Bugzilla – Bug 1222187
Cooling fans don't spins up on rx580
Last modified: 2024-04-26 14:15:54 UTC
After upgrading, my fans eventually stops working anymore on my rx580 from china. After I saw it, i tested on a new arch linux and old build of tumbleweed. Its works normally only on old build. Manual mode don't change anything at all. Setting up kernel option on starting acpi=off too. Any software, what may mess with fans, removed, and nothing changed. Reproducible: Always Steps to Reproduce: 1.Start PC 2.Wait until 85+ C 3.Check temp Actual Results: Cooling fans don't activate. Expected Results: Cooling fans should keep the CPU temperature at around 20-40C
Exactly which version was your good-working kernel? If it's a regression, we need to narrow down the range. Please give the dmesg outputs from both good and bad-working kernels, as well as hwinfo outputs from both.
Unfortunately, I cannot provide you with the kernel version, because now the PC does not load the GUI and does not run the cooler on the video card. I tried to run old versions up to ubuntu 20.04 (it loads completely, but does not run coolers, also in the drm logs it cannot initialize the SRAT table) I will roll back further, let's see what the problem is.
UPD: ubuntu 19 - the behavior has not changed, 21 - same.
Retrieved a kernel version with my old laptop. 6.7.7-1-default - good kernel(cant confirm) Bad kernel: systemctl: https://pastebin.com/yBXRBRDp dmesg: https://pastebin.com/5MiGXxiY
Any additional info?
Don't change the bugzilla priority. It's only for developer side. Could you confirm whether the kernel in OBS home:tiwai:kernel:6.7 works for you? If yes, please get the dmesg output from the working and non-working kernels, and attach to Bugzilla. Also, the output of hwinfo from both kernels, too.
In compilation process: LD [M] fs/xfs/xfs.o LD [M] fs/bcachefs/bcachefs.o make[1]: *** [/usr/src/linux-6.7.9-1.gc6dad0c/Makefile:1928: .] Error 2 I don't know how to fix this issue, so i cant build core
Minor problem solved. I had to use a crutch, replace it in the config with CONFIG_SYSTEM_TRUSTED_KEYS="".