10.1 Alpha 3 installation. I was using an Intel MB #D845PEBT2, P4cpu, Pioneer DVD-ROM ATAPIModel DVD-120S, ATAPI CD/DVD-ROM drive. I am using a Microsoft optical intelimouse in a PS2 port.

The wheel works fine scrolling down, but if you roll the wheel even one click up, it will pop up odd windows in Firefox and in Konqueror it pops up the Open with, etc box. Although oddly enough just now when I did it it worked twice and then acted up. 

I am pasting the boot.msg file here in case there is any help for this bug or the previous one(s). 

Inspecting /boot/System.map-2.6.14.2-2-default
Loaded 24366 symbols from /boot/System.map-2.6.14.2-2-default.
Symbols match kernel version 2.6.14.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.14.2-2-default (geeko@buildhost) (gcc version 4.1.0 20051110 (experimental) (SUSE Linux)) #1 Fri Nov 11 10:05:15 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
<4> BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
<4> BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<7>On node 0 totalpages: 130880
<7>  DMA zone: 4096 pages, LIFO batch:1
<7>  Normal zone: 126784 pages, LIFO batch:31
<7>  HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f70e0
<7>ACPI: RSDT (v001 INTEL  D845EBT2 0x20021021 MSFT 0x00000097) @ 0x1ff40000
<7>ACPI: FADT (v002 INTEL  D845EBT2 0x20021021 MSFT 0x00000097) @ 0x1ff40200
<7>ACPI: MADT (v001 INTEL  D845EBT2 0x20021021 MSFT 0x00000097) @ 0x1ff40300
<7>ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @ 0x1ff442f0
<7>ACPI: DSDT (v001 INTEL  D845EBT2 0x0000010a MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x408
<6>ACPI: local apic disabled
<4>Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
<4>Built 1 zonelists
<5>Kernel command line: root=/dev/hda2 vga=0x31a selinux=0    resume=/dev/hda1  splash=silent
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order: 11, 32768 bytes)
<4>Detected 2400.194 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 511992k/523520k available (2008k kernel code, 10872k reserved, 694k data, 204k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 4804.75 BogoMIPS (lpj=9609509)
<6>Security Framework v1.0.0 initialized
<6>SELinux:  Disabled at boot.
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<7>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<6>mtrr: v2.0 (20020519)
<4>CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 2649k freed
<4> not found!
<4>ACPI: setting ELCR to 0200 (from 0eb8)
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
<6>PCI: Using configuration type 1
<6>ACPI: Subsystem revision 20050902
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
<4>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<7>Boot video device is 0000:02:00.0
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
<6>pnp: 00:09: ioport range 0x400-0x47f could not be reserved
<6>pnp: 00:09: ioport range 0x680-0x6ff has been reserved
<6>pnp: 00:09: ioport range 0x480-0x4bf has been reserved
<6>PCI: Bridge: 0000:00:01.0
<6>  IO window: disabled.
<6>  MEM window: fa800000-fa8fffff
<6>  PREFETCH window: ee500000-ee5fffff
<6>PCI: Bridge: 0000:00:1e.0
<6>  IO window: d000-dfff
<6>  MEM window: fa900000-feafffff
<6>  PREFETCH window: ee600000-f26fffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<5>audit(1133985681.208:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 10240k, total 16384k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
<6>vesafb: protected mode interface info at c000:7e6b
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<4>vesafb: Mode is VGA compatible
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
<4>Console: switching to colour frame buffer device 158x59
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: isa0061/input0//class/input as input0
<6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 3.39
<6>NET: Registered protocol family 2
<6>input: AT Translated Set 2 keyboard//class/input as input1
<4>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>TCP established hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<4>Using IPI Shortcut mode
<4>ACPI wakeup devices: 
<4>P0P1 USB0 USB1 USB2 USB3 AC97 SLPB 
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 204k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<6>ICH4: IDE controller at PCI slot 0000:00:1f.1
<4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
<4>PCI: setting IRQ 5 as level-triggered
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
<6>ICH4: chipset revision 2
<6>ICH4: not 100% native mode: will probe irqs later
<6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
<6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
<7>Probing IDE interface ide0...
<4>hda: QUANTUM FIREBALLP AS30.0, ATA DISK drive
<6>input: ImExPS/2 Generic Explorer Mouse//class/input as input2
<4>hdb: Maxtor 92048U8, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 128KiB
<6>hda: 60233564 sectors (30839 MB) w/1902KiB Cache, CHS=59755/16/63, UDMA(100)
<6>hda: cache flushes not supported
<6> hda: hda1 hda2
<6>hdb: max request size: 128KiB
<6>hdb: 40000464 sectors (20480 MB) w/2048KiB Cache, CHS=39683/16/63, UDMA(66)
<6>hdb: cache flushes not supported
<6> hdb: hdb1
<7>Probing IDE interface ide1...
<4>hdc: Pioneer DVD-ROM ATAPIModel DVD-120S, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
<4>PCI: setting IRQ 10 as level-triggered
<6>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
<6>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<4>        <Adaptec 2940 Ultra SCSI adapter>
<4>        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
<4>
<5>  Vendor: SEAGATE   Model: ST318275LW        Rev: 0001
<5>  Type:   Direct-Access                      ANSI SCSI revision: 02
<4>scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
<6> target0:0:0: Beginning Domain Validation
<6> target0:0:0: wide asynchronous.
<6> target0:0:0: Domain Validation skipping write tests
<6> target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
<6> target0:0:0: Ending Domain Validation
<5>SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
<5>SCSI device sda: drive cache: write through
<5>SCSI device sda: 35566480 512-byte hdwr sectors (18210 MB)
<5>SCSI device sda: drive cache: write through
<6> sda: sda1
<5>sd 0:0:0:0: Attached scsi disk sda
<5>  Vendor: SEAGATE   Model: ST39173LW         Rev: 6246
<5>  Type:   Direct-Access                      ANSI SCSI revision: 02
<4>scsi0:A:1:0: Tagged Queuing enabled.  Depth 32
<6> target0:0:1: Beginning Domain Validation
<6> target0:0:1: Domain Validation skipping write tests
<6> target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
<6> target0:0:1: Ending Domain Validation
<5>SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB)
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB)
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1
<5>sd 0:0:1:0: Attached scsi disk sdb
<7>libata version 1.12 loaded.
<7>sata_sil version 0.9
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
<4>PCI: setting IRQ 11 as level-triggered
<6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
<6>ata1: SATA max UDMA/100 cmd 0xE082AC80 ctl 0xE082AC8A bmdma 0xE082AC00 irq 11
<6>ata2: SATA max UDMA/100 cmd 0xE082ACC0 ctl 0xE082ACCA bmdma 0xE082AC08 irq 11
<6>ata1: no device found (phy stat 00000000)
<6>scsi1 : sata_sil
<6>ata2: no device found (phy stat 00000000)
<6>scsi2 : sata_sil
<6>ACPI: CPU0 (power states: C1[C1])
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<4>Attempting manual resume
<5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda2: using ordered data mode
<5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda2: checking transaction log (hda2)
<5>ReiserFS: hda2: Using r5 hash to sort names
<6>bootsplash: status on console 0 changed to on
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Dec  7 13:01:40 2005

Mounting shared memory FS on /dev/shmdone
Configuring serial ports...
Configured serial ports
doneActivating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Checking file systems...
fsck 1.38 (30-Jun-2005)
doneSetting up kernel module dependencies (if required)done
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
initramdevs on /dev type tmpfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
doneSetting up the CMOS clockdone
Setting up hostname 'linux'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
done
<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/udevd ]
Starting udevd done
Loading required kernel modules
doneStarting Firewall Initialization (phase 1 of 2) udevd-event[1606]: run_program: '/sbin/create_floppy_devices' abnormal exit

done
Creating /var/log/boot.msg
<notice>killproc: kill(933,29)
doneSuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
done
Restore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
Disabling IPv6 forwardingdone
Disabling IPv6 privacydone
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(933,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Wed Dec  7 13:01:56 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
Starting D-BUS daemondone
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Loading keymap i386/qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
doneSetting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
done    eth0      device: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 82)
    eth0      configuration: eth-id-00:07:e9:cb:5b:da
    eth0      is controlled by ifplugd
doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
Initializing random number generatordone
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
Starting mdnsddone
Starting resource manager<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
done
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/sbin/portmap ]
Mount SMB/ CIFS File Systems unused
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Starting nfsboot (sm-notify) done
Starting mail service (Postfix)done
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Checking/updating CPU microcodedone
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/powertweakd) [ /usr/sbin/powertweakd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/powertweakd ]
Starting service powertweakdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>pidofproc: dhcpcd 2950
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
Starting service kdmdone
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda2 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
done
done
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs nfs
<notice>killproc: kill(2468,3)