130186 – CD drive not found

Bug 130186 - CD drive not found

Summary: CD drive not found

Status:	RESOLVED DUPLICATE of bug 133651

Alias:	None

Product:	SUSE Linux 10.1
Classification:	openSUSE
Component:	Hotplug (show other bugs)
Version:	Alpha 2
Hardware:	Other Other

Priority:	P5 - None Severity: Normal (vote)
Target Milestone:	---
Assignee:	Kay Sievers
QA Contact:	Klaus Kämpf

URL:
Whiteboard:
Keywords:

Depends on:
Blocks:

Clone This Bug

Reported:	2005-10-23 11:30 UTC by Ulrich Derenthal
Modified:	2005-11-17 20:28 UTC (History)
CC List:	0 users

See Also:
Found By:	Other
Services Priority:
Business Priority:
Blocker:	---
Marketing QA Status:	---
IT Deployment:	---

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.

Description Ulrich Derenthal 2005-10-23 11:30:46 UTC

With Suse 10.0, I had the following problem: my cd drive (a standard CDRW drive)
was not detected very well: it showed up some times during startup, but then
/dev/hdg did not exists. However, when I opened Yast and its CD-ROM
configuration component, it was found twice, /dev/hdg started to exist (just by
opening the component, the drive seemed to be initialized), and everything
worked just fine until the next reboot.

Now with 10.1 Alpha 2, the only difference is that the Yast component does no
longer find the drive: It just tells me that no cd/dvd device was found.

/proc/ide/ide3 for hdg exists (with /proc/ide/ide3/hdg/model containing "LITE-ON
LTR-48125W" and /proc/ide/ide3/hdg/driver containing "ide-default version
0.9.newide")

dmesg tells me (where especially "ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings:
hdg:DMA, hdh:pio" and "hdg: LITE-ON LTR-48125W, ATAPI CD/DVD-ROM drive" tell me
that the drive is somehow found):

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
PDC20276: IDE controller at PCI slot 0000:00:0f.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
PDC20276: chipset revision 1
PDC20276: 100% native mode on irq 10
    ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: HDS722516VLAT80, ATA DISK drive
ide0 at 0xec00-0xec07,0xe802 on irq 10
hda: max request size: 1024KiB
hda: 321672960 sectors (164696 MB) w/7938KiB Cache, CHS=20023/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 >
Probing IDE interface ide1...
hdc: HDS722525VLAT80, ATA DISK drive
ide1 at 0xe400-0xe407,0xe002 on irq 10
hdc: max request size: 1024KiB
hdc: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100)
hdc: cache flushes supported
 hdc: hdc1
VP_IDE: IDE controller at PCI slot 0000:00:11.1
    ACPI-0212: *** Warning: Device is not power manageable
    ACPI-0402: *** Warning: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:DMA, hdh:pio
Probing IDE interface ide2...
hde: ST380021A, ATA DISK drive
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
hde: max request size: 128KiB
hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hde: cache flushes not supported
 hde: hde1 hde2 < hde5 hde6 hde7 hde8 >
Probing IDE interface ide3...
hdg: LITE-ON LTR-48125W, ATAPI CD/DVD-ROM drive
ide3 at 0x170-0x177,0x376 on irq 15

Comment 1 Michael Gross 2005-10-24 13:14:01 UTC

Please attach the output of `hwinfo --ide'.

Comment 2 Ulrich Derenthal 2005-10-24 15:49:26 UTC

hwinfo --ide gives the following output (and /dev/hdg exists after that; I am not sure if this was caused by running this command; I could check that later)

16: IDE 00.0: 10600 Disk
  [Created at block.188]
  UDI: /org/freedesktop/Hal/devices/storage_serial_VN643ECDD516WD
  Unique ID: Fffu.qLc2Uco_JMD
  Parent ID: _+Pw.jgy9NAAThjB
  SysFS ID: /block/hda
  SysFS BusID: 0.0
  SysFS Device Link: /devices/pci0000:00/0000:00:0f.0/ide0/0.0
  Hardware Class: disk
  Model: "HDS722516VLAT80"
  Device: "HDS722516VLAT80"
  Revision: "V34OA6EA"
  Serial ID: "VN643ECDD516WD"
  Driver: "Promise_IDE", "ide-disk", "ide-disk"
  Device File: /dev/hda
  Device Files: /dev/hda, /dev/disk/by-id/ata-HDS722516VLAT80_VN643ECDD516WD, /dev/disk/by-path/pci-0000:00:0f.0-ide-0:0
  Device Number: block 3:0-3:63
  Geometry (Logical): CHS 20023/255/63
  Size: 321672960 sectors a 512 bytes
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
  Attached to: #6 (RAID bus controller)

17: IDE 02.0: 10600 Disk
  [Created at block.188]
  UDI: /org/freedesktop/Hal/devices/storage_serial_VN69TECKC2ET8A
  Unique ID: 90A1.j4nFmnWkuYF
  Parent ID: _+Pw.jgy9NAAThjB
  SysFS ID: /block/hdc
  SysFS BusID: 1.0
  SysFS Device Link: /devices/pci0000:00/0000:00:0f.0/ide1/1.0
  Hardware Class: disk
  Model: "HDS722525VLAT80"
  Device: "HDS722525VLAT80"
  Revision: "V36OA6MA"
  Serial ID: "VN69TECKC2ET8A"
  Driver: "Promise_IDE", "ide-disk", "ide-disk"
  Device File: /dev/hdc
  Device Files: /dev/hdc, /dev/disk/by-id/ata-HDS722525VLAT80_VN69TECKC2ET8A, /dev/disk/by-path/pci-0000:00:0f.0-ide-1:0
  Device Number: block 22:0-22:63
  Geometry (Logical): CHS 30401/255/63
  Size: 488397168 sectors a 512 bytes
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #6 (RAID bus controller)

18: IDE 04.0: 10600 Disk
  [Created at block.188]
  UDI: /org/freedesktop/Hal/devices/storage_serial_3HV25EWP
  Unique ID: 3Ng9.X44ALPeDkJ3
  Parent ID: +Y+h.mcsZ0a690T4
  SysFS ID: /block/hde
  SysFS BusID: 2.0
  SysFS Device Link: /devices/pci0000:00/0000:00:11.1/ide2/2.0
  Hardware Class: disk
  Model: "ST380021A"
  Device: "ST380021A"
  Revision: "3.19"
  Serial ID: "3HV25EWP"
  Driver: "VIA_IDE", "ide-disk", "ide-disk"
  Device File: /dev/hde
  Device Files: /dev/hde, /dev/disk/by-id/ata-ST380021A_3HV25EWP, /dev/disk/by-path/pci-0000:00:11.1-ide-0:0
  Device Number: block 33:0-33:63
  Geometry (Logical): CHS 155061/16/63
  Size: 156301488 sectors a 512 bytes
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
  Attached to: #8 (IDE interface)

19: IDE 06.0: 10602 CD-ROM (CD-RW)
  [Created at block.192]
  Unique ID: _jAI.DRKEoRFhcl7
  Parent ID: +Y+h.mcsZ0a690T4
  SysFS ID: /block/hdg
  SysFS BusID: 3.0
  SysFS Device Link: /devices/pci0000:00/0000:00:11.1/ide3/3.0
  Hardware Class: cdrom
  Model: "LITE-ON LTR-48125W"
  Vendor: "LITE-ON"
  Device: "LTR-48125W"
  Revision: "VS0B"
  Serial ID: ""
  Driver: "VIA_IDE", "ide-cdrom", "ide-cdrom"
  Device File: /dev/hdg
  Device Files: /dev/hdg, /dev/cdrecorder2, /dev/disk/by-path/pci-0000:00:11.1-ide-1:0
  Device Number: block 34:0
  Features: CD-R, CD-RW
  Size: 0 sectors a 512 bytes
  Config Status: cfg=yes, avail=yes, need=no, active=unknown
  Attached to: #8 (IDE interface)
  Drive Speed: 205

Comment 3 Ulrich Derenthal 2005-10-25 08:45:56 UTC

Before running hwinfo --ide, /dev/hdg does not exist.

After that, it exists.

Comment 4 Michael Gross 2005-10-25 09:14:28 UTC

Please don't change the status from NEED to ASSI with BNC-Screening-Bugs because we're NOT the (final) assignees here. Thanks.

This looks like a problem in the IDE-subsystem of the kernel.
Please attach 500 lines of your syslog (uncompressed).

Comment 5 Michael Gross 2005-10-25 12:07:33 UTC

This could also be a problem with the drive itself (buggy firmware or a defect). You might help us by trying out this drive in another machine (with another system) or booting a life-system (like knoppix). If it works flawless there, it is more likely a bug wihtin our system. If it makes problems there either, it's more likely on your side.

You noticed that the drive appears after probing the bus with hwinfo which would indicate that this is a firmware bug. The drive might not identify itself properly at boot-time so that it cannot be found. If you have a another OS installed, you could try it there.

There could be another cause for this problem: Your IDE-Controller which obviously supports 4 IDE-channels. Maby within the BIOS of your system (or this controller) there is an option that might fix this -- Channels 3 and 4 might run in another mode which prevents them from reporting attached drives e.g.
Please have a look there either.

If nothing works and the required information was given, I will redirect this bug.

Comment 6 Ulrich Derenthal 2005-10-25 18:08:41 UTC

I checked the box "This comment provides the needed information. Change the status of this bug back to ASSIGNED." previously -- should I leave the status as NEEDINFO instead?

There is a RAID controller integrated into my board, which does not run in RAID mode but in "normal" IDE mode. The first harddisk and the CD drive are attached to the "usual" onboard controller, and the second and third harddisks are attached to the RAID controller. However, I set the RAID controller as the boot device in my BIOS, so I boot from the second harddisk. This seems to cause the "usual" onbord IDE controller to end up as hde to hdh.

With Knoppix 3.4 (c't edition) and its Kernel 2.6, the CD drive seems to work without problems.

The Yast CD configuration module does not start at all at the moment. Maybe this has todo with the installation of yast2-hardware-detection, which was not installed by default earlier.

tail -n 500 /var/log/messages
Oct 25 10:59:01 linux /usr/sbin/cron[6430]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
Oct 25 10:59:24 linux kdm: :0[5733]: pam_unix2: session finished for user uli, service xdm-np
Oct 25 10:59:25 linux init: Switching to runlevel: 0
Oct 25 10:59:26 linux gconfd (uli-6067): Signal 15 erhalten, ordungsgemäßes Herunterfahren
Oct 25 10:59:26 linux gconfd (uli-6067): Beenden
Oct 25 10:59:31 linux kernel: bootsplash: status on console 0 changed to on
Oct 25 10:59:33 linux last message repeated 2 times
Oct 25 10:59:34 linux sshd[4343]: Received signal 15; terminating.
Oct 25 10:59:34 linux nmbd[4479]: [2005/10/25 10:59:34, 0] nmbd/nmbd.c:terminate(58)
Oct 25 10:59:34 linux nmbd[4479]:   Got SIGTERM: going down...
Oct 25 10:59:34 linux xinetd[4674]: Exiting...
Oct 25 10:59:35 linux kernel: Kernel logging (proc) stopped.
Oct 25 10:59:35 linux kernel: Kernel log daemon terminating.
Oct 25 10:59:36 linux exiting on signal 15
Oct 25 19:28:53 linux syslogd 1.4.1: restart.
Oct 25 19:28:53 linux nmbd[4294]: [2005/10/25 19:28:53, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:28:53 linux nmbd[4294]:   Unknown parameter encountered: "character set"
Oct 25 19:28:53 linux nmbd[4294]: [2005/10/25 19:28:53, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:28:53 linux nmbd[4294]:   Ignoring unknown parameter "character set"
Oct 25 19:28:53 linux nmbd[4294]: [2005/10/25 19:28:53, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:28:53 linux nmbd[4294]:   Unknown parameter encountered: "client code page"
Oct 25 19:28:53 linux nmbd[4294]: [2005/10/25 19:28:53, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:28:53 linux nmbd[4294]:   Ignoring unknown parameter "client code page"
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=26]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-udp] [line=13]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=14]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=11]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=16]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-udp] [line=13]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=14]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [line=13]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/fam [file=/etc/xinetd.d/fam] [line=14]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/glftpd [file=/etc/xinetd.d/glftpd] [line=16]
Oct 25 19:28:55 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/netstat [file=/etc/xinetd.d/netstat] [line=16]
Oct 25 19:28:55 linux smbd[4509]: [2005/10/25 19:28:55, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:28:55 linux smbd[4509]:   Unknown parameter encountered: "character set"
Oct 25 19:28:55 linux smbd[4509]: [2005/10/25 19:28:55, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:28:55 linux smbd[4509]:   Ignoring unknown parameter "character set"
Oct 25 19:28:55 linux smbd[4509]: [2005/10/25 19:28:55, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:28:55 linux smbd[4509]:   Unknown parameter encountered: "client code page"
Oct 25 19:28:55 linux smbd[4509]: [2005/10/25 19:28:55, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:28:55 linux smbd[4509]:   Ignoring unknown parameter "client code page"
Oct 25 19:28:56 linux /usr/sbin/cron[4559]: (CRON) STARTUP (V5.0)
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=16]
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/sane-port [file=/etc/xinetd.d/sane-port] [line=12]
Oct 25 19:28:56 linux smbd[4509]: [2005/10/25 19:28:56, 0] printing/print_cups.c:cups_cache_reload(85)
Oct 25 19:28:56 linux smbd[4509]:   Unable to connect to CUPS server localhost - Connection refused
Oct 25 19:28:56 linux smbd[4509]: [2005/10/25 19:28:56, 0] printing/print_cups.c:cups_cache_reload(85)
Oct 25 19:28:56 linux smbd[4509]:   Unable to connect to CUPS server localhost - Connection refused
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/servers [file=/etc/xinetd.d/servers] [line=14]
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/services [file=/etc/xinetd.d/services] [line=13]
Oct 25 19:28:56 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=13]
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/systat [file=/etc/xinetd.d/systat] [line=12]
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=17]
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [line=14]
Oct 25 19:28:56 linux xinetd[4515]: Reading included configuration file: /etc/xinetd.d/vnc [file=/etc/xinetd.d/vnc] [line=14]
Oct 25 19:28:56 linux xinetd[4515]: removing chargen
Oct 25 19:28:56 linux xinetd[4515]: removing chargen
Oct 25 19:28:56 linux xinetd[4515]: removing printer
Oct 25 19:28:56 linux xinetd[4515]: removing cvspserver
Oct 25 19:28:56 linux xinetd[4515]: removing daytime
Oct 25 19:28:56 linux xinetd[4515]: removing daytime
Oct 25 19:28:56 linux xinetd[4515]: removing echo
Oct 25 19:28:56 linux xinetd[4515]: removing echo
Oct 25 19:28:56 linux xinetd[4515]: removing fam
Oct 25 19:28:56 linux xinetd[4515]: removing netstat
Oct 25 19:28:56 linux xinetd[4515]: removing rsync
Oct 25 19:28:56 linux xinetd[4515]: removing sane-port
Oct 25 19:28:56 linux xinetd[4515]: removing servers
Oct 25 19:28:56 linux xinetd[4515]: removing services
Oct 25 19:28:56 linux xinetd[4515]: removing swat
Oct 25 19:28:56 linux xinetd[4515]: removing systat
Oct 25 19:28:56 linux xinetd[4515]: removing time
Oct 25 19:28:56 linux xinetd[4515]: removing time
Oct 25 19:28:56 linux xinetd[4515]: removing vnc1
Oct 25 19:28:56 linux xinetd[4515]: removing vnc2
Oct 25 19:28:56 linux xinetd[4515]: removing vnc3
Oct 25 19:28:56 linux xinetd[4515]: removing vnchttpd1
Oct 25 19:28:56 linux xinetd[4515]: removing vnchttpd2
Oct 25 19:28:56 linux xinetd[4515]: removing vnchttpd3
Oct 25 19:28:56 linux xinetd[4515]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Oct 25 19:28:56 linux xinetd[4515]: Started working: 1 available service
Oct 25 19:28:58 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: parport: PnPBIOS parport detected.
Oct 25 19:28:58 linux kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 25 19:28:58 linux kernel: parport0: Printer, HEWLETT-PACKARD DESKJET 880C
Oct 25 19:28:58 linux kernel: lp0: using parport0 (interrupt-driven).
Oct 25 19:28:58 linux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 25 19:28:58 linux kernel: shpchp: shpc_init : shpc_cap_offset == 0
Oct 25 19:28:58 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 25 19:28:58 linux kernel: usbcore: registered new driver usbfs
Oct 25 19:28:58 linux kernel: usbcore: registered new driver hub
Oct 25 19:28:58 linux kernel: USB Universal Host Controller Interface driver v2.3
Oct 25 19:28:58 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:11.2: UHCI Host Controller
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:11.2: irq 10, io base 0x0000d400
Oct 25 19:28:58 linux kernel: hub 1-0:1.0: USB hub found
Oct 25 19:28:58 linux kernel: hub 1-0:1.0: 2 ports detected
Oct 25 19:28:58 linux kernel: Linux agpgart interface v0.101 (c) Dave Jones
Oct 25 19:28:58 linux kernel: agpgart: Detected VIA KT266/KY266x/KT333 chipset
Oct 25 19:28:58 linux kernel: agpgart: AGP aperture is 128M @ 0xe0000000
Oct 25 19:28:58 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:11.3: UHCI Host Controller
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:11.3: irq 10, io base 0x0000d000
Oct 25 19:28:58 linux kernel: hub 2-0:1.0: USB hub found
Oct 25 19:28:58 linux kernel: hub 2-0:1.0: 2 ports detected
Oct 25 19:28:58 linux kernel: Linux video capture interface: v1.00
Oct 25 19:28:58 linux kernel: ivtv_tveeprom: module not supported by Novell, setting U taint flag.
Oct 25 19:28:58 linux kernel: bttv: driver version 0.9.16 loaded
Oct 25 19:28:58 linux kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 25 19:28:58 linux kernel: bttv: Bt8xx card found (0).
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 10, latency: 32, mmio: 0xdddff000
Oct 25 19:28:58 linux kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Oct 25 19:28:58 linux kernel: bttv0: using: Hauppauge (bt878) [card=10,insmod option]
Oct 25 19:28:58 linux kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Oct 25 19:28:58 linux kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Oct 25 19:28:58 linux kernel: i2c-algo-bit.o: (0) scl=1, sda=1
Oct 25 19:28:58 linux kernel: i2c-algo-bit.o: (1) scl=1, sda=0
Oct 25 19:28:58 linux kernel: i2c-algo-bit.o: (2) scl=1, sda=1
Oct 25 19:28:58 linux kernel: i2c-algo-bit.o: (3) scl=0, sda=1
Oct 25 19:28:58 linux kernel: i2c-algo-bit.o: (4) scl=1, sda=1
Oct 25 19:28:58 linux kernel: i2c-algo-bit.o: bt878 #0 [sw] passed test.
Oct 25 19:28:58 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:14.0: UHCI Host Controller
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:14.0: irq 10, io base 0x0000c800
Oct 25 19:28:58 linux kernel: hub 3-0:1.0: USB hub found
Oct 25 19:28:58 linux kernel: hub 3-0:1.0: 2 ports detected
Oct 25 19:28:58 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:14.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:14.1: UHCI Host Controller
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 4
Oct 25 19:28:58 linux kernel: uhci_hcd 0000:00:14.1: irq 10, io base 0x0000c400
Oct 25 19:28:58 linux kernel: hub 4-0:1.0: USB hub found
Oct 25 19:28:58 linux kernel: hub 4-0:1.0: 2 ports detected
Oct 25 19:28:58 linux kernel: tveeprom: Hauppauge: model = 44354, rev = C342, serial# = 2628982
Oct 25 19:28:58 linux kernel: tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
Oct 25 19:28:58 linux kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
Oct 25 19:28:58 linux kernel: tveeprom: audio_processor = MSP3415 (type = 6)
Oct 25 19:28:58 linux kernel: tveeprom: Hauppauge: model = 44354, rev = C342, serial# = 2628982
Oct 25 19:28:58 linux kernel: tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
Oct 25 19:28:58 linux kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
Oct 25 19:28:58 linux kernel: tveeprom: audio_processor = MSP3415 (type = 6)
Oct 25 19:28:58 linux kernel: bttv0: using tuner=20
Oct 25 19:28:58 linux kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Oct 25 19:28:58 linux kernel: msp34xx: init: chip=MSP3415G-B8 +nicam +simple +simpler +radio mode=simpler
Oct 25 19:28:58 linux kernel: msp34xxg: daemon started
Oct 25 19:28:58 linux kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Oct 25 19:28:58 linux kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Oct 25 19:28:58 linux kernel: tvaudio: TV audio decoder + audio/video mux driver
Oct 25 19:28:58 linux kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
Oct 25 19:28:58 linux kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not found
Oct 25 19:28:58 linux kernel:  : chip found @ 0xc2 (bt878 #0 [sw])
Oct 25 19:28:58 linux kernel: tuner 0-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
Oct 25 19:28:58 linux kernel: bttv0: registered device video0
Oct 25 19:28:58 linux kernel: bttv0: registered device vbi0
Oct 25 19:28:58 linux kernel: bttv0: registered device radio0
Oct 25 19:28:58 linux kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: btaudio: driver version 0.7 loaded [digital+analog]
Oct 25 19:28:58 linux kernel: bt878: AUDIO driver version 0.0.0 loaded
Oct 25 19:28:58 linux kernel: NET: Registered protocol family 23
Oct 25 19:28:58 linux kernel: via_ircc: module not supported by Novell, setting U taint flag.
Oct 25 19:28:58 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:14.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: ehci_hcd 0000:00:14.2: EHCI Host Controller
Oct 25 19:28:58 linux kernel: ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 5
Oct 25 19:28:58 linux kernel: ehci_hcd 0000:00:14.2: irq 10, io mem 0xdfff7e00
Oct 25 19:28:58 linux kernel: ehci_hcd 0000:00:14.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
Oct 25 19:28:58 linux kernel: hub 5-0:1.0: USB hub found
Oct 25 19:28:58 linux kernel: hub 5-0:1.0: 4 ports detected
Oct 25 19:28:58 linux kernel: 8139too Fast Ethernet driver 0.9.27
Oct 25 19:28:58 linux kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:28:58 linux kernel: eth0: RealTek RTL8139 at 0xe1802f00, 00:20:ed:3c:79:63, IRQ 10
Oct 25 19:28:58 linux kernel: eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Oct 25 19:28:58 linux kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Oct 25 19:28:58 linux kernel: ide: failed opcode was: unknown
Oct 25 19:28:58 linux kernel: hda: drive not ready for command
Oct 25 19:28:58 linux kernel: bootsplash: status on console 0 changed to on
Oct 25 19:28:58 linux kernel: lirc_dev: module not supported by Novell, setting U taint flag.
Oct 25 19:28:58 linux kernel: lirc_dev: IR Remote Control driver registered, at major 60
Oct 25 19:28:58 linux kernel: lirc_i2c: module not supported by Novell, setting U taint flag.
Oct 25 19:28:58 linux kernel: ivtv: module not supported by Novell, setting U taint flag.
Oct 25 19:28:58 linux kernel: ivtv: ==================== START INIT IVTV ====================
Oct 25 19:28:58 linux kernel: ivtv: version 0.3.7 (c) loading
Oct 25 19:28:58 linux kernel: ivtv: Linux version: 2.6.13.3-2-default 586 REGPARM gcc-4.0
Oct 25 19:28:58 linux kernel: ivtv: In case of problems please include the debug info
Oct 25 19:28:58 linux kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Oct 25 19:28:58 linux kernel: ivtv: mailing the ivtv-devel mailinglist.
Oct 25 19:28:58 linux kernel: ivtv: ====================  END INIT IVTV  ====================
Oct 25 19:28:58 linux kernel: cx2388x v4l2 driver version 0.0.5 loaded
Oct 25 19:28:58 linux kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Oct 25 19:28:58 linux kernel: lirc_dev: lirc_register_plugin: sample_rate: 10
Oct 25 19:28:58 linux kernel: it87: Found IT8705F chip at 0x290, revision 2
Oct 25 19:28:58 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Oct 25 19:28:58 linux kernel: it87 2-0290: Detected broken BIOS defaults, disabling PWM interface
Oct 25 19:28:58 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 25 19:28:58 linux kernel: NET: Registered protocol family 17
Oct 25 19:28:58 linux kernel: NET: Registered protocol family 10
Oct 25 19:28:58 linux kernel: Disabled Privacy Extensions on device c036c920(lo)
Oct 25 19:28:58 linux kernel: IPv6 over IPv4 tunneling driver
Oct 25 19:28:58 linux kernel: ACPI: Power Button (FF) [PWRF]
Oct 25 19:28:58 linux kernel: ACPI: Power Button (CM) [PWRB]
Oct 25 19:28:58 linux kernel: lp0: ECP mode
Oct 25 19:28:58 linux last message repeated 2 times
Oct 25 19:28:58 linux kernel: powernow-k8: Processor cpuid 662 not supported
Oct 25 19:28:58 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
Oct 25 19:28:58 linux rcpowersaved: enter 'CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Oct 25 19:28:58 linux rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available
Oct 25 19:28:58 linux ifup: No configuration found for sit0
Oct 25 19:28:58 linux kernel: bootsplash: status on console 0 changed to on
Oct 25 19:28:58 linux [powersave]: ERROR (CPUFreq_Kernel:20) Can not set ondemand governor, maybe your cpufreq driver is too slow.
Oct 25 19:28:58 linux [powersave]: ERROR (CPUFreq_Kernel:21) Try CPUFREQ_CONTROL=userspace in /etc/sysconfig/powersave/cpufreq.
Oct 25 19:28:58 linux [powersave]: ERROR (PM_Interface:70) Cannot create cpufreq objects
Oct 25 19:28:59 linux kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Oct 25 19:28:59 linux kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
Oct 25 19:28:59 linux kernel: ide: failed opcode was: 0xef
Oct 25 19:28:59 linux [powersave-set_disk_settings][4805]: WARNING: hdparm returned error '5'
Oct 25 19:29:00 linux hal-subfs-mount[5091]: By hald-subfs-mount created dir /media/floppy got removed.
Oct 25 19:29:00 linux hal-subfs-mount[5091]: MOUNTPOINT:: /media/floppy
Oct 25 19:29:00 linux kernel: subfs 0.9
Oct 25 19:29:00 linux hal-subfs-mount[5091]: Collected mount options and Called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec /dev/fd0 "/media/floppy"
Oct 25 19:29:01 linux kernel: end_request: I/O error, dev fd0, sector 0
Oct 25 19:29:01 linux last message repeated 2 times
Oct 25 19:29:01 linux submountd: mount failure, No such device or address
Oct 25 19:29:01 linux kernel: end_request: I/O error, dev fd0, sector 0
Oct 25 19:29:01 linux kernel: subfs: unsuccessful attempt to mount media (256)
Oct 25 19:29:03 linux kernel: eth0: no IPv6 routers present
Oct 25 19:30:07 linux su: (to nobody) root on none
Oct 25 19:30:08 linux last message repeated 2 times
Oct 25 19:30:12 linux init: Switching to runlevel: 6
Oct 25 19:30:12 linux su: (to nobody) root on none
Oct 25 19:30:12 linux su: (to nobody) root on none
Oct 25 19:30:18 linux kernel: bootsplash: status on console 0 changed to on
Oct 25 19:30:18 linux kernel: bootsplash: status on console 0 changed to on
Oct 25 19:30:21 linux nmbd[4343]: [2005/10/25 19:30:21, 0] nmbd/nmbd.c:terminate(58)
Oct 25 19:30:21 linux nmbd[4343]:   Got SIGTERM: going down...
Oct 25 19:30:21 linux sshd[4197]: Received signal 15; terminating.
Oct 25 19:30:21 linux xinetd[4515]: Exiting...
Oct 25 19:30:22 linux kernel: Kernel logging (proc) stopped.
Oct 25 19:30:22 linux kernel: Kernel log daemon terminating.
Oct 25 19:30:23 linux exiting on signal 15
Oct 25 19:47:12 linux syslogd 1.4.1: restart.
Oct 25 19:47:14 linux nmbd[4418]: [2005/10/25 19:47:14, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:47:14 linux nmbd[4418]:   Unknown parameter encountered: "character set"
Oct 25 19:47:14 linux nmbd[4418]: [2005/10/25 19:47:14, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:47:14 linux nmbd[4418]:   Ignoring unknown parameter "character set"
Oct 25 19:47:14 linux nmbd[4418]: [2005/10/25 19:47:14, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:47:14 linux nmbd[4418]:   Unknown parameter encountered: "client code page"
Oct 25 19:47:14 linux nmbd[4418]: [2005/10/25 19:47:14, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:47:14 linux nmbd[4418]:   Ignoring unknown parameter "client code page"
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=26]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-udp] [line=13]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=14]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=11]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=16]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-udp] [line=13]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=14]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [line=13]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/fam [file=/etc/xinetd.d/fam] [line=14]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/glftpd [file=/etc/xinetd.d/glftpd] [line=16]
Oct 25 19:47:15 linux /usr/sbin/cron[4663]: (CRON) STARTUP (V5.0)
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/netstat [file=/etc/xinetd.d/netstat] [line=16]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=16]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/sane-port [file=/etc/xinetd.d/sane-port] [line=12]
Oct 25 19:47:15 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/servers [file=/etc/xinetd.d/servers] [line=14]
Oct 25 19:47:16 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/services [file=/etc/xinetd.d/services] [line=13]
Oct 25 19:47:16 linux smbd[4593]: [2005/10/25 19:47:16, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:47:16 linux smbd[4593]:   Unknown parameter encountered: "character set"
Oct 25 19:47:16 linux smbd[4593]: [2005/10/25 19:47:16, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:47:16 linux smbd[4593]:   Ignoring unknown parameter "character set"
Oct 25 19:47:16 linux smbd[4593]: [2005/10/25 19:47:16, 0] param/loadparm.c:map_parameter(2542)
Oct 25 19:47:16 linux smbd[4593]:   Unknown parameter encountered: "client code page"
Oct 25 19:47:16 linux smbd[4593]: [2005/10/25 19:47:16, 0] param/loadparm.c:lp_do_parameter(3283)
Oct 25 19:47:16 linux smbd[4593]:   Ignoring unknown parameter "client code page"
Oct 25 19:47:16 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=13]
Oct 25 19:47:16 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/systat [file=/etc/xinetd.d/systat] [line=12]
Oct 25 19:47:16 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=17]
Oct 25 19:47:16 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [line=14]
Oct 25 19:47:16 linux xinetd[4631]: Reading included configuration file: /etc/xinetd.d/vnc [file=/etc/xinetd.d/vnc] [line=14]
Oct 25 19:47:16 linux xinetd[4631]: removing chargen
Oct 25 19:47:16 linux xinetd[4631]: removing chargen
Oct 25 19:47:16 linux xinetd[4631]: removing printer
Oct 25 19:47:16 linux xinetd[4631]: removing cvspserver
Oct 25 19:47:16 linux xinetd[4631]: removing daytime
Oct 25 19:47:16 linux xinetd[4631]: removing daytime
Oct 25 19:47:16 linux xinetd[4631]: removing echo
Oct 25 19:47:16 linux xinetd[4631]: removing echo
Oct 25 19:47:16 linux xinetd[4631]: removing fam
Oct 25 19:47:16 linux xinetd[4631]: removing netstat
Oct 25 19:47:16 linux xinetd[4631]: removing rsync
Oct 25 19:47:16 linux xinetd[4631]: removing sane-port
Oct 25 19:47:16 linux xinetd[4631]: removing servers
Oct 25 19:47:16 linux xinetd[4631]: removing services
Oct 25 19:47:16 linux xinetd[4631]: removing swat
Oct 25 19:47:16 linux xinetd[4631]: removing systat
Oct 25 19:47:16 linux xinetd[4631]: removing time
Oct 25 19:47:16 linux xinetd[4631]: removing time
Oct 25 19:47:16 linux xinetd[4631]: removing vnc1
Oct 25 19:47:16 linux xinetd[4631]: removing vnc2
Oct 25 19:47:16 linux xinetd[4631]: removing vnc3
Oct 25 19:47:16 linux xinetd[4631]: removing vnchttpd1
Oct 25 19:47:16 linux xinetd[4631]: removing vnchttpd2
Oct 25 19:47:16 linux xinetd[4631]: removing vnchttpd3
Oct 25 19:47:16 linux xinetd[4631]: xinetd Version 2.3.13 started with libwrap loadavg options compiled in.
Oct 25 19:47:16 linux xinetd[4631]: Started working: 1 available service
Oct 25 19:47:16 linux smbd[4593]: [2005/10/25 19:47:16, 0] printing/print_cups.c:cups_cache_reload(85)
Oct 25 19:47:16 linux smbd[4593]:   Unable to connect to CUPS server localhost - Connection refused
Oct 25 19:47:16 linux smbd[4593]: [2005/10/25 19:47:16, 0] printing/print_cups.c:cups_cache_reload(85)
Oct 25 19:47:16 linux smbd[4593]:   Unable to connect to CUPS server localhost - Connection refused
Oct 25 19:47:16 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
Oct 25 19:47:17 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: parport: PnPBIOS parport detected.
Oct 25 19:47:17 linux kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 25 19:47:17 linux kernel: parport0: Printer, HEWLETT-PACKARD DESKJET 880C
Oct 25 19:47:17 linux kernel: lp0: using parport0 (interrupt-driven).
Oct 25 19:47:17 linux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 25 19:47:17 linux kernel: shpchp: shpc_init : shpc_cap_offset == 0
Oct 25 19:47:17 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 25 19:47:17 linux kernel: Linux video capture interface: v1.00
Oct 25 19:47:17 linux kernel: ivtv_tveeprom: module not supported by Novell, setting U taint flag.
Oct 25 19:47:17 linux kernel: bttv: driver version 0.9.16 loaded
Oct 25 19:47:17 linux kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
Oct 25 19:47:17 linux kernel: bttv: Bt8xx card found (0).
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 10, latency: 32, mmio: 0xdddff000
Oct 25 19:47:17 linux kernel: bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
Oct 25 19:47:17 linux kernel: bttv0: using: Hauppauge (bt878) [card=10,insmod option]
Oct 25 19:47:17 linux kernel: bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
Oct 25 19:47:17 linux kernel: bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
Oct 25 19:47:17 linux kernel: i2c-algo-bit.o: (0) scl=1, sda=1
Oct 25 19:47:17 linux kernel: i2c-algo-bit.o: (1) scl=1, sda=0
Oct 25 19:47:17 linux kernel: i2c-algo-bit.o: (2) scl=1, sda=1
Oct 25 19:47:17 linux kernel: i2c-algo-bit.o: (3) scl=0, sda=1
Oct 25 19:47:17 linux kernel: i2c-algo-bit.o: (4) scl=1, sda=1
Oct 25 19:47:17 linux kernel: i2c-algo-bit.o: bt878 #0 [sw] passed test.
Oct 25 19:47:17 linux kernel: Linux agpgart interface v0.101 (c) Dave Jones
Oct 25 19:47:17 linux kernel: agpgart: Detected VIA KT266/KY266x/KT333 chipset
Oct 25 19:47:17 linux kernel: agpgart: AGP aperture is 128M @ 0xe0000000
Oct 25 19:47:17 linux kernel: tveeprom: Hauppauge: model = 44354, rev = C342, serial# = 2628982
Oct 25 19:47:17 linux kernel: tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
Oct 25 19:47:17 linux kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
Oct 25 19:47:17 linux kernel: tveeprom: audio_processor = MSP3415 (type = 6)
Oct 25 19:47:17 linux kernel: tveeprom: Hauppauge: model = 44354, rev = C342, serial# = 2628982
Oct 25 19:47:17 linux kernel: tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
Oct 25 19:47:17 linux kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
Oct 25 19:47:17 linux kernel: tveeprom: audio_processor = MSP3415 (type = 6)
Oct 25 19:47:17 linux kernel: bttv0: using tuner=20
Oct 25 19:47:17 linux kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Oct 25 19:47:17 linux kernel: msp34xx: init: chip=MSP3415G-B8 +nicam +simple +simpler +radio mode=simpler
Oct 25 19:47:17 linux kernel: msp34xxg: daemon started
Oct 25 19:47:17 linux kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Oct 25 19:47:17 linux kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Oct 25 19:47:17 linux kernel: tvaudio: TV audio decoder + audio/video mux driver
Oct 25 19:47:17 linux kernel: tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
Oct 25 19:47:17 linux kernel: bttv0: i2c: checking for TDA9887 @ 0x86... not found
Oct 25 19:47:17 linux kernel:  : chip found @ 0xc2 (bt878 #0 [sw])
Oct 25 19:47:17 linux kernel: tuner 0-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
Oct 25 19:47:17 linux kernel: bttv0: registered device video0
Oct 25 19:47:17 linux kernel: bttv0: registered device vbi0
Oct 25 19:47:17 linux kernel: bttv0: registered device radio0
Oct 25 19:47:17 linux kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Oct 25 19:47:17 linux kernel: usbcore: registered new driver usbfs
Oct 25 19:47:17 linux kernel: usbcore: registered new driver hub
Oct 25 19:47:17 linux kernel: USB Universal Host Controller Interface driver v2.3
Oct 25 19:47:17 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:11.2: UHCI Host Controller
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:11.2: irq 10, io base 0x0000d400
Oct 25 19:47:17 linux kernel: hub 1-0:1.0: USB hub found
Oct 25 19:47:17 linux kernel: hub 1-0:1.0: 2 ports detected
Oct 25 19:47:17 linux kernel: NET: Registered protocol family 23
Oct 25 19:47:17 linux kernel: via_ircc: module not supported by Novell, setting U taint flag.
Oct 25 19:47:17 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:47:17 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:11.3: UHCI Host Controller
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:11.3: irq 10, io base 0x0000d000
Oct 25 19:47:17 linux kernel: hub 2-0:1.0: USB hub found
Oct 25 19:47:17 linux kernel: hub 2-0:1.0: 2 ports detected
Oct 25 19:47:17 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:14.0: UHCI Host Controller
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:14.0: irq 10, io base 0x0000c800
Oct 25 19:47:17 linux kernel: hub 3-0:1.0: USB hub found
Oct 25 19:47:17 linux kernel: hub 3-0:1.0: 2 ports detected
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: btaudio: driver version 0.7 loaded [digital+analog]
Oct 25 19:47:17 linux kernel: bt878: AUDIO driver version 0.0.0 loaded
Oct 25 19:47:17 linux kernel:     ACPI-0212: *** Warning: Device is not power manageable
Oct 25 19:47:17 linux kernel: 8139too Fast Ethernet driver 0.9.27
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: eth0: RealTek RTL8139 at 0xe175cf00, 00:20:ed:3c:79:63, IRQ 10
Oct 25 19:47:17 linux kernel: eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:14.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:14.1: UHCI Host Controller
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 4
Oct 25 19:47:17 linux kernel: uhci_hcd 0000:00:14.1: irq 10, io base 0x0000c400
Oct 25 19:47:17 linux kernel: hub 4-0:1.0: USB hub found
Oct 25 19:47:17 linux kernel: hub 4-0:1.0: 2 ports detected
Oct 25 19:47:17 linux kernel: ACPI: PCI Interrupt 0000:00:14.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Oct 25 19:47:17 linux kernel: ehci_hcd 0000:00:14.2: EHCI Host Controller
Oct 25 19:47:17 linux kernel: ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 5
Oct 25 19:47:17 linux kernel: ehci_hcd 0000:00:14.2: irq 10, io mem 0xdfff7e00
Oct 25 19:47:17 linux kernel: ehci_hcd 0000:00:14.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
Oct 25 19:47:17 linux kernel: hub 5-0:1.0: USB hub found
Oct 25 19:47:17 linux kernel: hub 5-0:1.0: 4 ports detected
Oct 25 19:47:17 linux kernel: hda: CHECK for good STATUS
Oct 25 19:47:17 linux kernel: lirc_dev: module not supported by Novell, setting U taint flag.
Oct 25 19:47:17 linux kernel: lirc_dev: IR Remote Control driver registered, at major 60
Oct 25 19:47:17 linux kernel: lirc_i2c: module not supported by Novell, setting U taint flag.
Oct 25 19:47:17 linux kernel: ivtv: module not supported by Novell, setting U taint flag.
Oct 25 19:47:17 linux kernel: ivtv: ==================== START INIT IVTV ====================
Oct 25 19:47:17 linux kernel: ivtv: version 0.3.7 (c) loading
Oct 25 19:47:17 linux kernel: ivtv: Linux version: 2.6.13.3-2-default 586 REGPARM gcc-4.0
Oct 25 19:47:17 linux kernel: ivtv: In case of problems please include the debug info
Oct 25 19:47:17 linux kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Oct 25 19:47:17 linux kernel: ivtv: mailing the ivtv-devel mailinglist.
Oct 25 19:47:17 linux kernel: ivtv: ====================  END INIT IVTV  ====================
Oct 25 19:47:17 linux kernel: cx2388x v4l2 driver version 0.0.5 loaded
Oct 25 19:47:17 linux kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Oct 25 19:47:17 linux kernel: lirc_dev: lirc_register_plugin: sample_rate: 10
Oct 25 19:47:17 linux kernel: it87: Found IT8705F chip at 0x290, revision 2
Oct 25 19:47:17 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Oct 25 19:47:17 linux kernel: it87 2-0290: Detected broken BIOS defaults, disabling PWM interface
Oct 25 19:47:17 linux kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 25 19:47:17 linux kernel: NET: Registered protocol family 17
Oct 25 19:47:17 linux kernel: NET: Registered protocol family 10
Oct 25 19:47:17 linux kernel: Disabled Privacy Extensions on device c036c920(lo)
Oct 25 19:47:17 linux kernel: IPv6 over IPv4 tunneling driver
Oct 25 19:47:17 linux kernel: ACPI: Power Button (FF) [PWRF]
Oct 25 19:47:17 linux kernel: ACPI: Power Button (CM) [PWRB]
Oct 25 19:47:17 linux kernel: lp0: ECP mode
Oct 25 19:47:17 linux last message repeated 2 times
Oct 25 19:47:17 linux kernel: powernow-k8: Processor cpuid 662 not supported
Oct 25 19:47:17 linux rcpowersaved: CPU frequency scaling is not supported by your processor.
Oct 25 19:47:17 linux rcpowersaved: enter 'CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
Oct 25 19:47:17 linux rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available
Oct 25 19:47:18 linux kernel: bootsplash: status on console 0 changed to on
Oct 25 19:47:18 linux ifup: No configuration found for sit0
Oct 25 19:47:19 linux [powersave]: ERROR (CPUFreq_Kernel:20) Can not set ondemand governor, maybe your cpufreq driver is too slow.
Oct 25 19:47:19 linux [powersave]: ERROR (CPUFreq_Kernel:21) Try CPUFREQ_CONTROL=userspace in /etc/sysconfig/powersave/cpufreq.
Oct 25 19:47:19 linux [powersave]: ERROR (PM_Interface:70) Cannot create cpufreq objects
Oct 25 19:47:19 linux kernel: hde: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Oct 25 19:47:19 linux kernel: hde: drive_cmd: error=0x04 { DriveStatusError }
Oct 25 19:47:19 linux kernel: ide: failed opcode was: 0xef
Oct 25 19:47:19 linux [powersave-set_disk_settings][5008]: WARNING: hdparm returned error '5'
Oct 25 19:47:20 linux hal-subfs-mount[5229]: By hald-subfs-mount created dir /media/floppy got removed.
Oct 25 19:47:20 linux hal-subfs-mount[5229]: MOUNTPOINT:: /media/floppy
Oct 25 19:47:20 linux kernel: subfs 0.9
Oct 25 19:47:20 linux hal-subfs-mount[5229]: Collected mount options and Called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec /dev/fd0 "/media/floppy"
Oct 25 19:47:20 linux kernel: end_request: I/O error, dev fd0, sector 0
Oct 25 19:47:20 linux last message repeated 2 times
Oct 25 19:47:20 linux submountd: mount failure, No such device or address
Oct 25 19:47:20 linux kernel: end_request: I/O error, dev fd0, sector 0
Oct 25 19:47:20 linux kernel: subfs: unsuccessful attempt to mount media (256)
Oct 25 19:47:23 linux kernel: eth0: no IPv6 routers present
Oct 25 19:48:41 linux smbd[5574]: [2005/10/25 19:48:41, 0] lib/util_sock.c:read_data(526)
Oct 25 19:48:41 linux smbd[5574]:   read_data: read failure for 4 bytes to client 84.132.60.105. Error = Connection reset by peer
Oct 25 19:51:21 linux init: Switching to runlevel: 5
Oct 25 19:51:21 linux kernel: Kernel logging (proc) stopped.
Oct 25 19:51:21 linux kernel: Kernel log daemon terminating.
Oct 25 19:51:22 linux exiting on signal 15
Oct 25 19:51:22 linux syslogd 1.4.1: restart.
Oct 25 19:51:27 linux kdm: :0[5854]: pam_unix2: session started for user uli, service xdm-np
Oct 25 19:51:27 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 25 19:51:33 linux modprobe: FATAL: Error inserting sonypi (/lib/modules/2.6.13.3-2-default/kernel/drivers/char/sonypi.ko): No such device
Oct 25 19:53:01 linux nmbd[4556]: [2005/10/25 19:53:01, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
Oct 25 19:53:01 linux nmbd[4556]:   *****
Oct 25 19:53:01 linux nmbd[4556]:
Oct 25 19:53:01 linux nmbd[4556]:   Samba name server ULI2 is now a local master browser for workgroup KOLOSSEUM on subnet 192.168.2.102
Oct 25 19:53:01 linux nmbd[4556]:
Oct 25 19:53:01 linux nmbd[4556]:   *****
Oct 25 19:53:22 linux nmbd[4556]: [2005/10/25 19:53:22, 0] nmbd/nmbd_browsesync.c:find_domain_master_name_query_fail(353)
Oct 25 19:53:22 linux nmbd[4556]:   find_domain_master_name_query_fail:
Oct 25 19:53:22 linux nmbd[4556]:   Unable to find the Domain Master Browser name KOLOSSEUM<1b> for the workgroup KOLOSSEUM.
Oct 25 19:53:22 linux nmbd[4556]:   Unable to sync browse lists in this workgroup.
Oct 25 19:53:57 linux gconfd (uli-6112): (Version 2.12.0) wird gestartet, Prozesskennung 6112, Benutzer »uli«
Oct 25 19:53:57 linux gconfd (uli-6112): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Oct 25 19:53:57 linux gconfd (uli-6112): Die Adresse »xml:readwrite:/home/uli/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Oct 25 19:53:57 linux gconfd (uli-6112): Die Adresse »xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Oct 25 19:55:15 linux su: (to root) uli on /dev/pts/3

Comment 7 Ulrich Derenthal 2005-10-25 18:13:41 UTC

From y2log, when the CD configuration module does not appear:

2005-10-25 20:12:06 <1> linux(6632) [liby2] genericfrontend.cc(main):193 Launched YaST2 component 'y2base'
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(SetLanguage):500 GET encoding for de_DE.UTF-8:  UTF-8
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (CommandLine)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Mode)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Stage)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Report)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Popup)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Label)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Directory)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (String)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Summary)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (TypeRepository)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Address)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Hostname)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (IP)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Netmask)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (URL)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (XML)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (RichText)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Progress)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Wizard)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (SuSERelease)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (AsciiFile)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Partitions)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Arch)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Storage)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Encoding)
2005-10-25 20:12:06 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (FileSystems)
2005-10-25 20:12:06 <1> linux(6632) [Y2Perl] Y2PerlComponent.cc(Y2PerlComponent):35 Creating Y2PerlComponent
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Installation)
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.cc(packageManager):484 Launch PackageManager...
2005-10-25 20:12:07 <1> linux(6632) [packagemanager] PkgDu.cc(newcount):299 --[1]----------------------------
2005-10-25 20:12:07 <1> linux(6632) [packagemanager] PkgDu.cc(newcount):299 ---------------------------------
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.cc(packageManager):486 Created PackageManager @0x826a748
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.cc(selectionManager):505 Launch SelectionManager...
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.cc(selectionManager):507 Created SelectionManager @0x823b268
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Linuxrc)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Misc)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (HTML)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (StorageDevices)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (HwStatus)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Kernel)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (StorageClients)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (Hotplug)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2WFMComponent.cc(import):695 Y2WFMComponent::import (ModuleLoading)
2005-10-25 20:12:07 <1> linux(6632) [wfm] Y2CCWFM.cc(createInLevel):153 Parsing finished
2005-10-25 20:12:07 <1> linux(6632) [liby2] genericfrontend.cc(main):482 YAST_IS_RUNNING is yes
2005-10-25 20:12:07 <1> linux(6632) [YCP] Encoding.ycp:37 list ["charmap=\"UTF-8\"", ""]
2005-10-25 20:12:07 <1> linux(6632) [YCP] Encoding.ycp:40 list ["charmap=\"UTF-8\""]
2005-10-25 20:12:07 <1> linux(6632) [YCP] Encoding.ycp:44 enc "UTF-8"
2005-10-25 20:12:07 <1> linux(6632) [YCP] Encoding.ycp:46 enc UTF-8
2005-10-25 20:12:07 <1> linux(6632) [YCP] Encoding.ycp:50 encoding UTF-8
2005-10-25 20:12:07 <1> linux(6632) [YCP] FileSystems.ycp:859 support $[`ext2:true, `ext3:true, `jfs:false, `lvm:true, `raid:true, `reiser:true, `vfat:true, `xbootdisk:false, `xbootfat:false, `xfs:true, `xhibernate:true, `xxefi:false]
2005-10-25 20:12:07 <1> linux(6632) [YCP] FileSystems.ycp:864 suggest_m_points:["/home", "/srv", "/tmp", "/local", ""]
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.locale.cc(LocaleSettings):77 $LANG='de_DE.UTF-8'
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.locale.cc(LocaleSettings):89 Preferred locale: 'de_DE'
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.locale.cc(LocaleSettings):90 Fallback locale: 'en'
2005-10-25 20:12:07 <1> linux(6632) [Y2PMrc] Y2PM.rcvalue.cc(rcInit):430 Initialize using: file /var/adm/YaST/y2pm/y2pmrc
2005-10-25 20:12:07 <1> linux(6632) [Y2PMrc++] Y2PM.rcvalue.cc(parse):274 assignstatus == 1
2005-10-25 20:12:07 <1> linux(6632) [Y2PM] Y2PM.cc(setCandidateOrder):142 setCandidateOrder 0
2005-10-25 20:12:08 <1> linux(6632) [YCP] StorageDevices.ycp:366 FloppyDrives [$["bus":"None", "bus_hwcfg":"none", "class_id":262, "dev_name":"/dev/fd0", "dev_names":["/dev/fd0"], "model":"Floppy Disk", "resource":$["size":[$["unit":"sectors", "x":2880, "y":512]]], "sub_class_id":3, "udi":"/org/freedesktop/Hal/devices/computer_storage", "unique_key":"sPPV.oZ89vuho4Y3"]]

Comment 8 Michael Gross 2005-10-27 13:07:37 UTC

Please don't inline large logfiles, use the attach-feature instead. Yes and just don't change the status.

Comment 9 Michael Gross 2005-10-27 13:10:47 UTC

Kay: Could this be something for you?

Comment 10 Kay Sievers 2005-10-29 01:42:44 UTC

Does the cdrom device node exist only sometimes, or is it never
created? In the failing case, could you check:

What does:
  ls -l /sys/block
print?

And "ide-cd" is always loaded?
  /sbin/lsmod

Comment 11 Ulrich Derenthal 2005-10-29 14:33:22 UTC

lsmod|grep ide
video_buf              20996  3 cx8800,cx88xx,bttv
videodev                9216  4 cx8800,cx88xx,ivtv,bttv
ide_disk               17280  10
ide_core              122508  4 generic,via82cxxx,pdc202xx_new,ide_disk

ls -l /sys/block/
insgesamt 0
drwxr-xr-x 3 root root 0 2005-10-29 15:36 fd0
drwxr-xr-x 7 root root 0 2005-10-29 15:36 hda
drwxr-xr-x 4 root root 0 2005-10-29 15:36 hdc
drwxr-xr-x 9 root root 0 2005-10-29 15:36 hde
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop0
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop1
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop2
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop3
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop4
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop5
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop6
drwxr-xr-x 2 root root 0 2005-10-29 17:36 loop7
drwxr-xr-x 2 root root 0 2005-10-29 17:36 md0
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram0
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram1
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram10
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram11
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram12
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram13
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram14
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram15
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram2
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram3
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram4
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram5
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram6
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram7
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram8
drwxr-xr-x 2 root root 0 2005-10-29 17:36 ram9

Now I run hwinfo --ide, and the output changes:

lsmod|grep ide
ide_cd                 39684  1
cdrom                  37024  2 sr_mod,ide_cd
video_buf              20996  3 cx8800,cx88xx,bttv
videodev                9216  4 cx8800,cx88xx,ivtv,bttv
ide_disk               17280  10
ide_core              122508  5 ide_cd,generic,via82cxxx,pdc202xx_new,ide_disk

ls -l /sys/block/
insgesamt 0
drwxr-xr-x 32 root root 0 2005-10-29 16:32 .
drwxr-xr-x 10 root root 0 2005-10-29 17:36 ..
drwxr-xr-x  3 root root 0 2005-10-29 16:32 fd0
drwxr-xr-x  7 root root 0 2005-10-29 16:32 hda
drwxr-xr-x  4 root root 0 2005-10-29 16:32 hdc
drwxr-xr-x  9 root root 0 2005-10-29 16:32 hde
drwxr-xr-x  3 root root 0 2005-10-29 16:32 hdg
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop0
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop1
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop2
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop3
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop4
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop5
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop6
drwxr-xr-x  2 root root 0 2005-10-29 16:32 loop7
drwxr-xr-x  2 root root 0 2005-10-29 16:32 md0
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram0
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram1
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram10
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram11
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram12
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram13
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram14
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram15
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram2
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram3
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram4
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram5
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram6
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram7
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram8
drwxr-xr-x  2 root root 0 2005-10-29 16:32 ram9

Comment 12 Kay Sievers 2005-10-29 15:29:39 UTC

Can you test if putting:
  MODULES_LOADED_ON_BOOT="ide-cd"
in:
  /etc/sysconfig/kernel

makes it working?

Comment 13 Kay Sievers 2005-11-17 20:28:55 UTC


*** This bug has been marked as a duplicate of 133651 ***