Bug 157578 - kernel crash when starting ndiswrapper
Summary: kernel crash when starting ndiswrapper
Status: RESOLVED WONTFIX
Alias: None
Product: SUSE LINUX 10.0
Classification: openSUSE
Component: Kernel (show other bugs)
Version: Final
Hardware: i586 SuSE Linux 10.0
: P5 - None : Major
Target Milestone: ---
Assignee: Karsten Keil
QA Contact: E-mail List
URL:
Whiteboard:
Keywords:
Depends on:
Blocks:
 
Reported: 2006-03-13 13:39 UTC by Dr. Rudolf Bauer
Modified: 2006-04-27 14:36 UTC (History)
0 users

See Also:
Found By: Integration Test
Services Priority:
Business Priority:
Blocker: ---
Marketing QA Status: ---
IT Deployment: ---

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.
Description Dr. Rudolf Bauer 2006-03-13 13:39:47 UTC 
I run Suse 10.0 on Dell8200 and local net with AVM7170 and AVM WLAN Stick USB.
Net is running well under Windows XP, but not working with ndiswrapper 1.2.2.
After doing modprobe, system is dead and can only being restarted after switching off.
Comment 1 Olaf Kirch 2006-03-13 13:45:00 UTC 
Where did you get ndiswrapper 1.2.2 from? SL10.0 comes with version 1.2.
Comment 2 Olaf Kirch 2006-03-17 14:21:18 UTC 
Karsten, could you track these, please?
Comment 3 Dr. Rudolf Bauer 2006-03-17 14:52:36 UTC 
Ich benutze die Original Suse 10.0 mit ndiswrapper 1.2 (-2), km_ndiswrapper und das wpa-modul. Soviel ich sehen konnte, generiert yast2 keinen Eintrag für wlan0 in  modprobe.conf und ndiswrapper startet dann nicht, obwohl die Hardwareerkennung des usb-wlan-sticks wohl ordnungsgemäss sowohl in dmesg und in der Hardware-Info angezeigt wird
Comment 4 Dr. Rudolf Bauer 2006-03-17 19:11:21 UTC 
Ich habe inzwischen durch experimentieren herausbekommen, dass die Eröffnung von wlan0 beim Systemstart nicht funktioniert, jedoch bei hotplugged oder manuell. Das System erkennt dann den stick übernimmt aber nicht die in Yast2 eingegebenen Parameter, erscheint nicht im Kinternet. Eine Internetverbindung lässt sich nicht starten. Ich füge Auszüge aus iwconfig und dmesg bei:
iwconfig
linux:~ # iwconfig

lo        no wireless extensions.



sit0      no wireless extensions.



wlan0     IEEE 802.11g  ESSID:off/any
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:00:00:00:00:00
          Bit Rate:54 Mb/s   Tx-Power:10 dBm   Sensitivity=0/3
          RTS thr:4096 B   Fragment thr:4096 B
          Encryption key:off
          Power Management:off
          Link Quality:100  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

linux:~ #

dmesg

scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610
 [<c02fa367>] schedule_timeout+0x47/0xb0
 [<c01246b0>] process_timeout+0x0/0x10

 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10
 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]

 [<c0255c3f>] driver_probe_device+0x2f/0x90
 [<c0255588>] bus_for_each_drv+0x38/0x60
 [<c0255cfb>] device_attach+0x4b/0x50
 [<c0255ca0>] __device_attach+0x0/0x10
 [<c02556b0>] bus_add_device+0x20/0x80
 [<c0254ac8>] device_add+0xa8/0x100

 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]
 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]
 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90
 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610

 [<c02fa367>] schedule_timeout+0x47/0xb0

 [<c01246b0>] process_timeout+0x0/0x10

 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]
 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10
 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]

 [<c0255c3f>] driver_probe_device+0x2f/0x90
 [<c0255588>] bus_for_each_drv+0x38/0x60
 [<c0255cfb>] device_attach+0x4b/0x50
 [<c0255ca0>] __device_attach+0x0/0x10

 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100

 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]
 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]
 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90
 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092
 [<c02f9bfc>] schedule+0x55c/0x610

 [<c02fa367>] schedule_timeout+0x47/0xb0

 [<c01246b0>] process_timeout+0x0/0x10

 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]
 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]
 [<c0255ca0>] __device_attach+0x0/0x10
 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]
 [<c0255c3f>] driver_probe_device+0x2f/0x90

 [<c0255588>] bus_for_each_drv+0x38/0x60
 [<c0255cfb>] device_attach+0x4b/0x50
 [<c0255ca0>] __device_attach+0x0/0x10

 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100

 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]
 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]

 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90
 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610
 [<c02fa367>] schedule_timeout+0x47/0xb0
 [<c01246b0>] process_timeout+0x0/0x10

 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10
 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]
 [<c0255c3f>] driver_probe_device+0x2f/0x90

 [<c0255588>] bus_for_each_drv+0x38/0x60

 [<c0255cfb>] device_attach+0x4b/0x50

 [<c0255ca0>] __device_attach+0x0/0x10

 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100
 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]

 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30
 [<c012db75>] kthread+0x85/0x90
 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610

 [<c02fa367>] schedule_timeout+0x47/0xb0

 [<c01246b0>] process_timeout+0x0/0x10
 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10
 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]

 [<c0255c3f>] driver_probe_device+0x2f/0x90

 [<c0255588>] bus_for_each_drv+0x38/0x60

 [<c0255cfb>] device_attach+0x4b/0x50

 [<c0255ca0>] __device_attach+0x0/0x10

 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100

 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]

 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90
 [<c012daf0>] kthread+0x0/0x90
 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610
 [<c02fa367>] schedule_timeout+0x47/0xb0
 [<c01246b0>] process_timeout+0x0/0x10

 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10

 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]

[<c0255c3f>] driver_probe_device+0x2f/0x90
 [<c0255588>] bus_for_each_drv+0x38/0x60
 [<c0255cfb>] device_attach+0x4b/0x50

 [<c0255ca0>] __device_attach+0x0/0x10

 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100

 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]

 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90

 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610
 [<c02fa367>] schedule_timeout+0x47/0xb0
 [<c01246b0>] process_timeout+0x0/0x10
 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]
 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

[<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10

 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]
 [<c0255c3f>] driver_probe_device+0x2f/0x90

 [<c0255588>] bus_for_each_drv+0x38/0x60

 [<c0255cfb>] device_attach+0x4b/0x50

 [<c0255ca0>] __device_attach+0x0/0x10

 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100
 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]
 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]

 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90

 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092

 [<c02f9bfc>] schedule+0x55c/0x610

 [<c02fa367>] schedule_timeout+0x47/0xb0
 [<c01246b0>] process_timeout+0x0/0x10
 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10

 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]

 [<c0255c3f>] driver_probe_device+0x2f/0x90
 [<c0255588>] bus_for_each_drv+0x38/0x60
 [<c0255cfb>] device_attach+0x4b/0x50
 [<c0255ca0>] __device_attach+0x0/0x10
 [<c02556b0>] bus_add_device+0x20/0x80

 [<c0254ac8>] device_add+0xa8/0x100

 [<d171cffb>] usb_set_configuration+0x20b/0x4d0 [usbcore]

 [<d171836d>] usb_new_device+0xed/0x170 [usbcore]

 [<d1719127>] hub_port_connect_change+0x2b7/0x340 [usbcore]

 [<d17193fd>] hub_events+0x24d/0x390 [usbcore]

 [<d1719540>] hub_thread+0x0/0xf0 [usbcore]

 [<d1719555>] hub_thread+0x15/0xf0 [usbcore]

 [<c012deb0>] autoremove_wake_function+0x0/0x30

 [<c012db75>] kthread+0x85/0x90

 [<c012daf0>] kthread+0x0/0x90

 [<c01012f1>] kernel_thread_helper+0x5/0x14
scheduling while atomic: khubd/0x00000100/2092
 [<c02f9bfc>] schedule+0x55c/0x610

 [<c02fa367>] schedule_timeout+0x47/0xb0

 [<c01246b0>] process_timeout+0x0/0x10

 [<d176cfa4>] KeWaitForMultipleObjects+0x434/0x7d0 [ndiswrapper]

 [<d176d37f>] KeWaitForSingleObject+0x2f/0x40 [ndiswrapper]

 [<d1763667>] miniport_init+0x57/0x60 [ndiswrapper]

 [<d1768c12>] ndiswrapper_add_usb_device+0xf2/0x1b0 [ndiswrapper]

 [<c0255ca0>] __device_attach+0x0/0x10
 [<d171606a>] usb_probe_interface+0x4a/0x60 [usbcore]

 [<c0255c3f>] driver_probe_device+0x2f/0x90

Die Definitionen für wlan0 in Yast2:

Drahtlos mit Modul ndiswrapper
Essid: wie von AVM vorgegeben "FRITZ!BOX Fon WLAN 7170-"
Managed mit WPA-PSK
Netzwerkschlüssel. wie von AVM vorgegeben. s:xxxxxxxxxxxxxxxx
ACPI off
Start: manuell
Übrige Angaben default
Comment 5 Karsten Keil 2006-04-27 14:36:48 UTC 
Sorry we cannot support any windows drivers via ndiswrapper, so YAST also do not configure such a setup.