Bugzilla – Bug 299575
Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load
Last modified: 2007-09-14 14:47:03 UTC
System maniboard: MSI K9A PLATINUM (SB600 / RD580) chipset CPU: Athlon64 5200 dual core RAM: 2 GB HD: Western Digital SATA2 Other: pata DVD writer I have a Athlon64 dual core in a MSI K9A PLATINUM motherboard, and for instaling OSS 10.2, I must to install with "install pci=nomsi" in the command line. Later I upgrade it to OSS 10.3 alpha 6, and it works without important problems (32 bit version). In the booth parameter uses But now I downloaded the kde x86-64 iso, verified the checksum, it was ok, and it will not install on my SB600 / RD580 based motherboard. I must boot in with the parameter "pci=nomsi" in 10.3 alpha 6, I triyed to remove it, and the system do'nt loads. I tryed with safe settings, acpi off, and with "install pci=nomsi", but the ahci module will not load. The bios is setted to "Native IDE", but it was the same in 10.2 and 10.3 alpha 6 if it was setted to "ahci". Other detail, after the upgrade to 10.3 alpha 6, I changed the dvd burner from a Asus ATAPI, to a LITE-ON DVDRW LH-20A1H (20x burning dvds), and I must to change the driver from the ide-generic to pata_atiixp, to lograte that it works with k3b. In the installation proces the system stops for about 2 minutes trying to load de ahci driver module (in 10.2 32 bits I got the same problem without the "install pci=nomsi" in the command line), but this option will not work now in 10.3 beta1 X86-64. Now the loaded modules for the disk controllers with 10.3 alpha 6 32 bits are: pata_atiixp 11904 0 ahci 25348 4 libata 120396 2 pata_atiixp,ahci scsi_mod 140248 5 usb_storage,sr_mod,sg,sd_mod,libata
Please post the result of 'lspci -nn' in bug 299010. Thanks. *** This bug has been marked as a duplicate of bug 299010 ***
The new kernel kernel-default-2.6.22.2-20070814064043 (32 bits) will not work without the pci=nomsi as boot parameter. If the new kernel where ok, it must booting without the pci=nomsiparameter. The 64 bits version of the kernel I could'nt test it because I do'nt have a install cd with the new kernel. The result of 'lspci -nn': 00:00.0 Host bridge [Class 0600]: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952] 00:02.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34] 00:06.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] 00:12.0 SATA controller [Class 0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] 00:13.0 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] 00:13.1 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] 00:13.2 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] 00:13.3 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] 00:13.4 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] 00:13.5 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] 00:14.0 SMBus [Class 0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 13) 00:14.1 IDE interface [Class 0101]: ATI Technologies Inc SB600 IDE [1002:438c] 00:14.2 Audio device [Class 0403]: ATI Technologies Inc SB600 Azalia [1002:4383] 00:14.3 ISA bridge [Class 0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] 00:14.4 PCI bridge [Class 0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] 00:18.0 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 01:00.0 VGA compatible controller [Class 0300]: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142] 01:00.1 Display controller [Class 0380]: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary) [1002:7162] 03:01.0 Multimedia video controller [Class 0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) 03:01.1 Multimedia controller [Class 0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) 03:02.0 FireWire (IEEE 1394) [Class 0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) 03:03.0 Ethernet controller [Class 0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10) The result of lspci -vvvvnn: 00:00.0 Host bridge [Class 0600]: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952] Subsystem: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 00:02.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 2, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device [1002:5952] Capabilities: [b8] HyperTransport: MSI Mapping 00:06.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 6, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device [1002:5952] Capabilities: [b8] HyperTransport: MSI Mapping 00:12.0 SATA controller [Class 0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7242] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at fe9ff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] #12 [0010] 00:13.0 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=4K] 00:13.1 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K] 00:13.2 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 20 Region 0: Memory at fe9fc000 (32-bit, non-prefetchable) [size=4K] 00:13.3 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe9fb000 (32-bit, non-prefetchable) [size=4K] 00:13.4 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 20 Region 0: Memory at fe9fa000 (32-bit, non-prefetchable) [size=4K] 00:13.5 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 18 Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [e4] Debug port 00:14.0 SMBus [Class 0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 13) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 0b00 [size=16] Capabilities: [b0] HyperTransport: MSI Mapping 00:14.1 IDE interface [Class 0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 00:14.2 Audio device [Class 0403]: ATI Technologies Inc SB600 Azalia [1002:4383] Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 17 Region 0: Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 00:14.3 ISA bridge [Class 0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7280] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:14.4 PCI bridge [Class 0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: fdf00000-fdffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- 00:18.0 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] HyperTransport: Host or Secondary Interface !!! Possibly incomplete decoding Command: WarmRst+ DblEnd- Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 Link Config: MLWI=16bit MLWO=16bit LWI=8bit LWO=8bit Revision ID: 1.02 00:18.1 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.2 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:18.3 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [f0] #0f [0010] 01:00.0 VGA compatible controller [Class 0300]: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142] (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:3000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at d000 [size=256] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <4us, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 01:00.1 Display controller [Class 0380]: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary) [1002:7162] Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:3001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at feae0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <4us, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 03:01.0 Multimedia video controller [Class 0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:01.1 Multimedia controller [Class 0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at fdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:02.0 FireWire (IEEE 1394) [Class 0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:280d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at e800 [size=128] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 03:03.0 Ethernet controller [Class 0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:280c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at e400 [size=256] Region 1: Memory at febff400 (32-bit, non-prefetchable) [size=256] Expansion ROM at fdf00000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
The sata driver of the chipset ATI sb600 from my mobo, appear as Si3112.sys in the drivers disk. The raid driver appear as Si3112r.sys. The linux version of this driver, is included in the ahci driver? As i see, i mean it must be sata_sil, or sata_sil24: http://article.gmane.org/gmane.linux.ide/11570
Alright, RD580 added to MSI blacklist. Will forward patch mainline too. Please test beta2 when it comes out and re-open if the problem persists. Your mobo doesn't have a sil controller. The driver is pata_atiixp.
Yes the driver for the new ide/atapi drives is pata_atiixp. For the old ide drives I could use the ide-generic driver, but with the new drives, i must use pata_atiixp module driver. For a dvd burner Asus ATAPI I used ide-generic, and for a LITE-ON DVDRW LH-20A1H (20x burning dvds), and I must to change the driver from the ide-generic to pata_atiixp, to lograte that it works with k3b. For the sata drives the driver appear as ahci in linux. I tryed to load the sata_sil module via modprobe, and it loads without errors. In the windows driver disk of the mobo MSI K9A PLATINUM (SB600 / RD580) chipset, appear Si3112.sys.
Resolving as FIXED.
After upgrading to beta 3, and rebooting, the system has entered in a fsck, and could not complete it. I must run it by hand, to resolve the problem, aparently caused by a buggy ahci driver. In dmesg I obtain: dmesg | grep ahci ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck led clo pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci The system hasother problems, such as the rpmdb crases (Bug #309354), and the crashes of some aplications such as audacity or amule, when it try to write to the hard disk (reopened Bug 294693).
I don't think you should hijack that bug
Juan, you need to open a separate bug report and we need more detail to determine what's going on. Those two messages are reporting that the driver is working around known problems and with those quirks applied it should work. Please open a separate bug report with more info (it would be great if you can retry it and see whether the problem is reproducible) and cc me. Thanks.