Bugzilla – Bug 121817
AVM Fritzkard SL no network via USB
Last modified: 2005-10-29 19:54:46 UTC
I was not abel to create a lan connection with my AVM Fritz box SL using the USB-Port. With SuSE 9.3 works wery well. For configure i used YAST
Which version do you use OSS, download SL10 or box product ? The download versions do not contain any binary only drivers. The drivers are available in a seperate download from ftp://ftp.suse.com/pub/suse/i386/10.0/SUSE-Linux10.0-GM-Extra/suse/i586/ in the kernel-<type>-nongpl-<version>.i586.rpm
I use the evaluation cd set (e.g. SUSE-10.0-CD-i386-GM-CD1.iso) from the esslingen mirror. Thx for the hint! I will try it again using the GM-Extra repo. Regards
A temporary solution which worked for me with SUSE-10.0-EvalDVD-i386-GM.iso was: /etc/sysconfig/kernel: MODULES_LOADED_ON_BOOT="usbnet" + call SuSEconfig This worked without non-GPL.I can provide more info on request. Christian PS: error also happened with Fritz!Box WLAN lsusb -v: Bus 001 Device 003: ID 057c:3d00 AVM GmbH Fritz!Box Bus 001 Device 003: ID 057c:3d00 AVM GmbH Fritz!Box Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 Communications bDeviceSubClass 6 Ethernet Networking bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x057c AVM GmbH idProduct 0x3d00 Fritz!Box bcdDevice 1.00 iManufacturer 1 AVM iProduct 2 USB DSL Device iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 80 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 4 00040E2934E9 bmEthernetStatistics 0x00000000 wMaxSegmentSize 1514 wNumberMCFilters 0x0000 bNumberPowerFilters 0 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 250 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0
This is the output at /var/log/messages. I expect the problem come from the "2 function" of the interface. - CDROM with driver as content - CDC Ethernet interface. At 9.3 the CD-Rom had not been detected proper. 10.0 stops after the the CD is recognized. Only the manual load of usbnet "disconnects" the CD-part and activates the CDC-Ethernet. I expect 10.0 is failing, cause it detects the "usb" CD-ROM. I would be able to run a debug kernel if required/requested. Christian 10.0: Oct 23 12:28:49 cvathome kernel: uhci_hcd 0000:00:14.2: UHCI Host Controller Oct 23 12:28:49 cvathome kernel: uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1 Oct 23 12:28:49 cvathome kernel: uhci_hcd 0000:00:14.2: irq 11, io base 0x00002840 Oct 23 12:28:49 cvathome kernel: hub 1-0:1.0: USB hub found Oct 23 12:28:49 cvathome kernel: hub 1-0:1.0: 2 ports detected Oct 23 12:28:49 cvathome kernel: piix4_smbus 0000:00:14.3: Found 0000:00:14.3 device Oct 23 12:28:49 cvathome kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2 Oct 23 12:28:49 cvathome kernel: Device not ready. Make sure there is a disc in the drive. Oct 23 12:28:49 cvathome kernel: Device not ready. Make sure there is a disc in the drive. Oct 23 12:28:49 cvathome kernel: Initializing USB Mass Storage driver... Oct 23 12:28:49 cvathome kernel: scsi1 : SCSI emulation for USB Mass Storage devices Oct 23 12:28:49 cvathome kernel: usb-storage: device found at 2 Oct 23 12:28:49 cvathome kernel: usb-storage: waiting for device to settle before scanning Oct 23 12:28:49 cvathome kernel: usbcore: registered new driver usb-storage Oct 23 12:28:49 cvathome kernel: USB Mass Storage support registered. Oct 23 12:28:49 cvathome kernel: Vendor: AVM Model: FRITZ!Box CD-ROM Rev: 1.00 Oct 23 12:28:49 cvathome kernel: Type: CD-ROM ANSI SCSI revision: 00 Oct 23 12:28:49 cvathome kernel: sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray Oct 23 12:28:49 cvathome kernel: Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 Oct 23 12:28:49 cvathome kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5 Oct 23 12:28:49 cvathome kernel: usb-storage: device scan complete Oct 23 12:29:08 cvathome kernel: usb 1-1: USB disconnect, address 2 Oct 23 12:29:08 cvathome kernel: usb 1-1: new full speed USB device using uhci_hcd and address 3 Oct 23 12:29:09 cvathome kernel: eth1: register usbnet at usb-0000:00:14.2-1, CDC Ethernet Device, 00:04:0e:29:43:E9
Please open an other bug for AVM Fritz!Box, this device is very different and need no non GPL drivers. Fritz!Card SL USB only work with the binonly drivers. Does the install of the nongpl kernel fix the original problem ?
( Let's wait for the issuer of the bug. Summary: AVM Fritzkard SL no network via USB 1. comment: AVM Fritz box SL I expect it's related to Fritz!Box and not to Fritz!Card SL May be the summary needs to be changed. Christian )
For Fritz!Box * USB: I opened bug 131154 against kernel. ( kernel load of module and detection interface ) Best regards, Christian
*** This bug has been marked as a duplicate of 105621 ***