Bugzilla – Bug 121899
when i plug in my freecom 160gb usb 2.0 drive nothing happens, can't access it from suse and it's not in "my computer"
Last modified: 2006-05-15 09:23:42 UTC
it worked fine in 9.3 as soon as plugged in, but nothing comes up in 10.0 and i can't use my usb drive which is really bad as i have lots of important stuff i need on there. thus it's critical for me, if i can't get help or a fix for this i've lost a lot of important things i backed up.
please provide more information: plug the drive in and: hwinfo --disk fdisk -l lshal last ~200 lines of /var/log/messages /var/log/boot.msg
i typed each of the commands you gave me into super user mode konsole? is that what i was supposed to do? here's what i got: ----- hwinfo --disk ----- 22: IDE 00.0: 10600 Disk [Created at block.188] UDI: /org/freedesktop/Hal/devices/storage_serial_S013J10WB36015 Unique ID: l_yX.pT+IO2DTZs4 Parent ID: WL76.nVxm5QyYLE1 SysFS ID: /block/hda SysFS BusID: 0.0 SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.0 Hardware Class: disk Model: "SAMSUNG SP1604N" Vendor: "SAMSUNG" Device: "SP1604N" Revision: "TM100-23" Serial ID: "S013J10WB36015" Driver: "AMD_IDE", "ide-disk", "ide-disk" Device File: /dev/hda Device Files: /dev/hda, /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015, /dev/disk/by-path/pci-0000:00:09.0-ide-0:0 Device Number: block 3:0-3:63 BIOS id: 0x80 Geometry (Logical): CHS 19457/255/63 Size: 312581808 sectors a 512 bytes Geometry (BIOS EDD): CHS 310101/16/63 Size (BIOS EDD): 312581808 sectors Geometry (BIOS Legacy): CHS 1024/255/63 Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 23: IDE 01.0: 10600 Disk [Created at block.188] UDI: /org/freedesktop/Hal/devices/storage_serial_5GC0YPFW Unique ID: u0Ql.nIuVdwtgHf9 Parent ID: WL76.nVxm5QyYLE1 SysFS ID: /block/hdb SysFS BusID: 0.1 SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.1 Hardware Class: disk Model: "ST380020A" Device: "ST380020A" Revision: "3.39" Serial ID: "5GC0YPFW" Driver: "AMD_IDE", "ide-disk", "ide-disk" Device File: /dev/hdb Device Files: /dev/hdb, /dev/disk/by-id/ata-ST380020A_5GC0YPFW, /dev/disk/by-path/pci-0000:00:09.0-ide-0:1 Device Number: block 3:64-3:127 BIOS id: 0x81 Geometry (Logical): CHS 155061/16/63 Size: 156301488 sectors a 512 bytes Geometry (BIOS EDD): CHS 155061/16/63 Size (BIOS EDD): 156301488 sectors Geometry (BIOS Legacy): CHS 1024/255/63 Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 26: SCSI 3000.0: 10600 Disk [Created at block.188] Unique ID: n2I9.ZGmms3QDCAA Parent ID: ndC_.EehyuzDVk+7 SysFS ID: /block/sda SysFS BusID: 48:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host48/target48:0:0/48:0:0:0 Hardware Class: disk Model: "HDS72251 6VLAT20" Vendor: usb 0x07ab "HDS72251" Device: usb 0xfccd "6VLAT20" Revision: "V34O" Serial ID: "FW436_0B29140042F9AA27" Driver: "usb-storage", "sd" Device File: /dev/sda (/dev/sg0) Device Number: block 8:0-8:15 (char 21:0) Speed: 480 Mbps Module Alias: "usb:v07ABpFCCDd0436dc00dsc00dp00ic08isc06ip50" Driver Info #0: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller) ----- fdisk -l ----- 22: IDE 00.0: 10600 Disk [Created at block.188] UDI: /org/freedesktop/Hal/devices/storage_serial_S013J10WB36015 Unique ID: l_yX.pT+IO2DTZs4 Parent ID: WL76.nVxm5QyYLE1 SysFS ID: /block/hda SysFS BusID: 0.0 SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.0 Hardware Class: disk Model: "SAMSUNG SP1604N" Vendor: "SAMSUNG" Device: "SP1604N" Revision: "TM100-23" Serial ID: "S013J10WB36015" Driver: "AMD_IDE", "ide-disk", "ide-disk" Device File: /dev/hda Device Files: /dev/hda, /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015, /dev/disk/by-path/pci-0000:00:09.0-ide-0:0 Device Number: block 3:0-3:63 BIOS id: 0x80 Geometry (Logical): CHS 19457/255/63 Size: 312581808 sectors a 512 bytes Geometry (BIOS EDD): CHS 310101/16/63 Size (BIOS EDD): 312581808 sectors Geometry (BIOS Legacy): CHS 1024/255/63 Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 23: IDE 01.0: 10600 Disk [Created at block.188] UDI: /org/freedesktop/Hal/devices/storage_serial_5GC0YPFW Unique ID: u0Ql.nIuVdwtgHf9 Parent ID: WL76.nVxm5QyYLE1 SysFS ID: /block/hdb SysFS BusID: 0.1 SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.1 Hardware Class: disk Model: "ST380020A" Device: "ST380020A" Revision: "3.39" Serial ID: "5GC0YPFW" Driver: "AMD_IDE", "ide-disk", "ide-disk" Device File: /dev/hdb Device Files: /dev/hdb, /dev/disk/by-id/ata-ST380020A_5GC0YPFW, /dev/disk/by-path/pci-0000:00:09.0-ide-0:1 Device Number: block 3:64-3:127 BIOS id: 0x81 Geometry (Logical): CHS 155061/16/63 Size: 156301488 sectors a 512 bytes Geometry (BIOS EDD): CHS 155061/16/63 Size (BIOS EDD): 156301488 sectors Geometry (BIOS Legacy): CHS 1024/255/63 Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 26: SCSI 3000.0: 10600 Disk [Created at block.188] Unique ID: n2I9.ZGmms3QDCAA Parent ID: ndC_.EehyuzDVk+7 SysFS ID: /block/sda SysFS BusID: 48:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host48/target48:0:0/48:0:0:0 Hardware Class: disk Model: "HDS72251 6VLAT20" Vendor: usb 0x07ab "HDS72251" Device: usb 0xfccd "6VLAT20" Revision: "V34O" Serial ID: "FW436_0B29140042F9AA27" Driver: "usb-storage", "sd" Device File: /dev/sda (/dev/sg0) Device Number: block 8:0-8:15 (char 21:0) Speed: 480 Mbps Module Alias: "usb:v07ABpFCCDd0436dc00dsc00dp00ic08isc06ip50" Driver Info #0: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller) linux:~ # fdisk -l Disk /dev/hda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 121 971901 82 Linux swap / Solaris /dev/hda2 * 122 19456 155308387+ 83 Linux Disk /dev/hdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdb1 * 1 9729 78148161 7 HPFS/NTFS ----- lshal ----- usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 0 (0x0) (int) usb.product_id = 0 (0x0) (int) usb.vendor = 'Linux 2.6.13-15-default uhci_hcd' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.max_power = 0 (0x0) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.serial = '0000:01:07.0' (string) usb.speed_bcd = 4608 (0x1200) (int) usb.version_bcd = 272 (0x110) (int) usb.is_self_powered = true (bool) usb.can_wake_up = true (bool) usb.bus_number = 3 (0x3) (int) info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1_if0_printer_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1_if0_printer_noserial' (string) printer.description = 'Canon iP4000' (string) printer.product = 'iP4000' (string) printer.vendor = 'Canon' (string) info.vendor = 'Canon' (string) linux.device_file = '/dev/usb/lp0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 2 (0x2) (int) printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1_if0' (string) printer.device = '/dev/usb/lp0' (string) info.product = 'iP4000' (string) info.capabilities = {'printer'} (string list) info.category = 'printer' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1_if0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1/3-1:1.0' (string) linux.sysfs_path = '/sys/class/usb/lp0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1_if0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'USB Printer Interface' (string) usb.interface.protocol = 2 (0x2) (int) usb.interface.subclass = 1 (0x1) (int) usb.interface.class = 7 (0x7) (int) usb.interface.number = 0 (0x0) (int) info.linux.driver = 'usblp' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1/3-1:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 1193 (0x4a9) (int) usb.product_id = 4243 (0x1093) (int) usb.vendor = 'Canon, Inc.' (string) usb.product = 'USB Printer Interface' (string) usb.device_revision_bcd = 272 (0x110) (int) usb.max_power = 2 (0x2) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 2 (0x2) (int) usb.serial = 'B3EEA1' (string) usb.speed_bcd = 4608 (0x1200) (int) usb.version_bcd = 272 (0x110) (int) usb.is_self_powered = true (bool) usb.can_wake_up = false (bool) usb.bus_number = 3 (0x3) (int) info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1/3-1:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1/3-1:1.0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1' info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_1093_B3EEA1' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = false (bool) usb_device.is_self_powered = true (bool) usb_device.version_bcd = 272 (0x110) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.serial = 'B3EEA1' (string) usb_device.linux.device_number = 2 (0x2) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.max_power = 2 (0x2) (int) usb_device.device_revision_bcd = 272 (0x110) (int) info.product = 'iP4000' (string) usb_device.product = 'iP4000' (string) info.vendor = 'Canon, Inc.' (string) usb_device.vendor = 'Canon, Inc.' (string) usb_device.product_id = 4243 (0x1093) (int) usb_device.vendor_id = 1193 (0x4a9) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_class = 0 (0x0) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.configuration_value = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1' (string) info.linux.driver = 'usb' (string) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial_if0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'USB Vendor Specific Interface' (string) usb.interface.protocol = 255 (0xff) (int) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 255 (0xff) (int) usb.interface.number = 0 (0x0) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 255 (0xff) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 255 (0xff) (int) usb.vendor_id = 1193 (0x4a9) (int) usb.product_id = 8718 (0x220e) (int) usb.vendor = 'Canon, Inc.' (string) usb.product = 'USB Vendor Specific Interface' (string) usb.device_revision_bcd = 256 (0x100) (int) usb.max_power = 500 (0x1f4) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 3 (0x3) (int) usb.speed_bcd = 4608 (0x1200) (int) usb.version_bcd = 272 (0x110) (int) usb.is_self_powered = false (bool) usb.can_wake_up = true (bool) usb.bus_number = 3 (0x3) (int) info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.is_self_powered = false (bool) usb_device.version_bcd = 272 (0x110) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.linux.device_number = 3 (0x3) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.max_power = 500 (0x1f4) (int) usb_device.device_revision_bcd = 256 (0x100) (int) info.product = 'CanoScan N1240U/LiDE 30' (string) usb_device.product = 'CanoScan N1240U/LiDE 30' (string) info.vendor = 'Canon, Inc.' (string) usb_device.vendor = 'Canon, Inc.' (string) usb_device.product_id = 8718 (0x220e) (int) usb_device.vendor_id = 1193 (0x4a9) (int) usb_device.device_protocol = 255 (0xff) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_class = 255 (0xff) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.configuration_value = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2' (string) info.linux.driver = 'usb' (string) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) usb_device.bus_number = 3 (0x3) (int) usb_device.can_wake_up = true (bool) usb_device.is_self_powered = true (bool) usb_device.version_bcd = 272 (0x110) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.serial = '0000:01:07.0' (string) usb_device.linux.device_number = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.max_power = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) info.product = 'UHCI Host Controller' (string) usb_device.product = 'UHCI Host Controller' (string) info.vendor = 'Linux 2.6.13-15-default uhci_hcd' (string) usb_device.vendor = 'Linux 2.6.13-15-default uhci_hcd' (string) usb_device.product_id = 0 (0x0) (int) usb_device.vendor_id = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_class = 9 (0x9) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.configuration_value = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3' (string) info.linux.driver = 'usb' (string) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_0' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3' (string) udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0' info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x3038)' (string) pci.subsys_vendor = 'VIA Technologies, Inc.' (string) info.product = 'VT82xxxxx UHCI USB 1.1 Controller' (string) pci.product = 'VT82xxxxx UHCI USB 1.1 Controller' (string) info.vendor = 'VIA Technologies, Inc.' (string) pci.vendor = 'VIA Technologies, Inc.' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.device_class = 12 (0xc) (int) pci.subsys_vendor_id = 4358 (0x1106) (int) pci.subsys_product_id = 12344 (0x3038) (int) pci.vendor_id = 4358 (0x1106) (int) pci.product_id = 12344 (0x3038) (int) info.linux.driver = 'uhci_hcd' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1_if0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'USB Hub Interface' (string) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) info.linux.driver = 'hub' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 0 (0x0) (int) usb.product_id = 0 (0x0) (int) usb.vendor = 'Linux 2.6.13-15-default uhci_hcd' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.max_power = 0 (0x0) (int) usb.num_ports = 2 (0x2) (int) usb.linux.device_number = 1 (0x1) (int) usb.serial = '0000:01:07.1' (string) usb.speed_bcd = 4608 (0x1200) (int) usb.version_bcd = 272 (0x110) (int) usb.is_self_powered = true (bool) usb.can_wake_up = true (bool) usb.bus_number = 4 (0x4) (int) info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = true (bool) usb_device.is_self_powered = true (bool) usb_device.version_bcd = 272 (0x110) (int) usb_device.speed_bcd = 4608 (0x1200) (int) usb_device.serial = '0000:01:07.1' (string) usb_device.linux.device_number = 1 (0x1) (int) usb_device.num_ports = 2 (0x2) (int) usb_device.max_power = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) info.product = 'UHCI Host Controller' (string) usb_device.product = 'UHCI Host Controller' (string) info.vendor = 'Linux 2.6.13-15-default uhci_hcd' (string) usb_device.vendor = 'Linux 2.6.13-15-default uhci_hcd' (string) usb_device.product_id = 0 (0x0) (int) usb_device.vendor_id = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_class = 9 (0x9) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.configuration_value = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4' (string) info.linux.driver = 'usb' (string) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4' (string) udi = '/org/freedesktop/Hal/devices/pci_1106_3038' info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x3038)' (string) pci.subsys_vendor = 'VIA Technologies, Inc.' (string) info.product = 'VT82xxxxx UHCI USB 1.1 Controller' (string) pci.product = 'VT82xxxxx UHCI USB 1.1 Controller' (string) info.vendor = 'VIA Technologies, Inc.' (string) pci.vendor = 'VIA Technologies, Inc.' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 3 (0x3) (int) pci.device_class = 12 (0xc) (int) pci.subsys_vendor_id = 4358 (0x1106) (int) pci.subsys_product_id = 12344 (0x3038) (int) pci.vendor_id = 4358 (0x1106) (int) pci.product_id = 12344 (0x3038) (int) info.linux.driver = 'uhci_hcd' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2_if0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'USB Hub Interface' (string) usb.interface.protocol = 0 (0x0) (int) usb.interface.subclass = 0 (0x0) (int) usb.interface.class = 9 (0x9) (int) usb.interface.number = 0 (0x0) (int) info.linux.driver = 'hub' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 9 (0x9) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 1 (0x1) (int) usb.vendor_id = 0 (0x0) (int) usb.product_id = 0 (0x0) (int) usb.vendor = 'Linux 2.6.13-15-default ehci_hcd' (string) usb.product = 'USB Hub Interface' (string) usb.device_revision_bcd = 518 (0x206) (int) usb.max_power = 0 (0x0) (int) usb.num_ports = 4 (0x4) (int) usb.linux.device_number = 1 (0x1) (int) usb.serial = '0000:01:07.2' (string) usb.speed_bcd = 294912 (0x48000) (int) usb.version_bcd = 512 (0x200) (int) usb.is_self_powered = true (bool) usb.can_wake_up = true (bool) usb.bus_number = 5 (0x5) (int) info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) usb_device.bus_number = 5 (0x5) (int) usb_device.can_wake_up = true (bool) usb_device.is_self_powered = true (bool) usb_device.version_bcd = 512 (0x200) (int) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.serial = '0000:01:07.2' (string) usb_device.linux.device_number = 1 (0x1) (int) usb_device.num_ports = 4 (0x4) (int) usb_device.max_power = 0 (0x0) (int) usb_device.device_revision_bcd = 518 (0x206) (int) info.product = 'EHCI Host Controller' (string) usb_device.product = 'EHCI Host Controller' (string) info.vendor = 'Linux 2.6.13-15-default ehci_hcd' (string) usb_device.vendor = 'Linux 2.6.13-15-default ehci_hcd' (string) usb_device.product_id = 0 (0x0) (int) usb_device.vendor_id = 0 (0x0) (int) usb_device.device_protocol = 1 (0x1) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_class = 9 (0x9) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.configuration_value = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5' (string) info.linux.driver = 'usb' (string) info.bus = 'usb_device' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1106_3104' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5' (string) udi = '/org/freedesktop/Hal/devices/pci_1106_3104' info.udi = '/org/freedesktop/Hal/devices/pci_1106_3104' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x3104)' (string) pci.subsys_vendor = 'VIA Technologies, Inc.' (string) info.product = 'USB 2.0' (string) pci.product = 'USB 2.0' (string) info.vendor = 'VIA Technologies, Inc.' (string) pci.vendor = 'VIA Technologies, Inc.' (string) pci.device_protocol = 32 (0x20) (int) pci.device_subclass = 3 (0x3) (int) pci.device_class = 12 (0xc) (int) pci.subsys_vendor_id = 4358 (0x1106) (int) pci.subsys_product_id = 12548 (0x3104) (int) pci.vendor_id = 4358 (0x1106) (int) pci.product_id = 12548 (0x3104) (int) info.linux.driver = 'ehci_hcd' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2' (string) udi = '/org/freedesktop/Hal/devices/ieee1394_guid_1106000000e332' info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_1106000000e332' (string) linux.subsystem = 'ieee1394' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'Unknown (0x001106)' (string) info.vendor = 'Unknown (0x001106)' (string) ieee1394.product = 'Unknown (0x001106)' (string) ieee1394.product_id = 0 (0x0) (int) ieee1394.vendor = 'Unknown (0x001106)' (string) ieee1394.version = 1 (0x1) (int) ieee1394.specifier_id = 94 (0x5e) (int) ieee1394.vendor_id = 4358 (0x1106) (int) ieee1394.guid = 4791671673905970 (0x1106000000e332) (uint64) info.parent = '/org/freedesktop/Hal/devices/pci_1106_3044' (string) info.bus = 'ieee1394' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3/fw-host0/001106000000e332/001106000000e332-0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3/fw-host0/001106000000e332/001106000000e332-0' (string) udi = '/org/freedesktop/Hal/devices/pci_1106_3044' info.udi = '/org/freedesktop/Hal/devices/pci_1106_3044' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x3044)' (string) pci.subsys_vendor = 'VIA Technologies, Inc.' (string) info.product = 'IEEE 1394 Host Controller' (string) pci.product = 'IEEE 1394 Host Controller' (string) info.vendor = 'VIA Technologies, Inc.' (string) pci.vendor = 'VIA Technologies, Inc.' (string) pci.device_protocol = 16 (0x10) (int) pci.device_subclass = 0 (0x0) (int) pci.device_class = 12 (0xc) (int) pci.subsys_vendor_id = 4358 (0x1106) (int) pci.subsys_product_id = 12356 (0x3044) (int) pci.vendor_id = 4358 (0x1106) (int) pci.product_id = 12356 (0x3044) (int) info.linux.driver = 'ohci1394' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3' (string) udi = '/org/freedesktop/Hal/devices/net_00_40_f4_a7_87_1c' info.udi = '/org/freedesktop/Hal/devices/net_00_40_f4_a7_87_1c' (string) linux.subsystem = 'net' (string) linux.hotplug_type = 2 (0x2) (int) net.80203.mac_address = 278982526748 (0x40f4a7871c) (uint64) info.product = 'Networking Interface' (string) net.interface_up = true (bool) net.arp_proto_hw_id = 1 (0x1) (int) net.linux.ifindex = 4 (0x4) (int) net.address = '00:40:f4:a7:87:1c' (string) net.interface = 'eth1' (string) net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) info.capabilities = {'net', 'net.80203'} (string list) info.category = 'net.80203' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) linux.sysfs_path = '/sys/class/net/eth1' (string) udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'RT8139' (string) pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.' (string) info.product = 'RTL-8139/8139C/8139C+' (string) pci.product = 'RTL-8139/8139C/8139C+' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.device_class = 2 (0x2) (int) pci.subsys_vendor_id = 4332 (0x10ec) (int) pci.subsys_product_id = 33081 (0x8139) (int) pci.vendor_id = 4332 (0x10ec) (int) pci.product_id = 33081 (0x8139) (int) info.linux.driver = '8139too' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1b8' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b8' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x0000)' (string) pci.subsys_vendor = 'Unknown (0x0000)' (string) info.product = 'nForce PCI-to-PCI bridge' (string) pci.product = 'nForce PCI-to-PCI bridge' (string) info.vendor = 'nVidia Corporation' (string) pci.vendor = 'nVidia Corporation' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.device_class = 6 (0x6) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.subsys_product_id = 0 (0x0) (int) pci.vendor_id = 4318 (0x10de) (int) pci.product_id = 440 (0x1b8) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_0' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_0' (string) linux.subsystem = 'ide' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'IDE device (master)' (string) ide.channel = 0 (0x0) (int) ide.host = 0 (0x0) (int) info.linux.driver = 'ide-disk' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc' (string) info.bus = 'ide' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_1' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_1' (string) linux.subsystem = 'ide' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'IDE device (slave)' (string) ide.channel = 1 (0x1) (int) ide.host = 0 (0x0) (int) info.linux.driver = 'ide-disk' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc' (string) info.bus = 'ide' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_0' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_0' (string) linux.subsystem = 'ide' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'IDE device (master)' (string) ide.channel = 0 (0x0) (int) ide.host = 1 (0x1) (int) info.linux.driver = 'ide-cdrom' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc' (string) info.bus = 'ide' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_1' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_1' (string) linux.subsystem = 'ide' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'IDE device (slave)' (string) ide.channel = 1 (0x1) (int) ide.host = 1 (0x1) (int) info.linux.driver = 'ide-cdrom' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc' (string) info.bus = 'ide' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.1' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.1' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1bc' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x0c11)' (string) pci.subsys_vendor = 'nVidia Corporation' (string) info.product = 'nForce IDE' (string) pci.product = 'nForce IDE' (string) info.vendor = 'nVidia Corporation' (string) pci.vendor = 'nVidia Corporation' (string) pci.device_protocol = 138 (0x8a) (int) pci.device_subclass = 1 (0x1) (int) pci.device_class = 1 (0x1) (int) pci.subsys_vendor_id = 4318 (0x10de) (int) pci.subsys_product_id = 3089 (0xc11) (int) pci.vendor_id = 4318 (0x10de) (int) pci.product_id = 444 (0x1bc) (int) info.linux.driver = 'AMD_IDE' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1a0' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1a0' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x0c11)' (string) pci.subsys_vendor = 'nVidia Corporation' (string) info.product = 'NVCrush11 [GeForce2 MX Integrated Graphics]' (string) pci.product = 'NVCrush11 [GeForce2 MX Integrated Graphics]' (string) info.vendor = 'nVidia Corporation' (string) pci.vendor = 'nVidia Corporation' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 0 (0x0) (int) pci.device_class = 3 (0x3) (int) pci.subsys_vendor_id = 4318 (0x10de) (int) pci.subsys_product_id = 3089 (0xc11) (int) pci.vendor_id = 4318 (0x10de) (int) pci.product_id = 416 (0x1a0) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b7' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0' (string) udi = '/org/freedesktop/Hal/devices/pci_10de_1b7' info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b7' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x0000)' (string) pci.subsys_vendor = 'Unknown (0x0000)' (string) info.product = 'nForce AGP to PCI Bridge' (string) pci.product = 'nForce AGP to PCI Bridge' (string) info.vendor = 'nVidia Corporation' (string) pci.vendor = 'nVidia Corporation' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 4 (0x4) (int) pci.device_class = 6 (0x6) (int) pci.subsys_vendor_id = 0 (0x0) (int) pci.subsys_product_id = 0 (0x0) (int) pci.vendor_id = 4318 (0x10de) (int) pci.product_id = 439 (0x1b7) (int) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'System Board' (string) pnp.description = 'System Board' (string) pnp.id = 'PNP0c01' (string) info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:00' (string) linux.sysfs_path = '/sys/devices/pnp0/00:00' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:01' (string) linux.sysfs_path = '/sys/devices/pnp0/00:01' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:02' (string) linux.sysfs_path = '/sys/devices/pnp0/00:02' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:03' (string) linux.sysfs_path = '/sys/devices/pnp0/00:03' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'AT DMA Controller' (string) pnp.description = 'AT DMA Controller' (string) pnp.id = 'PNP0200' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:04' (string) linux.sysfs_path = '/sys/devices/pnp0/00:04' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'AT Real-Time Clock' (string) pnp.description = 'AT Real-Time Clock' (string) pnp.id = 'PNP0b00' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:05' (string) linux.sysfs_path = '/sys/devices/pnp0/00:05' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'AT-style speaker sound' (string) pnp.description = 'AT-style speaker sound' (string) pnp.id = 'PNP0800' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:06' (string) linux.sysfs_path = '/sys/devices/pnp0/00:06' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'Math Coprocessor' (string) pnp.description = 'Math Coprocessor' (string) pnp.id = 'PNP0c04' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:07' (string) linux.sysfs_path = '/sys/devices/pnp0/00:07' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'ECP printer port' (string) pnp.description = 'ECP printer port' (string) pnp.id = 'PNP0401' (string) info.linux.driver = 'parport_pc' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:08' (string) linux.sysfs_path = '/sys/devices/pnp0/00:08' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0' (string) info.callouts.remove = {'hal-resmgr'} (string list) info.callouts.add = {'hal-resmgr'} (string list) resmgr.class = 'modem' (string) resmgr.device = '/dev/ttyS0' (string) linux.device_file = '/dev/ttyS0' (string) linux.subsystem = 'tty' (string) linux.hotplug_type = 2 (0x2) (int) info.product = '16550A-compatible COM port' (string) serial.type = 'platform' (string) serial.port = 0 (0x0) (int) serial.device = '/dev/ttyS0' (string) serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) linux.sysfs_path = '/sys/class/tty/ttyS0' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = '16550A-compatible COM port' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string) info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:09' (string) linux.sysfs_path = '/sys/devices/pnp0/00:09' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1' (string) info.callouts.remove = {'hal-resmgr'} (string list) info.callouts.add = {'hal-resmgr'} (string list) resmgr.class = 'modem' (string) resmgr.device = '/dev/ttyS1' (string) linux.device_file = '/dev/ttyS1' (string) linux.subsystem = 'tty' (string) linux.hotplug_type = 2 (0x2) (int) info.product = '16550A-compatible COM port' (string) serial.type = 'platform' (string) serial.port = 1 (0x1) (int) serial.device = '/dev/ttyS1' (string) serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) info.capabilities = {'serial'} (string list) info.category = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) linux.sysfs_path = '/sys/class/tty/ttyS1' (string) udi = '/org/freedesktop/Hal/devices/computer' storage.policy.default.mount_option.exec = true (bool) storage.policy.default.mount_option.pamconsole = true (bool) storage.policy.default.mount_option.noauto = true (bool) storage.policy.default.managed_keyword.secondary = 'kudzu' (string) storage.policy.default.managed_keyword.primary = 'managed' (string) storage.policy.default.use_managed_keyword = true (bool) storage.policy.default.mount_root = '/media' (string) org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', '', 'b'} (string list) org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'Hibernate', 'SetPowerSave'} (string list) info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list) info.addons = {'hald-addon-acpi'} (string list) system.product = 'System Name System Version' (string) system.vendor = 'System Manufacturer' (string) smbios.chassis.type = 'Tower' (string) smbios.chassis.manufacturer = 'Chassis Manufacture' (string) smbios.system.uuid = 'Not Settable' (string) smbios.system.serial = 'SYS-1234567890' (string) smbios.system.version = 'System Version' (string) smbios.system.product = 'System Name' (string) smbios.system.manufacturer = 'System Manufacturer' (string) smbios.bios.release_date = '04/29/2003' (string) smbios.bios.version = 'ASUS A7N266-VM ACPI BIOS Rev 1006' (string) smbios.bios.vendor = 'Award Software, Inc.' (string) power_management.acpi.linux.version = '20050408' (string) power_management.type = 'acpi' (string) power_management.is_enabled = true (bool) system.formfactor = 'desktop' (string) system.kernel.machine = 'i686' (string) system.kernel.version = '2.6.13-15-default' (string) system.kernel.name = 'Linux' (string) info.udi = '/org/freedesktop/Hal/devices/computer' (string) info.product = 'Computer' (string) linux.sysfs_path_device = '(none)' (string) info.bus = 'unknown' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = '16550A-compatible COM port' (string) pnp.description = '16550A-compatible COM port' (string) pnp.id = 'PNP0501' (string) info.linux.driver = 'serial' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:0a' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string) pnp.id = 'PNP0303' (string) info.linux.driver = 'i8042 kbd' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:0b' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'PS/2 Port for PS/2-style Mice' (string) pnp.description = 'PS/2 Port for PS/2-style Mice' (string) pnp.id = 'PNP0f13' (string) info.linux.driver = 'i8042 aux' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:0c' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string) pnp.id = 'PNP0c02' (string) info.linux.driver = 'system' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:0d' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNPb006' info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb006' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'MPU401 compatible' (string) pnp.description = 'MPU401 compatible' (string) pnp.id = 'PNPb006' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:0e' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0e' (string) udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f' info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f' (string) linux.subsystem = 'pnp' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'Joystick/Game port' (string) pnp.description = 'Joystick/Game port' (string) pnp.id = 'PNPb02f' (string) info.parent = '/org/freedesktop/Hal/devices/computer' (string) info.bus = 'pnp' (string) linux.sysfs_path_device = '/sys/devices/pnp0/00:0f' (string) linux.sysfs_path = '/sys/devices/pnp0/00:0f' (string) Dumped 90 device(s) from the Global Device List: ------------------------------------------------ ----- last ~200 lines of /var/log/messages ----- wtmp begins Sun Oct 2 21:19:47 2005 ----- /var/log/boot.msg ----- -bash: /var/log/boot.msg: Permission denied
yes that was ok, but please attach (create attachment link) next time the files to the bug, its easier to read, thanks. So please attach these files, as root do: cp /var/log/boot.msg /tmp/ tail -n200 /var/log/messages > /tmp/messages attach /tmp/messages and /tmp/boot.msg you can delete the 2 files in /tmp after attaching.
Created attachment 53784 [details] as requested
Created attachment 53785 [details] also as requested hope i've done that right for you, thanks.
hi i've attached those files, is this correct. thanks for helping
Christian, could you please look at #4, device recected.
module loaded, so hotplug works so far. This look like a kernel bug for me. Some scsi problem that i don't understand. Jonah, which version of 10.0 is it. Final version?
yeah it's the opensuse.org 10.0 final eval version the 32bit eval final version that's on all the servers now. i've read people are also having problems such as with ipods and other usb drive devices not responding
Created attachment 54204 [details] i've re-attaced this because i'm not entirely sure i did it right the first time with the drive turned on first etc. is any progress being made to fix this problem, i still can't use my hardrive. i've reattached to make sure you got the right file as i'm not sure if i attached the drive last time i submitted this.
Created attachment 54205 [details] same as above same as above
looks like a dup of bug #105964 timeouts with usb2 storage device.
Can you try the 2.6.14 kernel and attach the hwinfo output from this new kernel? ftp://ftp.suse.com/pub/people/olh/kernel/bug105964/
ok here's what i got: linux:~ # hwinfo --disk 22: IDE 00.0: 10600 Disk [Created at block.188] UDI: /org/freedesktop/Hal/devices/storage_serial_S013J10WB36015 Unique ID: l_yX.pT+IO2DTZs4 Parent ID: WL76.nVxm5QyYLE1 SysFS ID: /block/hda SysFS BusID: 0.0 SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.0 Hardware Class: disk Model: "SAMSUNG SP1604N" Vendor: "SAMSUNG" Device: "SP1604N" Revision: "TM100-23" Serial ID: "S013J10WB36015" Driver: "AMD_IDE", "ide-disk", "ide-disk" Device File: /dev/hda Device Files: /dev/hda, /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015, /dev/disk/by-path/pci-0000:00:09.0-ide-0:0 Device Number: block 3:0-3:63 BIOS id: 0x80 Geometry (Logical): CHS 19457/255/63 Size: 312581808 sectors a 512 bytes Geometry (BIOS EDD): CHS 310101/16/63 Size (BIOS EDD): 312581808 sectors Geometry (BIOS Legacy): CHS 1024/255/63 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 23: IDE 01.0: 10600 Disk [Created at block.188] UDI: /org/freedesktop/Hal/devices/storage_serial_5GC0YPFW Unique ID: u0Ql.nIuVdwtgHf9 Parent ID: WL76.nVxm5QyYLE1 SysFS ID: /block/hdb SysFS BusID: 0.1 SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.1 Hardware Class: disk Model: "ST380020A" Device: "ST380020A" Revision: "3.39" Serial ID: "5GC0YPFW" Driver: "AMD_IDE", "ide-disk", "ide-disk" Device File: /dev/hdb Device Files: /dev/hdb, /dev/disk/by-id/ata-ST380020A_5GC0YPFW, /dev/disk/by-path/pci-0000:00:09.0-ide-0:1 Device Number: block 3:64-3:127 BIOS id: 0x81 Geometry (Logical): CHS 155061/16/63 Size: 156301488 sectors a 512 bytes Geometry (BIOS EDD): CHS 155061/16/63 Size (BIOS EDD): 156301488 sectors Geometry (BIOS Legacy): CHS 1024/255/63 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #14 (IDE interface) 26: SCSI 1900.0: 10600 Disk [Created at block.188] Unique ID: n2I9.ZGmms3QDCAA Parent ID: ndC_.EehyuzDVk+7 SysFS ID: /block/sda SysFS BusID: 25:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host25/target25:0:0/25:0:0:0 Hardware Class: disk Model: "HDS72251 6VLAT20" Vendor: usb 0x07ab "HDS72251" Device: usb 0xfccd "6VLAT20" Revision: "V34O" Serial ID: "FW436_0B29140042F9AA27" Driver: "usb-storage", "sd" Device File: /dev/sda (/dev/sg0) Device Number: block 8:0-8:15 (char 21:0) Speed: 480 Mbps Module Alias: "usb:v07ABpFCCDd0436dc00dsc00dp00ic08isc06ip50" Driver Info #0: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller)
so it works ok for you? sda is detected after all. you may want to check dmesg for timeout erros: dmesg | grep -- -71
this is what that command gives me. still my drive won't work. linux:~ # dmesg | grep -- -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71 usb 5-4: device descriptor read/64, error -71
Are you able to compile your own debug kernels to find the change between 2.6.11 and 2.6.13 that breaks your device?
i'm really sorry to say that i'm a beginner and don't really know how to do much with linux yet.
I will build you a few testkernels tomorrow. One plain 2.6.11 to verify that it still works, and a 2.6.13 to verify that it is indeed broken. Then we will have to check many versions inbetween. I hope you have a good internet connection.
thank you. my internet connection is quite good so it should be fine. thanks again i appreciate the help.
ftp://ftp.suse.com/pub/people/olh/kernel/bug121899/ there are now 2 bzImage boot files, one for 2.6.11 and one for 2.6.13 copy them to /boot/ and add 2 new entries to /boot/grub/menu.lst: title usbtest 2.6.11 kernel (hd0,1)/bzImage-2.6.11.12 panic=30 root=/dev/hda2 init=/bin/bash --login you man need to change the (hd0,1) part to look like the other entries there, look for the /vmlinuz entry. If in doubt, attach your menu.lst file. After a reboot, a new entry will appear in the grub menu. Select it and after a while you will get a shell. Run 'dmesg | grep -- -71' again. The 2.6.11 kernel will hopefully show no errors. Then run /sbin/reboot to boot back into the "normal" kernel.
hi i'll let you check menu.lst file and advise what entries to make here just incase i mess anything up thanks. # Modified by YaST2. Last modification on Wed Nov 23 17:21:24 GMT 2005 color white/blue black/light-gray default 0 timeout 8 gfxmenu (hd0,1)/boot/message ###Don't change this comment - YaST2 identifier: Original name: linux### title SUSE LINUX 10.0 root (hd0,1) kernel /boot/vmlinuz root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent showopts initrd /boot/initrd ###Don't change this comment - YaST2 identifier: Original name: windows### title Microsoft Windows XP Professional map (hd0) (hd1) map (hd1) (hd0) root (hd1,0) savedefault makeactive chainloader +1 ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- SUSE LINUX 10.0 root (hd0,1) kernel /boot/vmlinuz root=/dev/hda2 vga=normal showopts ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off 3 initrd /boot/initrd
append this to your menu.lst: title usbtest 2.6.11 kernel (hd0,1)/boot/bzImage-2.6.11.12 panic=30 root=/dev/hda2 init=/bin/bash --login title usbtest 2.6.13 kernel (hd0,1)/boot/bzImage-2.6.13.4 panic=30 root=/dev/hda2 init=/bin/bash --login (put all kernel args in one single line)
ok i gave it a go and both these other two kernels booted ok and the grub entry works ok. my problem now is how to check the drive. i tried to type dmesg | -- -71 but i don't know how to get the | character. i got one similar but with a slight gap in the middle. my keyboard has the | character marked on and this works from kde but the closest i can get is pressing shift hash key which is normally a ~ character but gives me the line with slight gap from command prompt. the drive doesn't tick over though when plugged in from either of these kernels so prob means there's no problems.
dont you have an us keyboard? The default keymap in the kernel is an US keyboard layout. But you can load your own keymap via loadkeys. Do a grep KEYTABLE /etc/sysconfig/keyboard In my case, it would be 'loadkeys mac-us.map.gz'
well i have a uk keyboard, any ideas what i do for that. sorry to be so demanding i appreciate your help and realise i'm useless!!
try 'loadkeys uk'
hey what d'ya know! load keys uk worked like a charm however the command didn't seem to do anything. i mean no errors were shown or anything but on pressing return i just got another command prompt is this right. i tried unplugging the drive and then plugging it back in again on the command prompt and it was detected fine and didn't tick over like it does when it's not working. also something interesting. the device seems to be detected twice. there are two entries of the usb storage device. all the blurb that appears when you plug it in comes up and the same text repeated again.
ok, and this happens even with 2.6.13? If yes, then I will build a kernel from the original 10.0 sources. If that still works, then some of the config options need review.
yeah seems to just be the same in 2.6.13 too, like i say the drive makes this annoying clicking sound when it's not working, but runs silenty in suse 9.3 and windows xp
there is now a bzImage-2.6.13-15, can you check if that one works as well?
yeah that one works fine also. just like the other two i tried.
I was busy with other stuff the last days. There is now a new 'bzImage' file, with more options enabled. Also, can you try if the default kernel works any better with the 'apic' boot option?
what' the apic boot option then?
you mean where to specify the additional 'apic' option? During boot there is a menu for 'Linux, Safe settings, Floppy'. Perhaps also Windows. At the bottom, there is a text entry area. I heard its not obvious to recognize anymore in 10.0. Just type ' apic ' there and it will be passed to the kernel.
the apic thing doesn't seem to work or do anything. i'm not sure it even knew i entered it in as no text shows up anymore when you type a command on the boot menu of suse 10.0, i know it used to in 9.3 like you say as i had to once type the sax command as for the new bzimage, that seems again to work fine. the drive doesn't tick over - as it does when it won't work. it constantly ticks as soon as the hardware icon on the boot splash screen lights up.
i figured out that if you press f2 on the boot screen for other options it opens the text box up and i put apic in there. but it didn't seem to do anything, booted as normal and drive still doesn't work.
ok, I will look through the .config differences between the working and non-working kernel and provide more binaries tomorrow.
I have uploaded a kernel-default.rpm which has the drivers compiled in. Can you check if that makes any difference?
i tried to install this with yast but it says: #### YaST2 conflicts list - generated 2005-12-19 22:49:02 #### kernel-default 2.6.13-15.7_bug121899_200512181932 conflict Conflicts with: kernel-default-nongpl requires kernel-default = 2.6.13-15.7 kernel-default-nongpl requires kernel-default = 2.6.13-15.7 kernel-default-nongpl requires kernel-default = 2.6.13-15.7 kernel-default-nongpl requires kernel-default = 2.6.13-15.7 Conflict Resolution: ( ) Do Not Update kernel-default ( ) Remove the Conflicting Package Delete kernel-default-nongpl ( ) Ignore Conflict and Risk System Inconsistencies #### YaST2 conflicts list END ###
I have uploaded also kernel-default-nongpl-2.6.13-15.7_bug121899_200512181932.i586.rpm
hi i successfully installed the rpms you put up, thanks for that. unfortunatley the drive still isn't working. it's made no difference.
hi it's been so long, i wondered if i'd been forgotten or if there were any news ideas on this problem. i still can't access my portable drive...
hi i still can't get the drive to work but i found this bug on here: bug #135362 is this related and what is this patch and how does it work? please respond thanks.
sorry, this bug scrolled off. I have currently no idea how to track this down further other than going from the minimal config that worked to the full featured config that does not work. You can try the current kernel 2.6.16-rc6. Install the rpm from ftp://ftp.suse.com/pub/projects/kernel/kotd/i386/HEAD/kernel-default.i586.rpm Maybe you will get an unresolved dependency for kernel-default-nongpl. You have to ignore it, or just remove the kernel-default-nongpl package, you probably dont need it.
Does this device still not work for 10.1 beta7?
i daren't try 10.1 betas just because other than the drive the system is all working well and i don't want to break anything
i get a perl-bootloader dependancy prob plus the kernel-default-nongpl etc. i don't want my system to not boot up properly so i didn't risk it
just ignore that bootloader part. open a terminal window become root with 'su -' rpm -e kernel-default-nongpl rpm -Uvh --nodeps new-kernel.rpm there is no need to install 10.1, as the bug is in the kernel.
ah, now here's a development i downloaded from the link above and installed the kernel how you said, rebooted and thought wow! i thought it was working as the drive name came up in my computer, i hoorayed with joy but then an error message. i right clicked the drive and clicked mount it said: mount: can't find /dev/sda1 in /etc/fstab or /etc/mtab Please check that the device is plugged correctly. however the drive was running silenty, not clicking/ticking over as it used to when not working. i then tried the internet to report this here but my wireless card wouldn't work, so i had to downgrade the kernel back down off the suse dvd, reboot and then the drive was ticking again. so i'm reporting this back wiht my old kernel as new one messed up internet connection. close, but didn't work - and a pain with having to downgrade again.
ok, the missing subfs prevents the mounting. I'm not sure how to fixup the wireless, you will need some extra wlan-KMP rpms now in 10.1. Can you try it once again with the new kernel and mount the device manually? in a terminal, type: su - mount /dev/sda1 /mnt dmesg > /tmp/dmesg-2.6.16.txt umount /mnt then attach /tmp/dmesg-2.6.16.txt
Created attachment 74794 [details] dmesg text file for new kernel hi here is the attachment
ok, no obvious errors. what wlan modules do you need? Can you attach the 'hwinfo' output from the 10.0 kernel? I think we can fix your setup for a 10.1 kernel on a 10.0 system.
Created attachment 75368 [details] hardware info output hi here is my current 10.0 hwinfo.txt with usb hardrive unattached. actually i've got no printers or anything attached, will this matter?
oh and the other thing is how do we get the drive working once i get 10.1 kernel installed and working? as it didn't seem to work with the KOTD i tried out
I dont see any driver replacement for the rt2500.ko driver in 10.0. It had modalias 'pci:v00001814d00000201sv*sd*bc*sc*i*', but no such thing exists in 10.1. bug #149141 has the details.
i've now updated to suse 10.1 and the usb hard drive now works perfectly which is great news. so i guess though i'm fixed the bug for 10.0 isn't but just to let you know 10.1 is ok. as suspected though my sweex conexant wlan pcmcia card doesn't work - yast doesn't detect it even under network cards
yes, there is no driver for it, rt2500 is appearently too unstable. thanks for your patience.