Bugzilla – Bug 116706
Kernel:uhci_hcd: Unknown symbol
Last modified: 2005-09-15 16:48:23 UTC
Kernel:uhci_hcd: Unknown symbol usb_.... If usb is disabled the message disappears, but other is shown: ACPI-0768: *** Warning Threat 8FE could not acquire Mutex [<Null>] AE_BAD_PARAMETER shchp: acpi_shpchprm: get_device PCI ROOT HID fail=0x1001
Cool: "Unknown symbol usb_....". What is the reason you are stripping the most important piece of information? Sorry, but this whole bug report is totally useless.
(In reply to comment #1) > Cool: "Unknown symbol usb_....". What is the reason you are stripping the most > important piece of information? > Sorry, but this whole bug report is totally useless. Ok, here are the complete warnings (with acpid): Sep 15 17:18:00 linux100 kernel: shpchp: shpc_init : shpc_cap_offset == 0 Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_suspend Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_resume_root_hub Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_probe Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_check_bandwidth Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_disabled Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_release_bandwidth Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_claim_bandwidth Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_resume Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_giveback_urb Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_poll_rh_status Sep 15 17:18:00 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_remove Sep 15 17:18:00 linux100 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Sep 15 17:18:00 linux100 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 Sep 15 17:18:00 linux100 kernel: PCI: setting IRQ 5 as level-triggered Sep 15 17:18:00 linux100 kernel: ACPI-0212: *** Warning: Device is not power manageable And here are the warnigs without acpid: Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_suspend Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_resume_root_hub Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_probe Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_check_bandwidth Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_disabled Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_release_bandwidth Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_claim_bandwidth Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_resume Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_giveback_urb Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_poll_rh_status Sep 15 17:14:58 linux100 kernel: uhci_hcd: Unknown symbol usb_hcd_pci_remove Sep 15 17:14:58 linux100 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Sep 15 17:14:58 linux100 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 Sep 15 17:14:58 linux100 kernel: PCI: setting IRQ 5 as level-triggered Sep 15 17:14:58 linux100 kernel: shpchp: shpc_init : shpc_cap_offset == 0 Sep 15 17:14:58 linux100 kernel: ACPI-0212: *** Warning: Device is not power manageable dmesg gives the following output: Linux version 2.6.13-8-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Sep 6 12:59:22 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS) BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 495MB LOWMEM available. found SMP MP-table at 000f5230 On node 0 totalpages: 126960 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 122864 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Using APIC driver default ACPI: RSDP (v000 GBT ) @ 0x000f6c30 ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1eff3000 ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1eff3040 ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1eff7380 ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 1f000000 (gap: 1f000000:dfc00000) Built 1 zonelists Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 splash=native resume=/dev/hda1 showopts noapic Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 3015.180 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 496268k/507840k available (2329k kernel code, 10904k reserved, 750k data, 252k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6035.22 BogoMIPS (lpj=12070451) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled mtrr: v2.0 (20020519) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1675k freed ACPI: Looking for DSDT in initrd... not found! not found! ACPI: setting ELCR to 0200 (from 0e20) CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6029.48 BogoMIPS (lpj=12058967) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 Total of 2 processors activated (12064.70 BogoMIPS). checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb2e0, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: a000-afff MEM window: f8000000-f9ffffff PREFETCH window: 1f000000-1f0fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1126797263.872:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xf0000000, mapped to 0xdf880000, using 6144k, total 16192k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 ttyS2 at I/O 0xa000 (irq = 9) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Starting balanced_irq Using IPI No-Shortcut mode ACPI wakeup devices: SLPB PCI0 HUB0 USB0 USB1 USB2 USB3 USBE ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 252k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST3160023A, ATA DISK drive input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: Host Protected Area detected. current capacity is 312579695 sectors (160040 MB) native capacity is 312581808 sectors (160041 MB) hda: Host Protected Area disabled. hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 Probing IDE interface ide1... hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: CPU0 (power states: C1[C1]) ACPI: CPU1 (power states: C1[C1]) hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: Thermal Zone [THRM] (22 C) ACPI: Fan [FAN] (on) Attempting manual resume swsusp: Suspend partition has wrong signature? ReiserFS: hda2: found reiserfs format "3.6" with standard journal ReiserFS: hda2: using ordered data mode ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda2: checking transaction log (hda2) ReiserFS: hda2: Using r5 hash to sort names md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). usbcore: registered new driver usbfs usbcore: registered new driver hub uhci_hcd: Unknown symbol usb_hcd_pci_suspend uhci_hcd: Unknown symbol usb_hcd_resume_root_hub uhci_hcd: Unknown symbol usb_hcd_pci_probe uhci_hcd: Unknown symbol usb_check_bandwidth uhci_hcd: Unknown symbol usb_disabled uhci_hcd: Unknown symbol usb_release_bandwidth uhci_hcd: Unknown symbol usb_claim_bandwidth uhci_hcd: Unknown symbol usb_hcd_pci_resume uhci_hcd: Unknown symbol usb_hcd_giveback_urb uhci_hcd: Unknown symbol usb_hcd_poll_rh_status uhci_hcd: Unknown symbol usb_hcd_pci_remove USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000b000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hw_random hardware driver 1.0.0 loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000b400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000b800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Linux agpgart interface v0.101 (c) Dave Jones ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000bc00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected agpgart: Detected an Intel 865 Chipset. agpgart: Detected 16252K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI-0212: *** Warning: Device is not power manageable ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfa080000 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 54643 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 sk98lin: Network Device Driver v8.23.1.3 (C)Copyright 1999-2005 Marvell(R). ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled NET: Registered protocol family 10 Disabled Privacy Extensions on device c03ba0a0(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present ip_tables: (C) 2000-2002 Netfilter core team Mainboard is GigaByte GA-8IG1000-G, Chipset is Intel 865G I hope it help.
It seems that an additional serial card is the reason for the messages. Removing the card will not produce this messages. Serial Card is from Sunix, detected as : 01:03.0 Serial controller: Timedia Technology PCI2S550. Replaceing from Slot 2 to Slot 4 on the Mainboard is solving the problem.