Bug 581636

*** Bug 581637 has been marked as a duplicate of this bug. ***

*** Bug 581638 has been marked as a duplicate of this bug. ***

*** Bug 581639 has been marked as a duplicate of this bug. ***

*** Bug 581640 has been marked as a duplicate of this bug. ***

*** Bug 581641 has been marked as a duplicate of this bug. ***

*** Bug 581642 has been marked as a duplicate of this bug. ***

Created attachment 344267 [details]
Hardware Info from YaST for ASUS M51Ta notebook


Hardware Info from YaST for ASUS M51Ta notebook

System reports that there are two graphics adapters available, and this is correct  - built-in into chipset ATI 3200 and discrete ATI 3650


35: PCI 105.0: 0300 VGA compatible controller (VGA)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_1002_9612
  Unique ID: ul7N.s4pGC_xEJnE
  Parent ID: vSkL.2yY_xudKZ6E
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
  SysFS BusID: 0000:01:05.0
  Hardware Class: graphics card
  Model: "ATI Radeon HD 3200 Graphics"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x9612 "ATI Radeon HD 3200 Graphics"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1062
  Memory Range: 0xb0000000-0xbfffffff (rw,prefetchable)
  I/O Ports: 0xb000-0xbfff (rw)
  Memory Range: 0xfdcf0000-0xfdcfffff (rw,non-prefetchable)
  Memory Range: 0xfdb00000-0xfdbfffff (rw,non-prefetchable)
  IRQ: 10 (no events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v00001002d00009612sv00001043sd00001062bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: radeonhd
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #13 (PCI bridge)

36: PCI 200.0: 0300 VGA compatible controller (VGA)
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_1002_9591
  Unique ID: B35A.4vS9EIoIBE1
  Parent ID: _Znp.y+2dy+Jspc1
  SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: graphics card
  Model: "ATI Mobility Radeon HD 3650"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x9591 "Mobility Radeon HD 3650"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1872
  Memory Range: 0xc0000000-0xdfffffff (rw,prefetchable,disabled)
  I/O Ports: 0xc000-0xcfff (rw,disabled)
  Memory Range: 0xfddf0000-0xfddfffff (rw,non-prefetchable,disabled)
  Memory Range: 0xfddc0000-0xfdddffff (ro,prefetchable,disabled)
  IRQ: 10 (no events)
  Module Alias: "pci:v00001002d00009591sv00001043sd00001872bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: radeonhd
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #14 (PCI bridge)
 
I extracted this info after booting using Live CD (USB stick), without installing OpenSUSE 11.3 MS2.

Created attachment 344268 [details]
Xorg.0.log file from working system (loaded from Live CD)

Created attachment 345446 [details]
Hardware Information (YAST) from Virtual Box 3.1.4 virtual machine


It seems problem is not related to graphics adapter or system configuration of my notebook (ASUS M51Ta).

I just tried to install OpenSUSE 11.3 MS2 in virtual machine (VirtualBox 3.1.4 hosted in Windows Vista)

And I experienced same problem - Live CD boots, I install it to hard disk.
But system is not usable, doesn't boot to KDE after reboot.
I can only login via command line.

Just tried to install OpenSUSE 11.2 in VirtualBox on same computer, different VM.
It works fine, I was able to complete installation to HDD from KDE LiveCD session.

Therefor, it seems OpenSUSE 11.3 MS2 has regression comparing to 11.2

I would be happy to help to track it down to package level.
Please let me know what kind of additional information is required, if any.

The virtualbox issues could actually be bnc#584085 (VirtualBox kernel module vboxvideo causes oops on X start)

In the VM try removing /lib/modules/*/vboxvideo.ko and see if X starts; if it does, that is a duplicate of the above bug and different to this one.

Well, OpenSUSE 11.2 works fine inside VirtualBox 3.1.4

Just extracted from 11.2 system working in VirtualBox with Guest Additions how built-in Xorg.conf looks like:

---------------------------------------------------
#  X.Org X Server 1.6.5
#  Release Date: 2009-10-11
#  Build Operating System: openSUSE SUSE LINUX

	Section "Device"
		Identifier	"Builtin Default vboxvideo Device 0"
		Driver	"vboxvideo"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vboxvideo Screen 0"
		Device	"Builtin Default vboxvideo Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default vboxvideo Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
		Screen	"Builtin Default vesa Screen 0"
	EndSection
------------------------------------------------------------------

Mandriva 2010 uses generated config 
(X.Org X Server 1.6.5, Kernel 2.6.31.12 )
It is also running in VirtualBox 3.1.4 with Guest Additions

------------------------------------------------------------------
# File generated by XFdrake (rev )

Section "ServerFlags"
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section "Module"
    Disable "dri"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "glx" # 3D layer
EndSection

Section "InputDevice"
    Identifier "Mouse1"
    Driver "vboxmouse"
    Option "Device" "/dev/input/mice"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
    
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection

Section "Device"
    Identifier "device1"
    VendorName "InnoTek Systemberatung GmbH"
    BoardName "VirtualBox virtual video card"
    Driver "vboxvideo"
    Option "DPMS"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Mouse1" "CorePointer"
    Screen "screen1"
EndSection

-----------------------------------------------------

So it seems problem reported in this bug is caused either by auto-config in Xorg in OpenSUSE 11.3, or by Kernel 2.6.33

System doesn't start any mode after installation from KDE Live CD.
(build 0447 kde x86-64)
I selected  "Install now" and proceed with install, it doesn't start after reboot in graphics or text mode

System details:
See hwinfo from live cd boot

Reproducible: Always

Steps to Reproduce:
1. Boot from KDE LiveCD
2. Install system using "Install now"
3. Reboot
Actual Results:  
I get black scren after reboot.

I tried reboot -> init 3 - failed as well.

Created attachment 346943 [details]
hwinfo content -when using live cd

I faced the same problem while installing from the Gnome Live CD (Milestone 3). I have attached YaST logs here. The second part of installation, after reboot proceeds in text mode.

Created attachment 347003 [details]
YaST2 logs on installed system

Update to comment 14
I installed the DVD kde (Selected all the groups) from 
openSUSE-DVD-Build0475-x86_64.iso.
The result of the reboot after installation was that the reboot was successful after installation, and the screen looked ok. The system operates as normal.

It looks like after install 11.3M3 from KDE LiveCD YaST (or/and SuSEconfig) can't start to setup freshly installed system. We can use virtual console but nothing more.

My gfx card:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 4770 [RV740]

Vadim,Glenn :

If I understand correctly installation works for you but installed system won't boot up .. ( and you hit this issue on real hw and also in virtualbox )
just for sure check Milestone 3 - if isn't work for you ..

if not, we need messages or Xorg.0.log from system *where boot up fails*

so could you please attach /var/log/messages and /var/log/Xorg.0.log files ?

Michal,

Installation (to Hard disk drive) DOESN'T work
I have tried to insdtall 11.3 MS2 and MS3 on 4 different systems, and it failed on 3!
And yes - I retested all those systems with Milestone3.

For ASUS M51Ta I have posted /var/log/Xorg.0.log as Comment 8.
Note that it is from (working) live session.
Wehn I reboot, I just get command prompt. And I can't connect to internet or copy Xorg.0.log to USB flash - at least I don't know how to do it when system doesn't recognize USB stick, and now browser is available.

Can you please check other bugs I reported:

* KDE Live CD (Build0447) doesn't boot on Acer 6935G, screen corrupted
https://bugzilla.novell.com/show_bug.cgi?id=581635

* OpenSUSE 11.3 doesn't install, KDE Live session boots
https://bugzilla.novell.com/show_bug.cgi?id=582982

* OpenSUSE 11.3 MS3/KDE Live CD starts up to KDE4 Desktop, than system hangs, no response to mouse or keyboard
https://bugzilla.novell.com/show_bug.cgi?id=586157

May be, all those bugs are related to each other (Kernel? Xorg auto-config? video drivers?)

Michal,

For bug
* KDE Live CD (Build0447) doesn't boot on Acer 6935G, screen corrupted
https://bugzilla.novell.com/show_bug.cgi?id=581635

I have uploaded /var/log/Xorg.0.log as Comment 2 to that bug.
Direct link:
https://bugzilla.novell.com/attachment.cgi?id=346920

Differences between two systems:

ASUS M51Ta - AMD Turion CPU, ATI 3650+ATI 3200 graphics

Acer 6935 - Intel CPU, NVIDIA 9600GT graphics

Both systems are about 1 year old (12-14 months)

For bug
* OpenSUSE 11.3 MS3/KDE Live CD starts up to KDE4 Desktop, than system hangs,
no response to mouse or keyboard
https://bugzilla.novell.com/show_bug.cgi?id=586157

I even could not get OpenSUSE 11.3 MS3 booted.
But I loaded Fedora 12, and Xorg.0.log file is provided as attachment
I don't think Xorg.0.log file is too much different from OpenSUSE. :)

For this system (MSI S271 notebook, AMD CPU, built-in ATI video)
I also created Smolt profile:
http://www.smolts.org/client/show/pub_4f750c14-1590-481e-9d0a-24584ddc7a7c

It is 2 year old, so it's not modern but has resonable configuration.

Created attachment 349659 [details]
Xorg.0.log file from the real system where X fails.


Here is Xorg.0.log file from the real system (not VirtualBox) where X fails...

Originally reported as bug 581635
https://bugzilla.novell.com/show_bug.cgi?id=581635

I just installed [kvm virtual machine, 64-bit] OpenSUSE 11.3 Milestone 4 from the Gnome LiveCD and it installs but won't get me any graphics, just a blank screen. Using top on the host machine [OpenSUSE 11.2 64-bit] shows that qemu-kvm is sleeping, and takes little cpu and ram, as if the guest is waiting for something (dbus issue?). I'll keep the VM so I can maybe help somehow.

Created attachment 350828 [details]
YaST2 autoconfiguration without X

I tried M4 (i586) and problem still occures. Installation was completed but after reboot X couldn't start. I needed switch to tty1 [Alt+Ctrl+F1] to let YaST2 did autoconfiguration. After the next reboot, system is ready to "normal use". And now X starts without any problem, even 3D accel works fine.

Tested on notebook, Acer Aspire 5024 with radoen X700 GPU.

Answer and addition to comment 20 and comment 24:

Tried to boot OpenSUSE 11.3 Milestone 4 LiveCD in VMware Server 2.0.2 (hosted in Windows Vista).
It seems system reaches Runlevel 5, but screen is blank.
So it's similar to experience I have with couple of *real* systems, and similar to installation in KVM Virtual Machine Aioanei Rares did (comment 24).
 
Problems with installation in VirtualBox VM described in bug 
https://bugzilla.novell.com/show_bug.cgi?id=576681
seems have different cause.

I also tried to install OpenSUSE 11.2 KDE Live CD in VMware Server 2.0.2
Both boot-up of LiveCD and installation came smoothly. OpenSUSE 11.2 boots fine after installation, KDE is working.

Therefor, 11.3 Milestone4 has problems with installation in VMware, KVM and on some real systems (blank screen after reboot).
And it's regression comparing to OpenSUSE 11.2
Probably the most easy way to isolate this problem is to compare latest snapshot of 11.3 with 11.2 running either in VMware or KVM, as you will have access to identical/standard hardware.

Created attachment 351006 [details]
Last lines from TTY1 from boot of 11.3 MS4 GNOME LiveCD, before system hang


Just captured screen in VMware Server - last lines from Terminal 1 from boot of OpenSUSE 11.3 MS4 GNOME LiveCD, before system hangs.

May be, there are few last lines are missing - but I was trying to catch info before system switched to graphics mode.
It doesn't respond to keyboard after it.

It's visible that GDM was starting or preparing to start.

I see that the problem lies not (only) in X/gdm since I append '3' or 'single' to grub and I get the exact same thing. That is, a black screen and an unresponsive system.

I got a similar issue like this with MS5 KDE-LiveCD. Maybe bug 585432 is also related.

When the screen was black, I issued Ctrl+Alt+F2 and got to a red root prompt and could see with ps ax
[...kernel threads...]
 1039 tty1     S+     0:00 /bin/sh /usr/lib/YaST2/startup/YaST2.Second-Stage
 1388 ?        Sl     0:00 /sbin/rsyslogd -c 4 -f /etc/rsyslog.conf
 1489 ?        Ss     0:00 /bin/dbus-daemon --system
 1499 ?        Ss     0:00 /sbin/acpid
 1546 ?        Ssl    0:00 /usr/sbin/hald --daemon=yes
 1547 ?        S      0:00 hald-runner
 1576 ?        S      0:00 hald-addon-input: Listening on /dev/input/event0 /dev/input/event2
 1588 ?        S      0:00 hald-addon-storage: polling /dev/sr0 (every 2 sec)
 1590 ?        S      0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
 1614 tty2     Ss     0:00 bash
 1648 ?        Ssl    0:00 /usr/sbin/NetworkManager
 1651 ?        S      0:00 /usr/sbin/modem-manager
 1654 ?        S      0:00 /sbin/dhclient -d -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/dhclient-eth0.pid -lf /var/lib/dhcp/dhclient-3144e858-e9a6-4ad3-bc42-9c1cce02753a-eth0.lease -cf /var/run/nm-dhclient-eth0.conf eth0
 1655 ?        S      0:00 /usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log
 1802 tty1     S+     0:01 /bin/sh /usr/lib/YaST2/startup/YaST2.call installation continue
 1943 tty7     Ss+    0:00 Xorg -noreset -br -deferglyphs 16 vt07
 2791 ?        S      0:00 [flush-253:0]
 2857 tty1     S+     0:00 sleep 1


and could get further by issuing killall Xorg
which caused on tty1 a textual yast Second-Stage config to appear, telling me that "X was not installed or could not be started".

Reproduced this issue on OpenSUSE 11.3 MS5 Gnome-LiveCD.

The Graphic card is 
VGA compatible controller: ATI Technologies Inc RV610 [Radeon HD 2400 XT]

The /var/log/message shows it's a framebuffer error.

pr 15 11:07:08 linux kernel: [   38.765908] [drm] fb mappable at 0xC0141000
Apr 15 11:07:08 linux kernel: [   38.765910] [drm] vram apper at 0xC0000000
Apr 15 11:07:08 linux kernel: [   38.765911] [drm] size 3145728
Apr 15 11:07:08 linux kernel: [   38.765912] [drm] fb depth is 24
Apr 15 11:07:08 linux kernel: [   38.765913] [drm]    pitch is 4096
Apr 15 11:07:08 linux kernel: [   38.765917] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Apr 15 11:07:08 linux kernel: [   38.766064] Console: switching to colour dummy device 80x25
Apr 15 11:07:08 linux kernel: [   38.766827] Console: switching to colour frame buffer device 128x48
Apr 15 11:07:08 linux kernel: [   38.766843] fb0: radeondrmfb frame buffer device
Apr 15 11:07:08 linux kernel: [   38.766845] registered panic notifier
Apr 15 11:07:08 linux kernel: [   38.766850] [drm] Initialized radeon 2.1.0 20080528 for 0000:01:00.0 on minor 0
Apr 15 11:07:08 linux kernel: [   38.972809] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Apr 15 11:07:12 linux dns-resolver: ATTENTION: You have modified /etc/resolv.conf. Leaving it untouched...
Apr 15 11:07:12 linux dns-resolver: You can find my version in /etc/resolv.conf.netconfig
Apr 15 11:08:36 linux kernel: [  126.813415] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Apr 15 11:09:12 linux kernel: [  162.361614] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Apr 15 11:09:49 linux kernel: [  199.566009] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id

Created attachment 354532 [details]
message log of MS5 Gnome-liveCD error

Linux linux.site 2.6.34-rc3-3-desktop #1 SMP PREEMPT 2010-04-09 18:24:53 +0200 x86_64 x86_64 x86_64 GNU/Linux

01:00.0 VGA compatible controller: ATI Technologies Inc RV610 [Radeon HD 2400 XT]

I installed from 11.3 milestone 5 openSUSE-KDE-LiveCD-Build0556-x86_64.iso and get a blank screen on boot.
Will attach hwinfo detail.

Created attachment 354653 [details]
hwinfo detail

Has anyone reproduced this with MS6?

(In reply to comment #35)
> Has anyone reproduced this with MS6?

No, M6 was the first one that worked without this problem for me.

If there is no problem since 11.3M6, we close this bug