Bug 149233

Using k3b all reading functions are functional until the burning process is to start. Then k3b hangs up (no possibility of closing k3b, even after abort burning cd). The only remedy is to restart at least the x-server. Bug description delivered by bug-report program of k3b:

K3b Version: 0.12

KDE Version: 3.4.2 Level "b" 
QT Version:  3.3.4
Kernel:      2.6.13-15-default
Devices
-----------------------
JLMS XJ-HD166S DIS3 (/dev/hdc, ) at /media/dvd [CD-Rom; DVD-Rom] [DVD-Rom; CD-Rom] [Keine]

CyberDrv CW088D CD-R/RW 110F (/dev/hdd, ) at /media/cdrecorder [CD-R; CD-RW; CD-Rom] [CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
Used versions
-----------------------
cdrecord: 2.1

cdrecord
-----------------------
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: Success. read buffer: scsi sendcmd: no error
CDB:  3C 00 00 00 00 00 00 FC 00 00
status: 0x4 (CONDITION MET/GOOD)
resid: 64512
cmd finished after 30.247s timeout 200s
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'CyberDrv'
Identifikation : 'CW088D CD-R/RW  '
Revision       : '110F'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A 
Profile: 0x0009 (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
FIFO size      : 4194304 = 4096 KB

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=48 -dao driveropts=burnfree -eject -data /tmp/kde-root/k3b_0.iso 



I don't know why derecord identifies my cd-burner as a scasi-drive while any scasi controller is installed on the computer.Using other programs all cd devices are usable. Please send some help, because I didn't found functional hints in several groups.

Thanks a lot!