rw)
>  IRQ: 169 (119940 events)
>  Module Alias: "pci:v00001106d00003038sv00001043sd000080A1bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>23: PCI 10.3: 0c03 USB Controller (EHCI)
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3104
>  Unique ID: f5xu.b4N+2oaaMM4
>  SysFS ID: /devices/pci0000:00/0000:00:10.3
>  SysFS BusID: 0000:00:10.3
>  Hardware Class: usb controller
>  Model: "ASUSTeK A7V8X-X motherboard rev 1.01"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3104 "USB 2.0"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X motherboard rev 1.01"
>  Revision: 0x82
>  Driver: "ehci_hcd"
>  Memory Range: 0xdd800000-0xdd8000ff (rw,non-prefetchable)
>  IRQ: 169 (119940 events)
>  Module Alias: "pci:v00001106d00003104sv00001043sd000080A1bc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>24: PCI 11.0: 0601 ISA bridge
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3177
>  Unique ID: 7EWs.Ejk8997IVy6
>  SysFS ID: /devices/pci0000:00/0000:00:11.0
>  SysFS BusID: 0000:00:11.0
>  Hardware Class: bridge
>  Model: "ASUSTeK A7V8X-X motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3177 "VT8235 ISA Bridge"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X motherboard"
>  Module Alias: "pci:v00001106d00003177sv00001043sd000080A1bc06sc01i00"
>  Driver Info #0:
>    Driver Status: via_ircc is active
>    Driver Activation Cmd: "modprobe via_ircc"
>  Driver Info #1:
>    Driver Status: i2c_viapro is active
>    Driver Activation Cmd: "modprobe i2c_viapro"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>25: PCI 11.1: 0101 IDE interface
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_571
>  Unique ID: +Y+h.7iuc1DH0mm9
>  SysFS ID: /devices/pci0000:00/0000:00:11.1
>  SysFS BusID: 0000:00:11.1
>  Hardware Class: storage
>  Model: "ASUSTeK A7V8X-X motherboard rev. 1.01"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x0571 "VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X motherboard rev. 1.01"
>  Revision: 0x06
>  Driver: "VIA_IDE"
>  I/O Ports: 0xa400-0xa40f (rw)
>  IRQ: 255 (no events)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  IRQ: 14 (288169 events)
>  Module Alias: "pci:v00001106d00000571sv00001043sd000080A1bc01sc01i8a"
>  Driver Info #0:
>    Driver Status: via82cxxx is active
>    Driver Activation Cmd: "modprobe via82cxxx"
>  Driver Info #1:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>26: PCI 11.5: 0401 Multimedia audio controller
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3059
>  Unique ID: Ssy1.LaYIBNkDBTE
>  SysFS ID: /devices/pci0000:00/0000:00:11.5
>  SysFS BusID: 0000:00:11.5
>  Hardware Class: sound
>  Model: "ASUSTeK A7V8X-X Motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3059 "VT8233/A/8235/8237 AC97 Audio Controller"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X Motherboard"
>  Revision: 0x50
>  Driver: "VIA 82xx Audio"
>  I/O Ports: 0xe000-0xe0ff (rw)
>  IRQ: 201 (263609 events)
>  Module Alias: "pci:v00001106d00003059sv00001043sd000080A1bc04sc01i00"
>  Driver Info #0:
>    Driver Status: via82cxxx_audio is not active
>    Driver Activation Cmd: "modprobe via82cxxx_audio"
>  Driver Info #1:
>    Driver Status: snd_via82xx is active
>    Driver Activation Cmd: "modprobe snd_via82xx"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>27: PCI 12.0: 0200 Ethernet controller
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3065
>  Unique ID: rBUF.YvjmuFHKWcB
>  SysFS ID: /devices/pci0000:00/0000:00:12.0
>  SysFS BusID: 0000:00:12.0
>  Hardware Class: network
>  Model: "ASUSTeK A7V8X-X Motherboard"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3065 "VT6102 [Rhine-II]"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x80a1 "A7V8X-X Motherboard"
>  Revision: 0x74
>  Driver: "via-rhine"
>  Device File: eth0
>  I/O Ports: 0xa000-0xa0ff (rw)
>  Memory Range: 0xdd000000-0xdd0000ff (rw,non-prefetchable)
>  IRQ: 177 (29 events)
>  HW Address: 00:0e:a6:0d:0e:8d
>  Link detected: yes
>  Module Alias: "pci:v00001106d00003065sv00001043sd000080A1bc02sc00i00"
>  Driver Info #0:
>    Driver Status: via-rhine is active
>    Driver Activation Cmd: "modprobe via-rhine"
>  Driver Info #1:
>    Driver Status: via_rhine is active
>    Driver Activation Cmd: "modprobe via_rhine"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>28: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1002_4966
>  Unique ID: VCu0.wr2IKR+O4T8
>  Parent ID: vSkL.i8os9252y4E
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>  SysFS BusID: 0000:01:00.0
>  Hardware Class: graphics card
>  Model: "PC Partner RV250 If [Sapphire Radeon 9000 Pro]"
>  Vendor: pci 0x1002 "ATI Technologies Inc"
>  Device: pci 0x4966 "RV250 If"
>  SubVendor: pci 0x174b "PC Partner Limited"
>  SubDevice: pci 0x7176 "RV250 If [Sapphire Radeon 9000 Pro]"
>  Revision: 0x01
>  Memory Range: 0xf0000000-0xf7ffffff (rw,prefetchable)
>  I/O Ports: 0xd800-0xd8ff (rw)
>  Memory Range: 0xde800000-0xde80ffff (rw,non-prefetchable)
>  Memory Range: 0xeffe0000-0xefffffff (ro,prefetchable,disabled)
>  IRQ: 11 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v00001002d00004966sv0000174Bsd00007176bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: radeon
>  Driver Info #1:
>    XFree86 v4 Server Module: radeon
>    3D Support: yes
>    Extensions: dri
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (PCI bridge)
>
>29: PCI 100.1: 0380 Display controller
>  [Created at pci.313]
>  UDI: /org/freedesktop/Hal/devices/pci_1002_496e
>  Unique ID: NXNs.Zpcbh1eqBT0
>  Parent ID: vSkL.i8os9252y4E
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1
>  SysFS BusID: 0000:01:00.1
>  Hardware Class: graphics card
>  Model: "PC Partner Radeon RV250 [Radeon 9000] (Secondary)"
>  Vendor: pci 0x1002 "ATI Technologies Inc"
>  Device: pci 0x496e "Radeon RV250 [Radeon 9000] (Secondary)"
>  SubVendor: pci 0x174b "PC Partner Limited"
>  SubDevice: pci 0x7177 
>  Revision: 0x01
>  Memory Range: 0xe0000000-0xe7ffffff (rw,prefetchable,disabled)
>  Memory Range: 0xde000000-0xde00ffff (rw,non-prefetchable,disabled)
>  Module Alias: "pci:v00001002d0000496Esv0000174Bsd00007177bc03sc80i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (PCI bridge)
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
>  Unique ID: z9pp.gNN83gfynbD
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c01 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0a03
>  Unique ID: QL3u.QBqTp8zQt87
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0a03 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_1
>  Unique ID: tWJy.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
>  Unique ID: KiZ0.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: ntp4.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: E349.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
>  Unique ID: hEKD.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: NhVi.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>38: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
>  Unique ID: qslm.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>39: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0401
>  Unique ID: H20r.YgT1Hy0M6x6
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0401 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>40: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
>  Unique ID: iT2w.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>41: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
>  Unique ID: 9fI_.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>42: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNPb02f
>  Unique ID: cqY2.SkuAEd7r8M4
>  SysFS ID: /devices/pnp0/00:0c
>  SysFS BusID: 00:0c
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0xb02f 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>43: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.148]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: 30p6.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:0d
>  SysFS BusID: 00:0d
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>44: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.74]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (3 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: IDE 00.0: 10600 Disk
>  [Created at block.195]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_Y2DWZGSE
>  Unique ID: l_yX.Cr9DjYytBTC
>  Parent ID: +Y+h.7iuc1DH0mm9
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:11.1/ide0/0.0
>  Hardware Class: disk
>  Model: "Maxtor 6Y080L0"
>  Vendor: "Maxtor"
>  Device: "6Y080L0"
>  Revision: "YAR41BW0"
>  Serial ID: "Y2DWZGSE"
>  Driver: "VIA_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE
>  Device Files: /dev/hda, /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE, /dev/disk/by-path/pci-0000:00:11.1-ide-0:0, /dev/disk/by-id/edd-int13_dev80
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Geometry (Logical): CHS 158816/16/63
>  Size: 160086528 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 158816/16/63
>  Size (BIOS EDD): 160086528 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #25 (IDE interface)
>
>46: None 00.0: 11300 Partition
>  [Created at block.364]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_41d3da95_0528_4239_90fc_408f8db8d543
>  Unique ID: 0fbI.SE1wIdpsiiC
>  Parent ID: l_yX.Cr9DjYytBTC
>  SysFS ID: /block/hda/hda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part1
>  Device Files: /dev/hda1, /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part1, /dev/disk/by-path/pci-0000:00:11.1-ide-0:0-part1, /dev/disk/by-uuid/41d3da95-0528-4239-90fc-408f8db8d543, /dev/disk/by-id/edd-int13_dev80-part1
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #45 (Disk)
>
>47: None 00.0: 11300 Partition
>  [Created at block.364]
>  UDI: /org/freedesktop/Hal/devices/volume_part2_size_1077511680
>  Unique ID: TqrM.SE1wIdpsiiC
>  Parent ID: l_yX.Cr9DjYytBTC
>  SysFS ID: /block/hda/hda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part2
>  Device Files: /dev/hda2, /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part2, /dev/disk/by-path/pci-0000:00:11.1-ide-0:0-part2, /dev/disk/by-id/edd-int13_dev80-part2
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #45 (Disk)
>
>48: None 00.0: 11300 Partition
>  [Created at block.364]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_0f040428_b352_4938_8625_3537d5cda27a
>  Unique ID: x+5R.SE1wIdpsiiC
>  Parent ID: l_yX.Cr9DjYytBTC
>  SysFS ID: /block/hda/hda3
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part3
>  Device Files: /dev/hda3, /dev/disk/by-id/ata-Maxtor_6Y080L0_Y2DWZGSE-part3, /dev/disk/by-path/pci-0000:00:11.1-ide-0:0-part3, /dev/disk/by-uuid/0f040428-b352-4938-8625-3537d5cda27a, /dev/disk/by-id/edd-int13_dev80-part3
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #45 (Disk)
>
>49: USB 00.0: 10a00 Hub
>  [Created at usb.125]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_3_if0
>  Unique ID: k4bc.dqzYckioNl4
>  Parent ID: f5xu.b4N+2oaaMM4
>  SysFS ID: /devices/pci0000:00/0000:00:10.3/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.18-rc4-2-default ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.18-rc4-2-default ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:10.3"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic09isc00ip00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #23 (USB Controller)
>
>50: USB 00.0: 10900 Printer
>  [Created at usb.125]
>  UDI: /org/freedesktop/Hal/devices/usb_device_3f0_2b17_FN1A2YT_if0_printer_noserial
>  Unique ID: 2UT6.YU_k9Ob02i6
>  Parent ID: k4bc.dqzYckioNl4
>  SysFS ID: /devices/pci0000:00/0000:00:10.3/usb1/1-3/1-3:1.0
>  SysFS BusID: 1-3:1.0
>  Hardware Class: printer
>  Model: "HP LaserJet 1020"
>  Hotplug: USB
>  Vendor: usb 0x03f0 "HP"
>  Device: usb 0x2b17 "HP LaserJet 1020"
>  SubVendor: "Hewlett-Packard"
>  SubDevice: "HP LaserJet 1020"
>  Revision: "1.00"
>  Serial ID: "FN1A2YT"
>  Driver: "usblp"
>  Device File: /dev/usb/lp0
>  Device Number: char 180:0
>  Speed: 480 Mbps
>  Module Alias: "usb:v03F0p2B17d0100dc00dsc00dp00ic07isc01ip02"
>  Driver Info #0:
>    Driver Status: usblp is active
>    Driver Activation Cmd: "modprobe usblp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #49 (Hub)
>
>51: USB 00.0: 10a00 Hub
>  [Created at usb.125]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_0_if0
>  Unique ID: pBe4.qGZiaTuJ703
>  Parent ID: 37TO.EbaLH91RJ_1
>  SysFS ID: /devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.18-rc4-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.18-rc4-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:10.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>52: USB 00.0: 10a00 Hub
>  [Created at usb.125]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_1_if0
>  Unique ID: uIhY.b+dHyDh14IA
>  Parent ID: wRyD.EbaLH91RJ_1
>  SysFS ID: /devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.18-rc4-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.18-rc4-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:10.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (USB Controller)
>
>53: USB 00.0: 10503 USB Mouse
>  [Created at usb.125]
>  UDI: /org/freedesktop/Hal/devices/usb_device_45e_40_noserial_if0
>  Unique ID: mZxt.sGFjMJXxze9
>  Parent ID: uIhY.b+dHyDh14IA
>  SysFS ID: /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
>  SysFS BusID: 3-2:1.0
>  Hardware Class: mouse
>  Model: "Microsoft Wheel Mouse Optical"
>  Hotplug: USB
>  Vendor: usb 0x045e "Microsoft Corp."
>  Device: usb 0x0040 "Wheel Mouse Optical"
>  Revision: "3.00"
>  Compatible to: int 0x0210 0x0013
>  Driver: "usbhid"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3
>  Device Number: char 13:63 (char 13:32)
>  Speed: 1.5 Mbps
>  Module Alias: "usb:v045Ep0040d0300dc00dsc00dp00ic03isc01ip02"
>  Driver Info #0:
>    Buttons: 3
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #52 (Hub)
>
>54: USB 00.0: 10a00 Hub
>  [Created at usb.125]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_10_2_if0
>  Unique ID: zPk0.MkisJ_Tl0a1
>  Parent ID: nmR3.EbaLH91RJ_1
>  SysFS ID: /devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0
>  SysFS BusID: 4-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.18-rc4-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.18-rc4-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:10.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #22 (USB Controller)
>
>55: PS/2 00.0: 10800 Keyboard
>  [Created at input.139]
>  UDI: /org/freedesktop/Hal/devices/platform_i8042_i8042_Kbd_Port_logicaldev_input
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>56: PS/2 00.0: 10800 Keyboard
>  [Created at input.139]
>  UDI: /org/freedesktop/Hal/devices/pci_109e_36e_logicaldev_input
>  Unique ID: hiS5.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "bttv IR (card=34)"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "bttv IR (card=34)"
>  Device File: /dev/input/event2
>  Device Number: char 13:66
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>57: None 00.0: 10103 CPU
>  [Created at cpu.292]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "AuthenticAMD"
>  Model: 6.6.2 "AMD Athlon(TM) MP 1600+"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse,syscall,mp,mmxext,3dnowext,3dnow,ts
>  Clock: 1393 MHz
>  Cache: 256 kb
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>58: None 00.0: 10000 Monitor
>  [Created at fb.71]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1024x768@76Hz
>  Driver Info #0:
>    Max. Resolution: 1024x768
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-61 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>59: None 00.0: 10701 Ethernet
>  [Created at net.119]
>  UDI: /org/freedesktop/Hal/devices/net_00_0e_a6_0d_0e_8d
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.YvjmuFHKWcB
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:12.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "via-rhine"
>  Device File: eth0
>  HW Address: 00:0e:a6:0d:0e:8d
>  Link detected: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #27 (Ethernet controller)
>
>60: None 01.0: 10701 Ethernet
>  [Created at net.119]
>  UDI: /org/freedesktop/Hal/devices/net_00_50_bf_59_39_72
>  Unique ID: L2Ua.ndpeucax6V1
>  Parent ID: JNkJ.GB4ZS2NjMdE
>  SysFS ID: /class/net/eth1
>  SysFS Device Link: /devices/pci0000:00/0000:00:0d.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "ne2k-pci"
>  Device File: eth1
>  HW Address: 00:50:bf:59:39:72
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #17 (Ethernet controller)
>
>61: None 00.0: 10700 Loopback
>  [Created at net.119]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>62: None 00.0: 10781 Network Interface
>  [Created at net.119]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=no, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 202903: 97633 | 97634 | 101433