Attachment 97794 Details for Bug 140238

dmesg just before module insertion. SUSE 10.1 on AMD Turion 64x2 with "apic=debug" boot parameter

dmesg_115 (text/plain), 20.70 KB, created by Arrigo Marchiori on 2006-09-03 16:27:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Arrigo Marchiori

Created: 2006-09-03 16:27:45 UTC

Size: 20.70 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/hda7    resume=/dev/hda6  splash=silent PROFILE=casa showopts apic=debug)
>Linux version 2.6.16.21-0.13-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon Jul 17 17:22:44 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037e90000 (usable)
> BIOS-e820: 0000000037e90000 - 0000000037e9a000 (ACPI data)
> BIOS-e820: 0000000037e9a000 - 0000000037f00000 (ACPI NVS)
> BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f80d0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x0000000037e920e5
>ACPI: FADT (v001 ATI    Bowfin   0x06040000 ATI  0x000f4240) @ 0x0000000037e99d7a
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x0000000037e99dee
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x0000000037e99f70
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x0000000037e99fc4
>ACPI: DSDT (v001    ATI    SB460 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 0000000037e90000
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-0000000037e90000
>On node 0 totalpages: 224850
>  DMA zone: 3012 pages, LIFO batch:0
>  DMA32 zone: 221838 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Checking aperture...
>CPU 0: aperture @ 39b4000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>Built 1 zonelists
>Kernel command line: root=/dev/hda7    resume=/dev/hda6  splash=silent PROFILE=casa showopts apic=debug
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>Disabling vsyscall due to use of PM timer
>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
>time.c: Detected 1596.043 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 895172k/916032k available (1876k kernel code, 20464k reserved, 868k data, 184k init)
>Calibrating delay using timer specific routine.. 3199.65 BogoMIPS (lpj=6399300)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0(2) -> Node 0 -> Core 0
>checking if image is initramfs... it is
>Freeing initrd memory: 2404k freed
> not found!
>enabled ExtINT on CPU#0
>ENABLING IO-APIC IRQs
>Synchronizing Arb IDs.
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Using local APIC timer interrupts.
>result 12469097
>Detected 12.469 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>masked ExtINT on CPU#1
>Calibrating delay using timer specific routine.. 3192.35 BogoMIPS (lpj=6384702)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1(2) -> Node 0 -> Core 1
>AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 456 cycles)
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>migration_cost=141
>DMI present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>PCI: No mmconfig possible on device 0:18
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
>ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>number of MP IRQ sources: 16.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>
>IO APIC #2......
>.... register #00: 02000000
>.......    : physical APIC id: 02
>.... register #01: 00178021
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 1
>.......     : IO APIC version: 0021
>.... register #02: 02000000
>.......     : arbitration: 02
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> 00 000 00  0    0    0   0   0    0    0    31
> 01 000 00  0    0    0   0   0    0    0    39
> 02 000 00  0    0    0   0   0    0    0    41
> 03 000 00  0    0    0   0   0    0    0    49
> 04 000 00  0    0    0   0   0    0    0    51
> 05 000 00  0    0    0   0   0    0    0    59
> 06 000 00  0    0    0   0   0    0    0    61
> 07 000 00  0    0    0   0   0    0    0    69
> 08 000 00  0    0    0   0   0    0    0    71
> 09 000 00  0    1    0   1   0    0    0    79
> 0a 000 00  0    0    0   0   0    0    0    81
> 0b 000 00  0    0    0   0   0    0    0    89
> 0c 000 00  0    0    0   0   0    0    0    91
> 0d 000 00  0    0    0   0   0    0    0    99
> 0e 000 00  0    0    0   0   0    0    0    A1
> 0f 000 00  0    0    0   0   0    0    0    A9
> 10 000 00  1    0    0   0   0    0    0    00
> 11 000 00  1    0    0   0   0    0    0    00
> 12 000 00  1    0    0   0   0    0    0    00
> 13 000 00  1    0    0   0   0    0    0    00
> 14 000 00  1    0    0   0   0    0    0    00
> 15 000 00  1    0    0   0   0    0    0    00
> 16 000 00  1    0    0   0   0    0    0    00
> 17 000 00  1    0    0   0   0    0    0    00
>Using vector-based indexing
>IRQ to pin mappings:
>IRQ0 -> 0:0
>IRQ1 -> 0:1
>IRQ2 -> 0:2
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>.................................... done.
>PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: c8000000-cfffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:04.0
>  IO window: 0000a400-0000a4ff
>  IO window: 0000a800-0000a8ff
>  PREFETCH window: 50000000-51ffffff
>  MEM window: 52000000-53ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-afff
>  MEM window: c0200000-c02fffff
>  PREFETCH window: 50000000-51ffffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>GSI 16 sharing vector 0xB1 and IRQ 16
>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 16 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 177
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1157305867.244:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[5a36:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>Allocate Port Service[0000:00:04.0:pcie03]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>pcie_portdrv_probe->Dev[5a37:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie01]
>Allocate Port Service[0000:00:05.0:pcie03]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: PC Speaker as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
> LID  PB3  PB4  PB5  PB6  PB7  BB4  BB5 OHC1 OHC2 EHCI  HDA KBC0 ELAN AUDO MODM 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 184k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>GSI 17 sharing vector 0xD1 and IRQ 17
>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd1 -> IRQ 17 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 209
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:DMA
>ATIIXP: simplex device: DMA disabled
>ide1: ATIIXP Bus-Master DMA disabled (BIOS)
>Probing IDE interface ide0...
>hda: HTS541010G9AT00, ATA DISK drive
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input3
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>hdb: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
>Probing IDE interface ide1...
>ACPI Exception (acpi_thermal-0415): AE_NOT_FOUND, Invalid active threshold [0] [20060127]
>ACPI: Thermal Zone [THRM] (0 C)
>Attempting manual resume
>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
>ReiserFS: hda7: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda7: checking transaction log (hda7)
>ReiserFS: hda7: Using r5 hash to sort names
>Adding 2104472k swap on /dev/hda6.  Priority:-1 extents:1 across:2104472k
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ndiswrapper: module not supported by Novell, setting U taint flag.
>ndiswrapper version 1.10 loaded (preempt=no,smp=yes)
>ndiswrapper (load_pe_images:573): fixing KI_USER_SHARED_DATA address in the driver
>ndiswrapper: driver net5211 (,07/08/2005,4.2.0.52) loaded
>GSI 18 sharing vector 0xD9 and IRQ 18
>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 18 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 217
>ndiswrapper: using irq 217
>ndiswrapper (ExAllocatePoolWithTag:1037): Windows driver allocating 205984 bytes in atomic context
>wlan0: vendor: ''
>wlan0: ndiswrapper ethernet device 00:16:ce:79:1b:04 using driver net5211, 168C:001A.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
>ndiswrapper (ExAllocatePoolWithTag:1037): Windows driver allocating 205984 bytes in atomic context
>wlan0 renamed to ath0
>hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
>fglrx: module not supported by Novell, setting U taint flag.
>[fglrx] Maximum main memory to use for locked dma buffers: 796 MBytes.
>[fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
>GSI 19 sharing vector 0xE1 and IRQ 19
>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xe1 -> IRQ 19 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 225
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 225, io mem 0xc0006000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16.21-0.13-smp ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>8139too Fast Ethernet driver 0.9.27
>GSI 20 sharing vector 0xE9 and IRQ 20
>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xe9 -> IRQ 20 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 233
>eth0: RealTek RTL8139 at 0xffffc2000005c000, 00:16:d4:13:7a:e5, IRQ 233
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 225
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 225, io mem 0xc0004000
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16.21-0.13-smp ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 225
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 225, io mem 0xc0005000
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16.21-0.13-smp ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>usb 1-4: new device found, idVendor=0402, idProduct=5602
>usb 1-4: new device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-4: Product: USB2.0 Camera
>usb 1-4: configuration #1 chosen from 1 choice
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>usb 2-4: new low speed USB device using ohci_hcd and address 2
>usb 2-4: new device found, idVendor=1267, idProduct=0210
>usb 2-4: new device strings: Mfr=0, Product=2, SerialNumber=0
>usb 2-4: Product: PS/2+USB Mouse
>usb 2-4: configuration #1 chosen from 1 choice
>usbcore: registered new driver hiddev
>input: PS/2+USB Mouse as /class/input/input4
>input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:13.0-4
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>loop: loaded (max 8 devices)
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1157298686.620:2): AppArmor (version 2.0-19.43r6320) initialized
>
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (3578 buckets, 28624 max) - 296 bytes per conntrack
>GSI 21 sharing vector 0x32 and IRQ 21
>IOAPIC[0]: Set PCI routing entry (2-17 -> 0x32 -> IRQ 21 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 50
>NET: Registered protocol family 17
>[fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option
>[fglrx] Maximum main memory to use for locked dma buffers: 796 MBytes.
>[fglrx] total      GART = 134217728
>[fglrx] free       GART = 118226944
>[fglrx] max single GART = 118226944
>[fglrx] total      LFB  = 127889408
>[fglrx] free       LFB  = 119697408
>[fglrx] max single LFB  = 119697408
>[fglrx] total      Inv  = 0
>[fglrx] free       Inv  = 0
>[fglrx] max single Inv  = 0
>[fglrx] total      TIM  = 0
>eth0: no IPv6 routers present
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13 (1075 mV)
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e (800 mV)
>cpu_init done, current fid 0x8, vid 0x13
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 50
>[fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option
>[fglrx] Maximum main memory to use for locked dma buffers: 796 MBytes.
>[fglrx] total      GART = 134217728
>[fglrx] free       GART = 118226944
>[fglrx] max single GART = 118226944
>[fglrx] total      LFB  = 127889408
>[fglrx] free       LFB  = 119697408
>[fglrx] max single LFB  = 119697408
>[fglrx] total      Inv  = 0
>[fglrx] free       Inv  = 0
>[fglrx] max single Inv  = 0
>[fglrx] total      TIM  = 0
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 209
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...

Actions: View

Attachments on bug 140238: 61435 | 61436 | 61437 | 63245 | 63246 | 65018 | 65019 | 97794 | 97829 | 97830 | 97836 | 97837