Bugzilla – Bug 104899
Suspend to disk (64-bit, does not even attempt resume)
Last modified: 2005-11-23 04:27:53 UTC
In my Athlon 64 msi K8T-neo Mobo with beta 1 64bit, the suspend to disk cannot recover. The sistem fails and start a new boot. boot.msg Inspecting /boot/System.map-2.6.13-rc5-git3-3-default Loaded 22888 symbols from /boot/System.map-2.6.13-rc5-git3-3-default. Symbols match kernel version 2.6.13. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Bootdata ok (command line is root=/dev/hda2 vga=0x31a selinux=0 splash=silent resume=/dev/hda1 splash=silent) <5>Linux version 2.6.13-rc5-git3-3-default (geeko@buildhost) (gcc version 4.0.2 20050802 (prerelease) (SUSE Linux)) #1 Fri Aug 5 14:06:24 UTC 2005 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) <4> BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) <4> BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) <4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) <7>ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f7570 <7>ACPI: RSDT (v001 A M I OEMRSDT 0x06000508 MSFT 0x00000097) @ 0x000000003ffc0000 <7>ACPI: FADT (v002 A M I OEMFACP 0x06000508 MSFT 0x00000097) @ 0x000000003ffc0200 <7>ACPI: MADT (v001 A M I OEMAPIC 0x06000508 MSFT 0x00000097) @ 0x000000003ffc0390 <7>ACPI: OEMB (v001 A M I AMI_OEM 0x06000508 MSFT 0x00000097) @ 0x000000003ffce040 <7>ACPI: DSDT (v001 1XXXX 1XXXX005 0x00000005 INTL 0x02002026) @ 0x0000000000000000 <7>On node 0 totalpages: 262080 <7> DMA zone: 4096 pages, LIFO batch:1 <7> Normal zone: 257984 pages, LIFO batch:31 <7> HighMem zone: 0 pages, LIFO batch:1 <6>ACPI: PM-Timer IO Port: 0x808 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <6>Processor #0 15:15 APIC version 16 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Setting APIC routing to flat <6>Using ACPI (MADT) for SMP configuration information <6>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) <4>Checking aperture... <4>CPU 0: aperture @ d0000000 size 128 MB <4>Built 1 zonelists <5>Kernel command line: root=/dev/hda2 vga=0x31a selinux=0 splash=silent resume=/dev/hda1 splash=silent <6>bootsplash: silent mode. <6>bootsplash: silent mode. <4>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 131072 bytes) <6>time.c: Using 3.579545 MHz PM timer. <6>time.c: Detected 1800.162 MHz processor. <6>time.c: Using PIT/TSC based timekeeping. <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Memory: 1023264k/1048320k available (2361k kernel code, 24444k reserved, 1230k data, 176k init) <4>Calibrating delay using timer specific routine.. 3608.63 BogoMIPS (lpj=7217276) <6>Security Framework v1.0.0 initialized <6>SELinux: Disabled at boot. <4>Mount-cache hash table entries: 256 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line) <6>mtrr: v2.0 (20020519) <4>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 <6>checking if image is initramfs... it is <6>ACPI: Looking for DSDT in initrd... not found! <4> not found! <4> tbxface-0120 [02] acpi_load_tables : ACPI Tables successfully acquired <4>Parsing all Control Methods:.................................................................................................................................................................... <4>Table [DSDT](id F004) - 602 Objects with 65 Devices 164 Methods 27 Regions <4>ACPI Namespace successfully loaded at root ffffffff804f4580 <4>evxfevnt-0096 [03] acpi_enable : Transition to ACPI mode successful <6>Using local APIC timer interrupts. <6>Detected 12.501 MHz APIC timer. <6>testing NMI watchdog ... OK. <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: Using configuration type 1 <6>ACPI: Subsystem revision 20050408 <4>evgpeblk-1016 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 <4>evgpeblk-1024 [06] ev_create_gpe_block : Found 5 Wake, Enabled 0 Runtime GPEs in this block <4>Completing Region/Field/Buffer/Package initialization:................................................................................................................ <4>Initialized 25/27 Regions 33/33 Fields 39/39 Buffers 15/16 Packages (611 nodes) <4>Executing all Device _STA and_INI methods:..................................................................... <4>69 Devices found containing: 69 _STA, 0 _INI methods <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <4>PCI: Probing PCI hardware (bus 00) <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 <7>Boot video device is 0000:01:00.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <3>PCI: Cannot allocate resource region 0 of device 0000:00:05.0 <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: fb000000-fbffffff <6> PREFETCH window: f8000000-f9ffffff <4>acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) <6>agpgart: Detected AGP bridge 0 <6>agpgart: AGP aperture is 128M @ 0xd0000000 <6>PCI-DMA: Disabling IOMMU. <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ <6>audit: initializing netlink socket (disabled) <4>audit(1124219570.156:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>vesafb: framebuffer at 0xf8000000, mapped to 0xffffc20000100000, using 10240k, total 32768k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104443 bytes,<6>...found (1280x1024, 54169 bytes, v3). <4>Console: switching to colour frame buffer device 158x59 <6>fb0: VESA VGA frame buffer device <6>Real Time Clock Driver v1.12 <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 3.38 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes) <4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 262144 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <4>ACPI wakeup devices: <4>PCI0 MC97 USB1 USB2 USB3 USB4 PCI1 PCI2 PCI3 PCI4 PCI5 ILAN SLPB <6>ACPI: (supports S0 S1 S3 S4 S5) <4>Freeing unused kernel memory: 176k freed <6>input: AT Translated Set 2 keyboard on isa0060/serio0 <5>SCSI subsystem initialized <6>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable <6>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 169 <6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <4> <Adaptec 29160 Ultra160 SCSI adapter> <4> aic7892: Ultra160 Wide Channel A, SCSI Id=0, 32/253 SCBs <4> <5> Vendor: EPSON Model: SCANNER GT-7600 Rev: 1.03 <5> Type: Processor ANSI SCSI revision: 02 <6> target0:0:2: asynchronous. <6> target0:0:2: Beginning Domain Validation <6> target0:0:2: Domain Validation skipping write tests <6> target0:0:2: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) <6> target0:0:2: Ending Domain Validation <7>libata version 1.11 loaded. <7>sata_via version 1.1 <4>acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable <6>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 177 <6>PCI: Via IRQ fixup for 0000:00:0f.0, from 3 to 1 <6>sata_via(0000:00:0f.0): routed to hard irq line 1 <6>ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 177 <6>ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 177 <6>ata1: no device found (phy stat 00000000) <6>scsi1 : sata_via <7>Losing some ticks... checking if CPU frequency changed. <6>ata2: no device found (phy stat 00000000) <6>scsi2 : sata_via <6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1 <4>acpi_bus-0212 [01] acpi_bus_set_power : Device is not power manageable <6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 177 <6>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 1 <6>VP_IDE: chipset revision 6 <6>VP_IDE: not 100% native mode: will probe irqs later <6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: ST380011A, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 1024KiB <6>hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) <6>hda: cache flushes supported <6> hda: hda1 hda2 <7>Probing IDE interface ide1... <4>hdc: BENQ DVD DD DW1625, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <4>Attempting manual resume <3>swsusp: Suspend partition has wrong signature? <5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal <5>ReiserFS: hda2: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: hda2: checking transaction log (hda2) <5>ReiserFS: hda2: Using r5 hash to sort names <5>ReiserFS: hda2: Removing [3835 276263 0x0 SD]..done <5>ReiserFS: hda2: Removing [4189 276262 0x0 SD]..done <5>ReiserFS: hda2: Removing [4189 276261 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 276237 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 276057 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 275825 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 275685 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 275395 0x0 SD]..done <5>ReiserFS: hda2: Removing [4189 275321 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 275284 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 275125 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 275042 0x0 SD]..done <5>ReiserFS: hda2: Removing [4181 274950 0x0 SD]..done <5>ReiserFS: hda2: Removing [3835 274898 0x0 SD]..done <5>ReiserFS: hda2: There were 14 uncompleted unlinks/truncates. Completed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Wed Aug 17 04:13:19 2005 Mounting shared memory FS on /dev/shmdone Configuring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A Configured serial ports doneActivating device mapper... Creating /dev/mapper/control character device with major:10 minor:63. done Checking file systems... fsck 1.38 (30-Jun-2005) doneSetting up kernel module dependencies (if required)done Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) nothing was mounted doneSetting up the CMOS clockdone <notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 UDEVD_EXPECTED_SEQNUM=852 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/udevd ] Cleaning up using /sbin/modify_resolvconf: restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd.eth0 done Starting udevd done Loading required kernel modules done<notice>killproc: kill(1986,29) Creating /var/log/boot.msg doneColdplug Coldplug: cleaning /events hwup: Loading module 'lp' for device 'printer' processing eventsdone Setting up hostname 'linux'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done Restore device permissionsdone Activating remaining swap-devices in /etc/fstab... doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone done Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(1986,3) INIT: Entering runlevel: 5 <notice> Boot logging started on /dev/tty1(/dev/console) at Tue Aug 16 19:13:30 2005 Master Resource Control: previous runlevel: N, switching to runlevel: 5 3801<notice>checkproc: /sbin/udevd 3794<notice>checkproc: /sbin/udevd 3793<notice>checkproc: /sbin/udevd 3729<notice>checkproc: /sbin/udevd 3728<notice>checkproc: /sbin/udevd 3727<notice>checkproc: /sbin/udevd 3726<notice>checkproc: /sbin/udevd 3725<notice>checkproc: /sbin/udevd 3724<notice>checkproc: /sbin/udevd 3723<notice>checkproc: /sbin/udevd 3722<notice>checkproc: /sbin/udevd 3721<notice>checkproc: /sbin/udevd 3720<notice>checkproc: /sbin/udevd 3719<notice>checkproc: /sbin/udevd 3718<notice>checkproc: /sbin/udevd 3717<notice>checkproc: /sbin/udevd 3712<notice>checkproc: /sbin/udevd 3711<notice>checkproc: /sbin/udevd 3649<notice>checkproc: /sbin/udevd 2217 checkproc: /sbin/udevd 3815<notice>checkproc: /sbin/udevd <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] Starting D-BUS daemondone <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Initializing random number generatordone <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone <notice>pidofproc: dhcpcd 4450 Loading keymap qwerty/us-acentos.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable doneSetting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) eth0 configuration: eth-id-00:11:09:86:e0:d6 eth0 (DHCP) . IP/Netmask: 192.168.0.198 / 255.255.255.0 ('linux') doneSetting up service network . . . . . . . . . . . . . . . .done <notice>checkproc: /sbin/dhcpcd 4553 <notice>checkproc: /sbin/dhcpcd 4553 <notice>startproc: execve (/usr/sbin/cannaserver) [ /usr/sbin/cannaserver -u wnn -r /var/lib/canna ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cannaserver ] <notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ] Starting mdnsddone <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ] <notice>startproc: execve (/opt/gnome/bin/netdaemon) [ /opt/gnome/bin/netdaemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/gnome/bin/netdaemon ] Starting RPC portmap daemondone Starting the netdaemondone Importing Net File System (NFS)unused Starting Canna Kanji Serverdone <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] Starting cupsddone <notice>startproc: execve (/usr/sbin/fam) [ /usr/sbin/fam -t 4 -T 0 -L ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/fam ] Starting File Access Monitoring Daemondone Checking/updating CPU microcodedone Starting nfsboot (sm-notify) done <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] acpid: loading ACPI modules (ac battery button fan processor thermal ) done Starting acpid done Starting mail service (Postfix)done Mount SMB/ CIFS File Systems unused <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting HAL daemondone <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_PAPER= LC_ADDRESS= LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= LC_TELEPHONE= INIT_VERSION=sysvinit-2.85 INIT=/sbin/init KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_IDENTIFICATION= LC_COLLATE= PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=pt_BR.UTF-8 LC_MEASUREMENT= PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE= splash=silent SPLASH=yes LC_TIME= ROOTFS_BLKDEV=/dev/hda2 LC_NAME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Starting service kdmdone <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] Starting powersaved (accessing ACPI events over acpid) done Starting service kdmdone Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: nfs smbfs <notice>killproc: kill(4152,3)
"swsusp: Suspend partition has wrong signature? " sounds bad. Pavel, this one looks like it's for you :)
Please don't inline such a long logs. Create attachments instead. Do you have some logs/screenshots of what happened during suspend?
Also interesting information would be if 32-bit kernel suspends/resumes on the same system.
Created attachment 47297 [details] Suspend to disk
Created attachment 47298 [details] boot after a recovery from disk error
Sorry, not helpfull. I really need the kernel logs from suspend. They are probably not on disk anywhere. Alternatively, try usual debugging techniques. (Latest vanilla kernel, suspend from single use mode, ...)
Idle for way too long...