Bugzilla – Bug 131709
via rhine network card on km400 does not work on suse10
Last modified: 2005-11-04 09:54:12 UTC
It will work when disable acpi . here is the message: irq 11: nobody cared (try booting with the "irqpoll" option) [<c013c18c>] __report_bad_irq+0x1c/0x70 [<c013c27b>] note_interrupt+0x6b/0xd0 [<c013bd1c>] __do_IRQ+0xbc/0xd0 [<c01055e8>] do_IRQ+0x38/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 [<c0120ba1>] __do_softirq+0x31/0xa0 [<c0120c36>] do_softirq+0x26/0x30 [<c01055ed>] do_IRQ+0x3d/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 handlers: [<cf19e4d0>] (rhine_interrupt+0x0/0x240 [via_rhine]) Disabling IRQ #11 NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timed out, status 1003, PHY status 786d, resetting... eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 irq 11: nobody cared (try booting with the "irqpoll" option) [<c013c18c>] __report_bad_irq+0x1c/0x70 [<c013c27b>] note_interrupt+0x6b/0xd0 [<c013bd1c>] __do_IRQ+0xbc/0xd0 [<c01055e8>] do_IRQ+0x38/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 [<c013bc15>] handle_IRQ_event+0x15/0x60 [<c013bce5>] __do_IRQ+0x85/0xd0 [<c01055e8>] do_IRQ+0x38/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 [<c013bdb5>] enable_irq+0x25/0xa0 [<cf19e265>] rhine_tx_timeout+0x85/0xf0 [via_rhine] [<c029d350>] dev_watchdog+0x0/0x90 [<c029d3d3>] dev_watchdog+0x83/0x90 [<c012443b>] run_timer_softirq+0xab/0x160 [<c0120bb3>] __do_softirq+0x43/0xa0 [<c0120c36>] do_softirq+0x26/0x30 [<c01055ed>] do_IRQ+0x3d/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 [<ce854c17>] acpi_processor_idle+0x10e/0x26f [processor] [<c01010ae>] cpu_idle+0xe/0x50 [<c03ae730>] start_kernel+0x160/0x1b0 handlers: [<cf19e4d0>] (rhine_interrupt+0x0/0x240 [via_rhine]) Disabling IRQ #11 NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timed out, status 1003, PHY status 786d, resetting... eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 irq 11: nobody cared (try booting with the "irqpoll" option) [<c013c18c>] __report_bad_irq+0x1c/0x70 [<c013c27b>] note_interrupt+0x6b/0xd0 [<c013bd1c>] __do_IRQ+0xbc/0xd0 [<c01055e8>] do_IRQ+0x38/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 [<c013bdb5>] enable_irq+0x25/0xa0 [<cf19e265>] rhine_tx_timeout+0x85/0xf0 [via_rhine] [<c029d350>] dev_watchdog+0x0/0x90 [<c029d3d3>] dev_watchdog+0x83/0x90 [<c012443b>] run_timer_softirq+0xab/0x160 [<c0120bb3>] __do_softirq+0x43/0xa0 [<c0120c36>] do_softirq+0x26/0x30 [<c01055ed>] do_IRQ+0x3d/0x60 [<c0103dea>] common_interrupt+0x1a/0x20 [<ce854c17>] acpi_processor_idle+0x10e/0x26f [processor] [<c01010ae>] cpu_idle+0xe/0x50 [<c03ae730>] start_kernel+0x160/0x1b0 handlers: [<cf19e4d0>] (rhine_interrupt+0x0/0x240 [via_rhine]) Disabling IRQ #11 Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! SCSI subsystem initialized st: Version 20050501, fixed bufsize 32768, s/g segs 256
kernel version is 2.6.13-15-default
Created attachment 56082 [details] siga for this notebook
Could you try pci=noacpi, please.
*** This bug has been marked as a duplicate of 66921 ***