Bugzilla – Bug 121875
sues does not shutdown properly at all on intel915g/asrock/x86_64
Last modified: 2005-10-11 13:14:45 UTC
in the last 3 days having installed suse and rebooted over a dozen times, suse didn't managed to shut down properly even once. it hangs during shutdown, either with just a blinking cursor in the upper left or inmidst (when pressing esc) the shutdown process. please note that though i haven't tested it thorougly i believe the hang is more or less randomly in the shutdown process. the problem was also manifest in 10.1alpha, which i previously tested. (i reformatted the harddrive completely for suse 10.0) hardware used: celeron 336, asrock 915g-dual 775 mainboard with onboard graphics 915gv. system logs for *boot up* (note 'device is not power-managable') sorry if already posted, searched, but couldn't find it. Inspecting /boot/System.map-2.6.13-15-default Loaded 22770 symbols from /boot/System.map-2.6.13-15-default. Symbols match kernel version 2.6.13. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Bootdata ok (command line is root=/dev/sda2 vga=0x317 selinux=0 splash=silent) <5>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable) <4> BIOS-e820: 000000003f7b0000 - 000000003f7c0000 (ACPI data) <4> BIOS-e820: 000000003f7c0000 - 000000003f7f0000 (ACPI NVS) <4> BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) <7>ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f9580 <7>ACPI: RSDT (v001 A M I OEMRSDT 0x03000511 MSFT 0x00000097) @ 0x000000003f7b0000 <7>ACPI: FADT (v002 A M I OEMFACP 0x03000511 MSFT 0x00000097) @ 0x000000003f7b0200 <7>ACPI: MADT (v001 A M I OEMAPIC 0x03000511 MSFT 0x00000097) @ 0x000000003f7b0390 <7>ACPI: MCFG (v001 A M I OEMMCFG 0x03000511 MSFT 0x00000097) @ 0x000000003f7b03f0 <7>ACPI: OEMB (v001 A M I AMI_OEM 0x03000511 MSFT 0x00000097) @ 0x000000003f7c0040 <7>ACPI: DSDT (v001 7515L 7515L120 0x00000120 INTL 0x02002026) @ 0x0000000000000000 <7>On node 0 totalpages: 259919 <7> DMA zone: 3999 pages, LIFO batch:1 <7> Normal zone: 255920 pages, LIFO batch:31 <7> HighMem zone: 0 pages, LIFO batch:1 <6>ACPI: PM-Timer IO Port: 0x808 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <6>Processor #0 15:4 APIC version 16 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <6>Setting APIC routing to flat <6>Using ACPI (MADT) for SMP configuration information <6>Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) <4>Checking aperture... <4>Built 1 zonelists <5>Kernel command line: root=/dev/sda2 vga=0x317 selinux=0 splash=silent <6>bootsplash: silent mode. <4>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 131072 bytes) <6>time.c: Using 3.579545 MHz PM timer. <6>time.c: Detected 2683.155 MHz processor. <6>time.c: Using PIT/TSC based timekeeping. <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) <4>Memory: 1016828k/1040064k available (2290k kernel code, 22352k reserved, 825k data, 176k init) <4>Calibrating delay using timer specific routine.. 5374.57 BogoMIPS (lpj=10749140) <6>Security Framework v1.0.0 initialized <6>SELinux: Disabled at boot. <4>Mount-cache hash table entries: 256 <6>CPU: Trace cache: 12K uops, L1 D cache: 16K <6>CPU: L2 cache: 256K <4>using mwait in idle threads. <6>CPU0: Thermal monitoring enabled (TM1) <6>mtrr: v2.0 (20020519) <4>CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 01 <6>checking if image is initramfs... it is <6>ACPI: Looking for DSDT in initrd... not found! <4> not found! <6>Using local APIC timer interrupts. <6>Detected 7.985 MHz APIC timer. <6>testing NMI watchdog ... OK. <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: Using configuration type 1 <6>PCI: Using MMCONFIG at e0000000 <6>ACPI: Subsystem revision 20050408 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <4>PCI: Probing PCI hardware (bus 00) <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 <7>Boot video device is 0000:00:02.0 <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) <6>PCI-DMA: Disabling IOMMU. <4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: e000-efff <6> MEM window: feb00000-febfffff <6> PREFETCH window: disabled. <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ <6>audit: initializing netlink socket (disabled) <4>audit(1128867345.744:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 6144k, total 7872k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=4 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3). <4>Console: switching to colour frame buffer device 127x44 <6>fb0: VESA VGA frame buffer device <6>Real Time Clock Driver v1.12 <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>agpgart: Detected an Intel 915G Chipset. <6>agpgart: Detected 7932K stolen memory. <6>agpgart: AGP aperture is 256M @ 0xd0000000 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 3.38 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 6, 262144 bytes) <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <4>ACPI wakeup devices: <4>P0P2 P0P1 UAR1 EUSB MC97 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 <6>ACPI: (supports S0 S1 S3 S4 S5) <4>Freeing unused kernel memory: 176k freed <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <5>SCSI subsystem initialized <6>ICH6: IDE controller at PCI slot 0000:00:1f.1 <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169 <6>ICH6: chipset revision 5 <6>ICH6: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio <7>Probing IDE interface ide0... <4>hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <7>Probing IDE interface ide1... <7>libata version 1.12 loaded. <7>ata_piix version 1.04 <4> ACPI-0212: *** Warning: Device is not power manageable <6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177 <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>ata1: SATA max UDMA/133 cmd 0xC880 ctl 0xC802 bmdma 0xC080 irq 177 <6>ata2: SATA max UDMA/133 cmd 0xC480 ctl 0xC402 bmdma 0xC088 irq 177 <7>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:20ff <6>ata1: dev 0 ATA, max UDMA7, 390721968 sectors: lba48 <6>ata1: dev 0 configured for UDMA/133 <6>scsi0 : ata_piix <4>ATA: abnormal status 0x7F on port 0xC487 <3>ata2: disabling port <6>scsi1 : ata_piix <5> Vendor: ATA Model: SAMSUNG SP2004C Rev: VM10 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 sda3 sda4 <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <6>ACPI: CPU0 (power states: C1[C1]) <6>ACPI: Processor [CPU1] (supports 8 throttling states) <4> ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x2 <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 <5>ReiserFS: sda2: found reiserfs format "3.6" with standard journal <5>ReiserFS: sda2: using ordered data mode <5>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: sda2: checking transaction log (sda2) <5>ReiserFS: sda2: Using r5 hash to sort names <5>ReiserFS: sda2: Removing [4118 161998 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161997 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161991 0x0 SD]..done <5>ReiserFS: sda2: Removing [4119 161989 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161982 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161956 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161954 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161950 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161947 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161926 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161886 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161868 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161814 0x0 SD]..done <5>ReiserFS: sda2: Removing [4436 161811 0x0 SD]..done <5>ReiserFS: sda2: There were 14 uncompleted unlinks/truncates. Completed <6>bootsplash: status on console 0 changed to on <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com <6>NTFS driver 2.1.23 [Flags: R/W MODULE]. <6>NTFS volume version 3.1. <3>NTFS-fs error (device sda1): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows. Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Sun Oct 9 16:15:58 2005 Configuring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneMounting shared memory FS on /dev/shmdone Activating swap-devices in /etc/fstab... doneActivating device mapper... Creating /dev/mapper/control character device with major:10 minor:63. done Checking file systems... fsck 1.38 (30-Jun-2005) doneSetting up kernel module dependencies (if required)done Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) tmpfs on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sda3 on /mp3 type vfat (rw) /dev/sda1 on /win type ntfs (rw) doneSetting up the CMOS clockdone Cleaning up using /sbin/modify_resolvconf: restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd.eth0 done <notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon --stop-exec-queue ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 UDEVD_EVENT_TIMEOUT=1 LC_ALL=POSIX UDEVD_EXPECTED_SEQNUM=780 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/udevd ] Starting udevd done <notice>killproc: kill(1992,29) Creating /var/log/boot.msg doneSetting up hostname 'linux'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done done Loading required kernel modules doneRestore device permissionsdone Activating remaining swap-devices in /etc/fstab... doneColdplug Coldplug: cleaning /events hwup: Loading module 'lp' for device 'printer' processing eventsdone Starting Firewall Initialization (phase 1 of 2) Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done Enabling syn flood protectiondone Disabling IP forwardingdone Disabling IPv6 forwardingdone Disabling IPv6 privacydone done SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done done System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(1992,3) INIT: Entering runlevel: 5 Boot logging started on /dev/tty1(/dev/console) at Sun Oct 9 14:16:07 2005 Master Resource Control: previous runlevel: N, switching to runlevel: 5 <notice>checkproc: /sbin/udevd 4049<notice>checkproc: /sbin/udevd 4044<notice>checkproc: /sbin/udevd 4040<notice>checkproc: /sbin/udevd 4004<notice>checkproc: /sbin/udevd 3984<notice>checkproc: /sbin/udevd 3971<notice>checkproc: /sbin/udevd 3935<notice>checkproc: /sbin/udevd 3772<notice>checkproc: /sbin/udevd 3704<notice>checkproc: /sbin/udevd 2308 Starting D-BUS daemon<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] done Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/klogd ] done Loading keymap qwerty/us.map.gz doneInitializing random number generatordone <notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone Loading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable done<notice>pidofproc: dhcpcd 4830 Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth0 configuration: eth-id-00:13:8f:1d:0a:01 eth0 (DHCP) . IP/Netmask: 192.168.5.2 / 255.255.255.0 doneSetting up service network . . . . . . . . . . . . . . . .done <notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ] Starting mdnsddone <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/portmap ] Mount SMB/ CIFS File Systems unused Starting RPC portmap daemondone Starting nfsboot (sm-notify) done Importing Net File System (NFS)unused <notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/acpid ] acpid: loading ACPI modules ( ac battery button ) done Starting acpid done Checking/updating CPU microcodedone <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone <notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting mail service (Postfix)done <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting SSH daemondone Starting CRON daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting HAL daemondone <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Starting service kdmdone Starting service kdmdone <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting cupsddone Starting powersaved (accessing ACPI events over acpid) <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ] done done Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: smbfs nfs <notice>killproc: kill(3923,3)
could you try to boot with vga=normal 3 and then after login as root poweroff if you can see the last line on the screen?
done so, machine DOES poweroff without a hitch. (usual messages come umount etc.. is there anything special needed?) added just "vga=normal", so booting into kde, opened up a terminal, typed poweroff, and the machine hanged up again. this time after "umount SMB/CIFS". last time it was after disabling the ssh daemon.
ok, now i've realized that it's not really a bug, insofar as i even cannot log out of the current session and cannot restart the x-session by ctrl-alt-backspace. seems to be a problem with the x11-driver for the intel 915g. (though a severe one) this also explains the 'random' hang-ups at poweroff (if done via console while x11 is still there)-- the computer freezes as soon as the x11-server gets killed. still would be quite nice to have the gfx'card' working out-of-the-box.. (besides sax doesn't work proplery in this respect either, since restarting the x-server makes the computer freeze with the same symptom)
Stefan: is this a known problem or do you have a workaround for that?
You need to update your BIOS. See comment #34 of duplicate bugreport. *** This bug has been marked as a duplicate of 116338 ***
any idea how to proceed in case of an non-intel board, where i already have the latest (buggy) bios-patch?
You have a non-intel board with an Intel 915G onboard graphics chipset ???
i mean not assembled/produced by intel. (there are quite a lot of those around) as written above its an asrock 775Dual-915GL, i suppose i cannot natively use intel-bios to upgrade?