Bug 1215650

I recently upgraded my laptop from Leap 15.4 to 15.5. After that i can no longer assign USB devices to a guest system. I tried my iPhone and a USB memory stick. Both fail in the same way: the device doesn’t get checked in the devices list and after the try i can still see the device on the host system. Nothing happens on the guest system.

Here a snap of the hosts /var/log/messages file when i try to assign a USB stick to a Linux guest (both host and guest run Leap 15.5)

# tail -f /var/log/messages
 ...
2023-09-23T09:55:59.014798+02:00 manta (udev-worker)[27379]: sdc2: Failed to remove '/dev/disk/by-label/openSUSE-Leap-15.5-DVD-x86_64491', ignoring: No such file or directory
2023-09-23T09:55:59.015379+02:00 manta (udev-worker)[27379]: sdc2: Failed to remove/update device symlink '/dev/disk/by-label/openSUSE-Leap-15.5-DVD-x86_64491', ignoring: No such file or directory
2023-09-23T09:55:59.017472+02:00 manta (udev-worker)[27375]: sdc: Failed to remove '/dev/disk/by-label/openSUSE-Leap-15.5-DVD-x86_64491', ignoring: No such file or directory
2023-09-23T09:55:59.017762+02:00 manta (udev-worker)[27375]: sdc: Failed to remove/update device symlink '/dev/disk/by-label/openSUSE-Leap-15.5-DVD-x86_64491', ignoring: No such file or directory
2023-09-23T09:55:59.035741+02:00 manta plasmashell[9051]: file:///usr/lib64/qt5/qml/org/kde/plasma/extras/ExpandableListItem.qml:291: TypeError: Cannot read property 'enabled' of null
2023-09-23T09:55:59.084244+02:00 manta (udev-worker)[27376]: 2-2:1.0: Process '/usr/lib/snapd/snap-device-helper unbind snap_gphoto2_gphoto2 /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0 0:0' failed with exit code 1.
2023-09-23T09:55:59.355692+02:00 manta kernel: [ 9144.202807][T26553] usb 2-2: reset high-speed USB device number 6 using xhci_hcd
2023-09-23T09:55:59.503697+02:00 manta kernel: [ 9144.350736][T26553] usb 2-2: device firmware changed
2023-09-23T09:55:59.503715+02:00 manta kernel: [ 9144.351324][T26381] usb 2-2: USB disconnect, device number 6
2023-09-23T09:55:59.506665+02:00 manta (udev-worker)[27375]: 2-2: Process '/usr/lib/snapd/snap-device-helper unbind snap_gphoto2_gphoto2 /devices/pci0000:00/0000:00:14.0/usb2/2-2 189:133' failed with exit code 1.
2023-09-23T09:55:59.631785+02:00 manta kernel: [ 9144.478762][T26381] usb 2-2: new high-speed USB device number 7 using xhci_hcd
2023-09-23T09:55:59.779698+02:00 manta kernel: [ 9144.627349][T26381] usb 2-2: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.26
2023-09-23T09:55:59.779716+02:00 manta kernel: [ 9144.627363][T26381] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
2023-09-23T09:55:59.779720+02:00 manta kernel: [ 9144.627375][T26381] usb 2-2: Product: Cruzer Glide
2023-09-23T09:55:59.779721+02:00 manta kernel: [ 9144.627376][T26381] usb 2-2: Manufacturer: SanDisk
2023-09-23T09:55:59.779722+02:00 manta kernel: [ 9144.627378][T26381] usb 2-2: SerialNumber: 200443175302E8B38D30
2023-09-23T09:55:59.779723+02:00 manta kernel: [ 9144.627884][T26381] usb-storage 2-2:1.0: USB Mass Storage device detected
2023-09-23T09:55:59.779723+02:00 manta kernel: [ 9144.628014][T26381] scsi host7: usb-storage 2-2:1.0
2023-09-23T09:55:59.785256+02:00 manta mtp-probe: checking bus 2, device 7: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2"
2023-09-23T09:55:59.785325+02:00 manta mtp-probe: bus: 2, device: 7 was not an MTP device
2023-09-23T09:56:00.357797+02:00 manta (udev-worker)[27375]: 2-2:1.0: Process '/usr/lib/snapd/snap-device-helper bind snap_gphoto2_gphoto2 /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0 0:0' failed with exit code 1.
2023-09-23T09:56:00.361927+02:00 manta mtp-probe: checking bus 2, device 7: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2"
2023-09-23T09:56:00.362017+02:00 manta mtp-probe: bus: 2, device: 7 was not an MTP device
2023-09-23T09:56:00.363648+02:00 manta (udev-worker)[27375]: 2-2: Process '/usr/lib/snapd/snap-device-helper bind snap_gphoto2_gphoto2 /devices/pci0000:00/0000:00:14.0/usb2/2-2 189:134' failed with exit code 1.
2023-09-23T09:56:00.787706+02:00 manta kernel: [ 9145.636254][T20707] scsi 7:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.26 PQ: 0 ANSI: 6
2023-09-23T09:56:00.787722+02:00 manta kernel: [ 9145.636681][T20707] sd 7:0:0:0: Attached scsi generic sg4 type 0
2023-09-23T09:56:00.787724+02:00 manta kernel: [ 9145.637578][T27235] sd 7:0:0:0: [sdc] 125031680 512-byte logical blocks: (64.0 GB/59.6 GiB)
2023-09-23T09:56:00.787725+02:00 manta kernel: [ 9145.638313][T27235] sd 7:0:0:0: [sdc] Write Protect is off
2023-09-23T09:56:00.787727+02:00 manta kernel: [ 9145.638320][T27235] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
2023-09-23T09:56:00.787728+02:00 manta kernel: [ 9145.638624][T27235] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2023-09-23T09:56:00.799707+02:00 manta kernel: [ 9145.647196][T27235]  sdc: sdc1 sdc2
2023-09-23T09:56:00.799725+02:00 manta kernel: [ 9145.647495][T27235] sd 7:0:0:0: [sdc] Attached SCSI removable disk
2023-09-23T09:56:01.017020+02:00 manta dbus-daemon[1176]: [system] Activating service name='org.kde.kded.smart' requested by ':1.34' (uid=1000 pid=2807 comm="/usr/bin/kded5 ") (using servicehelper)
2023-09-23T09:56:01.042388+02:00 manta dbus-daemon[1176]: [system] Successfully activated service 'org.kde.kded.smart'

# lsusb
  ...
Bus 002 Device 007: ID 0781:5575 SanDisk Corp. Cruzer Glide
  ...

# rpm -qa | grep -i virtualbox
virtualbox-kmp-default-7.0.10_k5.14.21_150500.55.7-lp155.2.5.1.x86_64
virtualbox-7.0.10-lp155.2.5.1.x86_64
virtualbox-qt-7.0.10-lp155.2.5.1.x86_64

On the guest i have:

# rpm -qa | grep -i virtualbox
virtualbox-kmp-default-7.0.10_k5.14.21_150500.55.7-lp155.2.5.1.x86_64
virtualbox-guest-tools-7.0.10-lp155.2.5.1.x86_64
virtualbox-kmp-default-7.0.8_k5.14.21_150500.53-lp155.1.6.x86_64

Likely unrelated problem i also have after the upgrade, but i’ll just mention it: KDE can not shutdown my laptop. Instead it reboots it. I can power it off with ‘systemctl poweroff’ though.


--------------------

In forum https://forums.opensuse.org/t/virtualbox-7-0-1-on-leap-15-5-can-not-assign-usb-devices-to-guests/169319 larryr said:
    the 5.14.21-150500.55.22.1 kernel is bad use the 5.14.21-150500.55.19.1 kernel.
    Something got built wrong but got past QA.

Indeed going back to 5.14.21-150500.55.19.1  resolved my issue. larryr asked me to file a bug, so here it is....